FCC ID 2AKA9-SXPCEAN2

PCI Express Half mini card WLAN module

by Solectria Renewables LLC

Grantee Code: 2AKA9   Product Code: SXPCEAN2
Latest application date: 2016-12-19

Device Images

FCC ID Device Details

FCC ID2AKA9-SXPCEAN2
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AKA9
Product CodeSXPCEAN2
Applicant BusinessSolectria Renewables LLC 🇺🇸
Related Domains solectria.com
Equipment ClassPCI Express Half mini card WLAN module
Test FirmBureau Veritas Consumer Products Services, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2016-12-19
5180-5320 MHzClass II permissive change or modification of presently authorized equipment2016-12-19
5180-5320 MHzChange in identification of presently authorized equipment. Original FCC ID: N6C-SXPCEAN2 Grant Date: 05/19/20162016-12-01
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: N6C-SXPCEAN2 Grant Date: 08/13/20152016-12-01

Exhibits

DocumentTypeAvailableFile
Installation manualUsers Manual2016-12-01PDF 94.6 KB
Users manualUsers Manual2016-12-01PDF 94.6 KB
Internal PhotosInternal Photos2016-12-19PDF 2.8 MB
Internal PhotosInternal Photos2016-12-01PDF 481.9 KB
External PhotosExternal Photos2016-12-19PDF 2.8 MB
External PhotosExternal Photos2016-12-01PDF 481.9 KB
LabelID Label/Location Info2016-12-01PDF 36.9 KB
Test setup photoTest Setup Photos2016-12-19PDF 324.3 KB
Test Report DTSTest Report2016-12-19PDF 4.3 MB
Test Report NIITest Report2016-12-19PDF 3.5 MB
Permissive Change Request LetterCover Letter(s)2016-12-19PDF 104.6 KB
Product Certification Rep Auth LetterCover Letter(s)2016-12-19PDF 211 KB
Authorization Letter from original applicantCover Letter(s)2016-12-01PDF 349.8 KB
Change of ID request LetterCover Letter(s)2016-12-01PDF 188 KB
MPE CalculationRF Exposure Info2016-12-19PDF 92.3 KB

Application Information

Application IDqr6szo77zFb4+SXqadXVbw==
Final Action Date2016-12-19
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0026015560
ModelSXPCEAN2
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionPCI Express Half mini card WLAN module
Responsible PartyAnita Rajan Worden, CEO, Anita.worden@solectria.com , 978-683-9700
AgentAnita Anita Anita, Ms
Test FirmSarb Shelopal, Bureau Veritas Consumer Products Services, Inc., Sarbjit.Shelopal@bureauveritas.com , +1 925 963 4420
TCB Emailtcb@siemic.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC to Add Omnidirectional, Vertical (linear) Polarization Antenna. Original Grant Comment: Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter.

Applications

Application IDDatePurpose
qr6szo77zFb4+SXqadXVbw==2016-12-19Class II permissive change or modification of presently authorized equipment
HP6P9ew4/jI9DCFQdJg1ig==2016-12-19Class II permissive change or modification of presently authorized equipment
lcBOHlOHfuL9XChEOzmiag==2016-12-01Change in identification of presently authorized equipment. Original FCC ID: N6C-SXPCEAN2 Grant Date: 05/19/2016
KLAT29FuekNpDnxAVz3bWg==2016-12-01Change in identification of presently authorized equipment. Original FCC ID: N6C-SXPCEAN2 Grant Date: 08/13/2015

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.583700015CCC, MO
5180-5320 MHz0.048515E38, CC, MO, ND
5500-5700 MHz0.042615E38, CC, MO, ND
5745-5825 MHz0.045815E38, CC, MO

Grants

TCB Grant - Application qr6szo77zFb4+SXqadXVbw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 12/19/2016

Application Dated: 12/19/2016
Solectria Renewables LLC
360 Merrimack Street
Bldg 9, Fl 2
Lawrence, MA 01843
 
Attention: Anita Rajan Worden , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AKA9-SXPCEAN2
Name of Grantee:  Solectria Renewables LLC
Equipment Class: Digital Transmission System
Notes: PCI Express Half mini card WLAN module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5837  

C2PC to Add Omnidirectional, Vertical (linear) Polarization Antenna.

Original Grant Comment: Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application qr6szo77zFb4+SXqadXVbw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Solectria Renewables LLC
360 Merrimack Street Bldg 9, Fl 2
Lawrence, MA 01843
United States
  Date of Grant: 12/19/2016

Application Dated: 12/19/2016
 
Attention: Anita Rajan Worden , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AKA9-SXPCEAN2
Name of Grantee:  Solectria Renewables LLC
Equipment Class: Digital Transmission System
Notes: PCI Express Half mini card WLAN module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5837  

C2PC to Add Omnidirectional, Vertical (linear) Polarization Antenna.

Original Grant Comment: Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application lcBOHlOHfuL9XChEOzmiag==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 12/01/2016

Application Dated: 12/01/2016
Solectria Renewables LLC
360 Merrimack Street
Bldg 9, Fl 2
Lawrence, MA 01843
 
Attention: Anita Rajan Worden , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AKA9-SXPCEAN2
Name of Grantee:  Solectria Renewables LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: PCI Express Half mini card WLAN module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO ND 15E 5180.0  -  5320.0 0.0485  
38 CC MO ND 15E 5500.0  -  5700.0 0.0426  
38 CC MO 15E 5745.0  -  5825.0 0.0458  

Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application lcBOHlOHfuL9XChEOzmiag==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Solectria Renewables LLC
360 Merrimack Street Bldg 9, Fl 2
Lawrence, MA 01843
United States
  Date of Grant: 12/01/2016

Application Dated: 12/01/2016
 
Attention: Anita Rajan Worden , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AKA9-SXPCEAN2
Name of Grantee:  Solectria Renewables LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: PCI Express Half mini card WLAN module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO ND 15E 5180.0  -  5320.0 0.0485  
38 CC MO ND 15E 5500.0  -  5700.0 0.0426  
38 CC MO 15E 5745.0  -  5825.0 0.0458  

Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application KLAT29FuekNpDnxAVz3bWg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 12/01/2016

Application Dated: 12/01/2016
Solectria Renewables LLC
360 Merrimack Street
Bldg 9, Fl 2
Lawrence, MA 01843
 
Attention: Anita Rajan Worden , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AKA9-SXPCEAN2
Name of Grantee:  Solectria Renewables LLC
Equipment Class: Digital Transmission System
Notes: PCI Express Half mini card WLAN module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5837  

Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application KLAT29FuekNpDnxAVz3bWg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Solectria Renewables LLC
360 Merrimack Street Bldg 9, Fl 2
Lawrence, MA 01843
United States
  Date of Grant: 12/01/2016

Application Dated: 12/01/2016
 
Attention: Anita Rajan Worden , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AKA9-SXPCEAN2
Name of Grantee:  Solectria Renewables LLC
Equipment Class: Digital Transmission System
Notes: PCI Express Half mini card WLAN module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5837  

Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application HP6P9ew4/jI9DCFQdJg1ig==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 12/19/2016

Application Dated: 12/19/2016
Solectria Renewables LLC
360 Merrimack Street
Bldg 9, Fl 2
Lawrence, MA 01843
 
Attention: Anita Rajan Worden , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AKA9-SXPCEAN2
Name of Grantee:  Solectria Renewables LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: PCI Express Half mini card WLAN module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO ND 15E 5180.0  -  5320.0 0.0485  
38 CC MO ND 15E 5500.0  -  5700.0 0.0426  
38 CC MO 15E 5745.0  -  5825.0 0.0458  

C2PC to Add Omnidirectional, Vertical (linear) Polarization Antenna.

Original Grant Comment: Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application HP6P9ew4/jI9DCFQdJg1ig==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Solectria Renewables LLC
360 Merrimack Street Bldg 9, Fl 2
Lawrence, MA 01843
United States
  Date of Grant: 12/19/2016

Application Dated: 12/19/2016
 
Attention: Anita Rajan Worden , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AKA9-SXPCEAN2
Name of Grantee:  Solectria Renewables LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: PCI Express Half mini card WLAN module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO ND 15E 5180.0  -  5320.0 0.0485  
38 CC MO ND 15E 5500.0  -  5700.0 0.0426  
38 CC MO 15E 5745.0  -  5825.0 0.0458  

C2PC to Add Omnidirectional, Vertical (linear) Polarization Antenna.

Original Grant Comment: Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: