FCC ID 2AKJ5-N31
AI-enabled fleet management in-vehicle device with WCDMA, LTE, WiFi and Bluetooth
by Nauto
Grantee Code: 2AKJ5 Product Code: N31
Latest application date: 2022-07-19
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-07-19 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-07-19 |
| 1860-1900 MHz | Class II permissive change or modification of presently authorized equipment | 2022-07-19 |
| 2402-2480 MHz | Original Equipment | 2021-01-04 |
| 668-693 MHz | Original Equipment | 2021-01-04 |
| 2402-2480 MHz | Original Equipment | 2021-01-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| NA User Manual Final | Users Manual | 2022-09-02 | PDF 1.3 MB |
| User Manual | Users Manual | 2021-02-18 | PDF 1.3 MB |
| Appendix A.2- Internal photo | Internal Photos | 2022-09-02 | PDF 5.4 MB |
| Internal Photos | Internal Photos | 2021-02-18 | PDF 5.3 MB |
| Appendix A.1-External photo | External Photos | 2022-09-02 | PDF 1.4 MB |
| External Photos | External Photos | 2021-02-18 | PDF 1.4 MB |
| Label | ID Label/Location Info | 2022-07-19 | PDF 5.3 MB |
| Label location | ID Label/Location Info | 2022-07-19 | PDF 60.5 KB |
| Label Info | ID Label/Location Info | 2021-01-04 | PDF 5.3 MB |
| Label Location | ID Label/Location Info | 2021-01-04 | PDF 60.5 KB |
| Label info | ID Label/Location Info | 2021-01-04 | PDF 5.3 MB |
| Appendix A.2 - WLAN Setup Photos | Test Setup Photos | 2022-09-02 | PDF 3 MB |
| Appendix A.3 - WWAN Setup Photos | Test Setup Photos | 2022-09-02 | PDF 2.5 MB |
| Tsup App A | Test Setup Photos | 2021-02-18 | PDF 3.7 MB |
| Test Setup Photos rev1 | Test Setup Photos | 2021-01-04 | PDF 397.8 KB |
| Appendix B.1 - LTE Band 13 | Test Report | 2022-07-19 | PDF 1.5 MB |
| SEWM2206000084RG01-FCC RF Test Report | Test Report | 2022-07-19 | PDF 1.2 MB |
| SEWM2206000084RG02-FCC 2.4GWIFI Test Report | Test Report | 2022-07-19 | PDF 3.2 MB |
| Appendix LTE Band 12 rev1 | Test Report | 2021-01-04 | PDF 4.5 MB |
| Appendix LTE Band 14 rev1 | Test Report | 2021-01-04 | PDF 3.2 MB |
| Appendix LTE Band 2 rev1 | Test Report | 2021-01-04 | PDF 2.9 MB |
| Appendix LTE Band 4 rev1 | Test Report | 2021-01-04 | PDF 2.9 MB |
| Appendix LTE Band 5 rev1 | Test Report | 2021-01-04 | PDF 2.2 MB |
| Appendix LTE Band 66 rev1 | Test Report | 2021-01-04 | PDF 2.9 MB |
| Appendix LTE Band 71 rev1 | Test Report | 2021-01-04 | PDF 2.2 MB |
| Appendix WCDMA rev1 | Test Report | 2021-01-04 | PDF 1.1 MB |
| RF Test Report rev1 | Test Report | 2021-01-04 | PDF 802.1 KB |
| TR 2.4G WLAN | Test Report | 2021-01-04 | PDF 4.6 MB |
| TR App B.1 WCDMA Bd II&V | Test Report | 2021-01-04 | PDF 1.2 MB |
| TR App B.2 LTE Bd 2 | Test Report | 2021-01-04 | PDF 2.8 MB |
| TR App B.3 | Test Report | 2021-01-04 | PDF 2.7 MB |
| TR App B.4 | Test Report | 2021-01-04 | PDF 2.1 MB |
| TR App B.5 | Test Report | 2021-01-04 | PDF 2.8 MB |
| TR App B.6 | Test Report | 2021-01-04 | PDF 2.1 MB |
| TR App B.7 | Test Report | 2021-01-04 | PDF 2.7 MB |
| TR App B.8 | Test Report | 2021-01-04 | PDF 2.1 MB |
| TR Bluetooth | Test Report | 2021-01-04 | PDF 3.7 MB |
| TR Bluetooth BLE | Test Report | 2021-01-04 | PDF 5.2 MB |
| Test Report 2.4G WIFI REV1 | Test Report | 2021-01-04 | PDF 4.6 MB |
| Test Report BLE REV1 | Test Report | 2021-01-04 | PDF 3.1 MB |
| Test Report BT rev1 | Test Report | 2021-01-04 | PDF 3.6 MB |
| ZR20209005901-RF TEST REPORT | Test Report | 2021-01-04 | PDF 687.5 KB |
| Declaration of Authorization | Cover Letter(s) | 2022-07-19 | PDF 61.6 KB |
| Model Declaration of differences---0711 | Cover Letter(s) | 2022-07-19 | PDF 25.6 KB |
| class II change request letter | Cover Letter(s) | 2022-07-19 | PDF 158.7 KB |
| confidential document | Cover Letter(s) | 2022-07-19 | PDF 151.6 KB |
| Amendment Letter | Cover Letter(s) | 2021-01-04 | PDF 63.6 KB |
| Channel Declaration | Cover Letter(s) | 2021-01-04 | PDF 72.2 KB |
| Channel Declaration letter | Cover Letter(s) | 2021-01-04 | PDF 72.2 KB |
| Confidentiality Letter | Cover Letter(s) | 2021-01-04 | PDF 73.9 KB |
| Confidentiality letter | Cover Letter(s) | 2021-01-04 | PDF 73.9 KB |
| POA Letter | Cover Letter(s) | 2021-01-04 | PDF 105 KB |
| SDoC Letter | Cover Letter(s) | 2021-01-04 | PDF 76.6 KB |
| Third Party Conf Req N7NWP76B | Cover Letter(s) | 2021-01-04 | PDF 537.1 KB |
| Third Party Conf Req Nautos | Cover Letter(s) | 2021-01-04 | PDF 646.8 KB |
| Third Party Conf Request N7NWP76B | Cover Letter(s) | 2021-01-04 | PDF 537.1 KB |
| Third Party Conf Request Nautos | Cover Letter(s) | 2021-01-04 | PDF 646.8 KB |
| SEWM2206000084RG04-FCC MPE Report | RF Exposure Info | 2022-07-19 | PDF 646 KB |
| MPE Report | RF Exposure Info | 2021-01-04 | PDF 284.7 KB |
| Block Diagram Metadata only | Block Diagram | PDF 254.7 KB | |
| N3 Block Diagram Metadata only | Block Diagram | PDF 648.9 KB | |
| SCH Metadata only | Schematics | PDF 1.7 MB | |
| Sch PCB Placements Metadata only | Schematics | PDF 398.3 KB | |
| Sch WP7611 Metadata only | Schematics | PDF 230.2 KB | |
| Schematics Metadata only | Schematics | PDF 1.7 MB | |
| Operation Description NA Metadata only | Operational Description | PDF 814.2 KB | |
| Operational Description Metadata only | Operational Description | PDF 244.7 KB | |
| Parts List BOM Metadata only | Parts List/Tune Up Info | PDF 83.3 KB | |
| SA191L_MB_V1_MBOM_D.2_220701_BOM Metadata only | Parts List/Tune Up Info | PDF 85.3 KB | |
| Tune Up Procedure Metadata only | Parts List/Tune Up Info | PDF 112.5 KB | |
| Tune up Metadata only | Parts List/Tune Up Info | PDF 648.9 KB |
Application Information
| Application ID | RB0IonTRIqm6v8EO85hFnw== |
|---|---|
| Final Action Date | 2022-07-19 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0026085175 |
| Model | N31 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | AI-enabled fleet management in-vehicle device with WCDMA, LTE, WiFi and Bluetooth |
| Responsible Party | Phil Connolly, On-Boarding Program Manager, phil.connolly@nauto.com  , 8886288606 |
| Test Firm | Vinny Chen, SGS-CSTC Standards Technical Services (Suzhou) Co., Vinny.Chen@sgs.com  , +86 13728676901 |
| TCB Email | bentje.holger@phoenix-testlab.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 09/02/2022 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co- location requirements of Part 1.1307(b)(3). Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 20 and 40 MHz bandwidth modes. Class II Permissive Change for use software to add LTE band 13 and add the new Heatsink&Fan&LDO&DDR interface conversion chip supplier. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| RB0IonTRIqm6v8EO85hFnw== | 2022-07-19 | Class II permissive change or modification of presently authorized equipment |
| Id/RhwFeMgddAVe0JZdJhw== | 2022-07-19 | Class II permissive change or modification of presently authorized equipment |
| DVH/EkV4p2zyWc9xCWmoJA== | 2022-07-19 | Class II permissive change or modification of presently authorized equipment |
| R0I0gJ3KL8CPagjRSlD+Ng== | 2021-01-04 | Original Equipment |
| KvfHHnuMxgtu6KFi2yqT9w== | 2021-01-04 | Original Equipment |
| 3gQaDaBlUcDloZxin18z7A== | 2021-01-04 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 668-693 MHz | 0.155 | 0.1ppm | 8M93G7D | 27 | |
| 673-688 MHz | 0.152 | 0.1ppm | 17M9G7D | 27 | |
| 673-688 MHz | 0.11 | 0.1ppm | 5M12W7D | 27 | |
| 701.5-713.5 MHz | 0.161 | 0.1ppm | 4M47G7D | 27 | |
| 701.5-713.5 MHz | 0.1 | 0.1ppm | 4M49W7D | 27 | |
| 704-711 MHz | 0.142 | 0.1ppm | 8M93G7D | 27 | |
| 704-711 MHz | 0.094 | 0.1ppm | 4M89W7D | 27 | |
| 779.5-784.5 MHz | 0.156 | 0.1ppm | 4M47G7D | 27 | |
| 782 MHz | 0.151 | 0.1ppm | 8M91G7D | 27 | |
| 782 MHz | 0.126 | 0.1ppm | 8M89W7D | 27 | |
| 790.5-795.5 MHz | 0.114 | 0.1ppm | 4M49W7D | 9 | |
| 793 MHz | 0.161 | 0.1ppm | 8M91G7D | 9 | |
| 793 MHz | 0.098 | 0.1ppm | 4M86W7D | 9 | |
| 829-844 MHz | 0.11 | 0.1ppm | 4M90W7D | 22H | |
| 829-844 MHz | 0.143 | 0.1ppm | 8M93G7D | 22H | |
| 1712.5-1752.5 MHz | 0.262 | 0.1ppm | 4M48G7D | 27 | |
| 1717.5-1772.5 MHz | 0.172 | 0.1ppm | 5M10W7D | 27 | |
| 1720-1770 MHz | 0.229 | 0.1ppm | 17M9G7D | 27 | |
| 1720-1770 MHz | 0.169 | 0.1ppm | 5M20W7D | 27 | |
| 1720-1745 MHz | 0.252 | 0.1ppm | 17M9G7D | 27 | |
| 1720-1745 MHz | 0.187 | 0.1ppm | 5M20W7D | 27 | |
| 1852.4-1907.6 MHz | 0.247 | 0.1ppm | 4M15F9W | 24E | |
| 1857.5-1902.5 MHz | 0.187 | 0.1ppm | 5M07W7D | 24E | |
| 1860-1900 MHz | 0.264 | 0.1ppm | 17M9G7D | 24E | |
| 1860-1900 MHz | 0.172 | 0.1ppm | 5M20W7D | 24E | |
| 2402-2480 MHz | 0.0160000 | 15C | CC | ||
| 2402-2480 MHz | 0.005 | 15C | CC | ||
| 2412-2462 MHz | 0.04 | 15C | CC |
Grants
TCB Grant - Application RB0IonTRIqm6v8EO85hFnw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 07/19/2022 Application Dated: 07/17/2022 |
| Nauto |
| 220 Portage Ave |
| PaloAlto, CA 94306 |
| Attention: Phil Connolly , On-Boarding Program Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AKJ5-N31 |
| Name of Grantee: | Nauto |
| Equipment Class: | Digital Transmission System |
| Notes: | AI-enabled fleet management in-vehicle device with WCDMA, LTE, WiFi and Bluetooth |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.04 |
| Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co- location requirements of Part 1.1307(b)(3). Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 20 and 40 MHz bandwidth modes. Class II Permissive Change for use software to add LTE band 13 and add the new Heatsink&Fan&LDO&DDR interface conversion chip supplier. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application RB0IonTRIqm6v8EO85hFnw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nauto 220 Portage Ave PaloAlto, CA 94306 United States |
Date of Grant: 07/19/2022 Application Dated: 07/17/2022 |
| Attention: Phil Connolly , On-Boarding Program Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AKJ5-N31 |
| Name of Grantee: | Nauto |
| Equipment Class: | Digital Transmission System |
| Notes: | AI-enabled fleet management in-vehicle device with WCDMA, LTE, WiFi and Bluetooth |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.04 |
| Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co- location requirements of Part 1.1307(b)(3). Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 20 and 40 MHz bandwidth modes. Class II Permissive Change for use software to add LTE band 13 and add the new Heatsink&Fan&LDO&DDR interface conversion chip supplier. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 01/04/2021 Application Dated: 01/04/2021 |
| Nauto |
| 220 Portage Ave |
| PaloAlto, CA 94306 |
| Attention: Phil Connolly , On-Boarding Program Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AKJ5-N31 |
| Name of Grantee: | Nauto |
| Equipment Class: | Digital Transmission System |
| Notes: | In-vehicle Camera |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.04 |
| Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application R0I0gJ3KL8CPagjRSlD+Ng==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nauto 220 Portage Ave PaloAlto, CA 94306 United States |
Date of Grant: 01/04/2021 Application Dated: 01/04/2021 |
| Attention: Phil Connolly , On-Boarding Program Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AKJ5-N31 |
| Name of Grantee: | Nauto |
| Equipment Class: | Digital Transmission System |
| Notes: | In-vehicle Camera |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.04 |
| Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 01/04/2021 Application Dated: 01/04/2021 |
| Nauto |
| 220 Portage Ave |
| PaloAlto, CA 94306 |
| Attention: Phil Connolly , On-Boarding Program Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AKJ5-N31 |
| Name of Grantee: | Nauto |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | In-vehicle Camera |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 826.4 - 846.6 | 0.148 | 0.1 PM | 4M17F9W | |
| 24E | 1852.4 - 1907.6 | 0.247 | 0.1 PM | 4M15F9W | |
| 24E | 1860.0 - 1900.0 | 0.264 | 0.1 PM | 17M9G7D | |
| 24E | 1860.0 - 1900.0 | 0.172 | 0.1 PM | 5M20W7D | |
| 24E | 1857.5 - 1902.5 | 0.187 | 0.1 PM | 5M07W7D | |
| 27 | 1720.0 - 1745.0 | 0.252 | 0.1 PM | 17M9G7D | |
| 27 | 1712.5 - 1752.5 | 0.262 | 0.1 PM | 4M48G7D | |
| 27 | 1720.0 - 1745.0 | 0.187 | 0.1 PM | 5M20W7D | |
| 22H | 829.0 - 844.0 | 0.143 | 0.1 PM | 8M93G7D | |
| 22H | 829.0 - 844.0 | 0.11 | 0.1 PM | 4M90W7D | |
| 27 | 704.0 - 711.0 | 0.142 | 0.1 PM | 8M93G7D | |
| 27 | 701.5 - 713.5 | 0.161 | 0.1 PM | 4M47G7D | |
| 27 | 704.0 - 711.0 | 0.094 | 0.1 PM | 4M89W7D | |
| 27 | 701.5 - 713.5 | 0.1 | 0.1 PM | 4M49W7D | |
| 90 | 793.0 - 793.0 | 0.161 | 0.1 PM | 8M91G7D | |
| 90 | 793.0 - 793.0 | 0.098 | 0.1 PM | 4M86W7D | |
| 90 | 790.5 - 795.5 | 0.114 | 0.1 PM | 4M49W7D | |
| 27 | 1720.0 - 1770.0 | 0.229 | 0.1 PM | 17M9G7D | |
| 27 | 1720.0 - 1770.0 | 0.169 | 0.1 PM | 5M20W7D | |
| 27 | 1717.5 - 1772.5 | 0.172 | 0.1 PM | 5M10W7D | |
| 27 | 673.0 - 688.0 | 0.152 | 0.1 PM | 17M9G7D | |
| 27 | 668.0 - 693.0 | 0.155 | 0.1 PM | 8M93G7D | |
| 27 | 673.0 - 688.0 | 0.11 | 0.1 PM | 5M12W7D |
| Output Power is EIRP and ERP for above and below 1 GHz, respectively. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for LTE Band 5 and 12; ; LTE of 5 and 10 MHz bandwidth modes for LTE Band 14; LTE of 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 71. |
EAS Grant - Application KvfHHnuMxgtu6KFi2yqT9w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nauto 220 Portage Ave PaloAlto, CA 94306 United States |
Date of Grant: 01/04/2021 Application Dated: 01/04/2021 |
| Attention: Phil Connolly , On-Boarding Program Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AKJ5-N31 |
| Name of Grantee: | Nauto |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | In-vehicle Camera |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 826.4 - 846.6 | 0.148 | 0.1 PM | 4M17F9W | |
| 24E | 1852.4 - 1907.6 | 0.247 | 0.1 PM | 4M15F9W | |
| 24E | 1860.0 - 1900.0 | 0.264 | 0.1 PM | 17M9G7D | |
| 24E | 1860.0 - 1900.0 | 0.172 | 0.1 PM | 5M20W7D | |
| 24E | 1857.5 - 1902.5 | 0.187 | 0.1 PM | 5M07W7D | |
| 27 | 1720.0 - 1745.0 | 0.252 | 0.1 PM | 17M9G7D | |
| 27 | 1712.5 - 1752.5 | 0.262 | 0.1 PM | 4M48G7D | |
| 27 | 1720.0 - 1745.0 | 0.187 | 0.1 PM | 5M20W7D | |
| 22H | 829.0 - 844.0 | 0.143 | 0.1 PM | 8M93G7D | |
| 22H | 829.0 - 844.0 | 0.11 | 0.1 PM | 4M90W7D | |
| 27 | 704.0 - 711.0 | 0.142 | 0.1 PM | 8M93G7D | |
| 27 | 701.5 - 713.5 | 0.161 | 0.1 PM | 4M47G7D | |
| 27 | 704.0 - 711.0 | 0.094 | 0.1 PM | 4M89W7D | |
| 27 | 701.5 - 713.5 | 0.1 | 0.1 PM | 4M49W7D | |
| 90 | 793.0 - 793.0 | 0.161 | 0.1 PM | 8M91G7D | |
| 90 | 793.0 - 793.0 | 0.098 | 0.1 PM | 4M86W7D | |
| 90 | 790.5 - 795.5 | 0.114 | 0.1 PM | 4M49W7D | |
| 27 | 1720.0 - 1770.0 | 0.229 | 0.1 PM | 17M9G7D | |
| 27 | 1720.0 - 1770.0 | 0.169 | 0.1 PM | 5M20W7D | |
| 27 | 1717.5 - 1772.5 | 0.172 | 0.1 PM | 5M10W7D | |
| 27 | 673.0 - 688.0 | 0.152 | 0.1 PM | 17M9G7D | |
| 27 | 668.0 - 693.0 | 0.155 | 0.1 PM | 8M93G7D | |
| 27 | 673.0 - 688.0 | 0.11 | 0.1 PM | 5M12W7D |
| Output Power is EIRP and ERP for above and below 1 GHz, respectively. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for LTE Band 5 and 12; ; LTE of 5 and 10 MHz bandwidth modes for LTE Band 14; LTE of 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 71. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 07/19/2022 Application Dated: 07/17/2022 |
| Nauto |
| 220 Portage Ave |
| PaloAlto, CA 94306 |
| Attention: Phil Connolly , On-Boarding Program Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AKJ5-N31 |
| Name of Grantee: | Nauto |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AI-enabled fleet management in-vehicle device with WCDMA, LTE, WiFi and Bluetooth |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 |
| Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source- based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Class II Permissive Change for use software to add LTE band 13 and add the new Heatsink&Fan&LDO&DDR interface conversion chip supplier. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Id/RhwFeMgddAVe0JZdJhw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nauto 220 Portage Ave PaloAlto, CA 94306 United States |
Date of Grant: 07/19/2022 Application Dated: 07/17/2022 |
| Attention: Phil Connolly , On-Boarding Program Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AKJ5-N31 |
| Name of Grantee: | Nauto |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AI-enabled fleet management in-vehicle device with WCDMA, LTE, WiFi and Bluetooth |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 |
| Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source- based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Class II Permissive Change for use software to add LTE band 13 and add the new Heatsink&Fan&LDO&DDR interface conversion chip supplier. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 07/19/2022 Application Dated: 07/17/2022 |
| Nauto |
| 220 Portage Ave |
| PaloAlto, CA 94306 |
| Attention: Phil Connolly , On-Boarding Program Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AKJ5-N31 |
| Name of Grantee: | Nauto |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | AI-enabled fleet management in-vehicle device with WCDMA, LTE, WiFi and Bluetooth |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 826.4 - 846.6 | 0.148 | 0.1 PM | 4M17F9W | |
| 22H | 829.0 - 844.0 | 0.143 | 0.1 PM | 8M93G7D | |
| 22H | 829.0 - 844.0 | 0.11 | 0.1 PM | 4M90W7D | |
| 24E | 1852.4 - 1907.6 | 0.247 | 0.1 PM | 4M15F9W | |
| 24E | 1860.0 - 1900.0 | 0.264 | 0.1 PM | 17M9G7D | |
| 24E | 1860.0 - 1900.0 | 0.172 | 0.1 PM | 5M20W7D | |
| 24E | 1857.5 - 1902.5 | 0.187 | 0.1 PM | 5M07W7D | |
| 27 | 1720.0 - 1745.0 | 0.252 | 0.1 PM | 17M9G7D | |
| 27 | 1720.0 - 1745.0 | 0.187 | 0.1 PM | 5M20W7D | |
| 27 | 1712.5 - 1752.5 | 0.262 | 0.1 PM | 4M48G7D | |
| 27 | 704.0 - 711.0 | 0.142 | 0.1 PM | 8M93G7D | |
| 27 | 704.0 - 711.0 | 0.094 | 0.1 PM | 4M89W7D | |
| 27 | 701.5 - 713.5 | 0.161 | 0.1 PM | 4M47G7D | |
| 27 | 701.5 - 713.5 | 0.1 | 0.1 PM | 4M49W7D | |
| 27 | 782.0 - 782.0 | 0.151 | 0.1 PM | 8M91G7D | |
| 27 | 782.0 - 782.0 | 0.126 | 0.1 PM | 8M89W7D | |
| 27 | 779.5 - 784.5 | 0.156 | 0.1 PM | 4M47G7D | |
| 27 | 1720.0 - 1770.0 | 0.229 | 0.1 PM | 17M9G7D | |
| 27 | 1720.0 - 1770.0 | 0.169 | 0.1 PM | 5M20W7D | |
| 27 | 1717.5 - 1772.5 | 0.172 | 0.1 PM | 5M10W7D | |
| 27 | 673.0 - 688.0 | 0.152 | 0.1 PM | 17M9G7D | |
| 27 | 673.0 - 688.0 | 0.11 | 0.1 PM | 5M12W7D | |
| 27 | 668.0 - 693.0 | 0.155 | 0.1 PM | 8M93G7D | |
| 90 | 793.0 - 793.0 | 0.161 | 0.1 PM | 8M91G7D | |
| 90 | 793.0 - 793.0 | 0.098 | 0.1 PM | 4M86W7D | |
| 90 | 790.5 - 795.5 | 0.114 | 0.1 PM | 4M49W7D |
| Output Power is EIRP and ERP for above and below 1 GHz, respectively. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for LTE Band 5 and 12; ; LTE of 5 and 10 MHz bandwidth modes for LTE Band 14; LTE of 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 71.
Class II Permissive Change for use software to add LTE band 13 and add the new Heatsink&Fan&LDO&DDR interface conversion chip supplier. This device supports: LTE of 5, 10 MHz bandwidth modes for LTE Band 13. |
EAS Grant - Application DVH/EkV4p2zyWc9xCWmoJA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nauto 220 Portage Ave PaloAlto, CA 94306 United States |
Date of Grant: 07/19/2022 Application Dated: 07/17/2022 |
| Attention: Phil Connolly , On-Boarding Program Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AKJ5-N31 |
| Name of Grantee: | Nauto |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | AI-enabled fleet management in-vehicle device with WCDMA, LTE, WiFi and Bluetooth |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 826.4 - 846.6 | 0.148 | 0.1 PM | 4M17F9W | |
| 22H | 829.0 - 844.0 | 0.143 | 0.1 PM | 8M93G7D | |
| 22H | 829.0 - 844.0 | 0.11 | 0.1 PM | 4M90W7D | |
| 24E | 1852.4 - 1907.6 | 0.247 | 0.1 PM | 4M15F9W | |
| 24E | 1860.0 - 1900.0 | 0.264 | 0.1 PM | 17M9G7D | |
| 24E | 1860.0 - 1900.0 | 0.172 | 0.1 PM | 5M20W7D | |
| 24E | 1857.5 - 1902.5 | 0.187 | 0.1 PM | 5M07W7D | |
| 27 | 1720.0 - 1745.0 | 0.252 | 0.1 PM | 17M9G7D | |
| 27 | 1720.0 - 1745.0 | 0.187 | 0.1 PM | 5M20W7D | |
| 27 | 1712.5 - 1752.5 | 0.262 | 0.1 PM | 4M48G7D | |
| 27 | 704.0 - 711.0 | 0.142 | 0.1 PM | 8M93G7D | |
| 27 | 704.0 - 711.0 | 0.094 | 0.1 PM | 4M89W7D | |
| 27 | 701.5 - 713.5 | 0.161 | 0.1 PM | 4M47G7D | |
| 27 | 701.5 - 713.5 | 0.1 | 0.1 PM | 4M49W7D | |
| 27 | 782.0 - 782.0 | 0.151 | 0.1 PM | 8M91G7D | |
| 27 | 782.0 - 782.0 | 0.126 | 0.1 PM | 8M89W7D | |
| 27 | 779.5 - 784.5 | 0.156 | 0.1 PM | 4M47G7D | |
| 27 | 1720.0 - 1770.0 | 0.229 | 0.1 PM | 17M9G7D | |
| 27 | 1720.0 - 1770.0 | 0.169 | 0.1 PM | 5M20W7D | |
| 27 | 1717.5 - 1772.5 | 0.172 | 0.1 PM | 5M10W7D | |
| 27 | 673.0 - 688.0 | 0.152 | 0.1 PM | 17M9G7D | |
| 27 | 673.0 - 688.0 | 0.11 | 0.1 PM | 5M12W7D | |
| 27 | 668.0 - 693.0 | 0.155 | 0.1 PM | 8M93G7D | |
| 90 | 793.0 - 793.0 | 0.161 | 0.1 PM | 8M91G7D | |
| 90 | 793.0 - 793.0 | 0.098 | 0.1 PM | 4M86W7D | |
| 90 | 790.5 - 795.5 | 0.114 | 0.1 PM | 4M49W7D |
| Output Power is EIRP and ERP for above and below 1 GHz, respectively. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for LTE Band 5 and 12; ; LTE of 5 and 10 MHz bandwidth modes for LTE Band 14; LTE of 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 71.
Class II Permissive Change for use software to add LTE band 13 and add the new Heatsink&Fan&LDO&DDR interface conversion chip supplier. This device supports: LTE of 5, 10 MHz bandwidth modes for LTE Band 13. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 01/04/2021 Application Dated: 01/04/2021 |
| Nauto |
| 220 Portage Ave |
| PaloAlto, CA 94306 |
| Attention: Phil Connolly , On-Boarding Program Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AKJ5-N31 |
| Name of Grantee: | Nauto |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | In-vehicle Camera |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 |
| Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 3gQaDaBlUcDloZxin18z7A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nauto 220 Portage Ave PaloAlto, CA 94306 United States |
Date of Grant: 01/04/2021 Application Dated: 01/04/2021 |
| Attention: Phil Connolly , On-Boarding Program Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AKJ5-N31 |
| Name of Grantee: | Nauto |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | In-vehicle Camera |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 |
| Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |