FCC ID 2AL6KBL-M8821CS1

IEEE 802.11 a/b/g/n/ac(1T1R)WLAN with Bluetooth Module

by ShenZhen BiLian Electronic Co.,Ltd.

Grantee Code: 2AL6K   Product Code: BLM8821CS1
Latest application date: 2020-01-06

FCC ID Device Details

FCC ID2AL6KBL-M8821CS1
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AL6K
Product CodeBLM8821CS1
Applicant BusinessShenZhen BiLian Electronic Co.,Ltd. 🇨🇳
Equipment ClassIEEE 802.11 a/b/g/n/ac(1T1R)WLAN with Bluetooth Module
Test FirmShenzhen Global Test Service Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2020-01-06
2402-2480 MHzOriginal Equipment2020-01-06
5180-5240 MHzOriginal Equipment2020-01-06

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2020-01-06PDF 1.6 MB
User manualUsers Manual2020-01-06PDF 1.6 MB
Internal photosInternal Photos2020-01-06PDF 693.3 KB
External photosExternal Photos2020-01-06PDF 474.7 KB
Label and LocationID Label/Location Info2020-01-06PDF 121.5 KB
label and label locationID Label/Location Info2020-01-06PDF 121.5 KB
Test Setup PhotosTest Setup Photos2020-01-06PDF 240.1 KB
Test setup photosTest Setup Photos2020-01-06PDF 240.1 KB
Test Report-DTS-2G4WLANTest Report2020-01-06PDF 4.1 MB
Test Report-DTS-BT LETest Report2020-01-06PDF 1.5 MB
Test report-DSSTest Report2020-01-06PDF 5.4 MB
Test report-NII-Part1Test Report2020-01-06PDF 2.4 MB
Test report-NII-Part2Test Report2020-01-06PDF 4.3 MB
Declaration of Disable WLAN Channel 12 and 13Cover Letter(s)2020-01-06PDF 144.8 KB
FCC Confidentiality request letterCover Letter(s)2020-01-06PDF 70.8 KB
FCC UNII Device Declaration LetterCover Letter(s)2020-01-06PDF 25.6 KB
POACover Letter(s)2020-01-06PDF 70.6 KB
Request Modular Transmitter ApprovalCover Letter(s)2020-01-06PDF 52.7 KB
RF Exposure Info-MPE reportRF Exposure Info2020-01-06PDF 419.3 KB
RF exposure info-MPERF Exposure Info2020-01-06PDF 419.3 KB
Block diagram Metadata onlyBlock DiagramPDF 140.6 KB
Schematic Metadata onlySchematicsPDF 78 KB
Schematics Metadata onlySchematicsPDF 78 KB
Declaration Letter of Software Security Requirements Metadata onlyOperational DescriptionPDF 188.4 KB
Declaration concerning Antenna Specification Metadata onlyOperational DescriptionPDF 95.6 KB
Operation Description Metadata onlyOperational DescriptionPDF 180.5 KB

Application Information

Application IDUVWPw9672E5h6/Uo7wJGcQ==
Final Action Date2020-01-06
Application PurposeOriginal Equipment
Applicant FRN0026535013
ModelBL-M8821CS1
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionIEEE 802.11 a/b/g/n/ac(1T1R)WLAN with Bluetooth Module
Responsible PartyHanbing Deng, manager, 516371599@qq.com , 18118768735
Test FirmJunwen Liu, Shenzhen Global Test Service Co., Ltd., liujunwen@gtscert.com , 0755-28717088-868
TCB Emailjoergkusig@eurofins.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is 2.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Applications

Application IDDatePurpose
UVWPw9672E5h6/Uo7wJGcQ==2020-01-06Original Equipment
D2KYbHLopDzmh/Nf48Ga0A==2020-01-06Original Equipment
BCvMHGn4BQxDtoMVuURQ6Q==2020-01-06Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.003100015CCC
2402-2480 MHz0.002315CCC
2412-2462 MHz0.039615CCC
2422-2452 MHz0.021715CCC
5180-5240 MHz0.015815ECC
5190-5230 MHz0.01515ECC
5210 MHz0.013515ECC
5745-5825 MHz0.009715ECC
5755-5795 MHz0.009515ECC
5775 MHz0.008915ECC

Grants

TCB Grant - Application UVWPw9672E5h6/Uo7wJGcQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 01/06/2020

Application Dated: 01/06/2020
ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road,
Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-M8821CS1
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac(1T1R)WLAN with Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0023  
CC 15C 2412.0  -  2462.0 0.0396  
CC 15C 2422.0  -  2452.0 0.0217  

Single Modular Approval. Output power listed is peak conducted.

This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

The maximum antenna gain is 2.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application UVWPw9672E5h6/Uo7wJGcQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road, Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
  Date of Grant: 01/06/2020

Application Dated: 01/06/2020
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-M8821CS1
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac(1T1R)WLAN with Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0023  
CC 15C 2412.0  -  2462.0 0.0396  
CC 15C 2422.0  -  2452.0 0.0217  

Single Modular Approval. Output power listed is peak conducted.

This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

The maximum antenna gain is 2.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application D2KYbHLopDzmh/Nf48Ga0A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 01/06/2020

Application Dated: 01/06/2020
ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road,
Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-M8821CS1
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11 a/b/g/n/ac(1T1R)WLAN with Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0031  

Single Modular Approval. Output power listed is peak conducted.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

The maximum antenna gain is 2.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application D2KYbHLopDzmh/Nf48Ga0A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road, Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
  Date of Grant: 01/06/2020

Application Dated: 01/06/2020
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-M8821CS1
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11 a/b/g/n/ac(1T1R)WLAN with Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0031  

Single Modular Approval. Output power listed is peak conducted.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

The maximum antenna gain is 2.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application BCvMHGn4BQxDtoMVuURQ6Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 01/06/2020

Application Dated: 01/06/2020
ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road,
Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-M8821CS1
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n/ac(1T1R)WLAN with Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0158  
CC 15E 5190.0  -  5230.0 0.015  
CC 15E 5210.0  -  5210.0 0.0135  
CC 15E 5745.0  -  5825.0 0.0097  
CC 15E 5755.0  -  5795.0 0.0095  
CC 15E 5775.0  -  5775.0 0.0089  

Single Modular Approval. Output power listed is average conducted.

This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

The maximum antenna gain is 2.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application BCvMHGn4BQxDtoMVuURQ6Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road, Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
  Date of Grant: 01/06/2020

Application Dated: 01/06/2020
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-M8821CS1
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n/ac(1T1R)WLAN with Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0158  
CC 15E 5190.0  -  5230.0 0.015  
CC 15E 5210.0  -  5210.0 0.0135  
CC 15E 5745.0  -  5825.0 0.0097  
CC 15E 5755.0  -  5795.0 0.0095  
CC 15E 5775.0  -  5775.0 0.0089  

Single Modular Approval. Output power listed is average conducted.

This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

The maximum antenna gain is 2.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: