FCC ID 2AKPISWWHDINTCAM

Swann Wireless HD Smart Security Camera

by SWANN COMMUNICATIONS LIMITED

Grantee Code: 2AKPI   Product Code: SWWHDINTCAM
Latest application date: 2017-09-15

FCC ID Device Details

FCC ID2AKPISWWHDINTCAM
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AKPI
Product CodeSWWHDINTCAM
Applicant BusinessSWANN COMMUNICATIONS LIMITED
Related Domains swann.com
Equipment ClassSwann Wireless HD Smart Security Camera
Test FirmBTL Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2017-09-15
2412-2462 MHzOriginal Equipment2017-09-15

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2017-09-15PDF 870.8 KB
Internal PhotosInternal Photos2017-09-15PDF 1.5 MB
External PhotosExternal Photos2017-09-15PDF 1.8 MB
ID Label and Location InfoID Label/Location Info2017-09-15PDF 1.2 MB
Test Setup photosTest Setup Photos2017-09-15PDF 454.1 KB
Test Setup photosTest Setup Photos2017-09-15PDF 454.1 KB
Test Report_NII_Part 1 of 2Test Report2017-09-15PDF 4 MB
Test Report_NII_Part 2 of 2Test Report2017-09-15PDF 4.1 MB
Test Report_Part 1 of 2Test Report2017-09-15PDF 2.8 MB
Test Report_Part 2 of 2Test Report2017-09-15PDF 3.8 MB
Agency LetterCover Letter(s)2017-09-15PDF 58 KB
Confidentiality LetterCover Letter(s)2017-09-15PDF 70.8 KB
RF Exposure InfoRF Exposure Info2017-09-15PDF 176.3 KB
RF Exposure InfoRF Exposure Info2017-09-15PDF 172.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 196.6 KB
Schematics Metadata onlySchematicsPDF 832.6 KB
Operational Description Metadata onlyOperational DescriptionPDF 225.5 KB
Operational Description_Software Security Description Metadata onlyOperational DescriptionPDF 140.2 KB

Application Information

Application IDksiYc3wIyOCvGgt5aJpStw==
Final Action Date2017-09-15
Application PurposeOriginal Equipment
Applicant FRN0026120097
ModelSWWHDINTCAM
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionSwann Wireless HD Smart Security Camera
Responsible PartyPatrick Tse, Senior Product Development Manager, patrickt@swann.com , +85234212843
Test FirmDaisy Dai, BTL Inc., daisy.dai@btl.org.cn , 008676983183000
TCB Emailfcb@us.tuv.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains WLAN 802.11 b/g/n transmitters. This device has 20/40 MHz bandwidth modes.

Applications

Application IDDatePurpose
ksiYc3wIyOCvGgt5aJpStw==2017-09-15Original Equipment
Mo7SMsEPzHCG4Uyw1JywJg==2017-09-15Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.254000015CCC
5180-5240 MHz0.05515E38, CC
5745-5825 MHz0.04715E38, CC

Grants

TCB Grant - Application Mo7SMsEPzHCG4Uyw1JywJg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 09/15/2017

Application Dated: 09/15/2017
SWANN COMMUNICATIONS LIMITED
13D, Eton Building, No.288 Des Voeux Road Central
Sheung Wan,
Hong Kong
 
Attention: Patrick Tse , Senior Product Development Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AKPISWWHDINTCAM
Name of Grantee:  SWANN COMMUNICATIONS LIMITED
Equipment Class: Digital Transmission System
Notes: Swann Wireless HD Smart Security Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.254  

Power output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains WLAN 802.11 a/n transmitters.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Mo7SMsEPzHCG4Uyw1JywJg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SWANN COMMUNICATIONS LIMITED
13D, Eton Building, No.288 Des Voeux Road Central
Sheung Wan,
Hong Kong
  Date of Grant: 09/15/2017

Application Dated: 09/15/2017
 
Attention: Patrick Tse , Senior Product Development Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AKPISWWHDINTCAM
Name of Grantee:  SWANN COMMUNICATIONS LIMITED
Equipment Class: Digital Transmission System
Notes: Swann Wireless HD Smart Security Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.254  

Power output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains WLAN 802.11 a/n transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application ksiYc3wIyOCvGgt5aJpStw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 09/15/2017

Application Dated: 09/15/2017
SWANN COMMUNICATIONS LIMITED
13D, Eton Building, No.288 Des Voeux Road Central
Sheung Wan,
Hong Kong
 
Attention: Patrick Tse , Senior Product Development Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AKPISWWHDINTCAM
Name of Grantee:  SWANN COMMUNICATIONS LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Swann Wireless HD Smart Security Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.055  
38 CC 15E 5745.0  -  5825.0 0.047  

Power output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains WLAN 802.11 b/g/n transmitters. This device has 20/40 MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ksiYc3wIyOCvGgt5aJpStw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SWANN COMMUNICATIONS LIMITED
13D, Eton Building, No.288 Des Voeux Road Central
Sheung Wan,
Hong Kong
  Date of Grant: 09/15/2017

Application Dated: 09/15/2017
 
Attention: Patrick Tse , Senior Product Development Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AKPISWWHDINTCAM
Name of Grantee:  SWANN COMMUNICATIONS LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Swann Wireless HD Smart Security Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.055  
38 CC 15E 5745.0  -  5825.0 0.047  

Power output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains WLAN 802.11 b/g/n transmitters. This device has 20/40 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: