FCC ID 2AKSM-SAFE4

PLMR Amplifier

by Safe-Com Wireless

Grantee Code: 2AKSM   Product Code: SAFE4
Latest application date: 2025-03-26

FCC ID Device Details

FCC ID2AKSM-SAFE4
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AKSM
Product CodeSAFE4
Applicant BusinessSafe-Com Wireless 🇺🇸
Related Domains safe-comwireless.com
Equipment ClassPLMR Amplifier
Test FirmUS Tech

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
150.8-156.248 MHzClass II permissive change or modification of presently authorized equipment2025-03-26
851-869 MHzOriginal Equipment2025-02-10

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2025-02-10PDF 327.8 KB
External PhotosExternal Photos2025-03-26PDF 477 KB
External PhotosExternal Photos2025-02-10PDF 591.4 KB
Label SampleID Label/Location Info2025-02-10PDF 285.4 KB
TSUPTest Setup Photos2025-03-26PDF 797.2 KB
TSUPTest Setup Photos2025-02-10PDF 733.1 KB
Test ReportTest Report2025-03-26PDF 1.9 MB
Test Report Annex ATest Report2025-02-10PDF 425.9 KB
Test Report pt. 1Test Report2025-02-10PDF 4.4 MB
Test Report pt. 2Test Report2025-02-10PDF 2.8 MB
Test Report pt. 3Test Report2025-02-10PDF 1,018.4 KB
Att Statements 2.911(d)(5)(7)Attestation Statements2025-03-26PDF 153 KB
Att Statements 2.911(d)(5)(i)Attestation Statements2025-03-26PDF 146.8 KB
Att Statements 2.911(d)(5)(ii)Attestation Statements2025-03-26PDF 146.2 KB
Labels Attestation LetterCover Letter(s)2025-02-10PDF 168.5 KB
Authorization LetterCover Letter(s)2025-03-26PDF 228.1 KB
C2PC LetterCover Letter(s)2025-03-26PDF 40.8 KB
Confidentiality LetterCover Letter(s)2025-03-26PDF 101.4 KB
Confidentiality LetterCover Letter(s)2025-02-10PDF 79.3 KB
RF Exposure MPERF Exposure Info2025-03-26PDF 145 KB
RF Exposure MPERF Exposure Info2025-02-10PDF 137.6 KB
Internal Photos Metadata onlyInternal PhotosPDF 730.7 KB
Internal Photos Metadata onlyInternal PhotosPDF 355.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 120.9 KB
Schematics Metadata onlySchematicsPDF 171.2 KB
Schematics Metadata onlySchematicsPDF 152.5 KB
Schematics UHF Metadata onlySchematicsPDF 145.6 KB
Schematics VHF Metadata onlySchematicsPDF 146.5 KB
OpDes Justification Metadata onlyOperational DescriptionPDF 189 KB
OpDes NDA Metadata onlyOperational DescriptionPDF 152.6 KB
Operational Description Metadata onlyOperational DescriptionPDF 275.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 152.2 KB
Operational Description NDA Metadata onlyOperational DescriptionPDF 152.6 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 92.6 KB
Tune-Up Procedure Metadata onlyParts List/Tune Up InfoPDF 121.2 KB
Tune-up Procedure Metadata onlyParts List/Tune Up InfoPDF 121.2 KB

Application Information

Application ID8kpWVQRYyklR/xTMOW6ivQ==
Final Action Date2025-03-26
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0026144279
ModelSAFE4
Frequency Range150.8-156.248 MHz
Equipment ClassB9B - Part 90 Class B Industrial Booster (non-SMR)
Device DescriptionPLMR Amplifier
Responsible PartyHenry J Wojtunik, CEO, henry@safe-comwireless.com , 732-539-0905
Test FirmGeorge Yang, US Tech, gyang@ustech-lab.com , 770-740-0717
TCB Emailtei@timcoengr.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPart 90.219 Signal Booster. Power output is conducted. The intended use is generally for industrial/commercial/public safety use and will not be sold to the general public. Professional installation is required. The antenna(s) used for this transmitter are to be fixed-mounted on indoor or outdoor structures. RF exposure compliance will need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of Sec. 1.1307(b)(3). This repeater is for private use and public safety operation. Class B signal booster. Class II Permissive Change: Adds additional frequency bands as described in this filing.

Applications

Application IDDatePurpose
8kpWVQRYyklR/xTMOW6ivQ==2025-03-26Class II permissive change or modification of presently authorized equipment
TuBT4J7jHprAx2rCndI9uw==2025-02-10Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
157.188-161.575 MHz5Amp25K0F3E9
157.188-161.575 MHz55
161.775-161.96 MHz5Amp25K0F3E9
161.775-161.96 MHz55
162.04-173.4 MHz5Amp25K0F3E9
162.04-173.4 MHz55
406.1-454 MHz5Amp25K0F3E9
406.1-454 MHz55
456-462.538 MHz5Amp25K0F3E9
456-462.538 MHz55
467.74-512 MHz5Amp25K0F3E9
467.74-512 MHz55
758-775 MHz5Amp25K0F3E9
758-775 MHz55
788-805 MHz5Amp25K0F3E9
788-805 MHz55
806-849 MHz5Amp25K0F3E9
806-849 MHz55
851-869 MHz5Amp25K0F3E9
851-869 MHz55
896-901 MHz55
929-930 MHz55
935-940 MHz55

Grants

TCB Grant - Application TuBT4J7jHprAx2rCndI9uw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 02/10/2025

Application Dated: 02/10/2025
Safe-Com Wireless
21 LONGVIEW DR
HOLMDEL, NJ 07733-1641
 
Attention: Henry Wojtunik , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AKSM-SAFE4
Name of Grantee:  Safe-Com Wireless
Equipment Class: Part 90 Class B Industrial Booster (non-SMR)
Notes: PLMR Amplifier
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 150.8  -  156.2475 5.0  Amp 25K0F3E
90 157.1875  -  161.575 5.0  Amp 25K0F3E
90 161.775  -  161.96 5.0  Amp 25K0F3E
90 162.04  -  173.4 5.0  Amp 25K0F3E
90 406.1  -  454.0 5.0  Amp 25K0F3E
90 456.0  -  462.5375 5.0  Amp 25K0F3E
90 467.74  -  512.0 5.0  Amp 25K0F3E
90 758.0  -  775.0 5.0  Amp 25K0F3E
90 788.0  -  805.0 5.0  Amp 25K0F3E
90 806.0  -  849.0 5.0  Amp 25K0F3E
90 851.0  -  869.0 5.0  Amp 25K0F3E

Part 90.219 Signal Booster. Power output is conducted. The intended use is generally for industrial/commercial/public safety use and will not be sold to the general public. Professional installation is required. The antenna(s) used for this transmitter are to be fixed-mounted on indoor or outdoor structures. RF exposure compliance will need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of Sec. 1.1307(b)(3). This repeater is for private use and public safety operation.

Class B signal booster.


EAS Grant - Application TuBT4J7jHprAx2rCndI9uw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Safe-Com Wireless
21 LONGVIEW DR
HOLMDEL, NJ 07733-1641
United States
  Date of Grant: 02/10/2025

Application Dated: 02/10/2025
 
Attention: Henry Wojtunik , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AKSM-SAFE4
Name of Grantee:  Safe-Com Wireless
Equipment Class: Part 90 Class B Industrial Booster (non-SMR)
Notes: PLMR Amplifier
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 150.8  -  156.2475 5.0  Amp 25K0F3E
90 157.1875  -  161.575 5.0  Amp 25K0F3E
90 161.775  -  161.96 5.0  Amp 25K0F3E
90 162.04  -  173.4 5.0  Amp 25K0F3E
90 406.1  -  454.0 5.0  Amp 25K0F3E
90 456.0  -  462.5375 5.0  Amp 25K0F3E
90 467.74  -  512.0 5.0  Amp 25K0F3E
90 758.0  -  775.0 5.0  Amp 25K0F3E
90 788.0  -  805.0 5.0  Amp 25K0F3E
90 806.0  -  849.0 5.0  Amp 25K0F3E
90 851.0  -  869.0 5.0  Amp 25K0F3E

Part 90.219 Signal Booster. Power output is conducted. The intended use is generally for industrial/commercial/public safety use and will not be sold to the general public. Professional installation is required. The antenna(s) used for this transmitter are to be fixed-mounted on indoor or outdoor structures. RF exposure compliance will need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of Sec. 1.1307(b)(3). This repeater is for private use and public safety operation.

Class B signal booster.



TCB Grant - Application 8kpWVQRYyklR/xTMOW6ivQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 03/26/2025

Application Dated: 03/26/2025
Safe-Com Wireless
21 LONGVIEW DR
HOLMDEL, NJ 07733-1641
 
Attention: Henry Wojtunik , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AKSM-SAFE4
Name of Grantee:  Safe-Com Wireless
Equipment Class: Part 90 Class B Industrial Booster (non-SMR)
Notes: PLMR Amplifier
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 150.8  -  156.2475 5.0   25K0F3E
90 157.1875  -  161.575 5.0   25K0F3E
90 161.775  -  161.96 5.0   25K0F3E
90 162.04  -  173.4 5.0   25K0F3E
90 406.1  -  454.0 5.0   25K0F3E
90 456.0  -  462.5375 5.0   25K0F3E
90 467.74  -  512.0 5.0   25K0F3E
90 758.0  -  775.0 5.0   25K0F3E
90 788.0  -  805.0 5.0   25K0F3E
90 806.0  -  849.0 5.0   25K0F3E
90 851.0  -  869.0 5.0   25K0F3E
90 896.0  -  901.0 5.0   25K03E
90 929.0  -  930.0 5.0   25K03E
90 935.0  -  940.0 5.0   25K03E

Part 90.219 Signal Booster. Power output is conducted. The intended use is generally for industrial/commercial/public safety use and will not be sold to the general public. Professional installation is required. The antenna(s) used for this transmitter are to be fixed-mounted on indoor or outdoor structures. RF exposure compliance will need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of Sec. 1.1307(b)(3). This repeater is for private use and public safety operation. Class B signal booster. Class II Permissive Change: Adds additional frequency bands as described in this filing.