FCC ID 2ALS8-NB2588

IoT Device

by Ninebot (Changzhou) Tech Co., Ltd.

Grantee Code: 2ALS8   Product Code: NB2588
Latest application date: 2019-01-31

FCC ID Device Details

FCC ID2ALS8-NB2588
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ALS8
Product CodeNB2588
Applicant BusinessNinebot (Changzhou) Tech Co., Ltd. 🇨🇳
Related Domains ninebot.com sgs.com
Equipment ClassIoT Device
Test FirmSGS-CSTC Standards Technical Services Co., Ltd

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2019-01-31
699-716 MHzOriginal Equipment2019-01-31

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2019-07-30PDF 1.1 MB
Internal PhotoInternal Photos2019-07-30PDF 2.9 MB
External PhotoExternal Photos2019-07-30PDF 1.2 MB
LabelID Label/Location Info2019-01-31PDF 487.9 KB
Setup PhotoTest Setup Photos2019-07-30PDF 1.6 MB
Test ReportTest Report2019-01-31PDF 4.8 MB
Test ReportTest Report2019-01-31PDF 1.3 MB
Authorization LetterCover Letter(s)2019-01-31PDF 333.6 KB
Confidentiality LetterCover Letter(s)2019-01-31PDF 295.7 KB
RF Exposure InfoRF Exposure Info2019-01-31PDF 528.6 KB
RF Exposure ReportRF Exposure Info2019-01-31PDF 528.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 642.8 KB
Schematics Metadata onlySchematicsPDF 363.5 KB
Operation Description Metadata onlyOperational DescriptionPDF 39.8 KB
Tune Up Info Metadata onlyParts List/Tune Up InfoPDF 99.2 KB
Tune Up information Metadata onlyParts List/Tune Up InfoPDF 99.2 KB

Application Information

Application IDbS+s35k6DaugNTqrCEnclw==
Final Action Date2019-01-31
Application PurposeOriginal Equipment
Applicant FRN0026431767
ModelNB2588
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionIoT Device
Responsible PartyJun Jin, jun.jin@ninebot.com , 0519-69657985
Technical ContactKeny Xu, SGS-CSTC Standards Technical Services Co., Ltd., keny.xu@sgs.com , 0755-2654 4119
Non-Technical ContactJing Song, SGS-CSTC Standards Technical Services Co., Ltd., Jing.song@sgs.com , 0755-25328659
Test FirmDerek Yang, SGS-CSTC Standards Technical Services Co., Ltd, Derek-WZ.yang@sgs.com , +86 0135 6484 8721
TCB EmailUSCTS.TCB@SGS.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/30/2019
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThe listed output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and not ne co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
bS+s35k6DaugNTqrCEnclw==2019-01-31Original Equipment
QcMryZStc5JMpsog0lI2sg==2019-01-31Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
699-716 MHz0.13492.5ppm8M96W7D27
699-716 MHz0.17992.5ppm8M96G7D27
1710-1755 MHz0.16072.5ppm13M5W7D27
1710-1755 MHz0.14592.5ppm17M9W7D27
1710-1755 MHz0.19322.5ppm8M94G7D27
1710-1755 MHz0.18662.5ppm17M9G7D27
1850-1910 MHz0.26362.5ppm8M96G7D24E
1850-1910 MHz0.24492.5ppm18M0G7D24E
1850-1910 MHz0.21372.5ppm13M5W7D24E
1850-1910 MHz0.18242.5ppm17M9W7D24E
1852.4-1907.6 MHz0.18282.5ppm4M15F9W24E
2402-2480 MHz0.000090015C

Grants

TCB Grant - Application QcMryZStc5JMpsog0lI2sg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 01/31/2019

Application Dated: 01/31/2019
Ninebot (Changzhou) Tech Co., Ltd.
16F-17F, Block A, Building 3,Changwu Mid
Road 18#,Wujin Dist.,
Changzhou,Jiangsu, 213100
China
 
Attention: Jun Jin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALS8-NB2588
Name of Grantee:  Ninebot (Changzhou) Tech Co., Ltd.
Equipment Class: PCS Licensed Transmitter
Notes: IoT Device
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1766 2.5  PM 4M15F9W
24E 1852.4  -  1907.6 0.1828 2.5  PM 4M15F9W
24E 1850.0  -  1910.0 0.2636 2.5  PM 8M96G7D
24E 1850.0  -  1910.0 0.2449 2.5  PM 18M0G7D
27 1710.0  -  1755.0 0.1932 2.5  PM 8M94G7D
27 1710.0  -  1755.0 0.1866 2.5  PM 17M9G7D
27 699.0  -  716.0 0.1799 2.5  PM 8M96G7D
24E 1850.0  -  1910.0 0.2137 2.5  PM 13M5W7D
24E 1850.0  -  1910.0 0.1824 2.5  PM 17M9W7D
27 1710.0  -  1755.0 0.1607 2.5  PM 13M5W7D
27 1710.0  -  1755.0 0.1459 2.5  PM 17M9W7D
27 699.0  -  716.0 0.1349 2.5  PM 8M96W7D

Output power listed is ERP for UMTS Band V and LTE Band 12, EIRP for UMTS Band II and LTE Band 2/4. This device has 1.4MHz, 3MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Band 2 and LTE Band 4; 1.4MHz, 3MHz, 5 MHz and 10 MHz bandwidth modes for LTE Band 12. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application QcMryZStc5JMpsog0lI2sg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ninebot (Changzhou) Tech Co., Ltd.
16F-17F, Block A, Building 3,Changwu Mid Road 18#,Wujin Dist.,
Changzhou,Jiangsu, 213100
China
  Date of Grant: 01/31/2019

Application Dated: 01/31/2019
 
Attention: Jun Jin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALS8-NB2588
Name of Grantee:  Ninebot (Changzhou) Tech Co., Ltd.
Equipment Class: PCS Licensed Transmitter
Notes: IoT Device
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1766 2.5  PM 4M15F9W
24E 1852.4  -  1907.6 0.1828 2.5  PM 4M15F9W
24E 1850.0  -  1910.0 0.2636 2.5  PM 8M96G7D
24E 1850.0  -  1910.0 0.2449 2.5  PM 18M0G7D
27 1710.0  -  1755.0 0.1932 2.5  PM 8M94G7D
27 1710.0  -  1755.0 0.1866 2.5  PM 17M9G7D
27 699.0  -  716.0 0.1799 2.5  PM 8M96G7D
24E 1850.0  -  1910.0 0.2137 2.5  PM 13M5W7D
24E 1850.0  -  1910.0 0.1824 2.5  PM 17M9W7D
27 1710.0  -  1755.0 0.1607 2.5  PM 13M5W7D
27 1710.0  -  1755.0 0.1459 2.5  PM 17M9W7D
27 699.0  -  716.0 0.1349 2.5  PM 8M96W7D

Output power listed is ERP for UMTS Band V and LTE Band 12, EIRP for UMTS Band II and LTE Band 2/4. This device has 1.4MHz, 3MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Band 2 and LTE Band 4; 1.4MHz, 3MHz, 5 MHz and 10 MHz bandwidth modes for LTE Band 12. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application bS+s35k6DaugNTqrCEnclw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 01/31/2019

Application Dated: 01/31/2019
Ninebot (Changzhou) Tech Co., Ltd.
16F-17F, Block A, Building 3,Changwu Mid
Road 18#,Wujin Dist.,
Changzhou,Jiangsu, 213100
China
 
Attention: Jun Jin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALS8-NB2588
Name of Grantee:  Ninebot (Changzhou) Tech Co., Ltd.
Equipment Class: Digital Transmission System
Notes: IoT Device
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.00009  

The listed output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and not ne co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application bS+s35k6DaugNTqrCEnclw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ninebot (Changzhou) Tech Co., Ltd.
16F-17F, Block A, Building 3,Changwu Mid Road 18#,Wujin Dist.,
Changzhou,Jiangsu, 213100
China
  Date of Grant: 01/31/2019

Application Dated: 01/31/2019
 
Attention: Jun Jin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALS8-NB2588
Name of Grantee:  Ninebot (Changzhou) Tech Co., Ltd.
Equipment Class: Digital Transmission System
Notes: IoT Device
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.00009  

The listed output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and not ne co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: