WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc

Beijing wanglianzhiyuan Tech Inc MT7697module

Page 1 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 2 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 3 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 4 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 5 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 6 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 7 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 8 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 9 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 10 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 11 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 12 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 13 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 14 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 15 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 16 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 17 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 18 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 19 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 20 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 21 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 22 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 23 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 24 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 25 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 26 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 27 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 28 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 29 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 30 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 31 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 32 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 33 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 34 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 35 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 36 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 37 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 38 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 39 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 40 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 41 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 42 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 43 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 44 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 45 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 46 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 47 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 48 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 49 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 50 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 51 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 52 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 53 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 54 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 55 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 56 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 57 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 58 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Page 59 of WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc

RADIO TEST REPORT
FCC ID: 2ALR4-WRTNODE7
Product: MT7697module
Trade Mark: N/A
Model No.:
Serial Model:
Report No.:
Issue Date:
wrtnode^7
N/A
NTEK-2017NT04102559F1
18 Apr. 2017
Prepared for
Beijing wanglianzhiyuan Tech Inc
37-01 Zhonghaiwaerdenghu, 18 Dingsi Rd, Changping Dist, Beijing, China
Prepared by
Shenzhen NTEK Testing Technology Co., Ltd.
1/F, Building E, Fenda Science Park, Sanwei Community,
Xixiang Street Bao’an District, Shenzhen 518126 P.R. China
Tel.: +86-755-6115 6588
Fax.: +86-755-6115 6599
Website:http://www.ntek.org.cn
Page 2 of 59
Report No.:NTEK-2017NT04102559F1
TABLE OF CONTENTS
TEST RESULT CERTIFICATION ...................................................................................................................... 3
SUMMARY OF TEST RESULTS ......................................................................................................................... 4
FACILITIES AND ACCREDITATIONS ............................................................................................................. 5
3.1
3.2
3.3
FACILITIES..................................................................................................................................................... 5
LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5
MEASUREMENT UNCERTAINTY ............................................................................................................... 5
GENERAL DESCRIPTION OF EUT .................................................................................................................. 6
DESCRIPTION OF TEST MODES ..................................................................................................................... 9
SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10
6.1
6.2
6.3
BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 10
SUPPORT EQUIPMENT............................................................................................................................... 11
EQUIPMENTS LIST FOR ALL TEST ITEMS.............................................................................................. 12
TEST REQUIREMENTS .................................................................................................................................... 14
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
7.10
CONDUCTED EMISSIONS TEST ............................................................................................................... 14
RADIATED SPURIOUS EMISSION ............................................................................................................ 19
NUMBER OF HOPPING CHANNEL ........................................................................................................... 33
HOPPING CHANNEL SEPARATION MEASUREMENT ........................................................................... 35
AVERAGE TIME OF OCCUPANCY (DWELL TIME) ................................................................................ 39
20DB BANDWIDTH TEST .......................................................................................................................... 43
PEAK OUTPUT POWER .............................................................................................................................. 47
CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 51
SPURIOUS RF CONDUCTED EMISSION .................................................................................................. 55
ANTENNA APPLICATION .......................................................................................................................... 59
N2016.11.05.1105.V.1.0
Page 3 of 59
Report No.:NTEK-2017NT04102559F1
TEST RESULT CERTIFICATION
Applicant’s name ......................... : Beijing wanglianzhiyuan Tech Inc
Address ....................................... : 37-01 Zhonghaiwaerdenghu, 18 Dingsi Rd, Changping Dist, Beijing,
China
Manufacturer's Name .................. : Beijing wanglianzhiyuan Tech Inc
Address ....................................... : 37-01 Zhonghaiwaerdenghu, 18 Dingsi Rd, Changping Dist, Beijing,
China
Product description
Product name .............................. : MT7697module
Model and/or type reference ..... : wrtnode^7
Serial Model ................................ : N/A
Measurement Procedure Used:
APPLICABLE STANDARDS
STANDARD/ TEST PROCEDURE
TEST RESULT
FCC 47 CFR Part 2, Subpart J:2016
FCC 47 CFR Part 15, Subpart C:2016
KDB 174176 D01 Line Conducted FAQ v01r01
ANSI C63.10-2013
Complied
This device described above has been tested by Shenzhen NTEK Testing Technology Co., Ltd., and the test
results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is
applicable only to the tested sample identified in the report.
This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK Testing
Technology Co., Ltd., this document may be altered or revised by Shenzhen NTEK Testing Technology Co.,
Ltd., personnel only, and shall be noted in the revision of the document.
The test results of this report relate only to the tested sample identified in this report.
Date of Test
Testing Engineer
10 Apr. 2017 ~ 18 Apr. 2017
(Eileen Liu)
Technical Manager
(Jason Chen)
Authorized Signatory
(Sam Chen)
N2016.11.05.1105.V.1.0
Page 4 of 59
Report No.:NTEK-2017NT04102559F1
SUMMARY OF TEST RESULTS
FCC Part15 (15.247), Subpart C
Standard Section
Test Item
Verdict
15.207
Conducted Emission
PASS
15.247(c)
Radiated Spurious Emission
PASS
15.247(a)(1)
Hopping Channel Separation
PASS
15.247(b)(1)
Peak Output Power
PASS
15.247(a)(iii)
Number of Hopping Frequency
PASS
15.247(a)(iii)
Dwell Time
PASS
15.247(a)(1)
Bandwidth
PASS
15.205
Band Edge Emission
PASS
15.203
Antenna Requirement
PASS
Remark
Remark:
1. “N/A” denotes test is not applicable in this Test Report.
2. All test items were verified and recorded according to the standards and without any deviation during
the test.
N2016.11.05.1105.V.1.0
Page 5 of 59
Report No.:NTEK-2017NT04102559F1
FACILITIES AND ACCREDITATIONS
3.1 FACILITIES
All measurement facilities used to collect the measurement data are located at
1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen
518126 P.R. China
The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.10 and CISPR
Publication 22.
3.2 LABORATORY ACCREDITATIONS AND LISTINGS
Site Description
EMC Lab.
: Accredited by CNAS, 2014.09.04
The Laboratory has been assessed and proved to be in compliance with
CNAS-CL01:2006 (identical to ISO/IEC 17025:2005)
The Certificate Registration Number is L5516.
Accredited by FCC, September 6, 2013
The Certificate Registration Number is 238937.
Accredited by Industry Canada, August 29, 2012
The Certificate Registration Number is 9270A-1.
Name of Firm
Site Location
Shenzhen NTEK Testing Technology Co., Ltd.
1/F, Building E, Fenda Science Park, Sanwei Community,
Xixiang Street Bao’an District, Shenzhen 518126 P.R. China
3.3 MEASUREMENT UNCERTAINTY
The reported uncertainty of measurement y±U, where expended uncertainty U is based on a standard
uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %.
No.
Item
Uncertainty
Conducted Emission Test
±2.80dB
RF power, conducted
±0.16dB
Spurious emissions, conducted
±0.21dB
All emissions, radiated(30MHz~1GHz)
±2.64dB
All emissions, radiated(1GHz~6GHz)
±2.40dB
All emissions, radiated(>6GHz)
±2.52dB
Temperature
±0.5°C
Humidity
±2%
N2016.11.05.1105.V.1.0
Page 6 of 59
Report No.:NTEK-2017NT04102559F1
GENERAL DESCRIPTION OF EUT
Product Feature and Specification
Equipment
MT7697module
Trade Mark
N/A
FCC ID
2ALR4-WRTNODE7
Model No.
wrtnode^7
Serial Model
N/A
Model Difference
N/A
Operating Frequency
2402MHz~2480MHz
Modulation
GFSK,π/4-DQPSK, 8DPSK
Bluetooth Version
BT V4.0(EDR+BLE)
Number of Channels
79 Channels
Antenna Type
The EUT has two types of antenna(Note2):
Antenna 1 is FPCB Antenna
Antenna 2 is Ceramic Antenna
Antenna Gain
Antenna 1:4.5 dBi;
Antenna 2: 0.5 dBi
Rating(s)
DC 3.3V
DC supply:
Power supply
Adapter supply:
HW Version
V1.8
SW Version
V4.2.0
Note: Based on the application, features, or specification exhibited in User's Manual, the EUT is considered
as an ITE/Computing Device. More details of EUT technical specification, please refer to the User's Manual.
N2016.11.05.1105.V.1.0
Page 7 of 59
Report No.:NTEK-2017NT04102559F1
Note2:
This is FPCB antenna(ANT 1)
This is Ceramic antenna(ANT 2)
N2016.11.05.1105.V.1.0
Page 8 of 59
Report No.:NTEK-2017NT04102559F1
Revision History
Report No.
Version
Description
Issued Date
NTEK-2017NT04102559F1
Rev.01
Initial issue of report
Apr 18, 2017
N2016.11.05.1105.V.1.0
Page 9 of 59
Report No.:NTEK-2017NT04102559F1
DESCRIPTION OF TEST MODES
To investigate the maximum EMI emission characteristics generates from EUT, the test system was
pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode
which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration
mode(s) mentioned above was evaluated respectively.
The Transmitter was operated in the normal operating mode. The TX frequency was fixed which was for the
purpose of the measurements.
Test of channel included the lowest and middle and highest frequency to perform the test, then record on this
report.
Those data rates (1Mbps for GFSK modulation; 2Mbps for π/4-DQPSK modulation; 3Mbps for 8DPSK
modulation) were used for all test.
The EUT was pretested with 3 orientations placed on the table for the radiated emission measurement –X, Y,
and Z-plane. The X-plane results were found as the worst case and were shown in this report.
Carrier Frequency and Channel list:
Channel
Frequency(MHz)
2402
2403
…
…
39
2441
40
2442
…
…
77
2479
78
2480
Note: fc=2402MHz+k×1MHz k=0 to 78
The following summary table is showing all test modes to demonstrate in compliance with the standard.
For AC Conducted Emission
Final Test Mode
Description
Mode 1
normal link mode
Note: AC power line Conducted Emission was tested under maximum output power.
For Radiated Test Cases
Final Test Mode
Description
Mode 1
normal link mode
Mode 2
CH00(2402MHz)
Mode 3
CH39(2441MHz)
Mode 4
CH78(2480MHz)
Note: For radiated test cases, the worst mode data rate 1Mbps was reported only, because this data rate
has the highest RF output power at preliminary tests, and no other significantly frequencies found in
conducted spurious emission.
For Conducted Test Cases
Final Test Mode
Description
Mode 2
CH00(2402MHz)
Mode 3
CH39(2441MHz)
Mode 4
CH78(2480MHz)
Mode 5
Hopping mode
Note: The engineering test program was provided and the EUT was programmed to be in continuously
transmitting mode.
N2016.11.05.1105.V.1.0
Page 10 of 59
Report No.:NTEK-2017NT04102559F1
SETUP OF EQUIPMENT UNDER TEST
6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM
For AC Conducted Emission Mode
E-1
EUT
C-1
AC PLUG
E-2
Notebook
For Radiated Test Cases
E-1
EUT
C-1
AC PLUG
E-2
Notebook
For Conducted Test Cases
C2
Measurement
Instrument
C1
E-1
EUT
E-2
Notebook
Note:The temporary antenna connector is soldered on the PCB board in order to perform conducted tests and
this temporary antenna connector is listed in the equipment list.
N2016.11.05.1105.V.1.0
Page 11 of 59
Report No.:NTEK-2017NT04102559F1
6.2 SUPPORT EQUIPMENT
The EUT has been tested as an independent unit together with other necessary accessories or support units.
The following support units or accessories were used to form a representative test configuration during the
tests.
Item
Equipment
Mfr/Brand
Model/Type No.
FCC ID
Note
E-1
MT7697module
N/A
wrtnode^7
2ALR4-WRTNODE7
EUT
E-2
Notebook
Lenovo
ThinkPad Edge E430
Peripherals
N/A
Item
Cable Type
Shielded Type
Ferrite Core
Length
C-1
USB Cable
NO
NO
1.2m
C-2
RF Cable
NO
NO
0.5m
Notes:
(1)
(2)
(3)
The support equipment was authorized by Declaration of Confirmation.
For detachable type I/O cable should be specified the length in cm in『Length』column.
“YES” is means “shielded” “with core”; “NO” is means “unshielded” “without core”.
N2016.11.05.1105.V.1.0
Page 12 of 59
Report No.:NTEK-2017NT04102559F1
6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS
Radiation Test equipment
Kind of
Item
Manufacturer
Equipment
Spectrum
Agilent
Analyzer
Spectrum
Agilent
Analyzer
Last
calibration
Calibrated
until
Calibration
period
E4407B
MY45108040 2016.07.06
2017.07.05
1 year
N9020A
MY49100060 2016.11.19
Type No.
Serial No.
2017.11.18
1 year
Test Receiver
R&S
ESPI
101318
2016.06.07
2017.06.06
1 year
Bilog Antenna
TESEQ
CBL6111D
31216
2016.07.06
2017.07.05
1 year
50Ω Coaxial
Switch
Anritsu
MP59B
6200264416
2016.06.07
2017.06.06
1 year
Horn Antenna
EM
EM-AH-1018
2011071402
2016.07.06
2017.07.05
1 year
Horn Ant
Schwarzbeck BBHA 9170
9170-181
2016.07.06
2017.07.05
1 year
980246
2016.08.09
2017.08.09
1 year
Pre-Amplifier
EMC
EMC051835
SE
10
Loop Antenna
ARA
PLA-1030/B
1029
2016.06.08
2017.06.07
1 year
N/A
R-04
N/A
2016.06.06
2017.06.05
1 year
N/A
R-01
N/A
2016.07.06
2017.07.05
1 year
N/A
R-02
N/A
2016.07.06
2017.07.05
1 year
N/A
R-03
N/A
2016.06.06
2017.06.05
1 year
NTS
R001
N/A
N/A
N/A
N/A
11
12
13
14
15
Test Cable
(9KHz-30MHz)
Test Cable
(30MHz-1GHz)
Test Cable
(1-18GHz)
High Test
Cable(18G-40
GHz)
temporary
antenna
connector
(Note)
Note:
We will use the temporary antenna connector (soldered on the PCB board) When conducted test
And this temporary antenna connector is listed within the instrument list
N2016.11.05.1105.V.1.0
Page 13 of 59
Conduction Test equipment
Kind of
Item
Manufacturer
Equipment
Report No.:NTEK-2017NT04102559F1
Type No.
Serial No.
Last
calibration
Calibrated
until
Calibration
period
Test Receiver
R&S
ESCI
101160
2016.06.06
2017.06.05
1 year
LISN
R&S
ENV216
101313
2016.08.24
2017.08.23
1 year
LISN
EMCO
3816/2
00042990
2016.08.24
2017.08.23
1 year
Anritsu
MP59B
6200264417
2016.06.07
2017.06.06
1 year
N/A
C01
N/A
2016.06.08
2017.06.07
1 year
N/A
C02
N/A
2016.06.08
2017.06.07
1 year
N/A
C03
N/A
2016.06.08
2017.06.07
1 year
50Ω Coaxial
Switch
Test Cable
(9KHz-30MH
z)
Test Cable
(9KHz-30MH
z)
Test Cable
(9KHz-30MH
z)
Note: Each piece of equipment is scheduled for calibration once a year.
N2016.11.05.1105.V.1.0
Page 14 of 59
Report No.:NTEK-2017NT04102559F1
TEST REQUIREMENTS
7.1 CONDUCTED EMISSIONS TEST
7.1.1
Applicable Standard
According to FCC Part 15.207(a) and KDB 174176 D01 Line Conducted FAQ v01r01
7.1.2
Conformance Limit
Conducted Emission Limit
Quasi-peak
Average
0.15-0.5
66-56*
56-46*
0.5-5.0
56
46
5.0-30.0
60
50
Note: 1. *Decreases with the logarithm of the frequency
2. The lower limit shall apply at the transition frequencies
3. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz.
Frequency(MHz)
7.1.3
Test Configuration
Reference
Ground
EMI Receiver
EUT
Auxiliary
Equipment
80cm
Reference
Ground
50Ω
80cm
LISN
7.1.4
LISN
Test Procedure
According to the requirements in Section 13.1.4.1 of ANSI C63.10-2013 Conducted emissions the EUT
measured in the frequency range between 0.15 MHz and 30 MHz using CISPR Quasi-Peak and average
detector mode.
1. The EUT was placed 0.4 meter from the conducting wall of the shielding room.
2. The EUT was placed on a table which is 0.8m above ground plane.
3. Connect EUT to the power mains through a line impedance stabilization network (LISN). All other
support equipments powered from additional LISN(s). The LISN provide 50 Ohm/ 50uH of coupling
impedance for the measuring instrument.
4. Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back and forth in
the center forming a bundle 30 to 40cm long.
5. I/O cables that are not connected to a peripheral shall be bundled in the center. The end of the cable
may be terminated, if required, using the correct terminating impedance. The overall length shall not
exceed 1 m.
6. LISN at least 80 cm from nearest part of EUT chassis.
7. The frequency range from 150KHz to 30MHz was searched.
8. Set the test-receiver system to Peak Detect Function and specified bandwidth(IF bandwidth=9KHz) with
Maximum Hold Mode
9. For the actual test configuration, please refer to the related Item –EUT Test Photos.
7.1.5
Test Results
Pass
N2016.11.05.1105.V.1.0
Page 15 of 59
7.1.6
Report No.:NTEK-2017NT04102559F1
Test Results
EUT:
MT7697module
Temperature:26 ℃
Pressure:
1010hPa
Test Voltage : DC 5V from Adapter AC 120V/60Hz
Frequency
Reading Level Correct Factor
wrtnode^7
Model Name :
Relative Humidity:54%
Phase :
Test Mode:
Measure-ment
Mode 1
Limits
Margin
Remark
(MHz)
(dBμV)
(dB)
(dBμV)
(dBμV)
(dB)
0.1700
26.53
10.13
36.66
64.96
-28.30
QP
0.1700
7.15
10.13
17.28
54.96
-37.68
AVG
0.5299
24.75
10.17
34.92
56.00
-21.08
QP
0.5299
11.56
10.17
21.73
46.00
-24.27
AVG
0.5939
24.91
10.19
35.10
56.00
-20.90
QP
0.5939
13.81
10.19
24.00
46.00
-22.00
AVG
0.8619
22.67
10.24
32.91
56.00
-23.09
QP
0.8619
10.92
10.24
21.16
46.00
-24.84
AVG
4.1258
22.61
10.22
32.83
56.00
-23.17
QP
4.1258
8.53
10.22
18.75
46.00
-27.25
AVG
Remark:
1. All readings are Quasi-Peak and Average values.
2. Factor = Insertion Loss + Cable Loss.
N2016.11.05.1105.V.1.0
Page 16 of 59
Report No.:NTEK-2017NT04102559F1
EUT:
Temperature:
MT7697module
26 ℃
Model Name :
Relative Humidity:
wrtnode^7
Pressure:
Test Voltage :
1010hPa
DC 5V from Adapter AC 120V/60Hz
Phase :
Test Mode:
Mode 1
Frequency
Reading Level Correct Factor
Measure-ment
54%
Limits
Margin
Remark
(MHz)
(dBμV)
(dB)
(dBμV)
(dBμV)
(dB)
0.1539
28.46
10.14
38.60
65.78
-27.18
QP
0.1539
10.40
10.14
20.54
55.78
-35.24
AVG
0.5140
24.46
10.16
34.62
56.00
-21.38
QP
0.5140
13.26
10.16
23.42
46.00
-22.58
AVG
0.5820
27.01
10.19
37.20
56.00
-18.80
QP
0.5820
15.34
10.19
25.53
46.00
-20.47
AVG
0.8620
25.88
10.24
36.12
56.00
-19.88
QP
0.8620
14.26
10.24
24.50
46.00
-21.50
AVG
5.3899
23.14
10.23
33.37
60.00
-26.63
QP
5.3899
8.65
10.23
18.88
50.00
-31.12
AVG
Remark:
1. All readings are Quasi-Peak and Average values.
2. Factor = Insertion Loss + Cable Loss.
N2016.11.05.1105.V.1.0
Page 17 of 59
Report No.:NTEK-2017NT04102559F1
EUT:
MT7697module
Temperature: 26 ℃
wrtnode^7
Model Name :
Relative Humidity:54%
Pressure:
1010hPa
Test Voltage : DC 5V from Adapter AC 240V/60Hz
Phase :
Test Mode:
Frequency
Reading Level Correct Factor
Measure-ment
Mode 1
Limits
Margin
Remark
(MHz)
(dBμV)
(dB)
(dBμV)
(dBμV)
(dB)
0.2179
27.22
10.13
37.35
62.89
-25.54
QP
0.2179
12.01
10.13
22.14
52.89
-30.75
AVG
0.4460
26.72
10.15
36.87
56.95
-20.08
QP
0.4460
12.58
10.15
22.73
46.95
-24.22
AVG
0.6139
29.53
10.17
39.70
56.00
-16.30
QP
0.6139
15.08
10.17
25.25
46.00
-20.75
AVG
0.9939
25.88
10.20
36.08
56.00
-19.92
QP
0.9939
14.38
10.20
24.58
46.00
-21.42
AVG
2.3060
24.26
10.18
34.44
56.00
-21.56
QP
2.3060
12.40
10.18
22.58
46.00
-23.42
AVG
Remark:
1. All readings are Quasi-Peak and Average values.
2. Factor = Insertion Loss + Cable Loss.
N2016.11.05.1105.V.1.0
Page 18 of 59
Report No.:NTEK-2017NT04102559F1
EUT:
Temperature:
MT7697module
26 ℃
wrtnode^7
Model Name :
Relative Humidity:54%
Pressure:
Test Voltage :
1010hPa
DC 5V from Adapter AC 240V/60Hz
Phase :
Test Mode:
Frequency
Reading Level Correct Factor
Measure-ment
Mode 1
Limits
Margin
Remark
(MHz)
(dBμV)
(dB)
(dBμV)
(dBμV)
(dB)
0.1900
25.29
10.12
35.41
64.03
-28.62
QP
0.1900
8.46
10.12
18.58
54.03
-35.45
AVG
0.4339
23.11
10.17
33.28
57.18
-23.90
QP
0.4339
13.05
10.17
23.22
47.18
-23.96
AVG
0.5299
26.94
10.17
37.11
56.00
-18.89
QP
0.5299
15.38
10.17
25.55
46.00
-20.45
AVG
0.5979
25.25
10.19
35.44
56.00
-20.56
QP
0.5979
16.80
10.19
26.99
46.00
-19.01
AVG
0.9220
24.45
10.24
34.69
56.00
-21.31
QP
0.9220
12.58
10.24
22.82
46.00
-23.18
AVG
Remark:
1. All readings are Quasi-Peak and Average values.
2. Factor = Insertion Loss + Cable Loss.
N2016.11.05.1105.V.1.0
Page 19 of 59
Report No.:NTEK-2017NT04102559F1
7.2 RADIATED SPURIOUS EMISSION
7.2.1
Applicable Standard
According to FCC Part 15.247(d) and 15.209 and ANSI C63.10-2013
7.2.2
Conformance Limit
According to FCC Part 15.247(d): radiated emissions which fall in the restricted bands, as defined in
§15.205(a), must also comply with the radiated emission limits specified in §15.209(a) (see §15.205(c)).
According to FCC Part15.205, Restricted bands
MHz
MHz
MHz
GHz
0.090-0.110
16.42-16.423
399.9-410
4.5-5.15
10.495-0.505
16.69475-16.69525
608-614
5.35-5.46
2.1735-2.1905
16.80425-16.80475
960-1240
7.25-7.75
4.125-4.128
25.5-25.67
1300-1427
8.025-8.5
4.17725-4.17775
37.5-38.25
1435-1626.5
9.0-9.2
4.20725-4.20775
73-74.6
1645.5-1646.5
9.3-9.5
6.215-6.218
74.8-75.2
1660-1710
10.6-12.7
6.26775-6.26825
123-138
2200-2300
14.47-14.5
8.291-8.294
149.9-150.05
2310-2390
15.35-16.2
8.362-8.366
156.52475-156.52525
2483.5-2500
17.7-21.4
8.37625-8.38675
156.7-156.9
2690-2900
22.01-23.12
8.41425-8.41475
162.0125-167.17
3260-3267
23.6-24.0
12.29-12.293
167.72-173.2
3332-3339
31.2-31.8
12.51975-12.52025
240-285
3345.8-3358
36.43-36.5
12.57675-12.57725
322-335.4
3600-4400
(2)
13.36-13.41
20dBc in any 100 kHz bandwidth outside the operating frequency band. In case the emission fall within the
restricted band specified on 15.205(a), then the 15.209(a) limit in the table below has to be followed.
Restricted
Field Strength (μV/m)
Field Strength (dBμV/m) Measurement Distance
Frequency(MHz)
0.009~0.490
2400/F(KHz)
20 log (uV/m)
300
0.490~1.705
2400/F(KHz)
20 log (uV/m)
30
1.705~30.0
30
29.5
30
30-88
100
40
88-216
150
43.5
216-960
200
46
Above 960
500
54
Limits of Radiated Emission Measurement(Above 1000MHz)
Class B (dBuV/m) (at 3M)
Frequency(MHz)
Above 1000
PEAK
AVERAGE
74
54
Remark :1. Emission level in dBuV/m=20 log (uV/m)
2. Measurement was performed at an antenna to the closed point of EUT distance of meters.
3. Distance extrapolation factor =40log(Specific distance/ test distance)( dB);
Limit line=Specific limits(dBuV) + distance extrapolation factor.
N2016.11.05.1105.V.1.0
Page 20 of 59
7.2.3
Report No.:NTEK-2017NT04102559F1
Measuring Instruments
The Measuring equipment is listed in the section 6.3 of this test report.
7.2.4
Test Configuration
(a) For radiated emissions below 30MHz
Turntable
3m
EUT
0.8 m
Test
Receiver
1.0m
Ground Plane
Coaxial Cable
(b) For radiated emissions from 30MHz to 1000MHz
3m
Turntable
1m to 4m
EUT
Test
Receiver
0.8m
Ground Plane
Coaxial Cable
(c) For radiated emissions above 1000MHz
3m
4m
Turntable
EUT
1.5m
1.5m
Amplifie
Test Receiver
N2016.11.05.1105.V.1.0
Page 21 of 59
7.2.5
Report No.:NTEK-2017NT04102559F1
Test Procedure
The test site semi-anechoic chamber has met the requirement of NSA tolerance 4 dB according to the
standards: ANSI C63.10-2013. The test distance is 3m.The setup is according to the requirements in Section
13.1.4.1 of ANSI C63.10-2013 and CAN/CSA-CEI/IEC CISPR 22.
This test is required for any spurious emission that falls in a Restricted Band, as defined in Section 15.205.
It must be performed with the highest gain of each type of antenna proposed for use with the EUT.
Use the following spectrum analyzer settings:
Spectrum Parameter
Setting
Attenuation
Auto
Start Frequency
1000 MHz
Stop Frequency
10th carrier harmonic
RB / VB (emission in restricted band)
1 MHz / 1 MHz for Peak, 1 MHz / 10Hz for Average
Receiver Parameter
Attenuation
Start ~ Stop Frequency
Start ~ Stop Frequency
Start ~ Stop Frequency
Setting
Auto
9kHz~150kHz / RB 200Hz for QP
150kHz~30MHz / RB 9kHz for QP
30MHz~1000MHz / RB 120kHz for QP
a. The measuring distance of at 3 m shall be used for measurements at frequency up to 1GHz. For
frequencies above 1GHz, any suitable measuring distance may be used.
b. The EUT was placed on the top of a rotating table 0.8 m for below 1GHz and 1.5m for above 1GHz the
ground at a 3 meter. The table was rotated 360 degrees to determine the position of the highest
radiation.
c. The height of the equipment or of the substitution antenna shall be 0.8 m for below 1GHz and 1.5m for
above 1GHz; the height of the test antenna shall vary between 1 m to 4 m. Both horizontal and vertical
polarizations of the antenna are set to make the measurement.
d. For the radiated emission test above 1GHz:
Place the measurement antenna away from each area of the EUT determined to be a source of
emissions at the specified measurement distance, while keeping the measurement antenna aimed at
the source of emissions at each frequency of significant emissions, with polarization oriented for
maximum response. The measurement antenna may have to be higher or lower than the EUT,
depending on the radiation pattern of the emission and staying aimed at the emission source for
receiving the maximum signal. The final measurement antenna elevation shall be that which maximizes
the emissions. The measurement antenna elevation for maximum emissions shall be restricted to a
range of heights of from 1 m to 4 m above the ground or reference ground plane.
e. The initial step in collecting conducted emission data is a spectrum analyzer peak detector mode
pre-scanning the measurement frequency range. Significant peaks are then marked and then Quasi
Peak detector mode re-measured.
f. If the Peak Mode measured value compliance with and lower than Quasi Peak Mode Limit, the EUT
shall be deemed to meet QP Limits and then no additional QP Mode measurement performed.
g. For the actual test configuration, please refer to the related Item –EUT Test Photos.
Note:
Both horizontal and vertical antenna polarities were tested
and performed pretest to three orthogonal axis. The worst case emissions were reported
N2016.11.05.1105.V.1.0
Page 22 of 59
Report No.:NTEK-2017NT04102559F1
During the radiated emission test, the Spectrum Analyzer was set with the following configurations:
Frequency Band (MHz)
Function
Resolution bandwidth
Video Bandwidth
30 to 1000
QP
120 kHz
300 kHz
Peak
1 MHz
1 MHz
Average
1 MHz
10 Hz
Above 1000
Note: for the frequency ranges below 30 MHz, a narrower RBW is used for these ranges but the measured
value should add a RBW correction factor (RBWCF) where RBWCF [dB] =10*lg(100 [kHz]/narrower RBW
[kHz]). , the narrower RBW is 1 kHz and RBWCF is 20 dB for the frequency 9 kHz to 150 kHz, and the
narrower RBW is 10 kHz and RBWCF is 10 dB for the frequency 150 kHz to 30 MHz.
7.2.6
Test Results
 Spurious Emission below 30MHz (9KHz to 30MHz)
EUT:
MT7697module
Model No.:
Temperature:
20 ℃
Relative Humidity:
Test Mode:
Mode2/Mode3/Mode4 Test By:
wrtnode^7
48%
Eileen Liu
Ant.Pol.
Emission Level(dBuV/m)
Limit 3m(dBuV/m)
Over(dB)
Freq.
(MHz)
H/V
PK
AV
PK
AV
PK
AV
--------Note: the amplitude of spurious emission that is attenuated by more than 20dB below the permissible
limit has no need to be reported.
Distance extrapolation factor =20log(Specific distance/ test distance)( dB);
Limit line=Specific limits(dBuV) + distance extrapolation factor
N2016.11.05.1105.V.1.0
Page 23 of 59

Report No.:NTEK-2017NT04102559F1
Spurious Emission below 1GHz (30MHz to 1GHz)
All the modulation modes have been tested, and the worst result was report as below:
wrtnode^7
EUT:
Model Name :
MT7697module
Temperature:
Pressure:
Test Voltage :
20 ℃
Relative Humidity: 48%
Test Mode:
1010hPa
Normal Link- FPCB Antenna
DC 5V from Adapter AC 120V/60Hz
Note:The EUT has two Antennas, This Antenna is FPCB Antenna
Polar
(H/V)
Frequency
Meter
Reading
Factor
Emission
Level
Limits
Margin
(MHz)
(dBuV)
(dB)
(dBuV/m)
(dBuV/m)
(dB)
Remark
31.3992
5.56
19.13
24.69
40.00
66.2660
20.06
6.60
26.66
40.00
162.6106
24.49
12.01
36.50
43.50
171.9944
22.44
11.56
34.00
43.50
247.6819
20.70
14.83
35.53
46.00
261.9753
17.31
15.75
33.06
46.00
Remark:
Absolute Level= ReadingLevel+ Factor, Margin= Absolute Level - Limit
-15.31
-13.34
-7.00
-9.50
-10.47
-12.94
QP
QP
QP
QP
QP
QP
N2016.11.05.1105.V.1.0
Page 24 of 59
Polar
(H/V)
Report No.:NTEK-2017NT04102559F1
Frequency
Meter
Reading
Factor
Emission
Level
Limits
Margin
(MHz)
(dBuV)
(dB)
(dBuV/m)
(dBuV/m)
(dB)
Remark
30.5304
6.06
19.59
25.65
40.00
114.9167
11.35
13.22
24.57
43.50
157.0072
15.37
12.44
27.81
43.50
260.1444
20.45
15.78
36.23
46.00
372.0045
15.03
18.88
33.91
46.00
768.7481
10.28
27.80
38.08
46.00
Remark:
Absolute Level= ReadingLevel+ Factor, Margin= Absolute Level - Limit
-14.35
-18.93
-15.69
-9.77
-12.09
-7.92
QP
QP
QP
QP
QP
QP
N2016.11.05.1105.V.1.0
Page 25 of 59
EUT:
Temperature:
Pressure:
Report No.:NTEK-2017NT04102559F1
wrtnode^7
Model Name :
Relative Humidity:48%
Test Mode:
Mode 1- Ceramic Antenna
MT7697module
20 ℃
1010hPa
Test Voltage :
DC 5V from Adapter AC 120V/60Hz
Note:The EUT has two Antennas, This Antenna is Ceramic Antenna
Polar
(H/V)
Frequency
Meter
Reading
Factor
Emission
Level
Limits
Margin
(MHz)
(dBuV)
(dB)
(dBuV/m)
(dBuV/m)
(dB)
Remark
69.3568
18.54
7.27
25.81
40.00
96.4361
14.61
11.58
26.19
43.50
163.1818
22.46
11.98
34.44
43.50
171.9944
22.44
11.56
34.00
43.50
261.9753
14.81
15.75
30.56
46.00
348.0274
10.41
17.75
28.16
46.00
Remark:
Absolute Level= ReadingLevel+ Factor, Margin= Absolute Level - Limit
-14.19
-17.31
-9.06
-9.50
-15.44
-17.84
QP
QP
QP
QP
QP
QP
N2016.11.05.1105.V.1.0
Page 26 of 59
Polar
(H/V)
Report No.:NTEK-2017NT04102559F1
Frequency
Meter
Reading
Factor
Emission
Level
Limits
Margin
(MHz)
(dBuV)
(dB)
(dBuV/m)
(dBuV/m)
(dB)
Remark
138.8735
9.71
12.96
22.67
43.50
157.0073
14.87
12.44
27.31
43.50
235.8163
19.31
12.77
32.08
46.00
268.4852
18.80
15.65
34.45
46.00
372.0045
16.03
18.88
34.91
46.00
768.7481
11.78
27.80
39.58
46.00
Remark:
Absolute Level= ReadingLevel+ Factor, Margin= Absolute Level - Limit
-20.83
-16.19
-13.92
-11.55
-11.09
-6.42
QP
QP
QP
QP
QP
QP
N2016.11.05.1105.V.1.0
Page 27 of 59
 Spurious Emission Above 1GHz (1GHz to 25GHz)
EUT:
MT7697module
Temperature:
20 ℃
Report No.:NTEK-2017NT04102559F1
Model No.:
wrtnode^7
Relative Humidity:
48%
Test Mode:
Mode2/Mode3/Mode4- FPCB Antenna Test By:
Eileen Liu
All the modulation modes have been tested, and the worst result was report as below:
Frequenc
(MHz)
Read
Level
(dBμV)
Cable
loss
(dB)
Antenna
Preamp Emission
Limits
Margin
Factor
Factor
Level
dB/m
(dB)
(dBμV/m) (dBμV/m)
(dB)
Low Channel (2402 MHz)(GFSK)--Above 1G
4804.225
4804.225
7206.369
64.41
42.23
63.65
5.21
5.21
6.48
35.59
35.59
36.27
44.30
44.30
44.60
60.91
38.73
61.80
74.00
54.00
74.00
7206.369
4804.201
4804.201
42.29
63.74
45.44
6.48
5.21
5.21
36.27
35.55
35.55
44.60
44.30
44.30
40.44
60.20
41.90
54.00
74.00
54.00
7206.417
7206.417
65.58
45.16
4882.368
4882.368
Remark
Comment
-13.09
-15.27
-12.20
Pk
AV
Pk
Vertical
-13.56
-13.80
-12.10
AV
Pk
AV
6.48
6.48
36.27
44.52
63.81
74.00
-10.19
36.27
44.52
43.39
54.00
-10.61
Mid Channel (2441 MHz)(GFSK)--Above 1G
Pk
AV
62.23
46.59
5.21
5.21
35.66
35.66
44.20
44.20
58.90
43.26
74.00
54.00
-15.10
-10.74
Pk
AV
7323.264
7323.264
4882.226
65.57
43.21
65.59
7.10
7.10
5.21
36.50
36.50
35.66
44.43
44.43
44.20
64.74
42.38
62.26
74.00
54.00
74.00
-9.26
-11.62
-11.74
Pk
AV
Pk
4882.226
7323.191
7323.191
42.25
63.25
42.11
5.21
7.10
7.10
35.66
44.20
38.92
54.00
-15.08
36.50
44.43
62.42
74.00
-11.58
36.50
44.43
41.28
54.00
-12.72
High Channel (2480 MHz)(GFSK)-- Above 1G
AV
Pk
AV
4960.292
65.54
5.21
35.52
44.21
62.06
74.00
-11.94
Pk
4960.292
7440.133
7440.133
46.63
65.59
43.32
5.21
7.10
7.10
35.52
36.53
36.53
44.21
44.60
44.60
43.15
64.62
42.35
54.00
74.00
54.00
-10.85
-9.38
-11.65
AV
Pk
AV
4960.249
4960.249
7440.193
65.58
42.02
62.35
5.21
5.21
7.10
35.52
35.52
36.53
44.21
44.21
44.60
62.10
38.54
61.38
74.00
54.00
74.00
-11.90
-15.46
-12.62
Pk
AV
Pk
7440.193
43.33
7.10
36.53
44.60
42.36
54.00
-11.64
AV
Vertical
Vertical
Vertical
Horizontal
Horizontal
Horizontal
Horizontal
Vertical
Vertical
Vertical
Vertical
Horizontal
Horizontal
Horizontal
Horizontal
Vertical
Vertical
Vertical
Vertical
Horizontal
Horizontal
Horizontal
Horizontal
Note: (1) All Readings are Peak Value (VBW=3MHz) and AV Value (VBW=10Hz).
(2) Emission Level= Antenna Factor + Cable Loss + Read Level - Preamp Factor
(3)All other emissions more than 20dB below the limit.
(4) The EUT has two Antennas, This Antenna is FPCB Antenna
N2016.11.05.1105.V.1.0
Page 28 of 59
 Spurious Emission in Band edge
EUT:
MT7697module
Temperature:
20 ℃
Report No.:NTEK-2017NT04102559F1
Model No.:
wrtnode^7
Relative Humidity:
48%
Test Mode:
Mode2/ Mode4/ Mode5- FPCB Antenna Test By:
Eileen Liu
All the modulation modes have been tested, and the worst result was report as below:
Frequenc Meter
Reading
(MHz)
(dBμV)
Cable
Loss
(dB)
2310.00
2310.00
2310.00
2310.00
2390.00
2390.00
2390.00
2390.00
2483.50
2483.50
2483.50
2483.50
58.95
43.32
65.59
42.14
60.67
41.11
63.36
41.19
59.67
41.36
59.52
44.64
2.97
2.97
2.97
2.97
3.14
3.14
3.14
3.14
3.58
3.58
3.58
3.58
2310.00
2310.00
2310.00
2310.00
2390.00
2390.00
2390.00
2390.00
2483.50
2483.50
2483.50
2483.50
60.52
41.78
62.35
41.13
62.59
41.15
62.37
41.18
62.59
42.32
60.59
42.21
2.97
2.97
2.97
2.97
3.14
3.14
3.14
3.14
3.58
3.58
3.58
3.58
Antenna Preamp Emission
Limits
Factor
Factor
Level
dB/m
(dB)
(dBμV/m) (dBμV/m)
1Mbps(GFSK)- Non-hopping
27.80
43.80
45.92
74
27.80
43.80
30.29
54
27.80
43.80
52.56
74
27.80
43.80
29.11
54
27.21
43.80
47.22
74
27.21
43.80
27.66
54
27.21
43.80
49.91
74
27.21
43.80
27.74
54
27.70
44.00
46.95
74
27.70
44.00
28.64
54
27.70
44.00
46.80
74
27.70
44.00
31.92
54
1Mbps (GFSK)- hopping
27.80
43.80
47.49
74
27.80
43.80
28.75
54
27.80
43.80
49.32
74
27.80
43.80
28.10
54
27.21
43.80
49.14
74
27.21
43.80
27.70
54
27.21
43.80
48.92
74
27.21
43.80
27.73
54
27.70
44.00
49.87
74
27.70
44.00
29.60
54
27.70
44.00
47.87
74
27.70
44.00
29.49
54
Margin
Detector
(dB)
Type
-28.08
-23.71
-21.44
-24.89
-26.78
-26.34
-24.09
-26.26
-27.05
-25.36
-27.2
-22.08
Pk
AV
Pk
AV
Pk
AV
Pk
AV
Pk
AV
Pk
AV
Horizontal
Horizontal
Vertical
Vertical
Vertical
Vertical
Horizontal
Horizontal
Vertical
Vertical
Horizontal
Horizontal
-26.51
-25.25
-24.68
-25.9
-24.86
-26.3
-25.08
-26.27
-24.13
-24.4
-26.13
-24.51
Pk
AV
Pk
AV
Pk
AV
Pk
AV
Pk
AV
Pk
AV
Horizontal
Horizontal
Vertical
Vertical
Vertical
Vertical
Horizontal
Horizontal
Vertical
Vertical
Horizontal
Horizontal
Comment
Note: (1) All other emissions more than 20dB below the limit.
(2) The EUT has two Antennas, This Antenna is FPCB Antenna
N2016.11.05.1105.V.1.0
Page 29 of 59
Report No.:NTEK-2017NT04102559F1
 Spurious Emission in Restricted Band 3260MMHz-18000MHz
EUT:
MT7697module
Model No.:
Temperature:
20 ℃
wrtnode^7
Relative Humidity:
48%
Test Mode:
Mode2/ Mode4- FPCB Antenna Test By:
Eileen Liu
All the modulation modes have been tested, and the worst result was report as below:
Frequenc Readin Cable Antenn Preamp Emission
Detect
Limits Margin
g Level Loss
Factor
Level
or
Comment
(dBμ
(dBμ
(MHz)
(dBμV) (dB)
dB/m
(dB)
(dB)
Type
V/m)
V/m)
3260
62.35
4.04
29.57
44.70
51.26
74
-22.74
Pk
Vertical
3260
41.12
4.04
29.57
44.70
30.03
54
-23.97
AV
Vertical
3260
62.52
4.04
29.57
44.70
51.43
74
-22.57
Pk
Horizontal
3260
50.95
4.04
29.57
44.70
39.86
54
-14.14
AV
Horizontal
3332
63.34
4.26
29.87
44.40
53.07
74
-20.93
Pk
Vertical
3332
48.74
4.26
29.87
44.40
38.47
54
-15.53
AV
Vertical
3332
62.59
4.26
29.87
44.40
52.32
74
-21.68
Pk
Horizontal
3332
42.23
4.26
29.87
44.40
31.96
54
-22.04
AV
Horizontal
17797
41.17
10.99
43.95
43.50
52.61
74
-21.39
Pk
Vertical
17797
26.69
10.99
43.95
43.50
38.13
54
-15.87
AV
Vertical
17788
41.17
11.81
43.69
44.60
52.07
74
-21.93
Pk
Horizontal
17788
28.95
11.81
43.69
44.60
39.85
54
-14.15
AV
Horizontal
Note: (1) All other emissions more than 20dB below the limit.
(2) The EUT has two Antennas, This Antenna is FPCB Antenna
N2016.11.05.1105.V.1.0
Page 30 of 59
 Spurious Emission Above 1GHz (1GHz to 25GHz)
EUT:
MT7697module
Temperature:
20 ℃
Report No.:NTEK-2017NT04102559F1
Model No.:
wrtnode^7
Relative Humidity:
48%
Test Mode:
Mode2/Mode3/Mode4- Ceramic Antenna Test By:
Eileen Liu
All the modulation modes have been tested, and the worst result was report as below:
Frequenc
(MHz)
Read
Level
(dBμV)
Cable
loss
(dB)
Antenna Preamp Emission
Limits
Margin
Factor
Factor
Level
dB/m
(dB)
(dBμV/m) (dBμV/m)
(dB)
Low Channel (2402 MHz)(GFSK)--Above 1G
4804.15
66.52
5.21
35.59
44.30
63.02
74.00
4804.15
41.18
5.21
35.59
44.30
37.68
54.00
7206.21
62.64
6.48
36.27
44.60
60.79
7206.21
41.98
6.48
36.27
44.60
40.13
Remark
Comment
-10.98
Pk
Vertical
-16.32
AV
Vertical
74.00
-13.21
Pk
Vertical
54.00
-13.87
AV
Vertical
4804.14
63.34
5.21
35.55
44.30
59.80
74.00
-14.20
Pk
Horizontal
4804.14
46.47
5.21
35.55
44.30
42.93
54.00
-11.07
AV
Horizontal
7206.25
65.58
6.48
36.27
44.52
63.81
74.00
-10.19
Pk
Horizontal
7206.25
46.69
6.48
36.27
44.52
44.92
54.00
-9.08
Mid Channel (2441 MHz)(GFSK)--Above 1G
AV
Horizontal
4882.21
63.34
5.21
35.66
44.20
60.01
74.00
-13.99
Pk
Vertical
4882.21
45.58
5.21
35.66
44.20
42.25
54.00
-11.75
AV
Vertical
7323.26
66.67
7.10
36.50
44.43
65.84
74.00
-8.16
Pk
Vertical
7323.26
42.19
7.10
36.50
44.43
41.36
54.00
-12.64
AV
Vertical
4882.25
66.65
5.21
35.66
44.20
63.32
74.00
-10.68
Pk
Horizontal
4882.25
43.34
5.21
35.66
44.20
40.01
54.00
-13.99
AV
Horizontal
7323.04
64.44
7.10
36.50
44.43
63.61
74.00
-10.39
Pk
Horizontal
7323.04
43.96
7.10
36.50
44.43
43.13
54.00
-10.87
High Channel (2480 MHz)(GFSK)-- Above 1G
AV
Horizontal
4960.16
66.56
5.21
35.52
44.21
63.08
74.00
-10.92
Pk
Vertical
4960.16
45.54
5.21
35.52
44.21
42.06
54.00
-11.94
AV
Vertical
7440.26
66.69
7.10
36.53
44.60
65.72
74.00
-8.28
Pk
Vertical
7440.26
42.21
7.10
36.53
44.60
41.24
54.00
-12.76
AV
Vertical
4960.27
66.69
5.21
35.52
44.21
63.21
74.00
-10.79
Pk
Horizontal
4960.27
43.38
5.21
35.52
44.21
39.90
54.00
-14.10
AV
Horizontal
7440.15
63.39
7.10
36.53
44.60
62.42
74.00
-11.58
Pk
Horizontal
7440.15
42.57
7.10
36.53
44.60
41.60
54.00
-12.40
AV
Horizontal
Note: (1) All Readings are Peak Value (VBW=3MHz) and AV Value (VBW=10Hz).
(2) Emission Level= Antenna Factor + Cable Loss + Read Level - Preamp Factor
(3)All other emissions more than 20dB below the limit.
(4) The EUT has two Antennas, This Antenna is Ceramic Antenna
N2016.11.05.1105.V.1.0
Page 31 of 59
Report No.:NTEK-2017NT04102559F1
 Spurious Emission in Band edge
EUT:
MT7697module
Model No.:
wrtnode^7
Relative
20 ℃
48%
Temperature:
Humidity:
Test Mode:
Mode2/ Mode4/ Mode5- Ceramic Antenna Test By:
Eileen Liu
All the modulation modes have been tested, and the worst result was report as below:
Frequenc Meter
Reading
(MHz)
(dBμV)
Cable
Loss
(dB)
2310.00
2310.00
2310.00
2310.00
2390.00
2390.00
2390.00
2390.00
2483.50
2483.50
2483.50
2483.50
59.85
42.23
66.67
43.14
59.86
42.25
62.85
42.74
60.53
42.22
60.69
45.58
2.97
2.97
2.97
2.97
3.14
3.14
3.14
3.14
3.58
3.58
3.58
3.58
2310.00
2310.00
2310.00
2310.00
2390.00
2390.00
2390.00
2390.00
2483.50
2483.50
2483.50
2483.50
59.53
42.26
61.17
42.75
63.96
42.26
61.01
42.24
62.33
42.35
59.85
41.13
2.97
2.97
2.97
2.97
3.14
3.14
3.14
3.14
3.58
3.58
3.58
3.58
Antenna Preamp Emission
Limits
Factor
Factor
Level
dB/m
(dB)
(dBμV/m) (dBμV/m)
1Mbps(GFSK)- Non-hopping
27.80
43.80
46.82
74
27.80
43.80
29.20
54
27.80
43.80
53.64
74
27.80
43.80
30.11
54
27.21
43.80
46.41
74
27.21
43.80
28.80
54
27.21
43.80
49.40
74
27.21
43.80
29.29
54
27.70
44.00
47.81
74
27.70
44.00
29.50
54
27.70
44.00
47.97
74
27.70
44.00
32.86
54
1Mbps (GFSK)- hopping
27.80
43.80
46.50
74
27.80
43.80
29.23
54
27.80
43.80
48.14
74
27.80
43.80
29.72
54
27.21
43.80
50.51
74
27.21
43.80
28.81
54
27.21
43.80
47.56
74
27.21
43.80
28.79
54
27.70
44.00
49.61
74
27.70
44.00
29.63
54
27.70
44.00
47.13
74
27.70
44.00
28.41
54
Margin
Detector
(dB)
Type
-27.18
-24.8
-20.36
-23.89
-27.59
-25.2
-24.6
-24.71
-26.19
-24.5
-26.03
-21.14
Pk
AV
Pk
AV
Pk
AV
Pk
AV
Pk
AV
Pk
AV
Horizontal
Horizontal
Vertical
Vertical
Vertical
Vertical
Horizontal
Horizontal
Vertical
Vertical
Horizontal
Horizontal
-27.5
-24.77
-25.86
-24.28
-23.49
-25.19
-26.44
-25.21
-24.39
-24.37
-26.87
-25.59
Pk
AV
Pk
AV
Pk
AV
Pk
AV
Pk
AV
Pk
AV
Horizontal
Horizontal
Vertical
Vertical
Vertical
Vertical
Horizontal
Horizontal
Vertical
Vertical
Horizontal
Horizontal
Comment
Note: (1) All other emissions more than 20dB below the limit.
(2) The EUT has two Antennas, This Antenna is Ceramic Antenna
N2016.11.05.1105.V.1.0
Page 32 of 59
Report No.:NTEK-2017NT04102559F1
 Spurious Emission in Restricted Band 3260MMHz-18000MHz
EUT:
MT7697module
Model No.:
Temperature:
20 ℃
wrtnode^7
Relative Humidity:
48%
Test Mode:
Mode2/ Mode4- Ceramic Antenna
Test By:
Eileen Liu
All the modulation modes have been tested, and the worst result was report as below:
Frequenc Readin Cable Antenn Preamp Emission
Detecto
Limits Margin
g Level Loss
Factor
Level
Comment
(dBμ
(dBμ
(MHz)
(dBμV) (dB)
dB/m
(dB)
(dB)
Type
V/m)
V/m)
3260
61.23
4.04
29.57
44.70
50.14
74
-23.86
Pk
Vertical
3260
42.21
4.04
29.57
44.70
31.12
54
-22.88
AV
Vertical
3260
61.59
4.04
29.57
44.70
50.50
74
-23.50
Pk
Horizontal
3260
49.85
4.04
29.57
44.70
38.76
54
-15.24
AV
Horizontal
3332
62.34
4.26
29.87
44.40
52.07
74
-21.93
Pk
Vertical
3332
48.74
4.26
29.87
44.40
38.47
54
-15.53
AV
Vertical
3332
63.34
4.26
29.87
44.40
53.07
74
-20.93
Pk
Horizontal
3332
44.56
4.26
29.87
44.40
34.29
54
-19.71
AV
Horizontal
17797
41.13
10.99
43.95
43.50
52.57
74
-21.43
Pk
Vertical
17797
27.56
10.99
43.95
43.50
39.00
54
-15.00
AV
Vertical
17788
42.26
11.81
43.69
44.60
53.16
74
-20.84
Pk
Horizontal
17788
29.86
11.81
43.69
44.60
40.76
54
-13.24
AV
Horizontal
Note: (1) All other emissions more than 20dB below the limit.
(2) The EUT has two Antennas, This Antenna is Ceramic Antenna
N2016.11.05.1105.V.1.0
Page 33 of 59
Report No.:NTEK-2017NT04102559F1
7.3 NUMBER OF HOPPING CHANNEL
7.3.1
Applicable Standard
According to FCC Part 15.247(a)(1) (iii)and ANSI C63.10-2013
7.3.2
Conformance Limit
Frequency hopping systems in the 2400-2483.5MHz band shall use at least 15 channels.
7.3.3
Measuring Instruments
The Measuring equipment is listed in the section 6.3 of this test report.
7.3.4
Test Setup
Please refer to Section 6.1 of this test report.
7.3.5
Test Procedure
The testing follows ANSI C63.10-2013 clause 7.8.3
The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator.
The path loss was compensated to the results for each measurement.
Set to the maximum power setting and enable the EUT transmit continuously.
The EUT must have its hopping function enabled.
Use the following spectrum analyzer settings:
Span = the frequency band of operation
RBW  1% of the span
VBW  RBW
Sweep = auto
Detector function = peak
Trace = max hold
7.3.6
Test Results
EUT:
MT7697module
Model No.:
wrtnode^7
Temperature:
20 ℃
Relative Humidity:
48%
Test Mode:
Mode 5(1Mbps)
Test By:
Eileen Liu
Number of Hopping
(Channel)
79
Adaptive Frequency hopping
(Channel)
20
limit
Verdict
≥15
Pass
N2016.11.05.1105.V.1.0
Page 34 of 59
Report No.:NTEK-2017NT04102559F1
Number of Hopping Channel Plot
N2016.11.05.1105.V.1.0
Page 35 of 59
Report No.:NTEK-2017NT04102559F1
7.4 HOPPING CHANNEL SEPARATION MEASUREMENT
7.4.1
Applicable Standard
According to FCC Part 15.247(a)(1) and ANSI C63.10-2013
7.4.2
Conformance Limit
Frequency hopping systems operating in the 2400-2483.5MHz band shall have hopping channel carrier
frequencies that are separated by 25kHz or two-thirds of the 20dB bandwidth of the hopping channel,
whichever is greater.
7.4.3
Measuring Instruments
The Measuring equipment is listed in the section 6.3 of this test report.
7.4.4
Test Setup
Please refer to Section 6.1 of this test report.
7.4.5
Test Procedure
The testing follows ANSI C63.10-2013 clause 7.8.2
The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator.
The path loss was compensated to the results for each measurement.
Set to the maximum power setting and enable the EUT transmit continuously.
The EUT was operating in controlled its channel.
Use the following spectrum analyzer settings:
Span = Measurement Bandwidth or Channel Separation
RBW  30KHz
VBW  3*RBW
Sweep = auto
Detector function = peak
Trace = max hold
N2016.11.05.1105.V.1.0
Page 36 of 59
7.4.6
Report No.:NTEK-2017NT04102559F1
Test Results
EUT:
MT7697module
Model No.:
wrtnode^7
Temperature:
20 ℃
Relative Humidity:
48%
Test Mode:
Mode2/Mode3/Mode4 Test By:
Modulation
Mode
GFSK
π/4-DQPSK
8DPSK
Channel
Number
Channel
Frequency
(MHz)
39
78
39
78
39
78
2402
2441
2480
2402
2441
2480
2402
2441
2480
Measured
Channel
Separation
(MHz)
Eileen Liu
Limit
(kHz)
>748.667
>736.000
>746.000
>886.667
>889.333
>891.333
>895.333
>894.667
>890.000
Verdict
2/3 of 20dB BW
2/3 of 20dB BW
2/3 of 20dB BW
2/3 of 20dB BW
2/3 of 20dB BW
2/3 of 20dB BW
2/3 of 20dB BW
2/3 of 20dB BW
2/3 of 20dB BW
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
N2016.11.05.1105.V.1.0
Page 37 of 59
Report No.:NTEK-2017NT04102559F1
Test Plot
(1Mbps) Channel Separation plot on channel 00-01
(2Mbps) Channel Separation plot on channel 00-01
(1Mbps) Channel Separation plot on channel 39-40
(2Mbps) Channel Separation plot on channel 39-40
(1Mbps) Channel Separation plot on channel 77-78
(2Mbps) Channel Separation plot on channel 77-78
N2016.11.05.1105.V.1.0
Page 38 of 59
Report No.:NTEK-2017NT04102559F1
Test Plot
(3Mbps) Channel Separation plot on channel 00-01
(3Mbps) Channel Separation plot on channel 39-40
(3Mbps) Channel Separation plot on channel 77-78
N2016.11.05.1105.V.1.0
Page 39 of 59
Report No.:NTEK-2017NT04102559F1
7.5 AVERAGE TIME OF OCCUPANCY (DWELL TIME)
7.5.1
Applicable Standard
According to FCC Part 15.247(a)(1)(iii) and ANSI C63.10-2013
7.5.2
Conformance Limit
The average time of occupancy on any channel shall not be greater than 0.4s within a period of 0.4s
multiplied by the number of hopping channels employed.
7.5.3
Measuring Instruments
The Measuring equipment is listed in the section 6.3 of this test report.
7.5.4
Test Setup
Please refer to Section 6.1 of this test report.
7.5.5
Test Procedure
The testing follows ANSI C63.10-2013 clause 7.8.4
The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator.
The path loss was compensated to the results for each measurement.
Set to the maximum power setting and enable the EUT transmit continuously.
The EUT must have its hopping function enabled.
Use the following spectrum analyzer settings:
Span = zero span, centered on a hopping channel
RBW  1MHz
VBW  RBW
Sweep = as necessary to capture the entire dwell time per hopping channel
Detector function = peak
Trace = max hold
Measure the maximum time duration of one single pulse.
Set the EUT for DH5, DH3 and DH1 packet transmitting.
Measure the maximum time duration of one single pulse.
N2016.11.05.1105.V.1.0
Page 40 of 59
7.5.6
Report No.:NTEK-2017NT04102559F1
Test Results
EUT:
MT7697module
Model No.:
wrtnode^7
Temperature:
20 ℃
Relative Humidity:
48%
Test Mode:
Mode2/Mode3/Mode4 Test By:
Modulatio Channel
n Mode
Number
GFSK
π/4DQPSK
8DPSK
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
Packet
type
DH1
DH3
DH5
2DH1
2DH3
2DH5
3DH1
3DH3
3DH5
Mode
Normal
AFH
Normal
AFH
Normal
AFH
Normal
AFH
Normal
AFH
Normal
AFH
Normal
AFH
Normal
AFH
Normal
AFH
Hops
Over
Occupanc
(ms)
320
160
160
80
106.67
53.33
320
160
160
80
106.67
53.33
320
160
160
80
106.67
53.33
Eileen Liu
Pulse
width
(ms)
0.416
0.416
1.675
1.675
2.96
2.96
0.416
0.416
1.675
1.675
2.907
2.907
0.416
0.416
1.667
1.667
2.933
2.933
dwell time
(ms)
133.120
66.560
268.000
134.000
315.743
157.857
133.120
66.560
268.000
134.000
310.090
155.030
133.120
66.560
266.720
133.360
312.863
156.417
Limit
(ms)
<400
<400
<400
<400
<400
<400
<400
<400
<400
<400
<400
<400
<400
<400
<400
<400
<400
<400
Verdict
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
Note:
A Period Time = (channel number)*0.4
DH1 Time Slot: Reading * (1600/2)*31.6/(channel number)
DH3 Time Slot: Reading * (1600/4)*31.6/(channel number)
DH5 Time Slot: Reading * (1600/6)*31.6/(channel number)
For Example:
1. In normal mode, hopping rate is 1600 hops/s with 6 slots in 79 hopping channels.
With channel hopping rate (1600 / 6 / 79) in Occupancy Time Limit (0.4 x 79) (s),
Hops Over Occupancy Time comes to (1600 / 6 / 79) x (0.4 x 79) = 106.67 hops.
2. In AFH mode, hopping rate is 800 hops/s with 6 slots in 20 hopping channels.
With channel hopping rate (800 / 6 / 20) in Occupancy Time Limit (0.4 x 20) (s),
Hops Over Occupancy Time comes to (800 / 6 / 20) x (0.4 x 20) = 53.33 hops.
3. Dwell Time(s) = Hops Over Occupancy Time (hops) x Package Transfer Time
N2016.11.05.1105.V.1.0
Page 41 of 59
Report No.:NTEK-2017NT04102559F1
Test Plot
Package Transfer Time Plot CH39-DH1
Package Transfer Time Plot CH39-2DH1
Package Transfer Time Plot CH39-DH3
Package Transfer Time Plot CH39-2DH3
Package Transfer Time Plot CH39-DH5
Package Transfer Time Plot CH39-2DH5
N2016.11.05.1105.V.1.0
Page 42 of 59
Report No.:NTEK-2017NT04102559F1
Test Plot
Package Transfer Time Plot CH39-3DH1
Package Transfer Time Plot CH39-3DH3
Package Transfer Time Plot CH39-3DH5
N2016.11.05.1105.V.1.0
Page 43 of 59
Report No.:NTEK-2017NT04102559F1
7.6 20DB BANDWIDTH TEST
7.6.1
Applicable Standard
According to FCC Part 15.247(a)(1) and ANSI C63.10-2013
7.6.2
Conformance Limit
No limit requirement.
7.6.3
Measuring Instruments
The Measuring equipment is listed in the section 6.3 of this test report.
7.6.4
Test Setup
Please refer to Section 6.1 of this test report.
7.6.5
Test Procedure
The testing follows ANSI C63.10-2013 clause 6.9.2
The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator.
The path loss was compensated to the results for each measurement.
Set to the maximum power setting and enable the EUT transmit continuously.
The EUT was operating in controlled its channel.
Use the following spectrum analyzer settings:
Span = approximately 2 to 3 times the 20 dB bandwidth, centered on a hopping channel
RBW  1% of the 20 dB bandwidth
VBW  RBW
Sweep = auto
Detector function = peak
Trace = max hold
N2016.11.05.1105.V.1.0
Page 44 of 59
7.6.6
Report No.:NTEK-2017NT04102559F1
Test Results
EUT:
MT7697module
Model No.:
wrtnode^7
Temperature:
20 ℃
Relative Humidity:
48%
Test Mode:
Mode2/Mode3/Mode4 Test By:
Test Channel
Measured
Frequency Bandwidth(KHz)
2402
2441
2480
39
78
2402
2441
2480
39
78
Note: N/A (Not Applicable)
2402
2441
2480
Limit
Verdict
(kHz)
(MHz)
39
78
Eileen Liu
1Mbps
1123
1104
1119
2Mbps
1330
1334
1337
3Mbps
1343
1342
1335
N/A
N/A
N/A
PASS
PASS
PASS
N/A
N/A
N/A
PASS
PASS
PASS
N/A
N/A
N/A
PASS
PASS
PASS
N2016.11.05.1105.V.1.0
Page 45 of 59
Report No.:NTEK-2017NT04102559F1
Test Plot
20dB Bandwidth plot on channel 00 (1Mbps)
20dB Bandwidth plot on channel 00 (2Mbps)
20dB Bandwidth plot on channel 39 (1Mbps)
20dB Bandwidth plot on channel 39 (2Mbps)
20dB Bandwidth plot on channel 78 (1Mbps)
20dB Bandwidth plot on channel 78 (2Mbps)
N2016.11.05.1105.V.1.0
Page 46 of 59
Report No.:NTEK-2017NT04102559F1
Test Plot
20dB Bandwidth plot on channel 00 (3Mbps)
20dB Bandwidth plot on channel 39 (3Mbps)
20dB Bandwidth plot on channel 78 (3Mbps)
N2016.11.05.1105.V.1.0
Page 47 of 59
Report No.:NTEK-2017NT04102559F1
7.7 PEAK OUTPUT POWER
7.7.1
Applicable Standard
According to FCC Part 15.247(b)(1) and ANSI C63.10-2013
7.7.2
Conformance Limit
The maximum peak conducted output power of the intentional radiator shall not exceed the following: (1) For
frequency hopping systems operating in the 2400-2483.5 MHz band employing at least 75 non-overlapping
hopping channels, and all frequency hopping systems in the 5725-5850 MHz band: 1 watt. For all other
frequency hopping systems in the 2400-2483.5 MHz band 0.125 watts.
7.7.3
Measuring Instruments
The Measuring equipment is listed in the section 6.3 of this test report.
7.7.4
Test Setup
Please refer to Section 6.1 of this test report.
7.7.5
Test Procedure
The testing follows ANSI C63.10-2013 clause 7.8.5.
The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator.
The path loss was compensated to the results for each measurement.
Set to the maximum power setting and enable the EUT transmit continuously.
The EUT was operating in controlled its channel.
Use the following spectrum analyzer settings:
Span = approximately 5 times the 20 dB bandwidth, centered on a hopping channel
RBW  the 20 dB bandwidth of the emission being measured
VBW  RBW
Sweep = auto
Detector function = peak
Trace = max hold
N2016.11.05.1105.V.1.0
Page 48 of 59
7.7.6
Report No.:NTEK-2017NT04102559F1
Test Results
EUT:
MT7697module
Model No.:
wrtnode^7
Temperature:
20 ℃
Relative Humidity:
48%
Test Mode:
Mode2/Mode3/Mode4 Test By:
Test
Channel
Frequenc
(MHz)
39
78
2402
2441
2480
39
78
2402
2441
2480
39
78
2402
2441
2480
Peak
Output
Power
(dBm)
1Mbps
Default
3.15
Default
4.63
Default
4.82
2Mbps
Default
2.66
Default
4.13
Default
4.3
3Mbps
Default
Default
4.5
Default
4.68
Power
Setting
Eileen Liu
LIMIT
Verdict
(dBm)
20.97
20.97
20.97
PASS
PASS
PASS
20.97
20.97
20.97
PASS
PASS
PASS
20.97
20.97
20.97
PASS
PASS
PASS
N2016.11.05.1105.V.1.0
Page 49 of 59
Report No.:NTEK-2017NT04102559F1
Test Plot
Peak output Power plot on channel 00 (1Mbps)
Peak output Power plot on channel 00 (2Mbps)
Peak output Power plot on channel 39 (1Mbps)
Peak output Power plot on channel 39 (2Mbps)
Peak output Power plot on channel 78 (1Mbps)
Peak output Power plot on channel 78 (2Mbps)
N2016.11.05.1105.V.1.0
Page 50 of 59
Report No.:NTEK-2017NT04102559F1
Test Plot
Peak output Power plot on channel 00 (3Mbps)
Peak output Power plot on channel 39 (3Mbps)
Peak output Power plot on channel 78 (3Mbps)
N2016.11.05.1105.V.1.0
Page 51 of 59
Report No.:NTEK-2017NT04102559F1
7.8 CONDUCTED BAND EDGE MEASUREMENT
7.8.1
Applicable Standard
According to FCC Part 15.247(d) and ANSI C63.10-2013
7.8.2
Conformance Limit
In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated
intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall
be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the
desired power, based on either an RF conducted or a radiated measurement, provided the transmitter
demonstrates compliance with the peak conducted power limits. If the transmitter complies with the
conducted power limits based on the use of RMS averaging over a time interval, as permitted under
paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20
dB. Attenuation below the general limits specified in §15.209(a) is not required. In addition, radiated
emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated
emission limits specified in §15.209(a) (see §15.205(c)).
7.8.3
Measuring Instruments
The Measuring equipment is listed in the section 6.3 of this test report.
7.8.4
Test Setup
Please refer to Section 6.1 of this test report.
7.8.5
Test Procedure
The testing follows ANSI C63.10-2013 clause 7.8.6.
The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator.
The path loss was compensated to the results for each measurement.
Set to the maximum power setting and enable the EUT transmit continuously.
The EUT must have its hopping function enabled.
Use the following spectrum analyzer settings:
Span = approximately 5 times the 20 dB bandwidth, centered on a hopping channel
RBW = 100KHz
VBW = 300KHz
Band edge emissions must be at least 20 dB down from the highest emission level within the authorized band as
measured with a 100kHz RBW. The attenuation shall be 30 dB instead of 20 dB when RMS conducted output power
procedure is used.
Measure the highest amplitude appearing on spectral display and set it as a reference level. Plot the graph with marking
the highest point and edge frequency.
Repeat above procedures until all measured frequencies were complete.
N2016.11.05.1105.V.1.0
Page 52 of 59
7.8.6
Report No.:NTEK-2017NT04102559F1
Test Results
EUT:
MT7697module
Model No.:
wrtnode^7
Temperature:
20 ℃
Relative Humidity: 48%
Test Mode:
Mode2 /Mode4/ Mode 5
Test By:
Eileen Liu
Note: Hopping enabled and disabled have evaluated,and the wortest data was reported
Test Plot
BDR mode (GFSK): Band Edge-Low Channel
BDR mode (GFSK): Band Edge-High Channel
BDR mode (GFSK): Band Edge-Low Channel
BDR mode (GFSK): Band Edge-High Channel
(Hopping Mode)
(Hopping Mode)
N2016.11.05.1105.V.1.0
Page 53 of 59
Report No.:NTEK-2017NT04102559F1
Test Plot
BDR mode (π/4-DQPSK): Band Edge-Low
BDR mode (π/4-DQPSK): Band Edge-High Channel
Channel
BDR mode (π/4-DQPSK): Band Edge-Low
BDR mode (π/4-DQPSK): Band Edge-High Channel
Channel (Hopping Mode)
(Hopping Mode)
N2016.11.05.1105.V.1.0
Page 54 of 59
Report No.:NTEK-2017NT04102559F1
Test Plot
BDR mode (8DPSK): Band Edge-Low Channel
BDR mode (8DPSK): Band Edge-High Channel
BDR mode (8DPSK): Band Edge-Low Channel
BDR mode (8DPSK): Band Edge-High Channel
(Hopping Mode)
(Hopping Mode)
N2016.11.05.1105.V.1.0
Page 55 of 59
Report No.:NTEK-2017NT04102559F1
7.9 SPURIOUS RF CONDUCTED EMISSION
7.9.1
Applicable Standard
According to RSS-247 5.5 & RSS-Gen 6.13.
7.9.2
Conformance Limit
In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated
device is operating, the RF power that is produced shall be at least 20 dB below that in the 100 kHz
bandwidth within the band that contains the highest level of the desired power, based on either an RF
conducted or a radiated measurement, provided that the transmitter demonstrates compliance with the peak
conducted power limits. If the transmitter complies with the conducted power limits based on the use of
root-mean-square averaging over a time interval, as permitted under Section 5.4(4), the attenuation
required shall be 30 dB instead of 20 dB. Attenuation below the general field strength limits specified
in RSS-Gen is not required..
7.9.3
Measuring Instruments
The Measuring equipment is listed in the section 6.3 of this test report.
7.9.4
Test Setup
Please refer to Section 6.1 of this test report.
7.9.5
Test Procedure
The Spurious RF conducted emissions compliance of RF radiated emission should be measured by
following the guidance in RSS-247 5.5 with respect to maximizing the emission by rotating the EUT,
measuring the emission while the EUT is situated in three orthogonal planes (if appropriate), adjusting the
measurement antenna height and polarization etc. Set RBW=100kHz and VBW= 300KHz to measure the
peak field strength , and mwasure frequeny range from 9KHz to 26.5GHz.
7.9.6
Test Results
Remark: The measurement frequency range is from 9KHz to the 10th harmonic of the fundamental
frequency. The lowest, middle and highest channels are tested to verify the spurious emissions and bandege
measurement data.
The worst mode is GFSK mode, and the report only show the worst mode data.
N2016.11.05.1105.V.1.0
Page 56 of 59
Report No.:NTEK-2017NT04102559F1
Test Plot(GFSK)
GFSK on channel 00
GFSK on channel 00
GFSK on channel 00
GFSK on channel 00
N2016.11.05.1105.V.1.0
Page 57 of 59
Report No.:NTEK-2017NT04102559F1
Test Plot
GFSK on channel 39
GFSK on channel 39
GFSK on channel 39
GFSK on channel 39
N2016.11.05.1105.V.1.0
Page 58 of 59
Report No.:NTEK-2017NT04102559F1
Test Plot
GFSK on channel 78
GFSK on channel 78
GFSK on channel 78
GFSK on channel 78
N2016.11.05.1105.V.1.0
Page 59 of 59
Report No.:NTEK-2017NT04102559F1
7.10 ANTENNA APPLICATION
7.10.1 Antenna Requirement
15.203 requirement: For intentional device, according to 15.203: an intentional radiator shall be designed to
ensure that no antenna other than that furnished by the responsible partyshall be used with the device.
7.10.2 Result
The EUT antenna is permanent attached Ceramic antenna(Gain:0.5dBi). It comply with the standard
requirement.
END OF REPORT
N2016.11.05.1105.V.1.0
Download: WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Mirror Download [FCC.gov]WRTNODE7 MT7697module Test Report BT Report for FCC ID Beijing wanglianzhiyuan Tech Inc
Document ID3422467
Application IDh8dLbQl9dt2DC8LIwMNcUg==
Document DescriptionTest Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize69.76kB (871949 bits)
Date Submitted2017-06-12 00:00:00
Date Available2017-06-12 00:00:00
Creation Date2017-06-02 16:43:51
Producing SoftwareAcrobat Distiller 15.0 (Windows)
Document Lastmod2017-06-02 16:44:09
Document TitleBT Report for FCC ID
Document CreatorPScript5.dll Version 5.2.2
Document Author: ntek205

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : ntek205
Create Date                     : 2017:06:02 16:43:51+08:00
Modify Date                     : 2017:06:02 16:44:09+08:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Creator                         : ntek205
Title                           : Microsoft Word - BT Report for FCC ID
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:06:02 16:44:09+08:00
Producer                        : Acrobat Distiller 15.0 (Windows)
Document ID                     : uuid:a94bb4f7-476b-4c2d-8d72-afa0db3a840c
Instance ID                     : uuid:e098262f-1a91-4432-aa95-2b04a3ea21ee
Page Count                      : 59