FCC ID 2ALEPT0006623

LoRaWAN IoT AC Outlet for indoor use

by TEKTELIC Communications Incorporated

Grantee Code: 2ALEP   Product Code: T0006623
Latest application date: 2020-05-08

FCC ID Device Details

FCC ID2ALEPT0006623
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ALEP
Product CodeT0006623
Applicant BusinessTEKTELIC Communications Incorporated 🇨🇦
Related Domains tektelic.com
Equipment ClassLoRaWAN IoT AC Outlet for indoor use
Test FirmElectronic Test Centre-Airdrie (MPB Technologies)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.3-914.9 MHzOriginal Equipment2020-05-08
903-914.9 MHzOriginal Equipment2020-05-08

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2020-05-08PDF 482.7 KB
Internal PhotosInternal Photos2020-05-08PDF 1.3 MB
External PhotosExternal Photos2020-05-08PDF 154.8 KB
Label InfoID Label/Location Info2020-05-08PDF 129.8 KB
Test Setup PhotosTest Setup Photos2020-05-08PDF 679.8 KB
MPE Test ReportRF Exposure Info2020-05-08PDF 99.8 KB
Test Report DSSTest Report2020-05-08PDF 1.8 MB
Test Report DTSTest Report2020-05-08PDF 1.5 MB
Confidential Request Letter Metadata onlyCover Letter(s)2020-05-08PDF 77.8 KB
Confidentiality LetterCover Letter(s)2020-05-08PDF 77.8 KB
POA LetterCover Letter(s)2020-05-08PDF 83.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 116.6 KB
Schematics Metadata onlySchematicsPDF 290.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 1.4 MB
Parts List Metadata onlyParts List/Tune Up InfoPDF 226.6 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 560.6 KB

Application Information

Application IDvyPw/RdxiexbvaMmbX4DjA==
Final Action Date2020-05-08
Application PurposeOriginal Equipment
Applicant FRN0026333831
ModelT0006623
Frequency Range902.3-914.9 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionLoRaWAN IoT AC Outlet for indoor use
Responsible PartyTom Danshin, Senior System Engineer, tdanshin@tektelic.com , 14033386915
Test FirmMarc Rousseau, Electronic Test Centre-Airdrie (MPB Technologies), marc.rousseau@mpbc.ca , 403-912-0037
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. Device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
vyPw/RdxiexbvaMmbX4DjA==2020-05-08Original Equipment
6+FC3oF6oRVeArKByDFllw==2020-05-08Original Equipment

Equipment Authorization

FrequencyOutputRules
902.3-914.9 MHz0.112000015C
903-914.9 MHz0.111000015C

Grants

TCB Grant - Application vyPw/RdxiexbvaMmbX4DjA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 05/08/2020

Application Dated: 05/08/2020
TEKTELIC Communications Incorporated
7657 10th Street NE
Calgary, Alberta, T2E 8X2
Canada
 
Attention: Tom Danshin , Senior System Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALEPT0006623
Name of Grantee:  TEKTELIC Communications Incorporated
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: LoRaWAN IoT AC Outlet for indoor use
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.3  -  914.9 0.112  

Power listed is conducted. Device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application vyPw/RdxiexbvaMmbX4DjA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TEKTELIC Communications Incorporated
7657 10th Street NE
Calgary, Alberta, T2E 8X2
Canada
  Date of Grant: 05/08/2020

Application Dated: 05/08/2020
 
Attention: Tom Danshin , Senior System Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALEPT0006623
Name of Grantee:  TEKTELIC Communications Incorporated
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: LoRaWAN IoT AC Outlet for indoor use
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.3  -  914.9 0.112  

Power listed is conducted. Device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application 6+FC3oF6oRVeArKByDFllw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 05/08/2020

Application Dated: 05/08/2020
TEKTELIC Communications Incorporated
7657 10th Street NE
Calgary, Alberta, T2E 8X2
Canada
 
Attention: Tom Danshin , Senior System Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALEPT0006623
Name of Grantee:  TEKTELIC Communications Incorporated
Equipment Class: Digital Transmission System
Notes: LoRaWAN IoT AC Outlet for indoor use
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 903.0  -  914.9 0.111  

Power listed is conducted. Device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 6+FC3oF6oRVeArKByDFllw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TEKTELIC Communications Incorporated
7657 10th Street NE
Calgary, Alberta, T2E 8X2
Canada
  Date of Grant: 05/08/2020

Application Dated: 05/08/2020
 
Attention: Tom Danshin , Senior System Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALEPT0006623
Name of Grantee:  TEKTELIC Communications Incorporated
Equipment Class: Digital Transmission System
Notes: LoRaWAN IoT AC Outlet for indoor use
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 903.0  -  914.9 0.111  

Power listed is conducted. Device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: