FCC ID 2ALEPT0007525
SRS is LoRa multi sensor for IoT applications
by TEKTELIC Communications Incorporated
Grantee Code: 2ALEP Product Code: T0007525
Latest application date: 2021-08-24
FCC ID Device Details
| FCC ID | 2ALEPT0007525 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ALEP |
| Product Code | T0007525 |
| Applicant Business | TEKTELIC Communications Incorporated 🇨🇦 |
| Related Domains |  tektelic.com |
| Equipment Class | SRS is LoRa multi sensor for IoT applications |
| Test Firm | Electronic Test Centre-Airdrie (MPB Technologies) |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.3-914.9 MHz | Original Equipment | 2021-08-24 |
| 903-914.9 MHz | Original Equipment | 2021-08-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2021-08-24 | PDF 443.8 KB |
| Internal Photos | Internal Photos | 2021-08-24 | PDF 1.7 MB |
| External Photos | External Photos | 2021-08-24 | PDF 1.3 MB |
| Label & Location | ID Label/Location Info | 2021-08-24 | PDF 235.9 KB |
| Label and Location | ID Label/Location Info | 2021-08-24 | PDF 235.9 KB |
| Test Setup Photos | Test Setup Photos | 2021-08-24 | PDF 1.4 MB |
| Test Reort DTS | Test Report | 2021-08-24 | PDF 1.4 MB |
| Test Report DSS | Test Report | 2021-08-24 | PDF 1.6 MB |
| Confidentiality Letter | Cover Letter(s) | 2021-08-24 | PDF 77.3 KB |
| LOA Letter | Cover Letter(s) | 2021-08-24 | PDF 83.9 KB |
| Product Family Cover Letter | Cover Letter(s) | 2021-08-24 | PDF 128.6 KB |
| RF Exposure | RF Exposure Info | 2021-08-24 | PDF 257.5 KB |
| Block Diagram Metadata only | Block Diagram | PDF 276.9 KB | |
| Schematics Metadata only | Schematics | PDF 769.9 KB | |
| Operational Description Metadata only | Operational Description | PDF 510 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 2.1 MB | |
| Tune Up Proceedure Metadata only | Parts List/Tune Up Info | PDF 213.4 KB |
Application Information
| Application ID | IaZ83/HKUqVK6D6ph6lHJA== |
|---|---|
| Final Action Date | 2021-08-24 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0026333831 |
| Model | T0007525 |
| Frequency Range | 902.3-914.9 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | SRS is LoRa multi sensor for IoT applications |
| Responsible Party | Tom Danshin, Senior System Engineer, tdanshin@tektelic.com , 14033386915 |
| Test Firm | Marc Rousseau, Electronic Test Centre-Airdrie (MPB Technologies), marc.rousseau@mpbc.ca  , 403-912-0037 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is the maximum conducted output power. The antennas used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| IaZ83/HKUqVK6D6ph6lHJA== | 2021-08-24 | Original Equipment |
| DyyyBSCc7JmkKcyK0isZCg== | 2021-08-24 | Original Equipment |
Grants
TCB Grant - Application IaZ83/HKUqVK6D6ph6lHJA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 08/24/2021 Application Dated: 08/24/2021 |
| TEKTELIC Communications Incorporated |
| 7657 10th Street NE |
| Calgary, Alberta, T2E 8X2 Canada |
| Attention: Tom Danshin , Senior System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALEPT0007525 |
| Name of Grantee: | TEKTELIC Communications Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SRS is LoRa multi sensor for IoT applications |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0244 |
| Output Power listed is the maximum conducted output power. The antennas used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application IaZ83/HKUqVK6D6ph6lHJA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TEKTELIC Communications Incorporated 7657 10th Street NE Calgary, Alberta, T2E 8X2 Canada |
Date of Grant: 08/24/2021 Application Dated: 08/24/2021 |
| Attention: Tom Danshin , Senior System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALEPT0007525 |
| Name of Grantee: | TEKTELIC Communications Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SRS is LoRa multi sensor for IoT applications |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0244 |
| Output Power listed is the maximum conducted output power. The antennas used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 08/24/2021 Application Dated: 08/24/2021 |
| TEKTELIC Communications Incorporated |
| 7657 10th Street NE |
| Calgary, Alberta, T2E 8X2 Canada |
| Attention: Tom Danshin , Senior System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALEPT0007525 |
| Name of Grantee: | TEKTELIC Communications Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | BLE Sensor Gen2 is end-device for IoT applications |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.0 - 914.9 | 0.0333 |
| Output Power listed is the maximum conducted output power. The antennas used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
EAS Grant - Application DyyyBSCc7JmkKcyK0isZCg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TEKTELIC Communications Incorporated 7657 10th Street NE Calgary, Alberta, T2E 8X2 Canada |
Date of Grant: 08/24/2021 Application Dated: 08/24/2021 |
| Attention: Tom Danshin , Senior System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALEPT0007525 |
| Name of Grantee: | TEKTELIC Communications Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | BLE Sensor Gen2 is end-device for IoT applications |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.0 - 914.9 | 0.0333 |
| Output Power listed is the maximum conducted output power. The antennas used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
| Mail To: |