FCC ID 2AL6KBL-R8811CU9
802.11a/b/g/n/ac 433Mbps WiFi USB Module
by ShenZhen BiLian Electronic Co.,Ltd.
Grantee Code: 2AL6K Product Code: BLR8811CU9
Latest application date: 2023-01-16
FCC ID Device Details
| FCC ID | 2AL6KBL-R8811CU9 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AL6K |
| Product Code | BLR8811CU9 |
| Applicant Business | ShenZhen BiLian Electronic Co.,Ltd. 🇨🇳 |
| Equipment Class | 802.11a/b/g/n/ac 433Mbps WiFi USB Module |
| Test Firm | Shenzhen Global Test Service Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5745-5825 MHz | Original Equipment | 2023-01-16 |
| 2412-2462 MHz | Original Equipment | 2023-01-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| U Manual | Users Manual | 2023-01-16 | PDF 749.2 KB |
| User Manual | Users Manual | 2023-01-16 | PDF 749.2 KB |
| Internal Photos | Internal Photos | 2023-01-16 | PDF 716.7 KB |
| Internal photo | Internal Photos | 2023-01-16 | PDF 716.7 KB |
| External Photos | External Photos | 2023-01-16 | PDF 455 KB |
| External photo | External Photos | 2023-01-16 | PDF 455 KB |
| Label location | ID Label/Location Info | 2023-01-16 | PDF 181.8 KB |
| label&label location | ID Label/Location Info | 2023-01-16 | PDF 181.8 KB |
| Test Setup Photos | Test Setup Photos | 2023-01-16 | PDF 452.7 KB |
| Test Setup photos | Test Setup Photos | 2023-01-16 | PDF 452.7 KB |
| Antenna Specification | Test Report | 2023-01-16 | PDF 723.7 KB |
| Antenna specification | Test Report | 2023-01-16 | PDF 723.7 KB |
| Test Report | Test Report | 2023-01-16 | PDF 4.2 MB |
| Test Report | Test Report | 2023-01-16 | PDF 5.6 MB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2023-01-16 | PDF 10 KB |
| AgentAuthorizationRev1.0 | Cover Letter(s) | 2023-01-16 | PDF 10 KB |
| FCC Modular Approval Justification | Cover Letter(s) | 2023-01-16 | PDF 87.2 KB |
| FCC Modular Approval Request Rev 3.0_rev1 | Cover Letter(s) | 2023-01-16 | PDF 87.2 KB |
| FCC Short_Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2023-01-16 | PDF 57.3 KB |
| FCC Software Configuration Control Declaration Rev1.0 | Cover Letter(s) | 2023-01-16 | PDF 51.5 KB |
| Long_Term_Confidentiality | Cover Letter(s) | 2023-01-16 | PDF 57.3 KB |
| RFexposure | RF Exposure Info | 2023-01-16 | PDF 527.4 KB |
| Block Metadata only | Block Diagram | PDF 128 KB | |
| BlockDiagram Metadata only | Block Diagram | PDF 128 KB | |
| SCH Metadata only | Schematics | PDF 524.8 KB | |
| OP Metadata only | Operational Description | PDF 201.9 KB | |
| software security requirement Metadata only | SDR Software/Security Inf | PDF 196.6 KB |
Application Information
| Application ID | pmpFBXSvm/Sh4hr5YTzlFQ== |
|---|---|
| Final Action Date | 2023-01-16 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0026535013 |
| Model | BL-R8811CU9 |
| Frequency Range | 5745-5825 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11a/b/g/n/ac 433Mbps WiFi USB Module |
| Responsible Party | Hanbing Deng, manager, 516371599@qq.com  , 18118768735 |
| Technical Contact | Shenzhen Bilian Electronic Co.,Ltd., 516371599@qq.com |
| Test Firm | Simon Hu, Shenzhen Global Test Service Co., Ltd., huxiaolong@gtscert.com  , 86-137-286-828-40 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| pmpFBXSvm/Sh4hr5YTzlFQ== | 2023-01-16 | Original Equipment |
| Agao/WW1S2GoMlD+svxj2w== | 2023-01-16 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application pmpFBXSvm/Sh4hr5YTzlFQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/16/2023 Application Dated: 01/16/2023 |
| ShenZhen BiLian Electronic Co.,Ltd. |
| Room 501,Building 3,No.32,Dafu Road, |
| Zhangge Community,FuchengStreet,Longhua District, |
| Shenzhen, 518000 China |
| Attention: Hanbing Deng , manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AL6KBL-R8811CU9 |
| Name of Grantee: | ShenZhen BiLian Electronic Co.,Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n/ac 433Mbps WiFi USB Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0214 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0122 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0126 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0163 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application pmpFBXSvm/Sh4hr5YTzlFQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ShenZhen BiLian Electronic Co.,Ltd. Room 501,Building 3,No.32,Dafu Road, Zhangge Community,FuchengStreet,Longhua District, Shenzhen, 518000 China |
Date of Grant: 01/16/2023 Application Dated: 01/16/2023 |
| Attention: Hanbing Deng , manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AL6KBL-R8811CU9 |
| Name of Grantee: | ShenZhen BiLian Electronic Co.,Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n/ac 433Mbps WiFi USB Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0214 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0122 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0126 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0163 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/16/2023 Application Dated: 01/16/2023 |
| ShenZhen BiLian Electronic Co.,Ltd. |
| Room 501,Building 3,No.32,Dafu Road, |
| Zhangge Community,FuchengStreet,Longhua District, |
| Shenzhen, 518000 China |
| Attention: Hanbing Deng , manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AL6KBL-R8811CU9 |
| Name of Grantee: | ShenZhen BiLian Electronic Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n/ac 433Mbps WiFi USB Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.104 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Agao/WW1S2GoMlD+svxj2w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ShenZhen BiLian Electronic Co.,Ltd. Room 501,Building 3,No.32,Dafu Road, Zhangge Community,FuchengStreet,Longhua District, Shenzhen, 518000 China |
Date of Grant: 01/16/2023 Application Dated: 01/16/2023 |
| Attention: Hanbing Deng , manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AL6KBL-R8811CU9 |
| Name of Grantee: | ShenZhen BiLian Electronic Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n/ac 433Mbps WiFi USB Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.104 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |