FCC ID 2ALAY-SHELLYPLUS1

Smart switch

by Allterco Robotics

Grantee Code: 2ALAY   Product Code: SHELLYPLUS1
Latest application date: 2022-05-26

FCC ID Device Details

FCC ID2ALAY-SHELLYPLUS1
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ALAY
Product CodeSHELLYPLUS1
Applicant BusinessAllterco Robotics 🇧🇬
Related Domains myki.watch
Equipment ClassSmart switch
Test FirmShenzhen LCS Compliance Testing Laboratory Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2022-05-26
2402-2480 MHzOriginal Equipment2022-05-26

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2022-05-26PDF 5.5 MB
Internal PhotosInternal Photos2022-05-26PDF 868.2 KB
External PhotosExternal Photos2022-05-26PDF 965.5 KB
Label and LocationID Label/Location Info2022-05-26PDF 411.3 KB
Test Setup PhotosTest Setup Photos2022-05-26PDF 469.4 KB
2.4G WLAN test reportTest Report2022-05-26PDF 1.8 MB
Appendix A Test Data for BT_FCC ID_part 1Test Report2022-05-26PDF 4.6 MB
Appendix A Test Data for BT_FCC ID_part 2Test Report2022-05-26PDF 4.6 MB
Appendix B Test Data for BT LE_FCC IDTest Report2022-05-26PDF 3.7 MB
Appendix C Test Data for 2.4GWIFI FCC ID_part 1Test Report2022-05-26PDF 4.7 MB
Appendix C Test Data for 2.4GWIFI FCC ID_part 2Test Report2022-05-26PDF 4.1 MB
BT LE test reportTest Report2022-05-26PDF 1.8 MB
BT test reportTest Report2022-05-26PDF 1.5 MB
FCC Confidentiality request letterCover Letter(s)2022-05-26PDF 138.7 KB
FCC Declaration of Disable WLAN Channel 12 and 13Cover Letter(s)2022-05-26PDF 100.6 KB
FCC POACover Letter(s)2022-05-26PDF 108.9 KB
RF Exposure-MPERF Exposure Info2022-05-26PDF 352.1 KB
block diagram Metadata onlyBlock DiagramPDF 80.2 KB
schematic Metadata onlySchematicsPDF 39.8 KB
Declaration concerning Antenna Specification Metadata onlyOperational DescriptionPDF 112.4 KB
Operation Description Metadata onlyOperational DescriptionPDF 89.8 KB

Application Information

Application IDXuor8i2uEg5MS2lIw2G1kg==
Final Action Date2022-05-26
Application PurposeOriginal Equipment
Applicant FRN0026291955
ModelSHELLYPLUS1
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionSmart switch
Responsible PartyDimitar Dimitrov, CEO, support@myki.watch , +359 2 957 1247
Test FirmGavin Liang, Shenzhen LCS Compliance Testing Laboratory Ltd., gavin.liang@lcs-cert.com , 0755-82591330
TCB Emailjoergkusig@eurofins.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
Xuor8i2uEg5MS2lIw2G1kg==2022-05-26Original Equipment
HEcpuWqHnawmC2Bw3zwaHg==2022-05-26Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.001615C
2402-2480 MHz0.003000015C
2412-2462 MHz0.028715C
2422-2452 MHz0.01415C

Grants

TCB Grant - Application Xuor8i2uEg5MS2lIw2G1kg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 05/26/2022

Application Dated: 05/26/2022
Allterco Robotics
103 Cherni Vrah Blvd,
Sofia, 1407
Bulgaria
 
Attention: Dimitar Dimitrov , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALAY-SHELLYPLUS1
Name of Grantee:  Allterco Robotics
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart switch
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.003  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application Xuor8i2uEg5MS2lIw2G1kg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Allterco Robotics
103 Cherni Vrah Blvd,
Sofia, 1407
Bulgaria
  Date of Grant: 05/26/2022

Application Dated: 05/26/2022
 
Attention: Dimitar Dimitrov , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALAY-SHELLYPLUS1
Name of Grantee:  Allterco Robotics
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart switch
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.003  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



TCB Grant - Application HEcpuWqHnawmC2Bw3zwaHg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 05/26/2022

Application Dated: 05/26/2022
Allterco Robotics
103 Cherni Vrah Blvd,
Sofia, 1407
Bulgaria
 
Attention: Dimitar Dimitrov , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALAY-SHELLYPLUS1
Name of Grantee:  Allterco Robotics
Equipment Class: Digital Transmission System
Notes: Smart switch
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0016  
15C 2412.0  -  2462.0 0.0287  
15C 2422.0  -  2452.0 0.014  

Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application HEcpuWqHnawmC2Bw3zwaHg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Allterco Robotics
103 Cherni Vrah Blvd,
Sofia, 1407
Bulgaria
  Date of Grant: 05/26/2022

Application Dated: 05/26/2022
 
Attention: Dimitar Dimitrov , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALAY-SHELLYPLUS1
Name of Grantee:  Allterco Robotics
Equipment Class: Digital Transmission System
Notes: Smart switch
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0016  
15C 2412.0  -  2462.0 0.0287  
15C 2422.0  -  2452.0 0.014  

Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



Mail To: