FCC ID 2ALHY-PEPPERINT

Pepper C1 RFID Reader

by Eccel Technology Ltd

Grantee Code: 2ALHY   Product Code: PEPPERINT
Latest application date: 2023-09-08

FCC ID Device Details

FCC ID2ALHY-PEPPERINT
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ALHY
Product CodePEPPERINT
Applicant BusinessEccel Technology Ltd 🇬🇧
Related Domains eccel.co.uk
Equipment ClassPepper C1 RFID Reader
Test FirmShenzhen LCS Compliance Testing Laboratory Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
13.56 MHzOriginal Equipment2023-09-08
2412-2462 MHzOriginal Equipment2023-09-08
2402-2480 MHzOriginal Equipment2023-09-08

Exhibits

DocumentTypeAvailableFile
User Manual rev01Users Manual2023-09-08PDF 3.4 MB
Internal PhotosInternal Photos2024-03-07PDF 2.2 MB
External PhotosExternal Photos2023-09-08PDF 2 MB
Label and LocationID Label/Location Info2023-09-08PDF 334.4 KB
Test Setup PhotosTest Setup Photos2023-09-08PDF 481.4 KB
Test Setup Photos_NFCTest Setup Photos2023-09-08PDF 489.6 KB
2.4G WLAN test reportTest Report2023-09-08PDF 1.3 MB
Antenna description_NFCTest Report2023-09-08PDF 275.3 KB
Antenna specification_BT WIFITest Report2023-09-08PDF 1.6 MB
Appendix A Test Data for BT FCC IDTest Report2023-09-08PDF 3.3 MB
Appendix B Test Data for BT LE FCC IDTest Report2023-09-08PDF 1.2 MB
Appendix C Test Data for 2.4GWIFI FCC IDTest Report2023-09-08PDF 3.6 MB
BT LE test reportTest Report2023-09-08PDF 1.3 MB
BT test reportTest Report2023-09-08PDF 1.4 MB
NFC test reportTest Report2023-09-08PDF 1.4 MB
Covered Equipment Attestation_2.911(d)(5)(i) and (ii)Attestation Statements2023-09-08PDF 105.2 KB
US_Agent_2.911(d)(7)Attestation Statements2023-09-08PDF 207.4 KB
FCC Confidentiality request letterCover Letter(s)2023-09-08PDF 114.3 KB
FCC Declaration of Disable WLAN Channel 12 and 13Cover Letter(s)2023-09-08PDF 174.3 KB
FCC POACover Letter(s)2023-09-08PDF 159.9 KB
Request for Single Modular Transmitter ApprovalCover Letter(s)2023-09-08PDF 85.9 KB
RF Exposure Evaluation-FCCRF Exposure Info2023-09-08PDF 368.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 1.7 MB
schematic_ RS232 Metadata onlySchematicsPDF 1.2 MB
schematic_RS485 Metadata onlySchematicsPDF 1.2 MB
schematic_UART Metadata onlySchematicsPDF 1.2 MB
schematic_USB Metadata onlySchematicsPDF 1.2 MB
Operation of Description Metadata onlyOperational DescriptionPDF 746.4 KB
BOM_ RS232 Metadata onlyParts List/Tune Up InfoPDF 1.1 MB
BOM_RS485 Metadata onlyParts List/Tune Up InfoPDF 1.1 MB
BOM_UART Metadata onlyParts List/Tune Up InfoPDF 1.1 MB
BOM_USB Metadata onlyParts List/Tune Up InfoPDF 1.1 MB

Application Information

Application IDjoq7p50YLDj8MQHoQSr/QQ==
Final Action Date2023-09-08
Application PurposeOriginal Equipment
Applicant FRN0026350066
ModelPEPPERINT
Frequency Range13.56 MHz
Equipment ClassDXX - Part 15 Low Power Communication Device Transmitter
Device DescriptionPepper C1 RFID Reader
Responsible PartyDarren John Turner, Mr, darren.turner@eccel.co.uk , +44 129 682 1358
Test FirmGavin Liang, Shenzhen LCS Compliance Testing Laboratory Ltd., gavin.liang@lcs-cert.com , 0755-82591330
TCB Emailjoergkusig@eurofins.com
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityYes
Short-Term Confidentiality Date03/07/2024
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval, The maximum antenna gain is 0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Applications

Application IDDatePurpose
joq7p50YLDj8MQHoQSr/QQ==2023-09-08Original Equipment
SAR2/PhGDvOAL602yfFFBQ==2023-09-08Original Equipment
GFQosavtdfuuoc3rRV0AlQ==2023-09-08Original Equipment

Equipment Authorization

FrequencyOutputRules
13.56 MHz15C
2402-2480 MHz0.000900015C
2402-2480 MHz0.002415C
2412-2462 MHz0.047315C

Grants

TCB Grant - Application SAR2/PhGDvOAL602yfFFBQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 09/08/2023

Application Dated: 09/08/2023
Eccel Technology Ltd
Unit 16b Fir Tree Lane
Groby
Leicester, LE6 0FH
United Kingdom
 
Attention: Darren Turner , Mr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALHY-PEPPERINT
Name of Grantee:  Eccel Technology Ltd
Equipment Class: Digital Transmission System
Notes: Pepper C1 RFID Reader
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0024  
15C 2412.0  -  2462.0 0.0473  

Single Modular Approval, Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is -13.43dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

EAS Grant - Application SAR2/PhGDvOAL602yfFFBQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Eccel Technology Ltd
Unit 16b Fir Tree Lane Groby
Leicester, LE6 0FH
United Kingdom
  Date of Grant: 09/08/2023

Application Dated: 09/08/2023
 
Attention: Darren Turner , Mr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALHY-PEPPERINT
Name of Grantee:  Eccel Technology Ltd
Equipment Class: Digital Transmission System
Notes: Pepper C1 RFID Reader
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0024  
15C 2412.0  -  2462.0 0.0473  

Single Modular Approval, Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is -13.43dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.



TCB Grant - Application joq7p50YLDj8MQHoQSr/QQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 09/08/2023

Application Dated: 09/08/2023
Eccel Technology Ltd
Unit 16b Fir Tree Lane
Groby
Leicester, LE6 0FH
United Kingdom
 
Attention: Darren Turner , Mr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALHY-PEPPERINT
Name of Grantee:  Eccel Technology Ltd
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Pepper C1 RFID Reader
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 13.56  -  13.56  

Single Modular Approval, The maximum antenna gain is 0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

EAS Grant - Application joq7p50YLDj8MQHoQSr/QQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Eccel Technology Ltd
Unit 16b Fir Tree Lane Groby
Leicester, LE6 0FH
United Kingdom
  Date of Grant: 09/08/2023

Application Dated: 09/08/2023
 
Attention: Darren Turner , Mr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALHY-PEPPERINT
Name of Grantee:  Eccel Technology Ltd
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Pepper C1 RFID Reader
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 13.56  -  13.56  

Single Modular Approval, The maximum antenna gain is 0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.



TCB Grant - Application GFQosavtdfuuoc3rRV0AlQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 09/08/2023

Application Dated: 09/08/2023
Eccel Technology Ltd
Unit 16b Fir Tree Lane
Groby
Leicester, LE6 0FH
United Kingdom
 
Attention: Darren Turner , Mr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALHY-PEPPERINT
Name of Grantee:  Eccel Technology Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Pepper C1 RFID Reader
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0009  

Single Modular Approval, Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is -13.43dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

EAS Grant - Application GFQosavtdfuuoc3rRV0AlQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Eccel Technology Ltd
Unit 16b Fir Tree Lane Groby
Leicester, LE6 0FH
United Kingdom
  Date of Grant: 09/08/2023

Application Dated: 09/08/2023
 
Attention: Darren Turner , Mr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALHY-PEPPERINT
Name of Grantee:  Eccel Technology Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Pepper C1 RFID Reader
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0009  

Single Modular Approval, Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is -13.43dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.



Mail To: