FCC ID 2AL6KBL-M8821CU1

IEEE 802.11a/b/g/n/ac(1T1R)USB WIFI+BT Combo Module

by ShenZhen BiLian Electronic Co.,Ltd.

Grantee Code: 2AL6K   Product Code: BLM8821CU1
Latest application date: 2020-01-07

FCC ID Device Details

FCC ID2AL6KBL-M8821CU1
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AL6K
Product CodeBLM8821CU1
Applicant BusinessShenZhen BiLian Electronic Co.,Ltd. 🇨🇳
Equipment ClassIEEE 802.11a/b/g/n/ac(1T1R)USB WIFI+BT Combo Module
Test FirmShenzhen Global Test Service Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2020-01-07
2402-2480 MHzOriginal Equipment2020-01-07
5180-5240 MHzOriginal Equipment2020-01-07

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2020-01-07PDF 2 MB
User manualUsers Manual2020-01-07PDF 2 MB
Internal PhotosInternal Photos2020-01-07PDF 568.4 KB
Internal photosInternal Photos2020-01-07PDF 568.4 KB
External photosExternal Photos2020-01-07PDF 466.6 KB
Label and LocationID Label/Location Info2020-01-07PDF 147.5 KB
Label and locationID Label/Location Info2020-01-07PDF 147.5 KB
label and label locationID Label/Location Info2020-01-07PDF 147.5 KB
Test Setup PhotosTest Setup Photos2020-01-07PDF 243.5 KB
Test setup photosTest Setup Photos2020-01-07PDF 243.5 KB
Test Report-DTS-2G4WLANTest Report2020-01-07PDF 4.1 MB
Test Report-DTS-BLETest Report2020-01-07PDF 1.5 MB
Test report-DSSTest Report2020-01-07PDF 5.3 MB
Test report-NII-Part1Test Report2020-01-07PDF 2.4 MB
Test report-NII-Part2Test Report2020-01-07PDF 4.3 MB
FCC Confidentiality request letterCover Letter(s)2020-01-07PDF 70.8 KB
FCC Declaration of Disable WLAN Channel 12 and 13Cover Letter(s)2020-01-07PDF 145 KB
FCC POACover Letter(s)2020-01-07PDF 70.9 KB
FCC UNII Device Declaration LetterCover Letter(s)2020-01-07PDF 25.6 KB
Request Limited Modular Transmitter ApprovalCover Letter(s)2020-01-07PDF 54.4 KB
RF Exposure Info-MPERF Exposure Info2020-01-07PDF 423.1 KB
RF Exposure Info-MPE ReportRF Exposure Info2020-01-07PDF 423.1 KB
RF exposure info-MPERF Exposure Info2020-01-07PDF 423.1 KB
Block diagram Metadata onlyBlock DiagramPDF 193.9 KB
Schematic Metadata onlySchematicsPDF 211.6 KB
Schematics Metadata onlySchematicsPDF 211.6 KB
Declaration Letter of Software Security Requirements Metadata onlyOperational DescriptionPDF 188.4 KB
Declaration concerning Antenna Specification Metadata onlyOperational DescriptionPDF 95.8 KB
Operation Description Metadata onlyOperational DescriptionPDF 181.2 KB
Operation description Metadata onlyOperational DescriptionPDF 181.2 KB

Application Information

Application IDqdFWu0bCD674Szj3NSgCRw==
Final Action Date2020-01-07
Application PurposeOriginal Equipment
Applicant FRN0026535013
ModelBL-M8821CU1
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionIEEE 802.11a/b/g/n/ac(1T1R)USB WIFI+BT Combo Module
Responsible PartyHanbing Deng, manager, 516371599@qq.com , 18118768735
Test FirmJunwen Liu, Shenzhen Global Test Service Co., Ltd., liujunwen@gtscert.com , 0755-28717088-868
TCB Emailjoergkusig@eurofins.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Single Modular Approval. Output power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is 2.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Applications

Application IDDatePurpose
qdFWu0bCD674Szj3NSgCRw==2020-01-07Original Equipment
i7Q1pou2sf8tpMc9vya9gQ==2020-01-07Original Equipment
Pg7Pf1GZqV2alIlTNqzPmg==2020-01-07Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002415CCC
2402-2480 MHz0.031000015CCC
2412-2462 MHz0.039415CCC
2422-2452 MHz0.023815CCC
5180-5240 MHz0.019415ECC
5190-5230 MHz0.017515ECC
5210 MHz0.017615ECC
5745-5825 MHz0.012415ECC
5755-5795 MHz0.010815ECC
5775 MHz0.010615ECC

Grants

TCB Grant - Application qdFWu0bCD674Szj3NSgCRw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 01/07/2020

Application Dated: 01/06/2020
ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road,
Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-M8821CU1
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11a/b/g/n/ac(1T1R)USB WIFI+BT Combo Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.031  

Limited Single Modular Approval. Output power listed is peak conducted.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

The maximum antenna gain is 2.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application qdFWu0bCD674Szj3NSgCRw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road, Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
  Date of Grant: 01/07/2020

Application Dated: 01/06/2020
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-M8821CU1
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11a/b/g/n/ac(1T1R)USB WIFI+BT Combo Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.031  

Limited Single Modular Approval. Output power listed is peak conducted.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

The maximum antenna gain is 2.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Pg7Pf1GZqV2alIlTNqzPmg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 01/07/2020

Application Dated: 01/07/2020
ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road,
Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-M8821CU1
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11a/b/g/n/ac(1T1R)USB WIFI+BT Combo Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0194  
CC 15E 5190.0  -  5230.0 0.0175  
CC 15E 5210.0  -  5210.0 0.0176  
CC 15E 5745.0  -  5825.0 0.0124  
CC 15E 5755.0  -  5795.0 0.0108  
CC 15E 5775.0  -  5775.0 0.0106  

Limited Single Modular Approval. Output power listed is average conducted.

This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

The maximum antenna gain is 2.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Pg7Pf1GZqV2alIlTNqzPmg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road, Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
  Date of Grant: 01/07/2020

Application Dated: 01/07/2020
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-M8821CU1
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11a/b/g/n/ac(1T1R)USB WIFI+BT Combo Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0194  
CC 15E 5190.0  -  5230.0 0.0175  
CC 15E 5210.0  -  5210.0 0.0176  
CC 15E 5745.0  -  5825.0 0.0124  
CC 15E 5755.0  -  5795.0 0.0108  
CC 15E 5775.0  -  5775.0 0.0106  

Limited Single Modular Approval. Output power listed is average conducted.

This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

The maximum antenna gain is 2.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application i7Q1pou2sf8tpMc9vya9gQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 01/07/2020

Application Dated: 01/06/2020
ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road,
Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-M8821CU1
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11a/b/g/n/ac(1T1R)USB WIFI+BT Combo Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0024  
CC 15C 2412.0  -  2462.0 0.0394  
CC 15C 2422.0  -  2452.0 0.0238  

Limited Single Modular Approval. Output power listed is peak conducted.

This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

The maximum antenna gain is 2.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application i7Q1pou2sf8tpMc9vya9gQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ShenZhen BiLian Electronic Co.,Ltd.
Room 501,Building 3,No.32,Dafu Road, Zhangge Community,FuchengStreet,Longhua District,
Shenzhen, 518000
China
  Date of Grant: 01/07/2020

Application Dated: 01/06/2020
 
Attention: Hanbing Deng , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AL6KBL-M8821CU1
Name of Grantee:  ShenZhen BiLian Electronic Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11a/b/g/n/ac(1T1R)USB WIFI+BT Combo Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0024  
CC 15C 2412.0  -  2462.0 0.0394  
CC 15C 2422.0  -  2452.0 0.0238  

Limited Single Modular Approval. Output power listed is peak conducted.

This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

The maximum antenna gain is 2.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: