FCC ID 2AL6KBL-M7663BU3

802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth v5.1 USB Combo Module

by ShenZhen BiLian Electronic Co.,Ltd.

Grantee Code: 2AL6K   Product Code: BLM7663BU3
Latest application date: 2022-12-30

FCC ID Device Details

FCC ID2AL6KBL-M7663BU3
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AL6K
Product CodeBLM7663BU3
Applicant BusinessShenZhen BiLian Electronic Co.,Ltd. 🇨🇳
Equipment Class802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth v5.1 USB Combo Module
Test FirmShenzhen Global Test Service Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2022-12-30
2402-2480 MHzOriginal Equipment2022-12-30
2412-2462 MHzOriginal Equipment2022-12-30

Exhibits

DocumentTypeAvailableFile
U ManualUsers Manual2022-12-30PDF 1.2 MB
User ManualUsers Manual2022-12-30PDF 1.2 MB
user manualUsers Manual2022-12-30PDF 1.2 MB
Internal PhotosInternal Photos2022-12-30PDF 660.7 KB
Internal photoInternal Photos2022-12-30PDF 660.7 KB
External PhotosExternal Photos2022-12-30PDF 498.6 KB
External photoExternal Photos2022-12-30PDF 498.6 KB
External photosExternal Photos2022-12-30PDF 498.6 KB
Label locationID Label/Location Info2022-12-30PDF 170.5 KB
LabelandLocationID Label/Location Info2022-12-30PDF 170.5 KB
label&label locationID Label/Location Info2022-12-30PDF 170.5 KB
Test Setup PhotosTest Setup Photos2022-12-30PDF 478.5 KB
Test Setup photosTest Setup Photos2022-12-30PDF 478.5 KB
Antenna SpecificationTest Report2022-12-30PDF 718.4 KB
Antenna SpecificationsTest Report2022-12-30PDF 718.4 KB
Antenna specificationTest Report2022-12-30PDF 718.4 KB
Test ReportTest Report2022-12-30PDF 4.2 MB
Test ReportTest Report2022-12-30PDF 4.4 MB
Test ReportTest Report2022-12-30PDF 5.8 MB
Agent Authorization Rev 1.0Cover Letter(s)2022-12-30PDF 10 KB
AgentAuthorizationRev1.0Cover Letter(s)2022-12-30PDF 10 KB
FCC Modular Approval JustificationCover Letter(s)2022-12-30PDF 87.2 KB
FCC Modular Approval Request Rev 3.0Cover Letter(s)2022-12-30PDF 87.2 KB
FCC Modular Approval Request Rev 3.0_rev1Cover Letter(s)2022-12-30PDF 87.2 KB
FCC Short_Long Term Confidentiality Request Rev4.1Cover Letter(s)2022-12-30PDF 57.3 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2022-12-30PDF 51.6 KB
LongTermConfidentialityRequestCover Letter(s)2022-12-30PDF 57.3 KB
Long_Term_ConfidentialityCover Letter(s)2022-12-30PDF 57.3 KB
RFexposureRF Exposure Info2022-12-30PDF 730.6 KB
Block Metadata onlyBlock DiagramPDF 401.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 401.2 KB
SCH Metadata onlySchematicsPDF 78.7 KB
OP Metadata onlyOperational DescriptionPDF 337.4 KB
Software Security Requirements Metadata onlySDR Software/Security InfPDF 196.6 KB

Application Information

Application IDTDCI1m5w7h99EeL7b0Py+g==
Final Action Date2022-12-30
Application PurposeOriginal Equipment
Applicant FRN0026535013
ModelBL-M7663BU3
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth v5.1 USB Combo Module
Responsible PartyHanbing Deng, manager, 516371599@qq.com , 18118768735
Technical ContactShenzhen Bilian Electronic Co.,Ltd., 516371599@qq.com
Test FirmSimon Hu, Shenzhen Global Test Service Co., Ltd., huxiaolong@gtscert.com , 86-137-286-828-40
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
TDCI1m5w7h99EeL7b0Py+g==2022-12-30Original Equipment
NEwJLoSgs/gIL6cWb7T4yQ==2022-12-30Original Equipment
C4uKi7wPoTq3cyg3LKlcBQ==2022-12-30Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.000615CCC
2402-2480 MHz0.013400015CCC
2412-2462 MHz0.084315CCC, MO
5180-5240 MHz0.044415ECC, MO
5260-5320 MHz0.046315ECC, MO, ND
5500-5700 MHz0.064615ECC, MO, ND
5745-5825 MHz0.051915ECC, MO

Grants

TCB Grant - Application TDCI1m5w7h99EeL7b0Py+g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 12/30/2022

Application Dated: 12/30/2022
ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road,
Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-M7663BU3
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth v5.1 USB Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0444  
CC MO ND 15E 5260.0  -  5320.0 0.0463  
CC MO ND 15E 5500.0  -  5700.0 0.0646  
CC MO 15E 5745.0  -  5825.0 0.0519  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application TDCI1m5w7h99EeL7b0Py+g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road, Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
  Date of Grant: 12/30/2022

Application Dated: 12/30/2022
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-M7663BU3
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth v5.1 USB Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0444  
CC MO ND 15E 5260.0  -  5320.0 0.0463  
CC MO ND 15E 5500.0  -  5700.0 0.0646  
CC MO 15E 5745.0  -  5825.0 0.0519  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application NEwJLoSgs/gIL6cWb7T4yQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 12/30/2022

Application Dated: 12/30/2022
ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road,
Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-M7663BU3
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth v5.1 USB Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0134  

Single Modular Approval. Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application NEwJLoSgs/gIL6cWb7T4yQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road, Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
  Date of Grant: 12/30/2022

Application Dated: 12/30/2022
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-M7663BU3
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth v5.1 USB Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0134  

Single Modular Approval. Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application C4uKi7wPoTq3cyg3LKlcBQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 12/30/2022

Application Dated: 12/30/2022
ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road,
Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-M7663BU3
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth v5.1 USB Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0006  
CC MO 15C 2412.0  -  2462.0 0.0843  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application C4uKi7wPoTq3cyg3LKlcBQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road, Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
  Date of Grant: 12/30/2022

Application Dated: 12/30/2022
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-M7663BU3
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth v5.1 USB Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0006  
CC MO 15C 2412.0  -  2462.0 0.0843  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: