FCC ID 2AL6KBL-R8189RM2

802.11b/g/n 150Mbps 1T1R SDIO WLAN Module

by ShenZhen BiLian Electronic Co.,Ltd.

Grantee Code: 2AL6K   Product Code: BLR8189RM2
Latest application date: 2024-01-31

FCC ID Device Details

FCC ID2AL6KBL-R8189RM2
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AL6K
Product CodeBLR8189RM2
Applicant BusinessShenZhen BiLian Electronic Co.,Ltd. 🇨🇳
Related Domains b-link.net.cn
Equipment Class802.11b/g/n 150Mbps 1T1R SDIO WLAN Module
Test FirmShenzhen ZKT Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2024-01-31
2412-2462 MHzOriginal Equipment2022-11-07

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2024-01-31PDF 604.1 KB
User manualUsers Manual2022-11-07PDF 1.1 MB
Internal photoInternal Photos2024-01-31PDF 1.4 MB
Internal photosInternal Photos2022-11-07PDF 416.4 KB
External photoExternal Photos2024-01-31PDF 4.3 MB
External PhotosExternal Photos2022-11-07PDF 103.2 KB
LabelExternal Photos2022-11-07PDF 49.3 KB
label and locationID Label/Location Info2024-01-31PDF 179.8 KB
Label locationID Label/Location Info2022-11-07PDF 86.9 KB
test setup photoTest Setup Photos2024-01-31PDF 1.5 MB
Test setupTest Setup Photos2022-11-07PDF 171.6 KB
Antenna specTest Report2024-01-31PDF 460.1 KB
FCC15.247 2.4G WIFI reportTest Report2024-01-31PDF 4.7 MB
Antenna specificationTest Report2022-11-07PDF 365.2 KB
Test reportTest Report2022-11-07PDF 3.4 MB
2.911 (d)(7) US Agent for Service of Process v1.4Attestation Statements2024-01-31PDF 682.6 KB
Certification ApplicantAttestation Statements2024-01-31PDF 90.3 KB
Certification Equipment TypeAttestation Statements2024-01-31PDF 92.8 KB
US agent for service of processAttestation Statements2024-01-31PDF 122.3 KB
Agent AuthorizationCover Letter(s)2024-01-31PDF 64.2 KB
Confidentiality Request letterCover Letter(s)2024-01-31PDF 44.4 KB
FCC Modular Approval RequestCover Letter(s)2024-01-31PDF 76.4 KB
Cover LetterCover Letter(s)2022-11-07PDF 117 KB
RF exposureRF Exposure Info2024-01-31PDF 93.4 KB
RF ExposureRF Exposure Info2022-11-07PDF 46.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 50.2 KB
Block diagram Metadata onlyBlock DiagramPDF 100.3 KB
Schematics Metadata onlySchematicsPDF 28.1 KB
Schematics Metadata onlySchematicsPDF 21.8 KB
Operation description Metadata onlyOperational DescriptionPDF 70.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 76.6 KB

Application Information

Application IDHbh2wEKPCU8vu3Rx/Op46A==
Final Action Date2024-01-31
Application PurposeOriginal Equipment
Applicant FRN0026535013
ModelBL-R8189RM2
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11b/g/n 150Mbps 1T1R SDIO WLAN Module
Responsible PartyHanbing Deng, manager, rdh05@b-link.net.cn , 18118768735
Technical ContactShenZhen BiLian Electronic Co.,Ltd., rdh05@b-link.net.cn
Test FirmLake Xie, Shenzhen ZKT Technology Co., Ltd., zkt@zkt-lab.com , 0086-13620010775
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsLimited Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. this module is restricted to grantee won host products only, each new host configuration requires a Class II Permissive Change filing by the Grantee, and all host end products must be sold with approved antenna(s).

Applications

Application IDDatePurpose
Hbh2wEKPCU8vu3Rx/Op46A==2024-01-31Original Equipment
A/Wa/TSCLneBlvZxC9gDVQ==2022-11-07Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.046340015C
2412-2462 MHz0.048430015C

Grants

TCB Grant - Application Hbh2wEKPCU8vu3Rx/Op46A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 01/31/2024

Application Dated: 01/23/2024
ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road,
Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-R8189RM2
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: 802.11b/g/n 150Mbps 1T1R SDIO WLAN Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.04843  

Limited Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. this module is restricted to grantee won host products only, each new host configuration requires a Class II Permissive Change filing by the Grantee, and all host end products must be sold with approved antenna(s).

EAS Grant - Application Hbh2wEKPCU8vu3Rx/Op46A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road, Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
  Date of Grant: 01/31/2024

Application Dated: 01/23/2024
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-R8189RM2
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: 802.11b/g/n 150Mbps 1T1R SDIO WLAN Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.04843  

Limited Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. this module is restricted to grantee won host products only, each new host configuration requires a Class II Permissive Change filing by the Grantee, and all host end products must be sold with approved antenna(s).



TCB Grant - Application A/Wa/TSCLneBlvZxC9gDVQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204
Date of Grant: 11/07/2022

Application Dated: 11/07/2022
ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road,
Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6K-BL-R8189RM2
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: 2.4GHz wifi mainboard
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.04634  

Output power listed is conducted. This device must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth mode.

EAS Grant - Application A/Wa/TSCLneBlvZxC9gDVQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road, Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
  Date of Grant: 11/07/2022

Application Dated: 11/07/2022
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6K-BL-R8189RM2
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: 2.4GHz wifi mainboard
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.04634  

Output power listed is conducted. This device must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth mode.



Mail To: