TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.

Guizhou CVIM Technology Co., Ltd. Smart Projector

FCC ID Filing: 2AKWS-TXSERIES
Purchase on Amazon: Smart Projector

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 2 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 3 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 4 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 5 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 6 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 7 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 8 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 9 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 10 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 11 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 12 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 13 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 14 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 15 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 16 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 17 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 18 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 19 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 20 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 21 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 22 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 23 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 24 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 25 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 26 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 27 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 28 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 29 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 30 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 31 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 32 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 33 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 34 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 35 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 36 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 37 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 38 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 39 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 40 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 41 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 42 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 43 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 44 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 45 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 46 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 47 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 48 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 49 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 50 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 51 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 52 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 53 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 54 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 55 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 56 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 57 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 58 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 59 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 60 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 61 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 62 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Page 63 of TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.

Report No.: BL-SZ1760349-601
Revision History
Version
Rev. 01
Issue Date
Aug. 16, 2017
Revisions Content
Initial Issue
TABLE OF CONTENTS
ADMINISTRATIVE DATA (GENERAL INFORMATION) .......................................................................... 6
1.1
Identification of the Testing Laboratory ....................................................................................... 6
1.2
Identification of the Responsible Testing Location ...................................................................... 6
1.3
Laboratory Condition ................................................................................................................... 6
1.4
Announce .................................................................................................................................... 6
PRODUCT INFORMATION ...................................................................................................................... 7
2.1
Applicant Information................................................................................................................... 7
2.2
Manufacturer Information ............................................................................................................ 7
2.3
Factory Information ..................................................................................................................... 7
2.4
General Description for Equipment under Test (EUT) ................................................................ 7
2.5
Ancillary Equipment..................................................................................................................... 8
2.6
Technical Information .................................................................................................................. 8
2.7
Additional Instructions ............................................................................................................... 10
SUMMARY OF TEST RESULTS ............................................................................................................ 11
3.1
Test Standards .......................................................................................................................... 11
3.2
Verdict ....................................................................................................................................... 12
GENERAL TEST CONFIGURATIONS ................................................................................................... 13
4.1
Test Environments .................................................................................................................... 13
4.2
Test Equipment List................................................................................................................... 13
4.3
Measurement Uncertainty ......................................................................................................... 15
4.4
Description of Test Setup .......................................................................................................... 15
4.4.1
For Antenna Port Test ............................................................................................................... 15
4.4.2
For AC Power Supply Port Test ................................................................................................ 16
4.4.3
For Radiated Test (Below 30 MHz) ........................................................................................... 16
Report No.: BL-SZ1760349-601
4.4.4
For Radiated Test (30 MHz-1 GHz) .......................................................................................... 17
4.4.5
For Radiated Test (Above 1 GHz) ............................................................................................. 17
4.5
Measurement Results Explanation Example ............................................................................. 18
4.5.1
For conducted test items: .......................................................................................................... 18
4.5.2
For radiated band edges and spurious emission test:............................................................... 18
TEST ITEMS........................................................................................................................................... 19
5.1
Antenna Requirements.............................................................................................................. 19
5.1.1
Standard Applicable .................................................................................................................. 19
5.1.2
Antenna Anti-Replacement Construction .................................................................................. 19
5.1.3
Antenna Gain ............................................................................................................................ 20
5.2
Number of Hopping Frequencies .............................................................................................. 21
5.2.1
Limit ........................................................................................................................................... 21
5.2.2
Test Setup ................................................................................................................................. 21
5.2.3
Test Procedure .......................................................................................................................... 21
5.2.4
Test Result ................................................................................................................................ 21
5.3
Peak Output Power and E.I.R.P ................................................................................................ 22
5.3.1
Test Limit ................................................................................................................................... 22
5.3.2
Test Setup ................................................................................................................................. 22
5.3.3
Test Procedure .......................................................................................................................... 22
5.3.4
Test Result ................................................................................................................................ 22
5.4
Occupied Bandwidth ................................................................................................................. 23
5.4.1
Limit ........................................................................................................................................... 23
5.4.2
Test Setup ................................................................................................................................. 23
5.4.3
Test Procedure .......................................................................................................................... 23
5.4.4
Test Result ................................................................................................................................ 23
5.5
Carrier Frequency Separation ................................................................................................... 24
5.5.1
Limit ........................................................................................................................................... 24
5.5.2
Test Setup ................................................................................................................................. 24
5.5.3
Test Procedure .......................................................................................................................... 24
5.5.4
Test Result ................................................................................................................................ 24
Report No.: BL-SZ1760349-601
5.6
Time of Occupancy (Dwell time) ............................................................................................... 25
5.6.1
Limit ........................................................................................................................................... 25
5.6.2
Test Setup ................................................................................................................................. 25
5.6.3
Test Procedure .......................................................................................................................... 25
5.6.4
Test Result ................................................................................................................................ 25
5.7
Conducted Spurious Emission & Authorized-band band-edge ................................................. 26
5.7.1
Limit ........................................................................................................................................... 26
5.7.2
Test Setup ................................................................................................................................. 26
5.7.3
Test Procedure .......................................................................................................................... 26
5.7.4
Test Result ................................................................................................................................ 26
5.8
Conducted Emission ................................................................................................................. 27
5.8.1
Limit ........................................................................................................................................... 27
5.8.2
Test Setup ................................................................................................................................. 27
5.8.3
Test Procedure .......................................................................................................................... 27
5.8.4
Test Result ................................................................................................................................ 27
5.9
Radiated Spurious Emission ..................................................................................................... 28
5.9.1
Limit ........................................................................................................................................... 28
5.9.2
Test Setup ................................................................................................................................. 28
5.9.3
Test Procedure .......................................................................................................................... 28
5.9.4
Test Result ................................................................................................................................ 29
5.10
Band Edge (Restricted-band band-edge).................................................................................. 30
5.10.1
Limit .................................................................................................................................... 30
5.10.2
Test Setup .......................................................................................................................... 30
5.10.3
Test Procedure ................................................................................................................... 30
5.10.4
Test Result ......................................................................................................................... 30
ANNEX A
TEST RESULT .......................................................................................................................... 31
A.1
Number of Hopping Frequency ................................................................................................. 31
A.2
Peak Output Power and E.I.R.P ................................................................................................ 32
A.3
20 dB and 99% bandwidth ........................................................................................................ 35
A.4
Hopping Frequency Separation................................................................................................. 38
Report No.: BL-SZ1760349-601
A.5
Average Time of Occupancy .....................................................................................................39
A.6
Conducted Spurious Emissions & Authorized-band band-edge ............................................... 41
A.7
Conducted Emissions................................................................................................................ 48
A.8
Radiated Spurious Emission ..................................................................................................... 50
A.9
Band Edge (Restricted-band band-edge).................................................................................. 59
ANNEX B
TEST SETUP PHOTOS ............................................................................................................ 63
ANNEX C
EUT EXTERNAL PHOTOS ....................................................................................................... 63
ANNEX D
EUT INTERNAL PHOTOS ........................................................................................................ 63
Report No.: BL-SZ1760349-601
1 ADMINISTRATIVE DATA (GENERAL INFORMATION)
1.1 Identification of the Testing Laboratory
Company Name
Address
Phone Number
Shenzhen BALUN Technology Co., Ltd.
Block B, 1st FL, Baisha Science and Technology Park, Shahe Xi Road,
Nanshan District, Shenzhen, Guangdong Province, P. R. China
+86 755 6685 0100
1.2 Identification of the Responsible Testing Location
Test Location
Address
Accreditation
Certificate
Description
Shenzhen BALUN Technology Co., Ltd.
Block B, 1st FL, Baisha Science and Technology Park, Shahe Xi Road,
Nanshan District, Shenzhen, Guangdong Province, P. R. China
The laboratory has been listed by Industry Canada to perform electromagnetic
emission measurements. The recognition numbers of test site are 11524A-1.
The laboratory is a testing organization accredited by FCC as a accredited
testing laboratory. The designation number is CN1196.
The laboratory is a testing organization accredited by American Association
for Laboratory Accreditation (A2LA) according to ISO/IEC 17025.The
accreditation certificate is 4344.01.
The laboratory is a testing organization accredited by China National
Accreditation Service for Conformity Assessment (CNAS) according to
ISO/IEC 17025. The accreditation certificate number is L6791.
All measurement facilities used to collect the measurement data are located
at Block B, FL 1, Baisha Science and Technology Park, Shahe Xi Road,
Nanshan District, Shenzhen, Guangdong Province, P. R. China 518055
1.3 Laboratory Condition
Ambient Temperature
Ambient Relative
Humidity
20 to 25℃
Ambient Pressure
100 kPa - 102 kPa
45% - 55%
1.4 Announce
(1) The test report reference to the report template version v5.8.
(2) The test report is invalid if not marked with the signatures of the persons responsible for preparing and
approving the test report.
(3) The test report is invalid if there is any evidence and/or falsification.
(4) The results documented in this report apply only to the tested sample, under the conditions and modes of
operation as described herein.
(5) This document may not be altered or revised in any way unless done so by BALUN and all revisions are duly
noted in the revisions section.
(6) Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without
prior written approval from the laboratory.
Report No.: BL-SZ1760349-601
2 PRODUCT INFORMATION
2.1 Applicant Information
Applicant
Guizhou CVIM Technology Co., Ltd.
Address
4th Floor, 5th R&D Building, Zunyi Software Park, Xiazi Town, Xinpu
New District, Zunyi, Guizhou
2.2 Manufacturer Information
Manufacturer
Guizhou CVIM Technology Co., Ltd.
Address
4th Floor, 5th R&D Building, Zunyi Software Park, Xiazi Town, Xinpu
New District, Zunyi, Guizhou
2.3 Factory Information
Factory
Huizhou Goldenchip Electronics Co., Ltd
Address
Factory workshop, No.12, Songyang Road, Zhongkai High-tech Zone,
Huizhou City, Guangdong
2.4 General Description for Equipment under Test (EUT)
EUT Name
Smart Projector
Model Name Under Test
T8e
Series Model Name
T8e, X6, X8, X9, T6, T8, T9, T9e, Pro X15
Hardware Version
Above basic model name and additional model name are totally the
same configuration including circuit, PCB layout, electrical part and
outlook. Above basic model name and additional model name is just
name different.
TBD
Software Version
TBD
Dimensions (Approx.)
153x120x31mm
Weight (Approx.)
500g
Bluetooth 3.0 + EDR, Bluetooth 4.0 Low Energy (BLE),
WIFI 802.11a,802.11b, 802.11g and 802.11n (HT20/40)
Description of Model
name differentiation
Network and Wireless
connectivity
Report No.: BL-SZ1760349-601
2.5 Ancillary Equipment
Battery
Ancillary Equipment 1
Brand Name
Goldenchip Electronics
Model No.
783194-3S1P
Serial No.
N/A
Capacitance
2600 mAh
Rated Voltage
11.1 V
Limit Charge Voltage
12.6 V
Adapter
Ancillary Equipment 2
Ancillary Equipment 3
Brand Name
Huntkey
Model No.
HKA03619021-8C
Serial No.
N/A
Rated Input
100-240 V , 1.0 A, 50/60 Hz
Rated Output
19 V , 2.1 A
Remote Control
2.6 Technical Information
The requirement for the following technical information of the EUT was tested in this report:
Modulation Technology
Modulation Type
Product Type
Transfer Rate
Frequency Range
Number of channel
Tested Channel
Antenna Type
Antenna Gain
Antenna System(MIMO
Smart Antenna)
FHSS
GFSK, ∏/4-DQPSK, 8-DPSK
Mobile
DH5: 1 Mbps
2DH5: 2 Mbps
3DH5: 3 Mbps
The frequency range used is 2400 MHz to 2483.5 MHz.
79 (at intervals of 1 MHz)
0 (2402 MHz), 39 (2441 MHz), 78 (2480 MHz)
PIFA Antenna
0 dBi (All involve the antenna gain test item, has been included in the
final results)
N/A
Report No.: BL-SZ1760349-601
All channel was listed on the following table:
Channel
number
10
11
12
13
14
15
16
17
18
19
20
Freq.
(MHz)
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
Channel
number
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
Freq.
(MHz)
2423
Channel
number
42
2424
2425
2426
2427
2428
2429
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
Freq.
(MHz)
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
Channel
number
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
Freq.
(MHz)
2465
2466
2467
2468
2469
2470
2471
2472
2473
2474
2475
2476
2477
2478
2479
2480
Report No.: BL-SZ1760349-601
2.7 Additional Instructions
EUT Software Settings:
Bluetooth test mode loop back enabled.
EUT is controlled over CBT / CMU.
Mode
Power level setup in software
Test Software Version
Support Units
(Software installation
media)
Mode
MediaTek BT Tool
Description
Manufacturer
Model
Notebook
Dell
X220
Channel
DH5
2DH5
3DH5
Frequency (MHz)
CH0
2402
CH39
2441
CH78
2480
CH0
2402
CH39
2441
CH78
2480
CH0
2402
CH39
2441
CH78
2480
Run Software:
10
Soft Set
TX LEVEL is built-in set
parameters and cannot be
changed and selected.
Report No.: BL-SZ1760349-601
3 SUMMARY OF TEST RESULTS
3.1 Test Standards
No.
Identity
47 CFR Part 15, Subpart
(10-1-15 Edition)
FCC PUBLIC NOTICE
DA 00-705
(Mar. 30, 2000)
ANSI C63.10-2013
Document Title
Miscellaneous Wireless Communications Services
Filling and Measurement Guidelines for Frequency Hopping
Spread Spectrum Systems
American National Standard for Testing Unlicensed Wireless
Devices
11
Report No.: BL-SZ1760349-601
3.2 Verdict
No.
Description
FCC Part
No.
Channel
Test Result
Verdict
Remark
15.203
N/A
--
Pass
Note 1
Antenna Requirement
Number of Hopping
Frequencies
15.247(a)
Hopping Mode
ANNEX A.1
Pass
Note 2
Peak Output Power
and E.I.R.P
15.247(b)
Low/Middle/High
ANNEX A.2
Pass
--
Occupied Bandwidth
15.247(a)
Low/Middle/High
ANNEX A.3
Pass
Note 2
Carrier Frequency
Separation
15.247(a)
Hopping Mode
ANNEX A.4
Pass
Note 2
Time of Occupancy
(Dwell time)
15.247(a)
Hopping Mode
ANNEX A.5
Pass
Note 2
Conducted Spurious
Emission &
Authorized-band
band-edge
15.247(d)
Low/Middle/High
ANNEX A.6
Pass
Note 2
Conducted Emission
15.207
Low/Middle/High
ANNEX A.7
Pass
Note 2
Radiated Spurious
Emission
15.209
15.247(d)
Hopping Mode,
Low/Middle/High
ANNEX A.8
Pass
Note 2
10
Band
Edge(Restricted-band
band-edge)
15.209
15.247(d)
Hopping Mode,
Low/Middle/High
ANNEX A.9
Pass
Note 2
11
Receiver Spurious
Emissions
--
--
--
N/A
Note 3
Note 1: Please refer to section 5.1
Note 2: Because of the modulation of ∏/4-DQPSK same as 8-DPSK, and the test results are
basically the same with them, so we chose 8-DPSK as a typical representative to appear on the
report. Another we will show all the modes on the RF output power test item
Note 3: Only radio communication receivers operating in stand-alone mode within the band 30960 MHz, as well as scanner receivers, are subject to Industry Canada requirements, so this test
is not applicable.
12
Report No.: BL-SZ1760349-601
4 GENERAL TEST CONFIGURATIONS
4.1 Test Environments
During the measurement, the normal environmental conditions were within the listed ranges:
Relative Humidity
Atmospheric Pressure
45% - 55%
100 kPa - 102 kPa
Temperature
NT (Normal Temperature)
+22℃ to +25℃
Working Voltage of the EUT
NV (Normal Voltage)
19 V
4.2 Test Equipment List
Description
Manufacturer
Model
Serial No.
Cal. Date
Cal. Due
Spectrum Analyzer
ROHDE&SCHWARZ
FSV-30
103118
2017.06.22
2018.06.21
Switch Unit with
OSP-B157
ROHDE&SCHWARZ
OSP120
101270
2017.06.22
2018.06.21
EMI Receiver
KEYSIGHT
N9038A
MY53220118
2016.09.09
2017.09.08
EMI Receiver
ROHDE&SCHWARZ
ESRP
101036
2017.06.22
2018.06.21
LISN
SCHWARZBECK
NSLK 8127
8127-687
2017.06.22
2018.06.21
Bluetooth Tester
ROHDE&SCHWARZ
CBT
101005
2017.06.22
2018.06.21
Power Splitter
KMW
DCPD-LDC
1305003215
--
--
Power Sensor
ROHDE&SCHWARZ
NRP-Z21
103971
2017.06.22
2018.06.21
Attenuator (20 dB)
KMW
ZA-S1-201
110617091
--
--
Attenuator (6 dB)
KMW
ZA-S1-61
1305003189
--
--
DC Power Supply
ROHDE&SCHWARZ
HMP2020
018141664
2017.06.22
2018.06.21
Temperature
Chamber
ANGELANTIONI
SCIENCE
NTH64-40A
1310
2017.06.22
2018.06.21
Test AntennaLoop(9 kHz-30 MHz)
SCHWARZBECK
FMZB 1519
1519-037
2017.06.22
2018.06.21
Test AntennaBi-Log(30 MHz-3
GHz)
SCHWARZBECK
VULB 9163
9163-624
2017.06.22
2018.06.21
Test AntennaHorn(1-18 GHz)
SCHWARZBECK
BBHA 9120D
9120D-1148
2017.06.22
2018.06.21
Test AntennaHorn(15-26.5 GHz)
SCHWARZBECK
BBHA 9170
9170-305
2017.06.22
2018.06.21
Anechoic Chamber
RAINFORD
9m*6m*6m
N/A
2017.02.24
2019.02.23
Anechoic Chamber
EMC Electronic Co.,
Ltd
20.10*11.60*7.
35m
N/A
2016.08.09
2018.08.08
Shielded Enclosure
ChangNing
CN-130701
130703
--
--
Signal Generator
ROHDE&SCHWARZ
SMB100A
177746
2017.06.22
2018.06.21
Power Amplifier
OPHIR RF
5225F
1037
2017.02.17
2018.02.16
Power Amplifier
OPHIR RF
5273F
1016
2017.02.17
2018.02.16
13
Report No.: BL-SZ1760349-601
Description
Manufacturer
Model
Serial No.
Cal. Date
Cal. Due
Directional Coupler
Werlantone
C5982-10
109275
N/A
N/A
Directional Coupler
Werlantone
CHP-273E
S00801z-01
N/A
N/A
Feld Strength Meter
Narda
EP601
511WX5112
2017.02.23
2018.02.22
Mouth Simulator
B&K
4227
2423931
2016.11.15
2017.11.14
Sound Calibrator
B&K
4231
2430337
2016.11.09
2017.11.08
Sound Level Meter
B&K
NL-20
00844023
2016.11.11
2017.11.10
Ear Simulator
B&K
4185
2409449
2016.11.15
2017.11.14
Ear Simulator
B&K
4195
2418189
2016.11.15
2017.11.14
Audio analyzer
B&K
UPL 16
100129
2016.11.08
2017.11.07
14
Report No.: BL-SZ1760349-601
4.3 Measurement Uncertainty
The following measurement uncertainty levels have been estimated for tests performed on the EUT
as specified in CISPR 16-4-2.
This uncertainty represents an expanded uncertainty expressed at approximately the 95%
confidence level using a coverage factor of k=2.
Measurement
Occupied Channel Bandwidth
Value
±4%
RF output power, conducted
±1.4 dB
Power Spectral Density, conducted
±2.5 dB
Unwanted Emissions, conducted
±2.8 dB
All emissions, radiated
±5.4 dB
Temperature
±1°C
Humidity
±4%
4.4 Description of Test Setup
4.4.1
For Antenna Port Test
Conducted value (dBm) = Measurement value (dBm) + cable loss (dB)
For example: the measurement value is 10 dBm and the cable 0.5dBm used, then the final result of EUT:
Conducted value (dBm) = 10 dBm + 0.5 dB = 10.5 dBm
(Diagram 1)
15
Report No.: BL-SZ1760349-601
4.4.2
For AC Power Supply Port Test
(Diagram 2)
4.4.3
For Radiated Test (Below 30 MHz)
(Diagram 3)
16
Report No.: BL-SZ1760349-601
4.4.4
For Radiated Test (30 MHz-1 GHz)
(Diagram 4)
4.4.5
For Radiated Test (Above 1 GHz)
(Diagram 5)
17
Report No.: BL-SZ1760349-601
4.5 Measurement Results Explanation Example
4.5.1
For conducted test items:
The offset level is set in the spectrum analyzer to compensate the RF cable loss and attenuator between EUT
conducted output port and spectrum analyzer. With the offset compensation, the spectrum analyzer reading level
is exactly the EUT RF output level.
The spectrum analyzer offset is derived from RF cable loss and attenuator factor.
Offset = RF cable loss + attenuator factor.
4.5.2
For radiated band edges and spurious emission test:
Per part 15.35(c), the EUT Bluetooth average emission level could be determined by the peak emission
level applying duty cycle correction factor, to represent averaging over the whole pulse train.
The average level is derived from the peak level corrected with “Duty cycle correction factor”.
Average Emission Level (dBuV/m) = Peak Emission Level (dBuV/m) + Duty cycle correction factor (dB)
Duty cycle correction factor (dB) = 20 * log (Duty cycle).
Duty cycle = on time / 100 milliseconds
On time = dwell time * hopping number in 100 ms
For example: bluetooth with dwell time 2.9 ms and 3 hops in 100 ms, then
Duty cycle correction factor (dB) = 20 * log ((2.9 * 3) / 100) = -21.21 dB
Following shows an average computation example with duty cycle correction factor = -21.21 dB, and the peak
emission level is 45.61 dBuV/m.
Example:
Average Emission Level (dBuV/m) = Peak Emission Level (dBuV/m) + duty cycle correction factor (dB)
= 45.61 + (-21.21) = 24.4 (dBuV/m)
18
Report No.: BL-SZ1760349-601
5 TEST ITEMS
5.1 Antenna Requirements
5.1.1
Standard Applicable
FCC §15.203 & 15.247(b); RSS-247, 5.4 (6)
An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible
party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a
unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section.
The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a
standard antenna jack or electrical connector is prohibited. This requirement does not apply to carrier current
devices or to devices operated under the provisions of § 15.211, § 15.213, § 15.217, § 15.219, or § 15.221. Further,
this requirement does not apply to intentional radiators that must be professionally installed, such as perimeter
protection systems and some field disturbance sensors, or to other intentional radiators which, in accordance with
§ 15.31(d), must be measured at the installation site. However, the installer shall be responsible for ensuring that
the proper antenna is employed so that the limits in this part are not exceeded.
If directional gain of transmitting antennas is greater than 6 dBi, the power shall be reduced by the same level in
dB comparing to gain minus 6 dBi. For the fixed point-to-point operation, the power shall be reduced by one dB for
every 3 dB that the directional gain of the antenna exceeds 6 dBi. The use of a permanently attached antenna or
of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with
the FCC rule.
5.1.2
Antenna Anti-Replacement Construction
The Antenna Anti-Replacement as following method:
Protected Method
Description
The antenna is An embedded-in
The antenna is welded on the mainboard, can’t be replaced by the
consumer
Reference Documents
Item
Photo
19
Report No.: BL-SZ1760349-601
5.1.3
Antenna Gain
The antenna peak gain of EUT is less than 6 dBi. Therefore, it is not necessary to reduce maximum peak output
power limit.
20
Report No.: BL-SZ1760349-601
5.2 Number of Hopping Frequencies
5.2.1
Limit
FCC §15.247(a) (1) (iii); RSS-247, 5.1 (4)
Frequency hopping systems operating in the 2400 MHz to 2483.5 MHz bands shall use at least 15 hopping
frequencies.
5.2.2
Test Setup
See section 4.4.1 for test setup description for the antenna port. The photo of test setup please refer to ANNEX B.
5.2.3
Test Procedure
The EUT must have its hopping function enabled. Use the following spectrum analyzer settings:
Span = the frequency band of operation
RBW ≥ 1% of the span
VBW ≥ RBW
Sweep = auto
Detector function = peak
Trace = max hold
Allow the trace to stabilize
5.2.4
Test Result
Please refer to ANNEX A.1.
21
Report No.: BL-SZ1760349-601
5.3 Peak Output Power and E.I.R.P
5.3.1
Test Limit
FCC § 15.247(b)
For frequency hopping systems operating in the 2400-2483.5 MHz band employing at least 75 non-overlapping
hopping channels. For all other frequency hopping systems in the 2400-2483.5 MHz band: 0.125 watts.
RSS-247, 5.4 (2)
For FHSs operating in the band 2400-2483.5 MHz, the maximum peak conducted output power shall not exceed
1.0 W and the e.i.r.p. shall not exceed 4 W if the hopset uses 75 or more hopping channels; the maximum peak
conducted output power shall not exceed 0.125 W and the e.i.r.p. shall not exceed 0.5 W if the hopset uses less
than 75 hopping channels (see Section 5.4(5) for exceptions).
5.3.2
Test Setup
See section 4.4.1 for test setup description for the antenna port. The photo of test setup please refer to ANNEX B.
5.3.3
Test Procedure
The Module operates at hopping-off test mode. The lowest, middle and highest channels are selected to perform
testing to verify the conducted RF output peak power of the Module.
Use the following spectrum analyzer settings:
Span = approximately 5 times the 20 dB bandwidth, centered on a hopping channel
RBW > the 20 dB bandwidth of the emission being measured
VBW ≥ RBW
Sweep = auto
Detector function = peak
Trace = max hold
Allow the trace to stabilize.
5.3.4
Test Result
Please refer to ANNEX A.2.
22
Report No.: BL-SZ1760349-601
5.4 Occupied Bandwidth
5.4.1
Limit
FCC §15.247(a); RSS-247, 5.1 (1)
Measurement of the 20dB bandwidth of the modulated signal.
5.4.2
Test Setup
See section 4.4.1 for test setup description for the antenna port. The photo of test setup please refer to ANNEX B.
5.4.3
Test Procedure
Use the following spectrum analyzer settings:
Span = approximately 2 to 3 times the 20 dB bandwidth, centered on a hopping channel
RBW = in the range of 1% to 5% of the OBW
VBW ≥ RBW
Sweep = auto
Detector function = peak
Trace = max hold
The EUT should be transmitting at its maximum data rate, Allow the trace to stabilize.
5.4.4
Test Result
Please refer to ANNEX A.3.
23
Report No.: BL-SZ1760349-601
5.5 Carrier Frequency Separation
5.5.1
Limit
FCC §15.247(a); RSS-247, 5.1 (2)
Frequency hopping systems shall have hopping channel carrier frequencies separated by a minimum of 25 kHz or
the 20 dB bandwidth of the hopping channel, whichever is greater. Alternatively, Frequency hopping systems shall
have hopping channel carrier frequencies separated by a minimum of 25 kHz or two-thirds of the 20 dB bandwidth
of the hopping channel, whichever is greater, provided the systems operate with an output power no greater than
125 mW.
5.5.2
Test Setup
See section 4.4.1 for test setup description for the antenna port. The photo of test setup please refer to ANNEX B.
5.5.3
Test Procedure
The EUT must have its hopping function enabled. Use the following spectrum analyzer settings:
Span = wide enough to capture the peaks of two adjacent channels
Resolution (or IF) Bandwidth (RBW) ≥ 1% of the span
Video (or Average) Bandwidth (VBW) ≥ RBW
Sweep = auto
Detector function = peak
Trace = max hold
Allow the trace to stabilize. Use the marker-delta function to determine the separation between the peaks of the
adjacent channels.
5.5.4
Test Result
Please refer to ANNEX A.4.
24
Report No.: BL-SZ1760349-601
5.6 Time of Occupancy (Dwell time)
5.6.1
Limit
FCC §15.247(a); RSS-247, 5.1 (4)
Frequency hopping systems in the 2400 MHz - 2483.5 MHz band shall use at least 15 non-overlapping channels.
The average time of occupancy on any channel shall not be greater than 0.4 seconds within a period of 0.4 seconds
multiplied by the number of hopping channels employed. Frequency hopping systems may avoid or suppress
transmissions on a particular hopping frequency provided that a minimum of 15 channels are used.
5.6.2
Test Setup
See section 4.4.1 for test setup description for the antenna port. The photo of test setup please refer to ANNEX B.
5.6.3
Test Procedure
The average time of occupancy on any channel within the Period can be calculated with formulas:
For DH1 package type
{Total of Dwell} = {Pulse Time} * (1600 / 2) / {Number of Hopping Frequency} * {Period}
{Period} =
0.4 s * {Number of Hopping Frequency}
For DH3 package type
{Total of Dwell} = {Pulse Time} * (1600 / 4) / {Number of Hopping Frequency} * {Period}
{Period} =
0.4 s * {Number of Hopping Frequency}
For DH5 package type
{Total of Dwell} = {Pulse Time} * (1600 / 6) / {Number of Hopping Frequency} * {Period}
{Period} = 0.4 s * {Number of Hopping Frequency}
The lowest, middle and highest channels are selected to perform testing to record the dwell time of each occupation
measured in this channel, which is called Pulse Time here.
5.6.4
Test Result
Please refer to ANNEX A.5
25
Report No.: BL-SZ1760349-601
5.7 Conducted Spurious Emission & Authorized-band band-edge
5.7.1
Limit
FCC §15.247(d); RSS-247, 5.5
In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated
intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at
least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired
power, based on either an RF conducted or a radiated measurement.
5.7.2
Test Setup
See section 4.4.1 for test setup description for the antenna port. The photo of test setup please refer to ANNEX B.
5.7.3
Test Procedure
Use the following spectrum analyzer settings:
Span = wide enough to capture the peak level of the in-band emission and all spurious emissions (e.g., harmonics)
from the lowest frequency generated in the EUT up through the 10th harmonic. Typically, several plots are required
to cover this entire span.
RBW = 100 kHz
VBW ≥ RBW
Sweep = auto
Detector function = peak
Trace = max hold
Allow the trace to stabilize
5.7.4
Test Result
Please refer to ANNEX A.6.
26
Report No.: BL-SZ1760349-601
5.8 Conducted Emission
5.8.1
Limit
FCC §15.207; RSS-GEN, 8.8
For an intentional radiator that is designed to be connected to the public utility (AC) power line, the radio frequency
voltage that is conducted back onto the AC power line on any frequency within the band 150 kHz to 30 MHz shall
not exceed the limits in the following table, as measured using a 50µH/50Ω line impedance stabilization network
(LISN).
5.8.2
Conducted Limit (dBµV)
Frequency range
(MHz)
Quai-peak
Average
0.15 - 0.50
66 to 56
56 to 46
0.50 - 5
56
46
0.50 - 30
60
50
Test Setup
See section 4.4.2 for test setup description for the AC power supply port. The photo of test setup please refer to
ANNEX B.
5.8.3
Test Procedure
The maximum conducted interference is searched using Peak (PK), if the emission levels more than the AV and
QP limits, and that have narrow margins from the AV and QP limits will be re-measured with AV and QP detectors.
Tests for both L phase and N phase lines of the power mains connected to the EUT are performed. Refer to
recorded points and plots below.
Devices subject to Part 15 must be tested for all available U.S. voltages and frequencies (such as a nominal 120
VAC, 50/60 Hz and 240 VAC, 50/60 Hz) for which the device is capable of operation. A device rated for 50/60 Hz
operation need not be tested at both frequencies provided the radiated and line conducted emissions are the same
at both frequencies.
5.8.4
Test Result
Please refer to ANNEX A.7.
27
Report No.: BL-SZ1760349-601
5.9 Radiated Spurious Emission
5.9.1
Limit
FCC §15.209&15.247(d); RSS-247, 5.5
Radiated emission outside the frequency band attenuation below the general limits specified in FCC section
15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in FCC
section 15.205(a), must also comply with the radiated emission limits specified in FCC section 15.209(a).
According to FCC section 15.209 (a), except as provided elsewhere in this subpart, the emissions from an
intentional radiator shall not exceed the field strength levels specified in the following table:
Frequency (MHz)
Field Strength (µV/m)
Measurement Distance (m)
0.009 - 0.490
2400/F(kHz)
300
0.490 - 1.705
24000/F(kHz)
30
1.705 - 30.0
30
30
30 - 88
100
88 - 216
150
216 - 960
200
Above 960
500
Note:
1.
Field Strength (dBµV/m) = 20*log[Field Strength (µV/m)].
2.
In the emission tables above, the tighter limit applies at the band edges.
3.
For Above 1000 MHz, the emission limit in this paragraph is based on measurement instrumentation
employing an average detector, measurement using instrumentation with a peak detector function,
corresponding to 20dB above the maximum permitted average limit.
4.
For above 1000 MHz, limit field strength of harmonics: 54dBuV/[email protected] (AV) and 74dBuV/[email protected] (PK).
5.9.2
Test Setup
See section 4.4.3 to 4.4.5 for test setup description for the antenna port. The photo of test setup please refer to
ANNEX B.
5.9.3
Test Procedure
The measurement frequency range is from 9 kHz to the 10th harmonic of the fundamental frequency. The Turn
Table is actuated to turn from 0° to 360°, and both horizontal and vertical polarizations of the Test Antenna are
used to find the maximum radiated power. Mid channels on all channel bandwidth verified. Only the worst RB
size/offset presented.
The power of the EUT transmitting frequency should be ignored.
All Spurious Emission tests were performed in X, Y, Z axis direction. And only the worst axis test condition was
recorded in this test report.
Use the following spectrum analyzer settings:
28
Report No.: BL-SZ1760349-601
Span = wide enough to fully capture the emission being measured
RBW = 1 MHz for f ≥ 1 GHz, 100 kHz for f < 1 GHz
VBW ≥ RBW
Sweep = auto
Detector function = peak
Trace = max hold
For measurement below 1GHz, If the emission level of the EUT measured by the peak detector is 3 dB lower
than the applicable limit, the peak emission level will be reported, Otherwise, the emission measurement will be
repeated using the quasi-peak detector and reported.
5.9.4
Test Result
Please refer to ANNEX A.8.
29
Report No.: BL-SZ1760349-601
5.10 Band Edge (Restricted-band band-edge)
5.10.1 Limit
FCC §15.209&15.247(d)
Radiated emission outside the frequency band attenuation below the general limits specified in FCC section
15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in FCC
section 15.205(a), must also comply with the radiated emission limits specified in FCC section 15.209(a).
5.10.2 Test Setup
See section 4.4.3 to 4.4.5 for test setup description for the antenna port. The photo of test setup please refer to
ANNEX B.
5.10.3 Test Procedure
The measurement frequency range is from 9 kHz to the 10th harmonic of the fundamental frequency. The Turn
Table is actuated to turn from 0° to 360°, and both horizontal and vertical polarizations of the Test Antenna are
used to find the maximum radiated power. Mid channels on all channel bandwidth verified. Only the worst RB
size/offset presented.
The power of the EUT transmitting frequency should be ignored.
All Spurious Emission tests were performed in X, Y, Z axis direction. And only the worst axis test condition was
recorded in this test report.
Use the following spectrum analyzer settings:
Span = wide enough to fully capture the emission being measured
RBW = 1 MHz for f ≥ 1 GHz, 100 kHz for f < 1 GHz
VBW ≥ RBW
Sweep = auto
Detector function = peak
Trace = max hold
For measurement below 1GHz, If the emission level of the EUT measured by the peak detector is 3 dB lower than
the applicable limit, the peak emission level will be reported, Otherwise, the emission measurement will be repeated
using the quasi-peak detector and reported.
5.10.4 Test Result
Please refer to ANNEX A.9.
30
Report No.: BL-SZ1760349-601
ANNEX A TEST RESULT
A.1 Number of Hopping Frequency
Test Data
Test Mode
Frequency Block
(MHz)
Measured Channel
Numbers
Min. Limit
Verdict
GFSK
2400 - 2483.5
79
15
Pass
8-DPSK
2400 - 2483.5
79
15
Pass
Test plots
GFSK 2.4 GHz ~ 2.4415 GHz
8-DPSK 2.4 GHz ~ 2.4415 GHz
GFSK 2.4415 GHz ~ 2.4835 GHz
8-DPSK 2.4415 GHz ~ 2.4835 GHz
31
Report No.: BL-SZ1760349-601
A.2 Peak Output Power and E.I.R.P
Peak Power Test Data
Measured Output Peak Power
Channel
GFSK
dBm
mW
Low
4.38
Middle
4.88
High
5.55
2.74
3.08
3.59
Limit
dBm
Pass
30
1000
∏/4-DQPSK
Limit
8-DPSK
dBm
mW
dBm
mW
Low
3.57
3.80
Middle
4.16
High
4.80
2.28
2.61
3.02
2.40
2.74
3.17
4.38
5.01
32
Pass
Pass
Measured Output Peak Power
Channel
Verdict
mW
dBm
mW
Verdict
Pass
21
125
Pass
Pass
Report No.: BL-SZ1760349-601
Test plots
GFSK LOW CHANNEL
GFSK MIDDLE CHANNEL
GFSK HIGH CHANNEL
∏/4-DQPSK LOW CHANNEL
∏/4-DQPSK MIDDLE CHANNEL
33
Report No.: BL-SZ1760349-601
∏/4-DQPSK HIGH CHANNEL
8-DPSK LOW CHANNEL
8-DPSK MIDDLE CHANNEL
8-DPSK HIGH CHANNEL
34
Report No.: BL-SZ1760349-601
A.3 20 dB and 99% bandwidth
Test Data
GFSK
Channel
20 dB Bandwidth (MHz)
99% Bandwidth (MHz)
Low
0.995605
0.903039
Middle
1.008545
0.907381
High
1.047852
0.911722
8-DPSK
Channel
20 dB Bandwidth (MHz)
99% Bandwidth (MHz)
Low
1.300049
1.167873
Middle
1.304199
1.172214
High
1.300049
1.176556
Test plots
20 dB Bandwidth
GFSK LOW CHANNEL
GFSK MIDDLE CHANNEL
GFSK HIGH CHANNEL
35
Report No.: BL-SZ1760349-601
8-DPSK LOW CHANNEL
8-DPSK MIDDLE CHANNEL
8-DPSK HIGH CHANNEL
99% Bandwidth
GFSK LOW CHANNEL
GFSK MIDDLE CHANNEL
36
Report No.: BL-SZ1760349-601
GFSK HIGH CHANNEL
8-DPSK LOW CHANNEL
8-DPSK MIDDLE CHANNEL
8-DPSK HIGH CHANNEL
37
Report No.: BL-SZ1760349-601
A.4 Hopping Frequency Separation
Test Data
Note: The systems operate with an output power no greater than 125 mw, The data provided in the section A.2.
Test Plots
GFSK
Mode
Frequency
separation
(MHz)
Max 20 dB
Bandwidth
(MHz)
Two-thirds of the
20 dB bandwidth
(MHz)
Verdict
GFSK
0.9983
1.048
0.699
Pass
8-DPSK
1.0033
1.304
0.869
Pass
8-DPSK
38
Report No.: BL-SZ1760349-601
A.5 Average Time of Occupancy
Test Data
GFSK
DH Packet
Pulse Width
(ms)
Total of Dwell (ms)
Limit
(sec)
Verdict
DH 1
0.3614
115.652
0.4
Pass
DH 3
1.6081
257.304
0.4
Pass
DH 5
2.84267
303.228
0.4
Pass
8-DPSK
DH Packet
Pulse Width
(ms)
Total of Dwell (ms)
Limit
(sec)
Verdict
DH 1
0.3749
119.972
0.4
Pass
DH 3
1.6100
257.608
0.4
Pass
DH 5
2.8518
304.202
0.4
Pass
Test Plots
GFSK DH1
GFSK DH3
39
Report No.: BL-SZ1760349-601
GFSK DH5
8-DPSK DH1
8-DPSK DH3
8-DPSK DH5
40
Report No.: BL-SZ1760349-601
A.6 Conducted Spurious Emissions & Authorized-band band-edge
Test Data
GFSK
Channel
Measured Max. Out of
Band Emission (dBm)
Limit (dBm)
Carrier Level
Calculated
20 dBc Limit
Verdict
Low
-38.81
4.09
-15.91
Pass
Middle
-39.02
4.63
-15.37
Pass
High
-40.34
5.27
-14.73
Pass
8-DPSK
Channel
Measured Max. Out of
Band Emission (dBm)
Limit (dBm)
Carrier Level
Calculated
20 dBc Limit
Verdict
Low
-38.68
2.38
-17.62
Pass
Middle
-42.13
2.98
-17.02
Pass
High
-42.39
3.68
-16.32
Pass
Hopping Mode
Mode
Measured Max. Out of
Band Emission (dBm)
Limit (dBm)
Carrier Level
Calculated
20 dBc Limit
Verdict
GFSK
-39.65
5.00
-15.00
Pass
8-DPSK
-42.20
3.29
-16.71
Pass
41
Report No.: BL-SZ1760349-601
Test Plots
GFSK LOW CHANNEL, CARRIER LEVEL
GFSK LOW CHANNEL , BAND EDGE
GFSK LOW CHANNEL , SPURIOUS 30 MHz ~ 3
GFSK LOW CHANNEL , SPURIOUS 3 GHz ~ 25
GHz
GHz
GFSK MIDDLE CHANNEL, CARRIER LEVEL
42
Report No.: BL-SZ1760349-601
GFSK MIDDLE CHANNEL , SPURIOUS 30 MHz ~
GFSK MIDDLE CHANNEL , SPURIOUS 3 GHz ~
3 GHz
25 GHz
GFSK HIGH CHANNEL, CARRIER LEVEL
GFSK HIGH CHANNEL , BAND EDGE
GFSK HIGH CHANNEL , SPURIOUS 30 MHz ~ 3
GFSK HIGH CHANNEL , SPURIOUS 3 GHz ~ 25
GHz
GHz
43
Report No.: BL-SZ1760349-601
8-DPSK LOW CHANNEL, CARRIER LEVEL
8-DPSK LOW CHANNEL , BAND EDGE
8-DPSK LOW CHANNEL , SPURIOUS 30 MHz ~ 3
8-DPSK LOW CHANNEL , SPURIOUS 3 GHz ~ 25
GHz
GHz
8-DPSK MIDDLE CHANNEL, CARRIER LEVEL
44
Report No.: BL-SZ1760349-601
8-DPSK MIDDLE CHANNEL , SPURIOUS 30 MHz
8-DPSK MIDDLE CHANNEL , SPURIOUS 3 GHz ~
~ 3 GHz
25 GHz
8-DPSK HIGH CHANNEL, CARRIER LEVEL
8-DPSK HIGH CHANNEL , BAND EDGE
8-DPSK HIGH CHANNEL , SPURIOUS 30 MHz ~ 3
8-DPSK HIGH CHANNEL , SPURIOUS 3 GHz ~ 25
GHz
GHz
45
Report No.: BL-SZ1760349-601
GFSK HOPPING, CARRIER LEVEL
GFSK HOPPING BAND EDGE (LOW)
GFSK HOPPING BAND EDGE (HIGH)
GFSK Hopping Mode, SPURIOUS 30 MHz ~ 3
GFSK Hopping Mode, SPURIOUS 30 3GHz ~ 25
GHz
GHz
46
Report No.: BL-SZ1760349-601
8-DPSK HOPPING, CARRIER LEVEL
8-DPSK Hopping BAND EDGE (LOW)
8-DPSK Hopping BAND EDGE (HIGH)
8-DPSK Hopping Mode, SPURIOUS 30 MHz ~ 3
8-DPSK Hopping Mode, SPURIOUS 30 3GHz ~ 25
GHz
GHz
47
Report No.: BL-SZ1760349-601
A.7
Conducted Emissions
Note 1: The EUT is working in the Normal link mode.
Note 2: Devices subject to Part 15 must be tested for all available U.S. voltages and frequencies (such as a nominal
120 VAC, 60 Hz and 240 VAC, 50 Hz) for which the device is capable of operation. So, The configuration 120 VAC,
60 Hz and 240 VAC, 50 Hz were tested respectively, but only the worst configuration (120 VAC, 60 Hz ) shown
here.
Test Data and Plots
PHASE L
No.
Frequency
Results
(MHz)
(dBuV)
0.176
40.7
1**
0.176
Factor (dB)
Limit
Margin
Detector
Line
Verdict
(dBuV)
(dB)
9.84
64.7
24.00
Peak
L Line
Pass
32.6
9.84
54.7
22.10
AV
L Line
Pass
0.288
38.5
9.34
60.6
22.10
Peak
L Line
Pass
2**
0.288
28.1
9.34
50.6
22.50
AV
L Line
Pass
0.602
36.5
10.49
56.0
19.50
Peak
L Line
Pass
3**
0.602
27.5
10.49
46.0
18.50
AV
L Line
Pass
1.268
35.7
10.28
56.0
20.30
Peak
L Line
Pass
4**
1.268
26.2
10.28
46.0
19.80
AV
L Line
Pass
3.714
36.6
10.86
56.0
19.40
Peak
L Line
Pass
5**
3.714
28.2
10.86
46.0
17.80
AV
L Line
Pass
11.502
38.5
11.02
60.0
21.50
Peak
L Line
Pass
6**
11.502
27.3
11.02
50.0
22.70
AV
L Line
Pass
48
Report No.: BL-SZ1760349-601
PHASE N
No.
Frequency
Results
(MHz)
(dBuV)
0.156
39.9
1**
0.156
Factor (dB)
Limit
Margin
Detector
Line
Verdict
(dBuV)
(dB)
10.20
65.7
25.80
Peak
N Line
Pass
33.0
10.20
55.7
22.70
AV
N Line
Pass
0.480
30.1
11.23
56.3
26.20
Peak
N Line
Pass
2**
0.480
20.2
11.23
46.3
26.10
AV
N Line
Pass
1.124
33.6
10.31
56.0
22.40
Peak
N Line
Pass
3**
1.124
24.7
10.31
46.0
21.30
AV
N Line
Pass
3.040
34.8
10.73
56.0
21.20
Peak
N Line
Pass
4**
3.040
26.3
10.73
46.0
19.70
AV
N Line
Pass
7.502
37.8
10.02
60.0
22.20
Peak
N Line
Pass
5**
7.502
28.2
10.02
50.0
21.80
AV
N Line
Pass
12.478
39.4
10.97
60.0
20.60
Peak
N Line
Pass
6**
12.478
28.6
10.97
50.0
21.40
AV
N Line
Pass
49
Report No.: BL-SZ1760349-601
A.8 Radiated Spurious Emission
Duty cycle correction factor for average measurement.
Note:
1. Duty cycle = on time/100 milliseconds = 3* 2.84267 / 100 =8.53 %
2. Duty cycle correction factor = 20*log (Duty cycle) = -21.38 dB
3. DH5 has the highest duty cycle and is reported.
DH5 on time/100 ms (One Pulse) Plot on Channel 39
DH5 on time/100 ms (Count Pulses) Plot on Channel 39
50
Report No.: BL-SZ1760349-601
Test Data and Plots
Note 1: The symbol of “--” in the table which means not application.
Note 2: For the test data above 1 GHz, according the ANSI C63.10-2013, where limits are specified for both average
and peak (or quasi-peak) detector functions, if the peak (or quasi-peak) measured value complies with the average
limit, it is unnecessary to perform an average measurement.
Note 3: The EUT is working in the Normal link mode below 1 GHz.
The low frequency, which started from 9 kHz to 30 MHz, was pre-scanned and the result which was 20 dB lower
than the limit line per 15.31(o) was not reported.
30 MHz to 1 GHz, ANT V
No.
Frequency
Results
(MHz)
(dBuV/m)
33.394
25.85
37.273
Factor (dB)
Limit
Margin
(dBuV/m)
(dB)
-16.43
30.0
4.15
23.25
-15.12
30.0
48.668
16.98
-13.35
64.184
19.42
83.094
114.854
Table
Height
ANT
Verdict
(o)
(cm)
Peak
150.00
300
Vertical
Pass
6.75
Peak
34.00
100
Vertical
Pass
30.0
13.02
Peak
191.00
200
Vertical
Pass
-15.37
30.0
10.58
Peak
130.00
100
Vertical
Pass
11.52
-18.83
30.0
18.48
Peak
61.00
100
Vertical
Pass
11.23
-16.05
33.5
22.27
Peak
222.00
200
Vertical
Pass
51
Detector
Report No.: BL-SZ1760349-601
30 MHz to 1 GHz, ANT H
No.
Frequency
Results
(MHz)
(dBuV/m)
43.092
11.62
65.396
Factor (dB)
Limit
Margin
(dBuV/m)
(dB)
-13.44
30.0
18.38
11.21
-15.68
30.0
99.338
10.40
-15.30
423.237
19.23
649.918
959.755
Table
Height
ANT
Verdict
(o)
(cm)
Peak
135.00
100
Horizontal
Pass
18.79
Peak
2.00
200
Horizontal
Pass
33.5
23.10
Peak
4.00
200
Horizontal
Pass
-9.02
36.0
16.77
Peak
5.00
100
Horizontal
Pass
28.25
-4.58
36.0
7.75
Peak
282.00
300
Horizontal
Pass
27.91
-0.31
36.0
8.09
Peak
3.00
100
Horizontal
Pass
52
Detector
Report No.: BL-SZ1760349-601
Test Data and Plots (1 GHz ~ 10th Harmonic)
Note 1: The marked spikes near 2400 MHz with circle should be ignored because they are Fundamental signal.
GFSK LOW CHANNEL 1 GHz to 25 GHz, ANT V
No.
Frequency
Results
(MHz)
(dBuV/m)
1603.01
48.74
2402.09
Factor (dB)
Limit
Margin
(dBuV/m)
(dB)
-6.11
74
25.26
91.66
-2.70
74
4880.11
56.73
10.25
3*
4880.11
50.48
6628.95
Detector
Table
Height
ANT
Verdict
(o)
(cm)
Peak
172.7
150
Vertical
Pass
-17.66
Peak
151
150
Vertical
N/A
74
14.27
Peak
145.4
150
Vertical
Pass
10.25
54
3.52
AV
145.4
150
Vertical
Pass
45.32
20.18
74
28.68
Peak
206.4
150
Vertical
Pass
14081.12
44.52
9.15
74
29.48
Peak
260.1
150
Vertical
Pass
24620.63
47.42
11.18
74
26.58
Peak
66.1
150
Vertical
Pass
Limit
Margin
Detector
Table
Height
(dBuV/m)
(dB)
(o)
(cm)
GFSK LOW CHANNEL 1 GHz to 25 GHz, ANT H
No.
Frequency
Results
Factor (dB)
ANT
Verdict
(MHz)
(dBuV/m)
1595.30
52.42
-6.06
74
21.58
Peak
102.2
150
Horizontal
Pass
2401.59
101.34
-2.72
74
-27.34
Peak
43.2
150
Horizontal
N/A
4883.26
54.01
10.21
74
15.00
Peak
348.1
150
Horizontal
Pass
3*
4883.26
50.93
10.21
54
3.07
AV
348.1
150
Horizontal
Pass
7336.52
48.35
18.84
74
25.65
Peak
81.7
150
Horizontal
Pass
17897.67
46.61
9.71
74
27.39
Peak
68
150
Horizontal
Pass
21555.74
45.65
8.74
74
28.35
Peak
317.4
150
Horizontal
Pass
GFSK MIDDLE CHANNEL 1 GHz to 25 GHz, ANT V
No.
Frequency
Results
(MHz)
(dBuV/m)
1600.07
47.66
2440.42
Factor (dB)
Limit
Margin
(dBuV/m)
(dB)
-6.10
74
26.34
92.57
-2.70
74
4880.58
55.19
10.25
3*
4880.58
50.11
10571.13
Table
Height
ANT
Verdict
(o)
(cm)
Peak
150.2
150
Vertical
Pass
-18.57
Peak
301.2
150
Vertical
N/A
74
15.81
Peak
7.1
150
Vertical
Pass
10.25
54
3.89
AV
7.1
150
Vertical
Pass
46.62
18.20
74
27.38
Peak
48.6
150
Vertical
Pass
13997.92
47.01
11.17
74
26.99
Peak
143.4
150
Vertical
Pass
20607.32
45.77
10.74
74
28.23
Peak
203.4
150
Vertical
Pass
53
Detector
Report No.: BL-SZ1760349-601
GFSK MIDDLE CHANNEL 1 GHz to 25 GHz, ANT H
No.
Frequency
Results
(MHz)
(dBuV/m)
1597.98
52.58
2440.84
Factor (dB)
Limit
Margin
(dBuV/m)
(dB)
-6.04
74
21.42
99.96
-2.72
74
4881.30
52.06
10.25
6101.08
43.68
16795.34
24560.73
Detector
Table
Height
ANT
Verdict
(o)
(cm)
Peak
82.4
150
Horizontal
Pass
-25.96
Peak
340.1
150
Horizontal
N/A
74
21.94
Peak
102.1
150
Horizontal
Pass
14.19
74
30.32
Peak
290.9
150
Horizontal
Pass
43.75
9.02
74
30.25
Peak
204.2
150
Horizontal
Pass
47.28
13.40
74
26.72
Peak
219.5
150
Horizontal
Pass
GFSK HIGH CHANNEL 1 GHz to 25 GHz, ANT V
No.
Frequency
Results
(MHz)
(dBuV/m)
1601.88
47.46
2480.32
Factor (dB)
Limit
Margin
(dBuV/m)
(dB)
-6.11
74
26.54
93.26
-2.72
74
4882.51
56.15
10.25
3*
4882.51
50.27
7740.85
Detector
Table
Height
ANT
Verdict
(o)
(cm)
Peak
255
150
Vertical
Pass
-19.26
Peak
294.9
150
Vertical
N/A
74
14.85
Peak
174.1
150
Vertical
Pass
10.25
54
3.73
AV
174.1
150
Vertical
Pass
45.49
14.20
74
28.51
Peak
164
150
Vertical
Pass
17544.09
43.43
9.40
74
30.57
Peak
146.4
150
Vertical
Pass
18324.04
48.79
11.14
74
25.21
Peak
163.6
150
Vertical
Pass
Limit
Margin
Detector
(dBuV/m)
(dB)
GFSK HIGH CHANNEL 1 GHz to 25 GHz, ANT H
No.
Frequency
Results
Factor (dB)
Table
Height
ANT
Verdict
(MHz)
(dBuV/m)
(o)
(cm)
1595.76
52.99
-6.06
74
21.01
Peak
188.5
150
Horizontal
Pass
2480.49
99.58
-2.72
74
-25.58
Peak
223
150
Horizontal
N/A
4881.18
51.27
10.25
74
22.73
Peak
22.3
150
Horizontal
Pass
7314.06
43.24
14.37
74
30.76
Peak
233.9
150
Horizontal
Pass
14049.92
43.29
9.77
74
30.71
Peak
345.2
150
Horizontal
Pass
22424.29
48.30
11.19
74
25.70
Peak
11.6
150
Horizontal
Pass
54
Report No.: BL-SZ1760349-601
8-DPSK LOW CHANNEL 1 GHz to 25 GHz, ANT V
No.
Frequency
Results
(MHz)
(dBuV/m)
1603.65
48.04
2402.02
Factor (dB)
Limit
Margin
(dBuV/m)
(dB)
-6.11
74
25.96
92.67
-2.71
74
4885.05
56.15
10.25
3*
4885.05
45.00
8246.26
Detector
Table
Height
ANT
Verdict
(o)
(cm)
Peak
114.2
150
Vertical
Pass
-18.67
Peak
354.3
150
Vertical
N/A
74
14.85
Peak
265.3
150
Vertical
Pass
10.25
54
9.00
AV
265.3
150
Vertical
Pass
43.11
15.07
74
30.89
Peak
149.2
150
Vertical
Pass
13353.16
43.41
10.96
74
30.60
Peak
245.3
150
Vertical
Pass
18365.64
46.58
10.66
74
27.42
Peak
83.8
150
Vertical
Pass
Limit
Margin
Detector
Table
Height
(dBuV/m)
(dB)
(o)
(cm)
8-DPSK LOW CHANNEL 1 GHz to 25 GHz, ANT H
No.
Frequency
Results
Factor (dB)
ANT
Verdict
(MHz)
(dBuV/m)
1596.43
52.52
-6.06
74
21.48
Peak
353.9
150
Horizontal
Pass
2401.53
101.20
-2.72
74
-27.20
Peak
75.4
150
Horizontal
N/A
4884.59
52.25
10.25
74
21.75
Peak
118.2
150
Horizontal
Pass
9088.60
50.49
18.91
74
23.51
Peak
87.2
150
Horizontal
Pass
13145.18
45.71
9.73
74
28.30
Peak
175.9
150
Horizontal
Pass
18729.62
46.46
12.45
74
27.54
Peak
71
150
Horizontal
Pass
8-DPSK MIDDLE CHANNEL 1 GHz to 25 GHz, ANT V
No.
Frequency
Results
(MHz)
(dBuV/m)
1599.25
48.00
2440.16
Factor (dB)
Limit
Margin
(dBuV/m)
(dB)
-6.10
74
26.00
92.28
-2.73
74
4882.87
56.75
10.21
3*
4882.87
50.27
9841.10
Table
Height
ANT
Verdict
(o)
(cm)
Peak
307.6
150
Vertical
Pass
-18.28
Peak
355.3
150
Vertical
N/A
74
14.25
Peak
266.9
150
Vertical
Pass
10.21
54
3.73
AV
266.9
150
Vertical
Pass
48.58
16.79
74
25.42
Peak
300.7
150
Vertical
Pass
16743.34
42.56
20.65
74
31.44
Peak
165
150
Vertical
Pass
22234.61
44.57
8.55
74
29.43
Peak
139.1
150
Vertical
Pass
55
Detector
Report No.: BL-SZ1760349-601
8-DPSK MIDDLE CHANNEL 1 GHz to 25 GHz, ANT H
No.
Frequency
Results
(MHz)
(dBuV/m)
1595.14
52.63
2440.82
Factor (dB)
Limit
Margin
(dBuV/m)
(dB)
-6.05
74
21.37
99.75
-2.70
74
4884.57
52.77
10.25
10717.14
43.97
13623.54
21925.13
Detector
Table
Height
ANT
Verdict
(o)
(cm)
Peak
287.9
150
Horizontal
Pass
-25.75
Peak
54.3
150
Horizontal
N/A
74
21.23
Peak
288.8
150
Horizontal
Pass
15.07
74
30.03
Peak
42.8
150
Horizontal
Pass
44.75
9.11
74
29.25
Peak
165.4
150
Horizontal
Pass
43.96
11.02
74
30.04
Peak
74.4
150
Horizontal
Pass
8-DPSK HIGH CHANNEL 1 GHz to 25 GHz, ANT V
No.
Frequency
Results
(MHz)
(dBuV/m)
1601.34
48.10
2480.18
Factor (dB)
Limit
Margin
(dBuV/m)
(dB)
-6.10
74
25.90
92.83
-2.71
74
4883.10
56.62
10.25
3*
4883.10
50.93
11233.78
Detector
Table
Height
ANT
Verdict
(o)
(cm)
Peak
331.4
150
Vertical
Pass
-18.83
Peak
228
150
Vertical
N/A
74
15.38
Peak
85.8
150
Vertical
Pass
10.25
54
3.07
AV
85.8
150
Vertical
Pass
51.68
14.61
74
22.32
Peak
145.1
150
Vertical
Pass
16545.76
48.65
9.18
74
25.35
Peak
29.5
150
Vertical
Pass
19638.94
46.16
12.53
74
27.84
Peak
151.9
150
Vertical
Pass
Limit
Margin
Detector
(dBuV/m)
(dB)
8-DPSK HIGH CHANNEL 1 GHz to 25 GHz, ANT H
No.
Frequency
Results
Factor (dB)
Table
Height
ANT
Verdict
(MHz)
(dBuV/m)
(o)
(cm)
1596.48
52.87
-6.05
74
21.13
Peak
301.9
150
Horizontal
Pass
2480.32
100.04
-2.70
74
-26.04
Peak
115.4
150
Horizontal
N/A
4880.66
51.97
10.25
74
22.03
Peak
90.5
150
Horizontal
Pass
11694.26
43.54
17.05
74
30.46
Peak
235.1
150
Horizontal
Pass
17086.52
48.28
9.05
74
25.72
Peak
191.6
150
Horizontal
Pass
20836.94
43.97
12.19
74
30.03
Peak
65.8
150
Horizontal
Pass
56
Report No.: BL-SZ1760349-601
Hopping Mode:
GFSK MODE 1 GHz to 25 GHz, ANT V
No.
Frequency
Results
(MHz)
(dBuV/m)
1603.74
47.43
2441.02
Factor (dB)
Limit
Margin
(dBuV/m)
(dB)
-6.10
74
26.57
92.80
-2.71
74
4880.59
58.70
10.25
3*
4880.59
50.49
11267.47
Detector
Table
Height
ANT
Verdict
(o)
(cm)
Peak
25.5
150
Vertical
Pass
-18.80
Peak
258.6
150
Vertical
N/A
74
15.30
Peak
322.9
150
Vertical
Pass
10.25
54
3.51
AV
322.9
150
Vertical
Pass
49.36
20.21
74
24.64
Peak
206.1
150
Vertical
Pass
16420.97
44.46
8.80
74
29.54
Peak
41.9
150
Vertical
Pass
23302.83
43.84
11.72
74
30.16
Peak
339.8
150
Vertical
Pass
GFSK MODE 1 GHz to 25 GHz, ANT H
No.
Frequency
Results
(MHz)
(dBuV/m)
1597.59
52.71
2440.57
Factor (dB)
Limit
Margin
(dBuV/m)
(dB)
-6.06
74
21.29
101.38
-2.70
74
4880.55
52.77
10.25
11391.02
48.92
15630.62
22284.53
Detector
Table
Height
ANT
Verdict
(o)
(cm)
Peak
301.2
150
Horizontal
Pass
-27.38
Peak
248.8
150
Horizontal
N/A
74
21.24
Peak
84.3
150
Horizontal
Pass
16.92
74
25.08
Peak
352.3
150
Horizontal
Pass
43.77
9.06
74
30.23
Peak
91.1
150
Horizontal
Pass
47.94
13.64
74
26.06
Peak
45.9
150
Horizontal
Pass
Limit
Margin
Detector
Table
Height
ANT
Verdict
(dBuV/m)
(dB)
(o)
(cm)
8-DPSK HIGH CHANNEL 1 GHz to 25 GHz, ANT V
No.
Frequency
Results
Factor (dB)
(MHz)
(dBuV/m)
1600.02
48.78
-6.10
74
25.22
Peak
182.2
150
Vertical
Pass
2441.09
92.33
-2.72
74
-18.33
Peak
195.7
150
Vertical
N/A
4882.91
57.07
10.25
74
14.30
Peak
310.1
150
Vertical
Pass
3*
4882.91
49.65
10.25
54
4.35
AV
310.1
150
Vertical
Pass
6056.16
49.71
19.00
74
24.29
Peak
250.9
150
Vertical
Pass
12042.43
44.67
9.69
74
29.33
Peak
228.9
150
Vertical
Pass
22234.61
45.87
11.91
74
28.13
Peak
295.1
150
Vertical
Pass
57
Report No.: BL-SZ1760349-601
8-DPSK HIGH CHANNEL 1 GHz to 25 GHz, ANT H
No.
Frequency
Results
(MHz)
(dBuV/m)
1596.91
52.52
2440.54
Factor (dB)
Limit
Margin
(dBuV/m)
(dB)
-6.06
74
21.48
100.51
-2.72
74
4884.16
51.36
10.25
10076.96
42.61
13665.14
20128.12
Table
Height
ANT
Verdict
(o)
(cm)
Peak
303.2
150
Horizontal
Pass
-26.51
Peak
221.5
150
Horizontal
N/A
74
22.64
Peak
118
150
Horizontal
Pass
20.49
74
31.39
Peak
221.9
150
Horizontal
Pass
44.37
19.51
74
29.64
Peak
91.7
150
Horizontal
Pass
47.41
11.59
74
26.59
Peak
21.3
150
Horizontal
Pass
58
Detector
Report No.: BL-SZ1760349-601
A.9 Band Edge (Restricted-band band-edge)
Note 1: The lowest and highest channels are tested to verify the band edge emissions. Please refer to the following
the plots for emissions values.
Note 2: The test data all are tested in the vertical and horizontal antenna which the trace is max hold. So these
plots have shown the worst case.
Note 3: According the ANSI C63.10-2013, where limits are specified for both average and peak (or quasi-peak)
detector functions, if the peak (or quasi-peak) measured value complies with the average limit, it is unnecessary
to perform an average measurement.
Test Mode
Test
Channel
GFSK
Low
GFSK
HIGH
8-DPSK
Low
8-DPSK
HIGH
GFSK(Hopping)
Low
GFSK(Hopping
HIGH
8-DPSK
(Hopping)
Low
8-DPSK
(Hopping)
HIGH
Frequency
(MHz)
Level
(dBuV/m)
Limit
Line
(dBuV/m)
Margin
(dB)
Remark
Verdict
2390
54.55
74
19.45
PEAK
Pass
2390
34.61
54
19.39
AVERAGE
Pass
2483.5
61.90
74
12.10
PEAK
Pass
2483.5
34.68
54
19.32
AVERAGE
Pass
2390
53.89
74
20.11
PEAK
Pass
2390
N/A
54
N/A
AVERAGE
Pass
2483.5
62.14
74
11.86
PEAK
Pass
2483.5
34.15
54
19.85
AVERAGE
Pass
2390
44.16
74
29.84
PEAK
Pass
2390
N/A
54
N/A
AVERAGE
Pass
2483.5
62.90
74
11.10
PEAK
Pass
2483.5
32.45
54
21.55
AVERAGE
Pass
2390
42.17
74
31.83
PEAK
Pass
2390
N/A
54
N/A
AVERAGE
Pass
2483.5
60.39
74
13.61
PEAK
Pass
2483.5
32.19
54
21.81
AVERAGE
Pass
59
Report No.: BL-SZ1760349-601
Test Plots
GFSK LOW CHANNEL , PEAK
GFSK LOW CHANNEL , AVERAGE
GFSK HIGH CHANNEL , PEAK
GFSK HIGH CHANNEL , AVERAGE
8-DPSK LOW CHANNEL , PEAK
60
Report No.: BL-SZ1760349-601
8-DPSK HIGH CHANNEL, PEAK
8-DPSK HIGH CHANNEL , AVERAGE
Hopping Mode:
GFSK HIGH FREQUENCY BAND, PEAK
GFSK LOW FREQUENCY BAND, PEAK
GFSK HIGH FREQUENCY BAND, AVERAGE
61
Report No.: BL-SZ1760349-601
8-GFSK LOW FREQUENCY BAND, PEAK
8-GFSK HIGH FREQUENCY BAND, PEAK
8-GFSK HIGH FREQUENCY BAND, AVERAGE
62
Report No.: BL-SZ1760349-601
ANNEX B TEST SETUP PHOTOS
Please refer the document “BL-SZ1760349-AR.PDF”.
ANNEX C EUT EXTERNAL PHOTOS
Please refer the document “BL- SZ1760349-AW.PDF”.
ANNEX D EUT INTERNAL PHOTOS
Please refer the document “BL- SZ1760349-AI.PDF”.
--END OF REPORT--
63
Download: TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Mirror Download [FCC.gov]TXSERIES Smart Projector Test Report BL-SZ1760349-601 FCC 15.247 BT3.0 Guizhou CVIM Technology Co., Ltd.
Document ID3548495
Application IDJ6KePMrza29XqZN1Io9SYA==
Document DescriptionTest Report_DSS
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize291.46kB (3643300 bits)
Date Submitted2017-09-07 00:00:00
Date Available2017-09-08 00:00:00
Creation Date2017-08-16 10:58:04
Producing SoftwareAcrobat Distiller 10.1.16 (Windows)
Document Lastmod2017-08-16 15:26:33
Document TitleBL-SZ1760349-601 FCC 15.247 BT3.0
Document CreatorPScript5.dll Version 5.2.2
Document Author: hongmei.li

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2017:08:16 15:26:33+08:00
Create Date                     : 2017:08:16 10:58:04+08:00
Metadata Date                   : 2017:08:16 15:26:33+08:00
Format                          : application/pdf
Title                           : Microsoft Word - BL-SZ1760349-601 FCC 15.247 BT3.0
Creator                         : hongmei.li
Producer                        : Acrobat Distiller 10.1.16 (Windows)
Document ID                     : uuid:bf2db033-99cd-47ce-aff1-4facfac9577f
Instance ID                     : uuid:60c55c0a-ab80-476c-bdde-d0856deb862c
Page Count                      : 63
Author                          : hongmei.li
EXIF Metadata provided by EXIF.tools

Facebook Twitter Google+ RSS © FCCID.io 2017