FCC ID 2AL85-LUX-32
Wifi/BT module
by LUXROBO
Grantee Code: 2AL85 Product Code: LUX32
Latest application date: 2017-07-19
FCC ID Device Details
| FCC ID | 2AL85-LUX-32 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AL85 |
| Product Code | LUX32 |
| Applicant Business | LUXROBO 🇰🇷 |
| Related Domains |  luxrobo.com |
| Equipment Class | Wifi/BT module |
| Test Firm | TA Technology (Shanghai) Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2017-07-19 |
| 2402-2480 MHz | Original Equipment | 2017-07-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2017-07-19 | PDF 604.8 KB |
| Internal Photos | Internal Photos | 2017-07-19 | PDF 144.4 KB |
| External Photos | External Photos | 2017-07-19 | PDF 142.1 KB |
| Label Location | ID Label/Location Info | 2017-07-19 | PDF 129.6 KB |
| Test Setup Photos | Test Setup Photos | 2017-07-19 | PDF 227 KB |
| MPE Test Report | RF Exposure Info | 2017-07-19 | PDF 262 KB |
| Part 15B Test Report | Test Report | 2017-07-19 | PDF 1.2 MB |
| Part 15C BT Test Report | Test Report | 2017-07-19 | PDF 4.8 MB |
| Test Report WiFi | Test Report | 2017-07-19 | PDF 5.5 MB |
| Confidentiality Request | Cover Letter(s) | 2017-07-19 | PDF 60.5 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2017-07-19 | PDF 60.5 KB |
| Modular Approval Letter | Cover Letter(s) | 2017-07-19 | PDF 88.1 KB |
| POA | Cover Letter(s) | 2017-07-19 | PDF 25 KB |
| Block Diagram Metadata only | Block Diagram | PDF 6.2 KB | |
| Schematics Metadata only | Schematics | PDF 15.5 KB | |
| Technical Description Metadata only | Operational Description | PDF 19.3 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 46.7 KB |
Application Information
| Application ID | SCwYMN61QI2bvHW6vc0g9w== |
|---|---|
| Final Action Date | 2017-07-19 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0026554204 |
| Model | LUX-32 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wifi/BT module |
| Responsible Party | Han S Kang, Mr., cco.hskang@luxrobo.com , 82 10 2288 0105 |
| Test Firm | Zhihui Liu, TA Technology (Shanghai) Co., Ltd., liuzhihui@ta-shanghai.com  , 86-21-50791141 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. This device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| SCwYMN61QI2bvHW6vc0g9w== | 2017-07-19 | Original Equipment |
| DqjVolGACXolcqxDKIk+kg== | 2017-07-19 | Original Equipment |
| 3irwOtLmdgfPPS3ch+BMQg== | 2017-07-19 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application SCwYMN61QI2bvHW6vc0g9w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/19/2017 Application Dated: 07/19/2017 |
| LUXROBO |
| 50, 63-ro, Yeoungdeungpo-gu, 63city 4th floor |
| Seoul, South Korea |
| Attention: Han Kang , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AL85-LUX-32 |
| Name of Grantee: | LUXROBO |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi/BT module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.048 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0004 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. This device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application SCwYMN61QI2bvHW6vc0g9w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LUXROBO 50, 63-ro, Yeoungdeungpo-gu, 63city 4th floor Seoul, South Korea |
Date of Grant: 07/19/2017 Application Dated: 07/19/2017 |
| Attention: Han Kang , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AL85-LUX-32 |
| Name of Grantee: | LUXROBO |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi/BT module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.048 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0004 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. This device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/19/2017 Application Dated: 07/19/2017 |
| LUXROBO |
| 50, 63-ro, Yeoungdeungpo-gu, 63city 4th floor |
| Seoul, South Korea |
| Attention: Han Kang , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AL85-LUX-32 |
| Name of Grantee: | LUXROBO |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Wifi/BT module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application DqjVolGACXolcqxDKIk+kg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LUXROBO 50, 63-ro, Yeoungdeungpo-gu, 63city 4th floor Seoul, South Korea |
Date of Grant: 07/19/2017 Application Dated: 07/19/2017 |
| Attention: Han Kang , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AL85-LUX-32 |
| Name of Grantee: | LUXROBO |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Wifi/BT module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/19/2017 Application Dated: 07/19/2017 |
| LUXROBO |
| 50, 63-ro, Yeoungdeungpo-gu, 63city 4th floor |
| Seoul, South Korea |
| Attention: Han Kang , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AL85-LUX-32 |
| Name of Grantee: | LUXROBO |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wifi/BT module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. This device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 3irwOtLmdgfPPS3ch+BMQg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LUXROBO 50, 63-ro, Yeoungdeungpo-gu, 63city 4th floor Seoul, South Korea |
Date of Grant: 07/19/2017 Application Dated: 07/19/2017 |
| Attention: Han Kang , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AL85-LUX-32 |
| Name of Grantee: | LUXROBO |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wifi/BT module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. This device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |