RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio

Planet Avvio Mobile phone

Page 1 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 2 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 3 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 4 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 5 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 6 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 7 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 8 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 9 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 10 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 11 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 12 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 13 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 14 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 15 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 16 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 17 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 18 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 19 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 20 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 21 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 22 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 23 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 24 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 25 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 26 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 27 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 28 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 29 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 30 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 31 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 32 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 33 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 34 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 35 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 36 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 37 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 38 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 39 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 40 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 41 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 42 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 43 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 44 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 45 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 46 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 47 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 48 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 49 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 50 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 51 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 52 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 53 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 54 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 55 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 56 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 57 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 58 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 59 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 60 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 61 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 62 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 63 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 64 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 65 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 66 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 67 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 68 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 69 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 70 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 71 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 72 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 73 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 74 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 75 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 76 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 77 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 78 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 79 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 80 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Page 81 of RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio

FCC SAR Test Report
Report No. : FA871604
FCC SAR Test Report
APPLICANT
: Planet Avvio LLC
EQUIPMENT
: Mobile phone
BRAND NAME
: Avvio
MODEL NAME
: 301
FCC ID
: 2ALTART301X
STANDARD
: FCC 47 CFR Part 2 (2.1093)
ANSI/IEEE C95.1-1992
IEEE 1528-2013
We, SPORTON INTERNATIONAL (Shenzhen) INC., would like to declare that the tested
sample has been evaluated in accordance with the procedures and had been in compliance
with the applicable technical standards.
The test results in this report apply exclusively to the tested model / sample. Without
written approval of SPORTON INTERNATIONAL (Shenzhen) INC., the test report shall not
be reproduced except in full.
Approved by: Mark Qu / Manager
Sporton International (Shenzhen) Inc.
1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen City,
Guangdong Province 518055, China
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 1 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
Table of Contents
1. Statement of Compliance ............................................................................................................................................. 4
2. Administration Data ...................................................................................................................................................... 5
3. Guidance Applied .......................................................................................................................................................... 5
4. Equipment Under Test (EUT) Information ................................................................................................................... 6
4.1 General Information ............................................................................................................................................... 6
5. RF Exposure Limits....................................................................................................................................................... 7
5.1 Uncontrolled Environment ...................................................................................................................................... 7
5.2 Controlled Environment .......................................................................................................................................... 7
6. Specific Absorption Rate (SAR) ................................................................................................................................... 8
6.1 Introduction ............................................................................................................................................................ 8
6.2 SAR Definition ........................................................................................................................................................ 8
7. System Description and Setup .................................................................................................................................... 9
7.1 E-Field Probe ........................................................................................................................................................10
7.2 Data Acquisition Electronics (DAE) .......................................................................................................................10
7.3 Phantom ................................................................................................................................................................ 11
7.4 Device Holder........................................................................................................................................................12
8. Measurement Procedures ...........................................................................................................................................13
8.1 Spatial Peak SAR Evaluation ................................................................................................................................13
8.2 Power Reference Measurement............................................................................................................................14
8.3 Area Scan .............................................................................................................................................................14
8.4 Zoom Scan ............................................................................................................................................................15
8.5 Volume Scan Procedures ......................................................................................................................................15
8.6 Power Drift Monitoring ...........................................................................................................................................15
9. Test Equipment List .....................................................................................................................................................16
10. System Verification ....................................................................................................................................................17
10.1 Tissue Simulating Liquids ....................................................................................................................................17
10.2 Tissue Verification ...............................................................................................................................................18
10.3 System Performance Check Results...................................................................................................................19
11. RF Exposure Positions ..............................................................................................................................................20
11.1 Ear and handset reference point .........................................................................................................................20
11.2 Definition of the cheek position............................................................................................................................21
11.3 Definition of the tilt position..................................................................................................................................22
11.4 Body Worn Accessory .........................................................................................................................................23
12. Conducted RF Output Power (Unit: dBm) ................................................................................................................24
13. Bluetooth Exclusions Applied ..................................................................................................................................28
14. Antenna Location .......................................................................................................................................................29
15. SAR Test Results .......................................................................................................................................................30
15.1 Head SAR ...........................................................................................................................................................31
15.2 Body Worn Accessory SAR .................................................................................................................................32
16. Simultaneous Transmission Analysis ......................................................................................................................33
16.1 Head Exposure Conditions .................................................................................................................................34
16.2 Body-Worn Accessory Exposure Conditions .......................................................................................................34
17. Uncertainty Assessment ...........................................................................................................................................35
18. References ..................................................................................................................................................................36
Appendix A. Plots of System Performance Check
Appendix B. Plots of High SAR Measurement
Appendix C. DASY Calibration Certificate
Appendix D. Test Setup Photos
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 2 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
Revision History
REPORT NO.
VERSION
FA871604
Rev. 01
DESCRIPTION
Initial issue of report
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 3 of 36
ISSUED DATE
Sep. 21, 2018
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
1. Statement of Compliance
The maximum results of Specific Absorption Rate (SAR) found during testing for Planet Avvio LLC, Mobile
phone, 301, are as follows.
Highest SAR Summary
Equipment
Class
Head
(Separation
0mm)
Frequency
Band
Body-worn
(Separation
15mm)
1g SAR (W/kg)
GSM
Licensed
WCDMA
GSM850
0.75
1.08
GSM1900
0.19
0.20
WCDMA V
0.73
0.69
WCDMA II
0.47
0.34
Date of Testing:
Highest
Simultaneous
Transmission
1g SAR (W/kg)
1.13
2018/8/30 ~ 2018/8/31
This device is in compliance with Specific Absorption Rate (SAR) for general population/uncontrolled
exposure limits (1.6 W/kg) specified in FCC 47 CFR part 2 (2.1093) and ANSI/IEEE C95.1-1992, and had
been tested in accordance with the measurement methods and procedures specified in IEEE 1528-2013 and
FCC KDB publications
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 4 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
2. Administration Data
Test Site
Test Site Location
Testing Laboratory
Sporton International (Shenzhen) Inc.
1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen City,
Guangdong Province 518055, China
TEL: +86-755-8637-9589
FAX: +86-755-8637-9595
Applicant
Company Name
Address
Planet Avvio LLC
9725 NW 117th Ave., Medley, FL 33178, United States
Company Name
Address
China Sum Company Limited
7thFloor,Block B, DaTang Times building, Meilong road, Longhua New District,
Shenzhen, China
Manufacturer
3. Guidance Applied
The Specific Absorption Rate (SAR) testing specification, method, and procedure for this device is in accordance with
the following standards:
‧
FCC 47 CFR Part 2 (2.1093)
‧
ANSI/IEEE C95.1-1992
‧
IEEE 1528-2013
‧
FCC KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04
‧
FCC KDB 865664 D02 SAR Reporting v01r02
‧
FCC KDB 447498 D01 General RF Exposure Guidance v06
‧
FCC KDB 648474 D04 SAR Evaluation Considerations for Wireless Handsets v01r03
‧
FCC KDB 941225 D01 3G SAR Procedures v03r01
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 5 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
4. Equipment Under Test (EUT) Information
4.1 General Information
Product Feature & Specification
Equipment Name
Brand Name
Model Name
FCC ID
IMEI Code
Mobile phone
Avvio
301
2ALTART301X
862433017501230
GSM850: 824.2 MHz ~ 848.8 MHz
GSM1900: 1850.2 MHz ~ 1909.8 MHz
Wireless Technology and
WCDMA Band II: 1852.4 MHz ~ 1907.6 MHz
Frequency Range
WCDMA Band V: 826.4 MHz ~ 846.6 MHz
Bluetooth: 2402 MHz ~ 2480 MHz
GSM/GPRS
RMC/AMR 12.2Kbps
Mode
HSDPA
HSUPA
Bluetooth BR/EDR
HW Version
C719MB_V1.0
SW Version
T3_CLARO_Colombia_V0.8_09012018
GSM / (E)GPRS Transfer Class B – EUT cannot support Packet Switched and Circuit Switched Network
mode
simultaneously but can automatically switch between Packet and Circuit Switched Network.
EUT Stage
Identical Prototype
Remark:
1. This device does not support DTM operation and support GRPS mode up to multi-slot class 12.
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 6 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
5. RF Exposure Limits
5.1 Uncontrolled Environment
Uncontrolled Environments are defined as locations where there is the exposure of individuals who have no knowledge or
control of their exposure. The general population/uncontrolled exposure limits are applicable to situations in which the
general public may be exposed or in which persons who are exposed as a consequence of their employment may not be
made fully aware of the potential for exposure or cannot exercise control over their exposure. Members of the general
public would come under this category when exposure is not employment-related; for example, in the case of a wireless
transmitter that exposes persons in its vicinity.
5.2 Controlled Environment
Controlled Environments are defined as locations where there is exposure that may be incurred by persons who are
aware of the potential for exposure, (i.e. as a result of employment or occupation). In general, occupational/controlled
exposure limits are applicable to situations in which persons are exposed as a consequence of their employment, who
have been made fully aware of the potential for exposure and can exercise control over their exposure. The exposure
category is also applicable when the exposure is of a transient nature due to incidental passage through a location where
the exposure levels may be higher than the general population/uncontrolled limits, but the exposed person is fully aware
of the potential for exposure and can exercise control over his or her exposure by leaving the area or by some other
appropriate means.
Limits for Occupational/Controlled Exposure (W/kg)
Limits for General Population/Uncontrolled Exposure (W/kg)
1.
Whole-Body SAR is averaged over the entire body, partial-body SAR is averaged over any 1gram of tissue
defined as a tissue volume in the shape of a cube. SAR for hands, wrists, feet and ankles is averaged over any
10 grams of tissue defined as a tissue volume in the shape of a cube.
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 7 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
6. Specific Absorption Rate (SAR)
6.1 Introduction
SAR is related to the rate at which energy is absorbed per unit mass in an object exposed to a radio field. The SAR
distribution in a biological body is complicated and is usually carried out by experimental techniques or numerical
modeling. The standard recommends limits for two tiers of groups, occupational/controlled and general
population/uncontrolled, based on a person’s awareness and ability to exercise control over his or her exposure. In
general, occupational/controlled exposure limits are higher than the limits for general population/uncontrolled.
6.2 SAR Definition
The SAR definition is the time derivative (rate) of the incremental energy (dW) absorbed by (dissipated in) an
incremental mass (dm) contained in a volume element (dv) of a given density (ρ). The equation description is as
below:
𝐒𝐀𝐑 =
𝐝 𝐝𝐖
𝐝 𝐝𝐖
)= (
𝐝𝐭 𝐝𝐦
𝐝𝐭 𝛒𝐝𝐯
SAR is expressed in units of Watts per kilogram (W/kg)
𝛔|𝐄|𝟐
𝐒𝐀𝐑 =
𝛒
Where: σ is the conductivity of the tissue, ρ is the mass density of the tissue and E is the RMS electrical field strength.
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 8 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
7. System Description and Setup
The DASY system used for performing compliance tests consists of the following items:









A standard high precision 6-axis robot with controller, teach pendant and software. An arm extension for
accommodating the data acquisition electronics (DAE).
An isotropic Field probe optimized and calibrated for the targeted measurement.
A data acquisition electronics (DAE) which performs the signal amplification, signal multiplexing,
AD-conversion, offset measurements, mechanical surface detection, collision detection, etc. The unit is
battery powered with standard or rechargeable batteries. The signal is optically transmitted to the EOC.
The Electro-optical converter (EOC) performs the conversion from optical to electrical signals for the
digital communication to the DAE. To use optical surface detection, a special version of the EOC is
required. The EOC signal is transmitted to the measurement server.
The function of the measurement server is to perform the time critical tasks such as signal filtering,
control of the robot operation and fast movement interrupts.
The Light Beam used is for probe alignment. This improves the (absolute) accuracy of the probe
positioning.
A computer running WinXP or Win7 and the DASY5 software.
Remote control and teach pendant as well as additional circuitry for robot safety such as warning lamps,
etc.
The phantom, the device holder and other accessories according to the targeted measurement.
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 9 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
7.1 E-Field Probe
Report No. : FA871604
The SAR measurement is conducted with the dosimetric probe (manufactured by SPEAG).The probe is specially
designed and calibrated for use in liquid with high permittivity. The dosimetric probe has special calibration in liquid at
different frequency. This probe has a built in optical surface detection system to prevent from collision with phantom.

Construction
Frequency
Directivity
Dynamic Range
Dimensions
Symmetric design with triangular core
Built-in shielding against static charges
PEEK enclosure material (resistant to organic
solvents, e.g., DGBE)
10 MHz – >6 GHz
Linearity: ±0.2 dB (30 MHz – 6 GHz)
Âą0.3 dB in TSL (rotation around probe axis)
Âą0.5 dB in TSL (rotation normal to probe axis)
10 µW/g – >100 mW/g
Linearity: Âą0.2 dB (noise: typically <1 ÂľW/g)
Overall length: 337 mm (tip: 20 mm)
Tip diameter: 2.5 mm (body: 12 mm)
Typical distance from probe tip to dipole centers: 1
mm
7.2 Data Acquisition Electronics (DAE)
The data acquisition electronics (DAE) consists of a highly sensitive
electrometer-grade
preamplifier
with
auto-zeroing,
channel
and
gain-switching multiplexer, a fast 16 bit AD-converter and a command
decoder and control logic unit. Transmission to the measurement server is
accomplished through an optical downlink for data and status information as
well as an optical uplink for commands and the clock.
The input impedance of the DAE is 200 MOhm; the inputs are symmetrical
and floating. Common mode rejection is above 80 dB.
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Fig 5.1
Page 10 of 36
Photo of DAE
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
7.3 Phantom
Report No. : FA871604

Shell Thickness
Filling Volume
Dimensions
Measurement Areas
2 Âą 0.2 mm;
Center ear point: 6 Âą 0.2 mm
Approx. 25 liters
Length: 1000 mm; Width: 500 mm; Height:
adjustable feet
Left Hand, Right Hand, Flat Phantom
The bottom plate contains three pair of bolts for locking the device holder. The device holder positions are adjusted to the
standard measurement positions in the three sections. A white cover is provided to tap the phantom during off-periods to
prevent water evaporation and changes in the liquid parameters. On the phantom top, three reference markers are
provided to identify the phantom position with respect to the robot.

Shell Thickness
Filling Volume
Dimensions
2 Âą 0.2 mm (sagging: <1%)
Approx. 30 liters
Major ellipse axis: 600 mm
Minor axis: 400 mm
The ELI phantom is intended for compliance testing of handheld and body-mounted wireless devices in the frequency
range of 30 MHz to 6 GHz. ELI4 is fully compatible with standard and all known tissue simulating liquids.
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 11 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
7.4 Device Holder
Report No. : FA871604

In combination with the Twin SAM V5.0/V5.0c or ELI phantoms, the Mounting Device for Hand-Held Transmitters enables
rotation of the mounted transmitter device to specified spherical coordinates. At the heads, the rotation axis is at the ear
opening. Transmitter devices can be easily and accurately positioned according to IEC 62209-1, IEEE 1528, FCC, or
other specifications. The device holder can be locked for positioning at different phantom sections (left head, right head,
flat). And upgrade kit to Mounting Device to enable easy mounting of wider devices like big smart-phones, e-books, small
tablets, etc. It holds devices with width up to 140 mm.
Mounting Device for Hand-Held
Transmitters
Mounting Device Adaptor for Wide-Phones

The extension is lightweight and made of POM, acrylic glass and foam. It fits easily on the upper part of the mounting
device in place of the phone positioned. The extension is fully compatible with the SAM Twin and ELI phantoms.
Mounting Device for Laptops
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 12 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
8. Measurement Procedures
The measurement procedures are as follows:

(a) For WWAN power measurement, use base station simulator to configure EUT WWAN transmission in conducted
connection with RF cable, at maximum power in each supported wireless interface and frequency band.
(b) Read the WWAN RF power level from the base station simulator.
(c) For WLAN/BT power measurement, use engineering software to configure EUT WLAN/BT continuously
transmission, at maximum RF power in each supported wireless interface and frequency band
(d) Connect EUT RF port through RF cable to the power meter, and measure WLAN/BT output power

(a) Use base station simulator to configure EUT WWAN transmission in radiated connection, and engineering
software to configure EUT WLAN/BT continuously transmission, at maximum RF power, in the highest power
channel.
(b) Place the EUT in the positions as Appendix D demonstrates.
(c) Set scan area, grid size and other setting on the DASY software.
(d) Measure SAR results for the highest power channel on each testing position.
(e) Find out the largest SAR result on these testing positions of each band
(f) Measure SAR results for other channels in worst SAR testing position if the reported SAR of highest power
channel is larger than 0.8 W/kg
According to the test standard, the recommended procedure for assessing the peak spatial-average SAR value
consists of the following steps:
(a)
(b)
(c)
(d)
Power reference measurement
Area scan
Zoom scan
Power drift measurement
8.1 Spatial Peak SAR Evaluation
The procedure for spatial peak SAR evaluation has been implemented according to the test standard. It can be
conducted for 1g and 10g, as well as for user-specific masses. The DASY software includes all numerical
procedures necessary to evaluate the spatial peak SAR value.
The base for the evaluation is a "cube" measurement. The measured volume must include the 1g and 10g cubes
with the highest averaged SAR values. For that purpose, the center of the measured volume is aligned to the
interpolated peak SAR value of a previously performed area scan.
The entire evaluation of the spatial peak values is performed within the post-processing engine (SEMCAD). The
system always gives the maximum values for the 1g and 10g cubes. The algorithm to find the cube with highest
averaged SAR is divided into the following stages:
(a)
(b)
(c)
(d)
(e)
(f)
Extraction of the measured data (grid and values) from the Zoom Scan
Calculation of the SAR value at every measurement point based on all stored data (A/D values and
measurement parameters)
Generation of a high-resolution mesh within the measured volume
Interpolation of all measured values form the measurement grid to the high-resolution grid
Extrapolation of the entire 3-D field distribution to the phantom surface over the distance from sensor to surface
Calculation of the averaged SAR within masses of 1g and 10g
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 13 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
8.2 Power Reference Measurement
Report No. : FA871604
The Power Reference Measurement and Power Drift Measurements are for monitoring the power drift of the device under
test in the batch process. The minimum distance of probe sensors to surface determines the closest measurement point
to phantom surface. This distance cannot be smaller than the distance of sensor calibration points to probe tip as defined
in the probe properties.
8.3 Area Scan
The area scan is used as a fast scan in two dimensions to find the area of high field values, before doing a fine
measurement around the hot spot. The sophisticated interpolation routines implemented in DASY software can find the
maximum found in the scanned area, within a range of the global maximum. The range (in dB0 is specified in the
standards for compliance testing. For example, a 2 dB range is required in IEEE standard 1528 and IEC 62209 standards,
whereby 3 dB is a requirement when compliance is assessed in accordance with the ARIB standard (Japan), if only one
zoom scan follows the area scan, then only the absolute maximum will be taken as reference. For cases where multiple
maximums are detected, the number of zoom scans has to be increased accordingly.
Area scan parameters extracted from FCC KDB 865664 D01v01r04 SAR measurement 100 MHz to 6 GHz.
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 14 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
8.4 Zoom Scan
Report No. : FA871604
Zoom scans are used assess the peak spatial SAR values within a cubic averaging volume containing 1 gram and 10
gram of simulated tissue. The zoom scan measures points (refer to table below) within a cube shoes base faces are
centered on the maxima found in a preceding area scan job within the same procedure. When the measurement is done,
the zoom scan evaluates the averaged SAR for 1 gram and 10 gram and displays these values next to the job’s label.
Zoom scan parameters extracted from FCC KDB 865664 D01v01r04 SAR measurement 100 MHz to 6 GHz.
8.5 Volume Scan Procedures
The volume scan is used for assess overlapping SAR distributions for antennas transmitting in different frequency bands.
It is equivalent to an oversized zoom scan used in standalone measurements. The measurement volume will be used to
enclose all the simultaneous transmitting antennas. For antennas transmitting simultaneously in different frequency bands,
the volume scan is measured separately in each frequency band. In order to sum correctly to compute the 1g aggregate
SAR, the EUT remain in the same test position for all measurements and all volume scan use the same spatial resolution
and grid spacing. When all volume scan were completed, the software, SEMCAD postprocessor can combine and
subsequently superpose these measurement data to calculating the multiband SAR.
8.6 Power Drift Monitoring
All SAR testing is under the EUT install full charged battery and transmit maximum output power. In DASY measurement
software, the power reference measurement and power drift measurement procedures are used for monitoring the power
drift of EUT during SAR test. Both these procedures measure the field at a specified reference position before and after
the SAR testing. The software will calculate the field difference in dB. If the power drifts more than 5%, the SAR will be
retested.
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 15 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
9. Test Equipment List
Manufacturer
Name of Equipment
Type/Model
Serial Number
SPEAG
835MHz System Validation Kit
D835V2
SPEAG
1900MHz System Validation Kit
SPEAG
Calibration
Last Cal.
Due Date
4d162
Dec. 05, 2017
Dec. 04, 2018
D1900V2
5d182
Dec. 06, 2017
Dec. 05, 2018
Data Acquisition Electronics
DAE4
1303
Dec. 19, 2017
Dec. 18, 2018
SPEAG
Dosimetric E-Field Probe
EX3DV4
3958
Jan. 11, 2018
Jan. 10, 2019
SPEAG
SAM Twin Phantom
SAM V5.0
1795
NCR
NCR
SPEAG
Phone Positioner
N/A
N/A
NCR
NCR
Anritsu
Radio communication analyzer
MT8820C
6201300653
Jul. 18, 2018
Jul. 17, 2019
Agilent
Wireless Communication Test Set
E5515C
MY50267224
Sep. 12, 2017
Sep. 11, 2018
Agilent
Network Analyzer
E5071C
MY46523671
Oct. 18, 2017
Oct. 17, 2018
Speag
Dielectric Assessment KIT
DAK-3.5
1071
Nov. 28, 2017
Nov. 27, 2018
Agilent
Signal Generator
N5181A
MY50145381
Dec. 26, 2017
Dec. 25, 2018
Anritsu
Power Senor
MA2411B
1306099
Jul. 30, 2018
Jul. 29, 2019
Anritsu
Power Meter
ML2495A
1349001
Jul. 26, 2018
Jul. 25, 2019
LKM electronic
Hygrometer
DTM3000
3241
Aug. 10, 2018
Aug. 09, 2019
Anymetre
Thermo-Hygrometer
JR593
2015102801
Jan. 01, 2018
Dec. 31, 2018
ARRA
Power Divider
A3200-2
N/A
Note 1
PASTERNACK
Dual Directional Coupler
PE2214-10
N/A
Note 1
Agilent
Dual Directional Coupler
778D
50422
Note 1
MCL
Attenuation1
BW-S10W5
N/A
Note 1
Weinschel
Attenuation2
3M-20
N/A
Note 1
Zhongjilianhe
Attenuation3
MVE2214-03
N/A
Note 1
mini-circuits
Amplifier
ZHL-42W+
QA1341002
Note 1
mini-circuits
Amplifier
ZVE-3W-83+
599201528
Note 1
General Note:
1.
Prior to system verification and validation, the path loss from the signal generator to the system check source and
the power meter, which includes the amplifier, cable, attenuator and directional coupler, was measured by the
network analyzer. The reading of the power meter was offset by the path loss difference between the path to the
power meter and the path to the system check source to monitor the actual power level fed to the system check
source.
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 16 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
10. System Verification
10.1 Tissue Simulating Liquids
For the measurement of the field distribution inside the SAM phantom with DASY, the phantom must be
filled with around 25 liters of homogeneous body tissue simulating liquid. For head SAR testing, the liquid
height from the ear reference point (ERP) of the phantom to the liquid top surface is larger than 15 cm,
which is shown in Fig. 10.1. For body SAR testing, the liquid height from the center of the flat phantom to
the liquid top surface is larger than 15 cm, which is shown in Fig. 10.2.
Fig 10.1Photo of Liquid Height for Head SAR
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Fig 10.2 Photo of Liquid Height for Body SAR
Page 17 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
10.2 Tissue Verification
Report No. : FA871604
The following tissue formulations are provided for reference only as some of the parameters have not been
thoroughly verified. The composition of ingredients may be modified accordingly to achieve the desired target
tissue parameters required for routine SAR evaluation.
Frequency
(MHz)
Water
(%)
Sugar
(%)
Cellulose
(%)
835
1800, 1900, 2000
40.3
55.2
57.9
0.2
835
1800, 1900, 2000
50.8
70.2
48.2
Salt
(%)
For Head
1.4
0.3
For Body
0.9
0.4
Preventol
(%)
DGBE
(%)
Conductivity
(σ)
Permittivity
(Îľr)
0.2
44.5
0.90
1.40
41.5
40.0
0.1
29.4
0.97
1.52
55.2
53.3

Frequency
(MHz)
Tissue
Type
Liquid
Temp.
(℃)
Conductivity
(σ)
Permittivity
(Îľr)
Conductivity
Target (σ)
Permittivity
Target (Îľr)
Delta
(σ)
(%)
Delta
(Îľr)
(%)
Limit
(%)
Date
835
Head
22.6
0.904
41.212
0.90
41.50
0.44
-0.69
Âą5
2018/8/31
1900
Head
22.7
1.440
40.038
1.40
40.00
2.86
0.09
Âą5
2018/8/30
835
Body
22.7
1.011
56.243
0.97
55.20
4.23
1.89
Âą5
2018/8/31
1900
Body
22.9
1.535
54.579
1.52
53.30
0.99
2.40
Âą5
2018/8/31
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 18 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
10.3 System Performance Check Results
Report No. : FA871604
Comparing to the original SAR value provided by SPEAG, the verification data should be within its specification of 10 %.
Below table shows the target SAR and measured SAR after normalized to 1W input power. The table below indicates the
system performance check can meet the variation criterion and the plots can be referred to Appendix A of this report.
Date
Frequency
(MHz)
Tissue
Type
Input
Power
(mW)
Dipole
S/N
Probe
S/N
DAE
S/N
Measured
1g SAR
(W/kg)
Targeted
1g SAR
(W/kg)
Normalized
1g SAR
(W/kg)
Deviation
(%)
2018/8/31
835
Head
250
4d162
3958
1303
2.48
9.56
9.92
3.77
2018/8/30
1900
Head
250
5d182
3958
1303
9.62
40.10
38.48
-4.04
2018/8/31
835
Body
250
4d162
3958
1303
2.37
9.56
9.48
-0.84
2018/8/31
1900
Body
250
5d182
3958
1303
9.89
40.40
39.56
-2.08
Fig 8.3.1 System Performance Check Setup
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Fig 8.3.2 Setup Photo
Page 19 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
11. RF Exposure Positions
11.1 Ear and handset reference point
Figure 9.1.1 shows the front, back, and side views of the SAM phantom. The center-of-mouth reference point
is labeled “M,” the left ear reference point (ERP) is marked “LE,” and the right ERP is marked “RE.” Each ERP
is 15 mm along the B-M (back-mouth) line behind the entrance-to-ear-canal (EEC) point, as shown in Figure
9.1.2 The Reference Plane is defined as passing through the two ear reference points and point M. The line
N-F (neck-front), also called the reference pivoting line, is normal to the Reference Plane and perpendicular to
both a line passing through RE and LE and the B-M line (see Figure 9.1.3). Both N-F and B-M lines should be
marked on the exterior of the phantom shell to facilitate handset positioning. Posterior to the N-F line the ear
shape is a flat surface with 6 mm thickness at each ERP, and forward of the N-F line the ear is truncated, as
illustrated in Figure 9.1.2. The ear truncation is introduced to preclude the ear lobe from interfering with
handset tilt, which could lead to unstable positioning at the cheek.
Fig 9.1.1 Front, back, and side views of SAM twin phantom
Fig 9.1.2 Close-up side view of phantom showing the
ear region.
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Fig 9.1.3 Side view of the phantom showing relevant
markings and seven cross-sectional plane locations
Page 20 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
11.2 Definition of the cheek position
1.
2.
3.
4.
5.
6.
7.
Report No. : FA871604
Ready the handset for talk operation, if necessary. For example, for handsets with a cover piece (flip cover), open the
cover. If the handset can transmit with the cover closed, both configurations must be tested.
Define two imaginary lines on the handset—the vertical centerline and the horizontal line. The vertical centerline
passes through two points on the front side of the handset—the midpoint of the width wt of the handset at the level of
the acoustic output (point A in Figure 9.2.1 and Figure 9.2.2), and the midpoint of the width wb of the bottom of the
handset (point B). The horizontal line is perpendicular to the vertical centerline and passes through the center of the
acoustic output (see Figure 9.2.1). The two lines intersect at point A. Note that for many handsets, point A coincides
with the center of the acoustic output; however, the acoustic output may be located elsewhere on the horizontal line.
Also note that the vertical centerline is not necessarily parallel to the front face of the handset (see Figure 9.2.2),
especially for clamshell handsets, handsets with flip covers, and other irregularly-shaped handsets.
Position the handset close to the surface of the phantom such that point A is on the (virtual) extension of the line
passing through points RE and LE on the phantom (see Figure 9.2.3), such that the plane defined by the vertical
centerline and the horizontal line of the handset is approximately parallel to the sagittal plane of the phantom.
Translate the handset towards the phantom along the line passing through RE and LE until handset point A touches
the pinna at the ERP.
While maintaining the handset in this plane, rotate it around the LE-RE line until the vertical centerline is in the plane
normal to the plane containing B-M and N-F lines, i.e., the Reference Plane.
Rotate the handset around the vertical centerline until the handset (horizontal line) is parallel to the N-F line.
While maintaining the vertical centerline in the Reference Plane, keeping point A on the line passing through RE and
LE, and maintaining the handset contact with the pinna, rotate the handset about the N-F line until any point on the
handset is in contact with a phantom point below the pinna on the cheek. See Figure 9.2.3. The actual rotation angles
should be documented in the test report.
Fig 9.2.1 Handset vertical and horizontal
reference lines—“fixed case
Fig 9.2.2 Handset vertical and horizontal reference
lines—“clam-shell case”
Fig 9.2.3 cheek or touch position. The reference points for the right ear (RE), left ear (LE), and mouth (M), which
establish the Reference Plane for handset positioning, are indicated.
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 21 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
11.3 Definition of the tilt position
1.
2.
3.
4.
Report No. : FA871604
Ready the handset for talk operation, if necessary. For example, for handsets with a cover piece (flip cover), open the
cover. If the handset can transmit with the cover closed, both configurations must be tested.
While maintaining the orientation of the handset, move the handset away from the pinna along the line passing
through RE and LE far enough to allow a rotation of the handset away from the cheek by 15°.
Rotate the handset around the horizontal line by 15°.
While maintaining the orientation of the handset, move the handset towards the phantom on the line passing through
RE and LE until any part of the handset touches the ear. The tilt position is obtained when the contact point is on the
pinna. See Figure 9.3.1. If contact occurs at any location other than the pinna, e.g., the antenna at the back of the
phantom head, the angle of the handset should be reduced. In this case, the tilt position is obtained if any point on the
handset is in contact with the pinna and a second point
Fig 9.3.1 Tilt position. The reference points for the right ear (RE), left ear (LE), and mouth (M), which define the
Reference Plane for handset positioning, are indicated.
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 22 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
11.4 Body Worn Accessory
Report No. : FA871604
Body-worn operating configurations are tested with the belt-clips and holsters attached to the device and positioned
against a flat phantom in a normal use configuration (see Figure 9.4). Per KDB648474 D04v01r03, body-worn accessory
exposure is typically related to voice mode operations when handsets are carried in body-worn accessories. The
body-worn accessory procedures in FCC KDB 447498 D01v06 should be used to test for body-worn accessory SAR
compliance, without a headset connected to it. This enables the test results for such configuration to be compatible with
that required for hotspot mode when the body-worn accessory test separation distance is greater than or equal to that
required for hotspot mode, when applicable. When the reported SAR for body-worn accessory, measured without a
headset connected to the handset is > 1.2 W/kg, the highest reported SAR configuration for that wireless mode and
frequency band should be repeated for that body-worn accessory with a handset attached to the handset.
Accessories for body-worn operation configurations are divided into two categories: those that do not contain metallic
components and those that do contain metallic components and those that do contain metallic components. When
multiple accessories that do not contain metallic components are supplied with the device, the device is tested with only
the accessory that dictates the closest spacing to the body. Then multiple accessories that contain metallic components
are test with the device with each accessory. If multiple accessories share an identical metallic component (i.e. the same
metallic belt-chip used with different holsters with no other metallic components) only the accessory that dictates the
closest spacing to the body is tested.
Fig 9.4 Body Worn Position
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 23 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
12. Conducted RF Output Power (Unit: dBm)

General Note:
1.
Per KDB 447498 D01v06, the maximum output power channel is used for SAR testing and for further SAR test
reduction.
2.
Per KDB 941225 D01v03r01, GSM Voice for GSM850/GSM1900 is chosen to perform head/body-worn SAR
testing.
GSM850
Burst Average Power (dBm)
Tune-up
Limit
(dBm)
Tx Channel
128
189
251
Frequency (MHz)
824.2
836.4
848.8
GSM 1 Tx slot
31.42
31.30
30.99
32.00
GPRS 1 Tx slot
31.40
31.28
30.96
GPRS 2 Tx slots
30.42
30.28
GPRS 3 Tx slots
28.31
28.20
GPRS 4 Tx slots
26.22
26.10
GSM1900
512
Frequency (MHz)
GSM 1 Tx slot
Tune-up
Limit
(dBm)
128
189
251
824.2
836.4
848.8
22.42
22.30
21.99
23.00
32.00
22.40
22.28
21.96
23.00
30.05
31.00
24.42
24.28
24.05
25.00
27.92
28.50
24.05
23.94
23.66
24.24
26.08
26.50
23.22
23.10
23.08
23.50
Burst Average Power (dBm)
Tx Channel
Frame-Average Power (dBm)
1909.8
Tune-up
Limit
(dBm)
29.83
30.00
661
810
1850.2
1880
29.73
29.39
Frame-Average Power (dBm)
661
810
1850.2
1880
1909.8
Tune-up
Limit
(dBm)
20.73
20.39
20.83
21.00
512
GPRS 1 Tx slot
29.71
29.37
29.81
30.00
20.71
20.37
20.81
21.00
GPRS 2 Tx slots
27.05
27.12
27.27
27.50
21.05
21.12
21.27
21.50
GPRS 3 Tx slots
25.36
25.40
25.43
26.00
21.10
21.14
21.17
21.74
GPRS 4 Tx slots
23.18
23.20
23.26
23.50
20.18
20.20
Remark: The frame-averaged power is linearly scaled the maximum burst averaged power over 8 time slots.
The calculated method are shown as below:
Frame-averaged power = Maximum burst averaged power (1 Tx Slot) - 9 dB
Frame-averaged power = Maximum burst averaged power (2 Tx Slots) - 6 dB
Frame-averaged power = Maximum burst averaged power (3 Tx Slots) - 4.26 dB
Frame-averaged power = Maximum burst averaged power (4 Tx Slots) - 3 dB
20.26
20.50
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 24 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604

1. The following tests were conducted according to the test requirements outlines in 3GPP TS 34.121 specification.
2. The procedures in KDB 941225 D01v03r01 are applied for 3GPP Rel. 6 HSPA to configure the device in the required
sub-test mode(s) to determine SAR test exclusion.
A summary of these settings are illustrated below:
HSDPA Setup Configuration:
a. The EUT was connected to Base Station Agilent E5515C referred to the Setup Configuration.
b. The RF path losses were compensated into the measurements.
c.
A call was established between EUT and Base Station with following setting:
i.
Set Gain Factors (βc and βd) and parameters were set according to each
ii. Specific sub-test in the following table, C10.1.4, quoted from the TS 34.121
iii. Set RMC 12.2Kbps + HSDPA mode.
iv. Set Cell Power = -86 dBm
v. Set HS-DSCH Configuration Type to FRC (H-set 1, QPSK)
vi. Select HSDPA Uplink Parameters
vii. Set Delta ACK, Delta NACK and Delta CQI = 8
viii. Set Ack-Nack Repetition Factor to 3
ix. Set CQI Feedback Cycle (k) to 4 ms
x. Set CQI Repetition Factor to 2
xi. Power Ctrl Mode = All Up bits
d. The transmitted maximum output power was recorded.
Setup Configuration
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 25 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
HSUPA Setup Configuration:
a. The EUT was connected to Base Station Agilent E5515C referred to the Setup Configuration.
b. The RF path losses were compensated into the measurements.
c. A call was established between EUT and Base Station with following setting * :
i. Call Configs = 5.2B, 5.9B, 5.10B, and 5.13.2B with QPSK
ii. Set the Gain Factors (βc and βd) and parameters (AG Index) were set according to each specific sub-test in
the following table, C11.1.3, quoted from the TS 34.121
iii. Set Cell Power = -86 dBm
iv. Set Channel Type = 12.2k + HSPA
v. Set UE Target Power
vi. Power Ctrl Mode= Alternating bits
vii. Set and observe the E-TFCI
viii. Confirm that E-TFCI is equal to the target E-TFCI of 75 for sub-test 1, and other subtest’s E-TFCI
d. The transmitted maximum output power was recorded.
Setup Configuration
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 26 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604

General Note:
1.
Per KDB 941225 D01v03r01, for SAR testing is measured using a 12.2 kbps RMC with TPC bits configured to all
“1’s”.
2.
Per KDB 941225 D01v03r01, RMC 12.2kbps setting is used to evaluate SAR. The maximum output power and
tune-up tolerance specified for production units in HSDPA / HSUPA is ≤ ¼ dB higher than RMC 12.2Kbps or when
the highest reported SAR of the RMC12.2Kbps is scaled by the ratio of specified maximum output power and
tune-up tolerance of HSDPA / HSUPA to RMC12.2Kbps and the adjusted SAR is ≤ 1.2 W/kg, SAR measurement is
not required for HSDPA / HSUPA, and according to the following RF output power, the output power results of the
secondary modes (HSUPA, HSDPA) are less than Âź dB higher than the primary modes; therefore, SAR
measurement is not required for HSDPA / HSUPA.
Band
Tx Channel
WCDMA Band II
WCDMA Band V
9262
9400
9538
Rx Channel
9662
9800
9938
Frequency (MHz)
1852.4
1880
1907.6
Tune-up
Limit
(dBm)
4132
4182
4233
4357
4407
4458
826.4
836.4
846.6
Tune-up
Limit
(dBm)
3GPP Rel 99
AMR 12.2Kbps
23.82
23.79
23.79
24.00
23.15
23.07
23.09
23.50
3GPP Rel 99
RMC 12.2Kbps
23.83
23.81
23.80
24.00
23.16
23.09
23.10
23.50
3GPP Rel 6
HSDPA Subtest-1
22.40
22.50
22.35
23.00
21.63
21.67
21.62
22.50
3GPP Rel 6
HSDPA Subtest-2
22.30
22.43
22.28
23.00
21.73
21.62
21.72
22.50
3GPP Rel 6
HSDPA Subtest-3
22.28
22.43
22.30
22.50
21.71
21.66
21.76
22.00
3GPP Rel 6
HSDPA Subtest-4
22.23
22.39
22.22
22.50
21.69
21.62
21.73
22.00
3GPP Rel 6
HSUPA Subtest-1
21.19
21.05
21.04
23.00
19.73
19.75
20.15
22.50
3GPP Rel 6
HSUPA Subtest-2
21.48
21.67
21.43
22.00
20.51
20.46
20.23
21.50
3GPP Rel 6
HSUPA Subtest-3
21.72
21.55
21.45
22.00
20.62
20.59
20.61
21.50
3GPP Rel 6
HSUPA Subtest-4
21.69
21.66
21.69
22.00
20.74
20.77
20.49
22.50
3GPP Rel 6
HSUPA Subtest-5
22.80
22.70
22.60
23.00
21.80
21.70
21.80
22.50
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 27 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
13. Bluetooth Exclusions Applied
Max Average power(dBm)
Mode Band
BR/EDR
2.4GHz Bluetooth
6.0
Note:
1. Per KDB 447498 D01v06, the 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation
distances ≤ 50 mm are determined by:
[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for
1-g SAR and ≤ 7.5 for 10-g extremity SAR
‧
f(GHz) is the RF channel transmit frequency in GHz
‧
Power and distance are rounded to the nearest mW and mm before calculation
‧
The result is rounded to one decimal place for comparison
Bluetooth Max Power (dBm)
Separation Distance (mm)
Frequency (GHz)
exclusion thresholds
6.0
2.48
1.3
Note:
Per KDB 447498 D01v06, when the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to
determine SAR test exclusion. The test exclusion threshold is 1.3 which is <= 3, SAR testing is not required.
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 28 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
14. Antenna Location
Top Side
47mm
Camera
BT Antenna
118mm
114mm
Right Side
Left Side
WWAN Antenna
Bottom Side
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 29 of 36
Back View
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
15. SAR Test Results
General Note:
1.
Per KDB 447498 D01v06, the reported SAR is the measured SAR value adjusted for maximum tune-up tolerance.
a. Tune-up scaling Factor = tune-up limit power (mW) / EUT RF power (mW), where tune-up limit is the maximum rated
power among all production units.
b. For WWAN: Reported SAR(W/kg)= Measured SAR(W/kg)*Tune-up Scaling Factor
2. Per KDB 447498 D01v06, for each exposure position, testing of other required channels within the operating mode of a
frequency band is not required when the reported 1-g or 10-g SAR for the mid-band or highest output power channel is:
‧
≤ 0.8 W/kg or 2.0 W/kg, for 1-g or 10-g respectively, when the transmission band is ≤ 100 MHz
‧
≤ 0.6 W/kg or 1.5 W/kg, for 1-g or 10-g respectively, when the transmission band is between 100 MHz and 200 MHz
‧
≤ 0.4 W/kg or 1.0 W/kg, for 1-g or 10-g respectively, when the transmission band is ≥ 200 MHz
3. Per KDB 865664 D01v01r04, for each frequency band, repeated SAR measurement is required only when the measured
SAR is ≥0.8W/kg.
4. Per KDB 648474 D04v01r03, when the reported SAR for a body-worn accessory measured without a headset connected to
the handset is ≤ 1.2 W/kg, SAR testing with a headset connected to the handset is not required.
GSM Note:
1.
Per KDB 941225 D01v03r01, GSM Voice for GSM850/GSM1900 is chosen to perform head/body-worn SAR testing.
UMTS Note:
1. Per KDB 941225 D01v03r01, for SAR testing is measured using a 12.2 kbps RMC with TPC bits configured to all “1’s”.
2. Per KDB 941225 D01v03r01, RMC 12.2kbps setting is used to evaluate SAR. The maximum output power and tune-up
tolerance specified for production units in HSDPA / HSUPA is ≤ ¼ dB higher than RMC 12.2Kbps or when the highest
reported SAR of the RMC12.2Kbps is scaled by the ratio of specified maximum output power and tune-up tolerance of
HSDPA / HSUPA to RMC12.2Kbps and the adjusted SAR is ≤ 1.2 W/kg, SAR measurement is not required for HSDPA /
HSUPA, and according to the following RF output power, the output power results of the secondary modes (HSUPA, HSDPA)
are less than Âź dB higher than the primary modes; therefore, SAR measurement is not required for HSDPA / HSUPA .
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 30 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
15.1 Head SAR
Report No. : FA871604

Band
Mode
Test
Position
Ch.
Freq.
(MHz)
Average
Power
(dBm)
Tune-Up
Limit
(dBm)
Tune-up
Scaling
Factor
Power
Drift
(dB)
Measured
1g SAR
(W/kg)
Reported
1g SAR
(W/kg)
GSM850
GSM Voice
Right Cheek
128
824.2
31.42
32.00
1.143
0.05
0.638
0.729
GSM850
GSM Voice
Right Tilted
128
824.2
31.42
32.00
1.143
0.03
0.476
0.544
01
GSM850
GSM Voice
Left Cheek
128
824.2
31.42
32.00
1.143
-0.02
0.654
0.747
GSM850
GSM Voice
Left Tilted
128
824.2
31.42
32.00
1.143
0.02
0.407
0.465
02
GSM1900
GSM Voice
Right Cheek
810
1909.8
29.83
30.00
1.040
0.07
0.186
0.193
GSM1900
GSM Voice
Right Tilted
810
1909.8
29.83
30.00
1.040
0.02
0.176
0.183
GSM1900
GSM Voice
Left Cheek
810
1909.8
29.83
30.00
1.040
0.03
0.182
0.189
GSM1900
GSM Voice
Left Tilted
810
1909.8
29.83
30.00
1.040
-0.04
0.147
0.153
Plot
No.

Plot
No.
03
04
Band
Mode
Test
Position
Ch.
Freq.
(MHz)
Average
Power
(dBm)
Tune-Up
Limit
(dBm)
Tune-up
Scaling
Factor
Power
Drift
(dB)
Measured
1g SAR
(W/kg)
Reported
1g SAR
(W/kg)
WCDMA Band V
RMC 12.2Kbps
Right Cheek
4132
826.4
23.16
23.50
1.081
0.01
0.630
0.681
WCDMA Band V
RMC 12.2Kbps
Right Tilted
4132
826.4
23.16
23.50
1.081
0.05
0.396
0.428
WCDMA Band V
RMC 12.2Kbps
Left Cheek
4132
826.4
23.16
23.50
1.081
-0.09
0.671
0.726
WCDMA Band V
RMC 12.2Kbps
Left Tilted
4132
826.4
23.16
23.50
1.081
0.12
0.481
0.520
WCDMA Band II
RMC 12.2Kbps
Right Cheek
9262
1852.4
23.83
24.00
1.040
0.08
0.453
0.471
WCDMA Band II
RMC 12.2Kbps
Right Tilted
9262
1852.4
23.83
24.00
1.040
0.05
0.421
0.438
WCDMA Band II
RMC 12.2Kbps
Left Cheek
9262
1852.4
23.83
24.00
1.040
-0.01
0.441
0.459
WCDMA Band II
RMC 12.2Kbps
Left Tilted
9262
1852.4
23.83
24.00
1.040
-0.05
0.254
0.264
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 31 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
15.2 Body Worn Accessory SAR
Report No. : FA871604

Plot
No.
05
06
Band
Mode
Test
Position
Gap
(mm)
Ch.
Freq.
(MHz)
Average
Power
(dBm)
Tune-Up
Limit
(dBm)
Tune-up
Scaling
Factor
Power
Drift
(dB)
Measured
1g SAR
(W/kg)
Reported
1g SAR
(W/kg)
GSM850
GSM Voice
Front
15
128
824.2
31.42
32.00
1.143
0.06
0.397
0.454
GSM850
GSM Voice
Back
15
128
824.2
31.42
32.00
1.143
0.02
0.709
0.810
GSM850
GSM Voice
Back
15
189
836.4
31.30
32.00
1.175
0.04
0.746
0.876
GSM850
GSM Voice
Back
15
251
848.8
30.99
32.00
1.262
0.09
0.853
1.076
GSM850
GSM Voice
Back
15
251
848.8
30.99
32.00
1.262
0.09
0.849
1.071
GSM1900
GSM Voice
Front
15
810
1909.8
29.83
30.00
1.040
0.05
0.114
0.119
GSM1900
GSM Voice
Back
15
810
1909.8
29.83
30.00
1.040
0.07
0.196
0.204

Plot
No.
07
08
Band
Mode
Test
Position
Gap
(mm)
Ch.
Freq.
(MHz)
Average
Power
(dBm)
Tune-Up
Limit
(dBm)
Tune-up
Scaling
Factor
Power
Drift
(dB)
Measured
1g SAR
(W/kg)
Reported
1g SAR
(W/kg)
WCDMA Band V
RMC 12.2Kbps
Front
15
4132
826.4
23.16
23.50
1.081
0.02
0.383
0.414
WCDMA Band V
RMC 12.2Kbps
Back
15
4132
826.4
23.16
23.50
1.081
0.07
0.635
0.687
WCDMA Band II
RMC 12.2Kbps
Front
15
9262
1852.4
23.83
24.00
1.040
0.04
0.224
0.233
WCDMA Band II
RMC 12.2Kbps
Back
15
9262
1852.4
23.83
24.00
1.040
0.01
0.330
0.343
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 32 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
16. Simultaneous Transmission Analysis
NO.
Mobile Phone
Simultaneous Transmission Configurations
Head
Body-worn
1.
GSM Voice + Bluetooth
Yes
Yes
2.
WCDMA+ Bluetooth
Yes
Yes
General Note:
1.
All licensed modes share the same antenna part and cannot transmit simultaneously.
2.
EUT will choose each GSM and WCDMA according to the network signal condition; therefore, they will not operate
simultaneously at any moment.
3.
The reported SAR summation is calculated based on the same configuration and test position.
4.
Per KDB 447498 D01v06, simultaneous transmission SAR is compliant if,
i) Scalar SAR summation < 1.6W/kg.
ii) SPLSR = (SAR1 + SAR2)^1.5 / (min. separation distance, mm), and the peak separation distance is determined
from the square root of [(x1-x2)2 + (y1-y2)2 + (z1-z2)2], where (x1, y1, z1) and (x2, y2, z2) are the coordinates of
the extrapolated peak SAR locations in the zoom scan.
iii) If SPLSR ≤ 0.04, simultaneously transmission SAR measurement is not necessary.
iv) Simultaneously transmission SAR measurement, and the reported multi-band SAR < 1.6W/kg.
5.
For simultaneous transmission analysis, Bluetooth SAR is estimated per KDB 447498 D01v06 based on the formula
below.
i) (max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHz)/x] W/kg
for test separation distances ≤ 50 mm; where x = 7.5 for 1-g SAR, and x = 18.75 for 10-g SAR.
ii) When the minimum separation distance is < 5mm, the distance is used 5mm to determine SAR test exclusion.
iii) 0.4 W/kg for 1-g SAR and 1.0 W/kg for 10-g SAR, when the test separation distances is > 50 mm.
Bluetooth
Max Power
Exposure Position
Head
Test separation
0 mm
15 mm
6.0 dBm
Estimated SAR (W/kg)
0.167 W/kg
0.056 W/kg
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 33 of 36
Body worn
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
16.1 Head Exposure Conditions
WWAN Band
Report No. : FA871604
WWAN
Bluetooth
1g SAR
(W/kg)
Estimated SAR
1g SAR
(W/kg)
Right Cheek
0.729
0.167
0.90
Right Tilted
0.544
0.167
0.71
Left Cheek
0.747
0.167
0.91
Left Tilted
0.465
0.167
0.63
Right Cheek
0.193
0.167
0.36
Right Tilted
0.183
0.167
0.35
Left Cheek
0.189
0.167
0.36
Exposure Position
GSM850
GSM
GSM1900
WCDMA V
WCDMA
WCDMA II
1+2
Summed
1g SAR (W/kg)
Left Tilted
0.153
0.167
0.32
Right Cheek
0.681
0.167
0.85
Right Tilted
0.428
0.167
0.60
Left Cheek
0.726
0.167
0.89
Left Tilted
0.520
0.167
0.69
Right Cheek
0.471
0.167
0.64
Right Tilted
0.438
0.167
0.61
Left Cheek
0.459
0.167
0.63
Left Tilted
0.264
0.167
0.43
16.2 Body-Worn Accessory Exposure Conditions
WWAN Band
WWAN
Bluetooth
1g SAR
(W/kg)
Estimated SAR
1g SAR
(W/kg)
Front
0.454
0.056
0.51
Back
1.076
0.056
1.13
Front
0.119
0.056
0.18
Back
0.204
0.056
0.26
Front
0.414
0.056
0.47
Back
0.687
0.056
0.74
Front
0.233
0.056
0.29
Back
0.343
0.056
0.40
Exposure Position
GSM850
GSM
GSM1900
WCDMA V
WCDMA
WCDMA II
1+2
Summed
1g SAR (W/kg)
Test Engineer: Long Liang
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 34 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
17. Uncertainty Assessment
Per KDB 865664 D01 SAR measurement 100MHz to 6GHz, when the highest measured 1-g SAR within a frequency
band is < 1.5 W/kg. The expanded SAR measurement uncertainty must be ≤ 30%, for a confidence interval of k = 2. If
these conditions are met, extensive SAR measurement uncertainty analysis described in IEEE Std 1528-2013 is not
required in SAR reports submitted for equipment approval. For this device, the highest measured 1-g SAR is less
1.5W/kg. Therefore, the measurement uncertainty table is not required in this report.
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 35 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Report No. : FA871604
18. References
[1]
FCC 47 CFR Part 2 “Frequency Allocations and Radio Treaty Matters; General Rules and
Regulations”
[2]
ANSI/IEEE Std. C95.1-1992, “IEEE Standard for Safety Levels with Respect to Human Exposure
to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz”, September 1992
[3]
IEEE Std. 1528-2013, “IEEE Recommended Practice for Determining the Peak Spatial-Average
Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices:
Measurement Techniques”, Sep 2013
[4]
SPEAG DASY System Handbook
[5]
FCC KDB 447498 D01 v06, “Mobile and Portable Device RF Exposure Procedures and
Equipment Authorization Policies”, Oct 2015
[6]
FCC KDB 648474 D04 v01r03, “SAR Evaluation Considerations for Wireless Handsets”, Oct
2015.
[7]
FCC KDB 941225 D01 v03r01, “3G SAR MEAUREMENT PROCEDURES”, Oct 2015
[8]
FCC KDB 865664 D01 v01r04, "SAR Measurement Requirements for 100 MHz to 6 GHz", Aug
2015.
[9]
FCC KDB 865664 D02 v01r02, “RF Exposure Compliance Reporting and Documentation
Considerations” Oct 2015.
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page 36 of 36
Issued Date : Sep. 21, 2018
Form version. : 170509
FCC SAR Test Report
Appendix A.
Report No. : FA871604
Plots of System Performance Check
The plots are shown as follows.
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page A1 of A1
Issued Date : Sep. 21, 2018
Form version. : 170125
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2018.08.31
System Check_Head_835MHz_180831
DUT: D835V2-SN:4d162
Communication System: UID 0, CW; Frequency: 835 MHz;Duty Cycle: 1:1
Medium: HSL_835_180831 Medium parameters used: f = 835 MHz; σ = 0.904 S/m; ξr = 41.212; ρ
= 1000 kg/m3
Ambient Temperature:23.5 ℃; Liquid Temperature:22.6 ℃
DASY5 Configuration:
- Probe: EX3DV4 - SN3958; ConvF(10.31, 10.31, 10.31); Calibrated: 2018.01.11;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1303; Calibrated: 2017.12.19
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331)
Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 3.12 W/kg
Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 59.54 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 3.72 W/kg
SAR(1 g) = 2.48 W/kg; SAR(10 g) = 1.63 W/kg
Maximum value of SAR (measured) = 3.15 W/kg
0 dB = 3.15 W/kg
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2018.08.30
System Check_Head_1900MHz_180830
DUT: D1900V2-SN:5d182
Communication System: UID 0, CW; Frequency: 1900 MHz;Duty Cycle: 1:1
Medium: HSL_1900_180830 Medium parameters used: f = 1900 MHz; σ = 1.44 S/m; ξr = 40.038; ρ
= 1000 kg/m3
Ambient Temperature:23.4 ℃; Liquid Temperature:22.7 ℃
DASY5 Configuration:
- Probe: EX3DV4 - SN3958; ConvF(8.43, 8.43, 8.43); Calibrated: 2018.01.11;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1303; Calibrated: 2017.12.19
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331)
Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 13.4 W/kg
Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 86.60 V/m; Power Drift = 0.05 dB
Peak SAR (extrapolated) = 17.5 W/kg
SAR(1 g) = 9.62 W/kg; SAR(10 g) = 4.97 W/kg
Maximum value of SAR (measured) = 13.5 W/kg
0 dB = 13.5 W/kg
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2018.08.31
System Check_Body_835MHz_180831
DUT: D835V2-SN:4d162
Communication System: UID 0, CW; Frequency: 835 MHz;Duty Cycle: 1:1
Medium: MSL_835_180831 Medium parameters used: f = 835 MHz; σ = 1.011 S/m; ξr = 56.243; ρ
= 1000 kg/m3
Ambient Temperature:23.5 ℃; Liquid Temperature:22.7 ℃
DASY5 Configuration:
- Probe: EX3DV4 - SN3958; ConvF(10.19, 10.19, 10.19); Calibrated: 2018.01.11;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1303; Calibrated: 2017.12.19
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331)
Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 4.02 W/kg
Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 57.36 V/m; Power Drift = 0.07 dB
Peak SAR (extrapolated) = 3.88 W/kg
SAR(1 g) = 2.37 W/kg; SAR(10 g) = 1.59 W/kg
Maximum value of SAR (measured) = 3.86 W/kg
0 dB = 3.86 W/kg
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2018.08.31
System Check_Body_1900MHz_180831
DUT: D1900V2-SN:5d182
Communication System: UID 0, CW; Frequency: 1900 MHz;Duty Cycle: 1:1
Medium: MSL_1900_180831 Medium parameters used: f = 1900 MHz; σ = 1.535 S/m; ξr = 54.579;
ρ = 1000 kg/m3
Ambient Temperature:23.4 ℃; Liquid Temperature:22.9 ℃
DASY5 Configuration:
- Probe: EX3DV4 - SN3958; ConvF(8.27, 8.27, 8.27); Calibrated: 2018.01.11;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1303; Calibrated: 2017.12.19
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331)
Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 13.3 W/kg
Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 81.47 V/m; Power Drift = 0.07 dB
Peak SAR (extrapolated) = 16.8 W/kg
SAR(1 g) = 9.89 W/kg; SAR(10 g) = 5.11 W/kg
Maximum value of SAR (measured) = 13.2 W/kg
0 dB = 13.2 W/kg
FCC SAR Test Report
Appendix B.
Report No. : FA871604
Plots of High SAR Measurement
The plots are shown as follows.
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page B1 of B1
Issued Date : Sep. 21, 2018
Form version. : 170125
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2018.08.31
01_GSM850_GSM Voice_Left Cheek_Ch128
Communication System: UID 0, Generic GSM (0); Frequency: 824.2 MHz;Duty Cycle: 1:8.3
Medium: HSL_835_180831 Medium parameters used: f = 824.2 MHz; σ = 0.895 S/m; ξr = 41.309;
ρ = 1000 kg/m3
Ambient Temperature:23.5 ℃; Liquid Temperature:22.6 ℃
DASY5 Configuration:
- Probe: EX3DV4 - SN3958; ConvF(10.31, 10.31, 10.31); Calibrated: 2018.01.11;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1303; Calibrated: 2017.12.19
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331)
Ch128/Area Scan (61x101x1): Interpolated grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.797 W/kg
Ch128/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 8.551 V/m; Power Drift = -0.02 dB
Peak SAR (extrapolated) = 0.846 W/kg
SAR(1 g) = 0.654 W/kg; SAR(10 g) = 0.467 W/kg
Maximum value of SAR (measured) = 0.763 W/kg
0 dB = 0.763 W/kg
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2018.08.30
02_GSM1900_GSM Voice_Right Cheek_Ch810
Communication System: UID 0, Generic GSM (0); Frequency: 1909.8 MHz;Duty Cycle: 1:8.3
Medium: HSL_1900_180830 Medium parameters used: f = 1909.8 MHz; σ = 1.45 S/m; ξr = 39.996;
ρ= 1000 kg/m3
Ambient Temperature:23.4 ℃; Liquid Temperature:22.7 ℃
DASY5 Configuration:
- Probe: EX3DV4 - SN3958; ConvF(8.43, 8.43, 8.43); Calibrated: 2018.01.11;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1303; Calibrated: 2017.12.19
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331)
Ch810/Area Scan (61x101x1): Interpolated grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.207 W/kg
Ch810/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 1.161 V/m; Power Drift = 0.07 dB
Peak SAR (extrapolated) = 0.279 W/kg
SAR(1 g) = 0.186 W/kg; SAR(10 g) = 0.113 W/kg
Maximum value of SAR (measured) = 0.235 W/kg
0 dB = 0.235 W/kg
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2018.08.31
03_WCDMA V_RMC 12.2K_Left Cheek_Ch4132
Communication System: UID 0, UMTS (0); Frequency: 826.4 MHz;Duty Cycle: 1:1
Medium: HSL_835_180831 Medium parameters used: f = 826.4 MHz; σ = 0.897 S/m; ξr = 41.291;
ρ = 1000 kg/m3
Ambient Temperature:23.5 ℃; Liquid Temperature:22.6 ℃
DASY5 Configuration:
- Probe: EX3DV4 - SN3958; ConvF(10.31, 10.31, 10.31); Calibrated: 2018.01.11;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1303; Calibrated: 2017.12.19
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331)
Ch4132/Area Scan (61x101x1): Interpolated grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.796 W/kg
Ch4132/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 7.764 V/m; Power Drift = -0.09 dB
Peak SAR (extrapolated) = 0.878 W/kg
SAR(1 g) = 0.671 W/kg; SAR(10 g) = 0.480 W/kg
Maximum value of SAR (measured) = 0.791 W/kg
0 dB = 0.796 W/kg
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2018.08.30
04_WCDMA II_RMC 12.2K_Right Cheek_Ch9262
Communication System: UID 0, UMTS (0); Frequency: 1852.4 MHz;Duty Cycle: 1:1
Medium: HSL_1900_180830 Medium parameters used: f = 1852.4 MHz; σ = 1.391 S/m; ξr =
40.251; ρ = 1000 kg/m3
Ambient Temperature:23.4 ℃; Liquid Temperature:22.7 ℃
DASY5 Configuration:
- Probe: EX3DV4 - SN3958; ConvF(8.43, 8.43, 8.43); Calibrated: 2018.01.11;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1303; Calibrated: 2017.12.19
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331)
Ch9262/Area Scan (61x101x1): Interpolated grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.565 W/kg
Ch9262/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 1.878 V/m; Power Drift = 0.08 dB
Peak SAR (extrapolated) = 0.658 W/kg
SAR(1 g) = 0.453 W/kg; SAR(10 g) = 0.281 W/kg
Maximum value of SAR (measured) = 0.558 W/kg
0 dB = 0.558 W/kg
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2018.08.31
05_GSM850_GSM Voice_Back_15mm_Ch251
Communication System: UID 0, Generic GSM (0); Frequency: 848.8 MHz;Duty Cycle: 1:8.3
Medium: MSL_835_180831 Medium parameters used: f = 848.8 MHz; σ = 1.026 S/m; ξr = 56.11; ρ
=1000 kg/m3
Ambient Temperature:23.5 ℃; Liquid Temperature:22.7 ℃
DASY5 Configuration:
- Probe: EX3DV4 - SN3958; ConvF(10.19, 10.19, 10.19); Calibrated: 2018.01.11;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1303; Calibrated: 2017.12.19
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331)
Ch251/Area Scan (61x101x1): Interpolated grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 1.04 W/kg
Ch251/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 3.735 V/m; Power Drift = 0.09 dB
Peak SAR (extrapolated) = 1.13 W/kg
SAR(1 g) = 0.853 W/kg; SAR(10 g) = 0.619 W/kg
Maximum value of SAR (measured) = 1.01 W/kg
0 dB = 1.01 W/kg
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2018.08.31
06_GSM1900_GSM Voice_Back_15mm_Ch810
Communication System: UID 0, Generic GSM (0); Frequency: 1909.8 MHz;Duty Cycle: 1:8.3
Medium: MSL_1900_180831 Medium parameters used: f = 1909.8 MHz; σ = 1.544 S/m; ξr =
54.559;ρ = 1000 kg/m3
Ambient Temperature:23.4 ℃; Liquid Temperature:22.9 ℃
DASY5 Configuration:
- Probe: EX3DV4 - SN3958; ConvF(8.27, 8.27, 8.27); Calibrated: 2018.01.11;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1303; Calibrated: 2017.12.19
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331)
Ch810/Area Scan (61x101x1): Interpolated grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.276 W/kg
Ch810/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 1.677 V/m; Power Drift = 0.07 dB
Peak SAR (extrapolated) = 0.303 W/kg
SAR(1 g) = 0.196 W/kg; SAR(10 g) = 0.118 W/kg
Maximum value of SAR (measured) = 0.252 W/kg
0 dB = 0.252 W/kg
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2018.08.31
07_WCDMA V_RMC 12.2K_Back_15mm_Ch4132
Communication System: UID 0, UMTS (0); Frequency: 826.4 MHz;Duty Cycle: 1:1
Medium: MSL_835_180831 Medium parameters used: f = 826.4 MHz; σ = 1.002 S/m; ξr = 56.337;
ρ = 1000 kg/m3
Ambient Temperature:23.5 ℃; Liquid Temperature:22.7 ℃
DASY5 Configuration:
- Probe: EX3DV4 - SN3958; ConvF(10.19, 10.19, 10.19); Calibrated: 2018.01.11;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1303; Calibrated: 2017.12.19
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331)
Ch4132/Area Scan (61x101x1): Interpolated grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.742 W/kg
Ch4132/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 3.260 V/m; Power Drift = 0.07 dB
Peak SAR (extrapolated) = 0.828 W/kg
SAR(1 g) = 0.635 W/kg; SAR(10 g) = 0.462 W/kg
Maximum value of SAR (measured) = 0.747 W/kg
0 dB = 0.747 W/kg
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2018.08.31
08_WCDMA II_RMC 12.2K_Back_15mm_Ch9262
Communication System: UID 0, UMTS (0); Frequency: 1852.4 MHz;Duty Cycle: 1:1
Medium: MSL_1900_180831 Medium parameters used: f = 1852.4 MHz; σ = 1.475 S/m; ξr =
54.674; ρ = 1000 kg/m3
Ambient Temperature:23.4 ℃; Liquid Temperature:22.9 ℃
DASY5 Configuration:
- Probe: EX3DV4 - SN3958; ConvF(8.27, 8.27, 8.27); Calibrated: 2018.01.11;
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1303; Calibrated: 2017.12.19
- Phantom: SAM (Front) with CRP v5.0; Type: QD000P40CD; Serial: TP:1795
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331)
Ch9262/Area Scan (61x101x1): Interpolated grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.461 W/kg
Ch9262/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 3.177 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 0.511 W/kg
SAR(1 g) = 0.330 W/kg; SAR(10 g) = 0.199 W/kg
Maximum value of SAR (measured) = 0.427 W/kg
0 dB = 0.427 W/kg
FCC SAR Test Report
Appendix C.
Report No. : FA871604
DASY Calibration Certificate
The DASY calibration certificates are shown as follows.
Sporton International (Shenzhen) Inc.
TEL : 86-755-8637-9589 / FAX : 86-755-8637-9595
FCC ID : 2ALTART301X
Page C1 of C1
Issued Date : Sep. 21, 2018
Form version. : 170125
逼
in Collabor
ation with
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-lo-62304633-2079
Fax:+86-lo-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Client
Sporton
Object
镊醉
Certificate No:
中国认可
国际互认
校准
CALIBRATION
CNAS L0570
Z17-97247
D835V2-SN:4d162
Galibration Procedure(s)
FF-Z11-003-01
Calibration Procedures for dipole validation kits
Calibration date
December 5, 2017
This calibration Certificate documents the traceability to national standards, which realize the physical units of
measurements(SI). The measurements and the uncertainties with confidence probability are given on the following
pages and are part ofthe certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature(22 3)c and
humidity<70%.
Calibration Equipment used (M&TE criticalfor calibration)
Primary Standards
Cal Date(Calibrated by, Cer
tificate No.)
DAE3
ID#
102196
100596
SN3617
SN536
Secondary Standards
ID#
Cal Date(Calibrated by, Certificate No.)
Power Meter NRVD
Power sensor NRV-Z5
Reference Probe EX3DV4
Mar-18
02-Mar-17 (CTTL, No.J17X01254)
Mar-18
23-Jan-17(SPEAG,No.EX3-3617_Jan17)
Jan-18
09-Oct-17(CTTL-SPEAG,No.Z17-97198)
Oct-18
Signal Generator E4438C
MY49071430
13-Jan-17 (CTTL, No.J 17X00286)
Network Analyzer E5071C MY46110673 13-Jan-17 (CTTL, No.J 17X00285)
Name
Calibrated by
Approved by
Function
Zhao Jing
SAR Test Engineer
Lin Hao
SAR Test Engineer
Qi Dianyuan
SAR Project Leader
Scheduled Calibration
Jan-18
Jan-18
Signature
"瓤地
翻"
一
Reviewed by
Scheduled Calibration
02-Mar-17 (CTTL, No.J17X01254)
Issued: December 9, 2017
This calibration certificate shall not be reproduced exceptin full without written approval ofthe laboratory.
Certificate No: Z17-97247
Page 1 of 8
逼 CAUBATIONe ATO"
En CoJSaboret
ion with
$ p e a
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-lo-62304633-2079
Fax: +86-lo-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Glossary:
TSL
ConvF
N/A
tissue simulating liquid
sensitivity in TSL / NORMx,y,z
not applicable or not measured
Calibration is Performed According to the Following Standards:
a) IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak
Spatial-Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless
Communications Devices: Measurement Techniques", June 2013
b) I EC 62209-1, "Measurement procedure for assessment of specific absorption rate of human
exposure to radio frequency fields from hand-held and body-mounted wireless
communication devices- Part 1: Device used nextto the ear(Frequency range of 300MHz to
6GHz)", July 2016
c) IEC 62209-2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless
communication devices used in close proximity to the human body (frequency range of
30MHz to 6GHz)", March 2010
d) KDB865664, SAR Measurement Requirements for 100 MHz to 6 GHz
Additional Documentation:
e) DASY4/5 System Handbook
Methods Applied and Interpretation of Parameters:
@ Measurement Conditions: Fur
ther details are available from the Validation Repor
t atthe end
ofthe cer
tificate. Allfigures stated in the cer
tificate are valid atthe frequency indicated.
@ Antenna Parameters with TSL: The dipole is mounted with the spacerto position its feed
point exactly below the center marking ofthe flat phantom section, with the arms oriented
parallelto the body axis.
@ Feed PointImpedance and Return Loss: These parameters are measured with the dipole
positioned underthe liquid filled phantom. The impedance stated is transformed from the
measurement atthe SMA connectorto the feed point. The Return Loss ensures low
reflected power. No uncer
tainty required.
@ Electrical Delay: One-way delay between the SMA connector and the antenna feed point.
No uncer
tainty required.
@ SAR measured: SAR measured atthe stated antenna input power.
@ SAR normalized: SAR as measured, normalized to an input power of1 W atthe antenna
connector.
@ SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the
nominal SAR result.
The reported uncertainty of measurement is stated as the standard uncertainty of
Measurement multiplied by the coverage factor k=2, which for a normal distribution
Corresponds to a coverage probability of approximately 95%.
Certificate No: Z17-97247
Page 2 of 8
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-lo-62304633-2079
Fax: +86-lo-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Measurement Conditions
DASY system configuration, as far as not given on page 1
DASY Version
DASY52
Extrapolation
Advanced Extrapolation
Phantom
Triple Flat Phantom 5.1C
Distance Dipole Center- TSL
52.lo.o.1446
15 mm
Zoom Scan Resolution
dx, dy, dz = 5 mm
Frequency
835 MHz 1 MHz
with Spacer
Head TSL parameters
The following parameters and calculations were applied
Temperature
Nominal Head TSL parameters
22.0 C
Measured Head TSL parameters
(22.0 0.2) C
Head TSL temperature change during test
<1.0 C
Permittivity
41.5
41.7 6%
ďź ďź ďź ďź 
Conductivity
0.90 mho/m
0.88 mho/m 6 %
ďź ďź ďź ďź 
SAR result with Head TSL
SAR averaged over1 cm3 (1 g) of Head TSL
SAR measured
Condition
250 mW input power
SAR for nominal Head TSL parameters
normalized to 1W
SAR averaged over10 cm3 (lo g) of Head TSL
SAR measured
2.34 mW/g
9.56 mW/g 18.8 %(k=2)
Condition
250 mW input power
SAR for nominal Head TSL parameters
normalized to 1W
1.54 mW/g
6.26 mW/g 18.7 %(k=2)
Body TSL parameters
The following parameters and calculations were applied
Temperature
Nominal Body TSL parameters
22.0 C
Measured Body TSL parameters
(22.0 0.2) C
Body TSL temperature change during test
<1.0 C
Permittivity
55.2
54.7 6 %
ďź ďź ďź ďź 
Conductivity
0.97 mho/m
0.96 mho/m 6 %
ďź ďź ďź ďź 
SAR result with Body TSL
SAR averaged over1 cm3 (1 g) of Body TSL
SAR measured
Condition
250 mW input power
SAR for nominal Body TSL parameters
normalized to 1W
SAR averaged over10 cm3 (lo g) of Body TSL
SAR measured
9.56 mW/g 18.8 %(k=2)
Condition
250 mW input power
SAR for nominal Body TSL parameters
Certificate No: Z17-97247
2.38 mW/g
Page 3 of 8
normalized to 1W
1.58 mW/g
6.34 mW/g 18.7 % (k=2)
月
枷皿
叶
In Collabor
ation with
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-lo-62304633-2079
Fax: +86-lo-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Appendix (Additional assessments outside the scope of CNAS L0570)
Antenna Parameters with Head TSL
Impedance, transformed to feed point
Return Loss
50.3Q- 2.96JQ
- 30.5dB
Antenna Parameters with Body TSL
Impedance,transformed to feed point
Return Loss
47.6Q- 3.92JQ
- 26.6dB
General Antenna Parameters and Design
Electrical Delay (one direction)
1.264 ns
Afterlong term use with 100W radiated power, only a sight warming ofthe dipole nearthe feedpoint can
be measured
The dipole is made of standard semirigid coaxia cable. The center conductor ofthe feeding ine is directly
connected to the second arm ofthe dipole. The antenna is therefore short-circuited for DC-signas. On some
ofthe dipoles, small end caps are added to the dipole arms in orderto improve matching when loaded
according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not
affected by this change. The overal dipoe ength is stil according to the Standard.
No excessive force must be applied to the dipole arms, because they might bend orthe soldered
connections nearthe feedpoint may be damaged
Additional EUT Data
Manufactured by
Certificate No: Zl7-97247
Page 4 of 8
SPEAG
^^@P^*^,^@
In Collaboration with
s p e a
^^^^~ ^ CAUBIWaiON
LAB<
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-lo-62304633-2079
Fax: +86-lo-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
DASY5 Validation Reportfor Head TSL
Test Laboratory: CTTL, Beijing, China
Date:
Date: 12.C
12¡04¡2017
DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 - SN: 4dl62
Communication System: UID 0, CW; Frequency: 835 MHz; Duty Cycle: 1:1
Medium parameters used: f^ 835 MHz; o = 0.876 S/m; er^ 41.67; p = 1000 kg/m3
Phantom section: Center Section
Measurement Standard: DASY5 (IEEE/IEC/ANSIC63.19-2007)
DASY5'Conf
igurat
ion:
Probe: EX3DV4 - SN3617; ConvF(9.73, 9.73, 9.73); Calibrated: 1/23/2017;
@ Sensor-Surface: 1.4mm (Mechanical Surface Detection)
@ Electronics: DAE3 Sn536; Calibrated: lo/9/2017
@ Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1161/1
@ Measurement SW: DASY52, Version 52.10 (0); SEMCAD X Version 14.6.10
(7417)
dy=5mm, dz=5mm
Reference Value = 58.70V/m; Power Drift = 0.00 dB
Peak SAR (extrapolated) = 3.53 W/kg
SAR(1 g) = 2.34 W/kg; SAR(lo g) = 1.54 W/kg
Maximum value of SAR (measured) = 3.13 W/kg
-2.08
-4.17
-6.25
-8.34
-10.^2
0 dB = 3.13 W/kg = 4.96 dBW/kg
Certificate No: Z17-97247
Page 5 of 8
皿
Dipole Calibration/Zoom Scan (7x7x7)(7x7x7)/Cube 0: Measurement grid: dx=5
^^^@@@^
^^^^ @
^n Collabor
ation with
s
甘 0 亩 且
'^^^^^^-y CALIBRATION
LAB<
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-lo-62304633-2079
Fax: +86-lo-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Impedance Measurement Plotfor Head TSL
土
千
日
/
塳
吨
9
;
l
·i
:
ďź 
i
·i @
口
旧
;
︒
¡
|
|
1
|@
; @ @
ďź 
@| @ 1| @ 1|
一: @@
一
11

| |i @|@
i@i
古
甲
1
|| @
¡
ďź 
厂
一
ďź 
厂
揍户

又
@1
l@
一
一

八
一
i
1j
11
|
|
ďź 
ďź 
-2.9630
ÂŁÂŹ
ÂĄÂŁ
1@
八
||
¡
?
¡¡
卜
|
50.328
@|
︒
一
¡
@T 835.00000 MHZ
ďź 
1
¡
|
-50·键
@茸睡 s且 smith (R+@x) scale l.OOOu [Fl ·Del]
¡
j
ďź 
ďź 
一
1@
@l
ll
l@
l1
@l
ďź 
一
l
ÂŁÂŹ
ÂĄÂŁ
@l
@@
1@
@@
| | |
一
1
i
ďź  ďź 
一
| |·
¡
ÂĄÂŁ
ÂŁÂŹ
ÂŁÂŹ ÂŁÂŹ
|: @
|
ďź 
|
-4o¡ 00
5
一30· 0o
口
;
七0¡ 00
ÂĄÂŁ
ďź 
一
1
0¡00o£
-To¡ 00
| || @ @
一
¡

一
Lo¡ O0
ÂŁÂŹ
¡
20ÂŁÂŹ0o
||
-
ÂĄÂŁ
ÂĄÂŁ
30¡ 00
5
|
爡
土
卜
5
0 0 0 0 d B [ ¥š
Trl S且 L
0d
50-0 o
ÂĄÂŁ
00 M
Hz @ 0 4
ÂĄÂŁ 40.00
l-
网
Certificate No: Zl7-97247
Page 6 of 8
一
理
In Collaborat
ion with
s p e a
CAUBRAT1ON LABORATOR^
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-lo-62304633-2079
Fax: +86-lo-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
DASY5 Validation Reportfor Body TSL
Date: 12¡05¡20l7
Test Laboratory: CTTL, Beijing, China
DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 @ SN: 4dl62
Hz; Duty Cycle: 1:1
Communication System: UID 0, CW; Frequency: 835 N
Medium parameters used: f = 835 MHz; a = 0.962 S/m; 8^ = 54.65; p = 1000 kg/m3
Phantom section: Left Section
Measurement Standard: DASY5 (IEEE/IEC/ANSIC63. 19-2007)
DASY5 Configuration:
@ Probe: EX3DV4 - SN3617; ConvF(9.64, 9.64, 9.64); Calibrated: 1/23/2017;
@ Sensor-Surface: 1.4mm (Mechanical Surface Detection)
@ Electronics: DAE3 Sn536; Calibrated: lo/9/2017
@ Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1161/1
@ Measurement SW: DASY52, Version 52.10 (0); SEMCAD X Version 14.6.10
(7417)
dy=5mm, dz=5mm
Reference Value = 55.91 V/m; Power Drif
t = -0.03 dB
Peak SAR (extrapolated) = 3.53 W/kg
SAR(1 g) = 2.38 W/kg; SAR(lo g) = 1.58 W/kg
Maximum value of SAR (measured) = 3.15 W/kg
dB 0
2¡02
@4,Q耳
-6.07
-8.09
-10.11
0 dB = 3.15 W/kg = 4.98 dBW/kg
Certificate No: Zl7-97247
Page 7 of 8
皿
Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5
In Collabor
at
ion with
s p e a
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-lo-62304633-2079
Fax: +86-lo-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Impedance Measurement Plotfor Body TSL
ďź 
! ; ! ! : :; ! ; ! : □ @
ďź 
ÂŁÂŹ
ÂĄÂŁ
ÂŁÂŹ
ďź 
^-p
Certificate No: Z17-97247
Page 8 of 8
一
哩
In Coilaboration with
仁冉廿nRN计斟械啊且灯斟锚
Add: No.51Xueyuan Road, Hadian District, Beijing, 100191, China
Tel:+86-lo-62304633-2079
Fax:+86-lo-62304633-2504
E-mail c田Qchina l.com
http://www.china l.cn
Client
Sporton ·
·,' · ·
Object
D1900V2-SN:5d182
Calibration Procedure(s)
FF-Z11-003-01
剿G
中国认可
国际互认
校准
CALIBRATION
CNAS L0570
-Certificate ,No: Z千了幸97250
Calibration Procedures for dipole validation kits
Calibration date:
December 6, 2017
This calibration Certificate documents the traceability to national standards, which realize the physical units of
measurements(SI). The measurements and the uncertainties with confidence probability are given on the following
pages and are part ofthe certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature(22 3)c and
humidity<70%.
Calibration Equipment used (M&TE criticalfor calibration)
Schedued Caibration
Ca Date(Ca ibrated by, Certificate No.)
Primary Standards
D#
Power Meter NRVD
102196
02-Mar-17(CTTL, NO.J17X01254)
Mar-18
Power sensor NRV-Z5
100596
02-Mar-17 (CTTL, NO.J17X01254)
Mar-18
Reference Probe EX3DV4
SN3617
23-Jan-17(SPEAG,No.EX3-3617_Jan17)
Jan-18
DAE3
SN 536
09-Oct-17(CTTL-SPEAG,No.Z17-97198)
Oct-18
Secondary Standards
ID #
Cal Date(Calibrated by, Certificate No.)
Signal Generator E4438C
MY49071430
13-Jan-17 (CTTL, No.J17X00286)
Jan-18
Network Analyzer E5071C MY46110673
13-Jan-17 (CTTL, NO.J17X00285)
Jan-18
Name
Function
Scheduled Calibration
Signature
Calibrated by:
Zhao Jjng
SAR Test Engineer
N^<\ ^
^^
Reviewed by:
Lin Hao
SAR Test Engineer
^\t
f-^^^ "^ C
Approved by:
Qi Dianyuan
SAR Project Leader
^^g^ ^1
Issued: December 10, 2017
This calibration certificate shall not be reproduced exceptin full without written approval ofthe laboratory.
Certificate No: Z17-97250
Page l of 8
一
一
机
In Goiaborat
ion with
一
s d e a
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-lo-62304633-2079
Fax: +86-lo-62304633-2504
E-mail: cttl@chinat
tl.com
http://www.chinat
tl.cn
lossary:
TSL
ConvF
N/A
tissue simulating liquid
sensitivity in TSL / NORMx,y,z
not applicable or not measured
Calibration is Performed According to the Following Standards:
a) IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak
Spatial-Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless
Communications Devices: Measurement Techniques", June 2013
b) IEC 62209-1, "Measurement procedure for assessment of specific absorption rate of human
exposure to radio frequency fields from hand-held and body-mounted wireless
communication devices- Part 1: Device used nextto the ear(Frequency range of 300MHz to
6GHz)", July 2016
c) IEC 62209-2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless
communication devices used in close proximity to the human body (frequency range of
30MHz to 6GHz)", March 2010
d) KDB865664, SAR Measurement Requirements for 100 MHz to 6 GHz
Additional Documentation:
e) DASY4/5 System Handbook
Methods Applied and Interpretation of Parameters:
@ Measurement Conditions: Further details are available from the Validation Report atthe end
ofthe certificate. Allfigures stated in the certificate are valid atthe frequency indicated.
@ Antenna Parameters with TSL: The dipole is mounted with the spacerto position its feed
point exactly below the center marking ofthe flat phantom section, with the arms oriented
parallelto the body axis.
@ Feed PointImpedance and Return Loss: These parameters are measured with the dipole
positioned underthe liquid filled phantom. The impedance stated is transformed from the
measurement atthe SMA connectorto the feed point. The Return Loss ensures low
reflected power. No uncertainty required.
@ Electrical Delay: One-way delay between the SMA connector and the antenna feed point.
No uncertainty required.
@ SAR measured: SAR measured atthe stated antenna input power.
@ SAR normalized: SAR as measured, normalized to an input power of1 W atthe antenna
connector.
@ SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the
nominal SAR result.
The reported uncertainty of measurement is stated as the standard uncertainty of
Measurement multiplied by the coverage factor k=2, which for a normal distribution
Corresponds to a coverage probability of approximately 95%.
Certificate No: Zl7-97250
Page 2 of 8
In Collabor
ation with
重工冗刀 s
TORY
CALIBRATION LABORAT^
?1, China
I, Haidian District,
Distriet, Beijing, 1001!
100191,
Add: No.51 Xueyuan Roadd.
Fax: +86-lo-62304633-2 504
Tel: +86-lo-62304633-207 9
http://www.chinattl.cn
E-mail: cttl@chinattl.com
Measurement Conditions
DASY system configuration, as far as not given on page 1
52.lo.o.1446
DASY52
DASY Version
Extrapolation
Advanced Extrapolation
Phantom
Triple Flat Phantom 5.1C
Distance Dipole Center- TSL
with Spacer
lo mm
Zoom Scan Resolution
dx, dy, dz = 5 mm
Frequency
1900 MHz 1 MHz
Head TSL parameters
The following parameters and calculations were applied
Temperature
22.0 C
Nominal Head TSL parameters
Measured Head TSL parameters
(22.0 0.2) C
<1.0 C
Head TSL temperature change during test
Permittivity
40.0
39.4 6 %
ďź ďź ďź ďź 
Conductivity
1.40 mho/m
1.41 mho/m 6 %
ďź ďź ďź ďź 
SAR result with Head TSL
SAR averaged over1 cm3 (1 g) of Head TSL
Condition
250 mW input power
SAR measured
normalized to 1W
SAR for nominal Head TSL parameters
SAR averaged over10 cm3 (lo g) of Head TSL
40.1 mW/g 18.8%(k=2)
Condition
250 mW input power
SAR measured
normalized to 1W
SAR for nominal Head TSL parameters
10.1 mW/g
5.27 mW / g
21.0 mW/g 18.7 % (k=2)
Body TSL parameters
The following parameters and calculations were applied
Temperature
22.0 C
Nominal Body TSL parameters
Measured Body TSL parameters
(22.0 0.2) C
Body TSL temperature change during test
<1.0 C
Permittivity
53.3
52.9 6 %
ďź ďź ďź ďź 
Conductivity
1.52 mho/m
1.54mho/m 6%
ďź ďź ďź ďź 
SAR result with Body TSL
SAR averaged over1 c^3 (1 g) of Body TSL
Condition
250 mW input power
SAR measured
normalized to 1W
SAR for nominal Body TSL parameters
SAR averaged over10 cm3 (lo g) of Body TSL
Condition
SAR for nominal Body TSL parameters
Certificate No: Zl7-97250
40.4 mW /g +18.8 % (k=2)
250 mW input power
SAR measured
10.2mW/g
Page 3 of 8
normalized to 1W
5.29 mW/g
21.0 mW/g 18.7 % (k=2)
扬
一
In Collaborat
ion with
且Z冗Z "
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-lo-62304633-2079
Fax: +86-lo-62304633-2504
E-mail: ct
tl@chinattl.com
http://www.chinat
tl.cn
Appendix (Additional assessments outside the scope of CNAS L0570)
Antenna Parameters with Head TSL
Impedance,transformed to feed point
52.2Q+ 5.30JQ
- 25.0dB
Return Loss
Antenna Parameters with Body TSL
Impedance,transformed to feed point
48.8Q+ 5.25JQ
- 25.3dB
Return Loss
General Antenna Parameters and Design
Electrical Delay (one direction)
1.066 ns
Afterlong term use with 100W radiated power, ony a slight warming ofthe dipole nearthe feedpoint can
be measured
The dipole is made of standard semirigid coaxial cable. The center conductor ofthe feeding line is directy
connected to the second arm ofthe dipole. The antenna is therefore short-circuited for DC-signals. On some
ofthe dipoes, small
II end caps are added to the dipoe arms in orderto improve matching when oaded
according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not
affected by this change. The overall dipoe ength is still
II according to the Standard.
No excessive force must be appied to the dipole arms, because they might bend orthe sodered
connections nearthe feedpoint may be damaged
Additional EUT Data
Manufactured by
Cer
tificate No: Zl7-97250
Page 4 of8
SPEAG
一
一
重工肚
s
蛙
技
CALIBRATIONLABORATOR^
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-lo-62304633-2079
Fax: +86-lo-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
ďź 
DASY5 Validation Reportfor Head TSL
Date: 12¡06¡20l7
Test Laboratory: CTTL, Beijing, China
DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 @ SN: 5dl82
Communication System: UID 0, CW; Frequency: 1900 MH2 ; Duty Cycle: 1:1
Medium parameters used:f= 1900 MHz; a = 1.409 S/m; sr: = 39.36; p= 1000 kg/m3
Z 本

Phantom section: Center Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2 307)
DASY5 Configuration:
@ Probe: EX3DV4 - SN3617; ConvF(8.26, 8.26, 8.26); Calibrated: 1/23/2017;
@ Sensor-Surface: 1.4mm (Mechanical Surface Detection)
@ Electronics: DAE3 Sn536; Calibrated: lo/9/2017
@ Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1161/1
Measurement SW: DASY52, Version 52.10 (0); SEMCAD X Version 14.6.10
(7417)
System Performance Check/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid
dx=5mm, dy=5mm, dz=5mm
Reference Value = 101.7 V/m; Power Drif
t = -0.01 dB
Peak SAR (extrapolated) = 19.3 W/kg
SAR(1 g) = 10.1 W/kg; SAR(lo g) = 5.27 W/kg
Maximum value of SAR (measured) = 15.9 W/kg
0 dB = 15.9 W/kg = 12.01 dBW/kg
Certificate No: Z17-97250
Page 5 of 8
一
叶
一
In Collaborat
ion with
s jj e a
|@
ďź 
ďź 
|| @@
ďź 
ďź 
ďź 
11
ďź 
ďź 
i@
ďź 
ďź 
ďź 
|@
ďź 
| ||| @
ďź´
1@
ďź 
@1@@|| @
ďź 
i@
|
|
塼
¡
¡

¡
一
一
一
-
-
一
三
三
一
一
¡
¡
一0
¡
一
¡
一
一
¡
¡
¡
甲 ·H l; 1 : lll
l
︐
; : ; ! :! 月 @ @ 曰| ·
ll·
︒
l@ ·
l一 工

一卜

-
-
一

70

一
相
ďźľ
ďźľ
¡
十
äťť
臣

¡
一
-


¡

上
¡
一
¡



¡

¡
一
-
o

¡

七
¡
-


¡


一
ďź 


¡

□
一
-
0 土
 
¡

巧 专
恰
幯
而
玉
ďź 
塼





z


2
5
上
时
·一
-


¡

2
m
口
ĺťż
百
色
五
上
一
-


¡

3
臼

¡

4
o
¡
-
-
¡
-
-
ďźł

¡
¡
一
一
¡
¡
-
-
o
¡
一
¡
寚
o
□ 1 目 ︒1 ;-
¡
︒
¡
︐@ T ! 十 l:︒叫·
︐
@; @·
¡
·-i@ ·
叫·
¡
l·
ďź 
¡
¡
¡
¡
1; @
o
-
-
¡
一
¡
一
一
一
+
9
-
¡
¡

· -
-
-
一
¡
︾
¡
一
¡
¡
a
亚


¡

4
¡
目
¡
一
叩
口


¡

5
塼
庄
百
一

嚲
Page 6 of 8
Certificate No: Z17-97250
RY
CAUBRAnOM
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-lo-62304633-2079
Fax: +86-lo-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Impedance Measurement Plotfor Head TSL
瑶:
亊
RATOR^
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel:+86-lo-62304633-2079
Fax:+86-lo-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
ďź 
DASY5 Validation Reportfor Body TSL
Date: l2¡06¡2017
Test Laboratory: CTTL, Beijing, China
DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 @ SN: 5dl82
Communication System: UID 0, CW; Frequency: 1900 MH2 ; Duty Cycle: 1:1
Medium parameters used: f = 1900 MHz; o = 1.542 S/m; 8r = = 52.89; p= 1000 kg/m3
 丝

Phantom section: Left Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2 307)
DASY5 Configuration:
@ Probe: EX3DV4 - SN3617; ConvF(7.95, 7.95, 7.95); Calibrated: 1/23/2017;
@ Sensor-Surface: 1.4mm (Mechanical Surface Detection)
@ Electronics: DAE3 Sn536; Calibrated: lo/9/2017
@ Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1161/1
@ Measurement SW: DASY52, Version 52.10 (0); SEMCAD X Version 14.6.10
(7417)
System Performance Check/Zoom Scan (7x7x7)(7x7x7)/Cube 0: Measurement grid
dx=5mm, dy=5mm, dz=5mm
Reference Value = 96.89 V/m; Power Drift = -0.02 dB
Peak SAR (extrapolated) = 18.6 W/kg
SAR(1 g) = 10.2 W/kg; SAR(lo g) = 5.29 W/kg
Maximum value of SAR (measured) = 15.7 W/kg
0 dB = 15.7 W/kg = 11.96 dBW/kg
Certificate No: Z17-97250
Page 7 of 8
^jgp^^t
oh^^
In e^abor
ation with
@/ // s
s 0
p e
^1^^^^
CALIBRAT^ON
CALIBRATION LABORATORY
LAB<
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-lo-62304633-2079
Fax:+86-lo-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Impedance Measurement Plotfor Body TSL
嚼
Certificate No: Z17-97250
Page 8 of 8
Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China
Tel: +86-lo-62304633-2218
Fax: +86-lo-62304633-2209
E-mail: cttl@chinattl.com
Http://www.chinattl.en
Client :
剿 mr CALIBRATION
Certificate No: Z17-97269
Sporton
圈熙豁翻一攒翻樵!蹄鳃弱翻翻圈翻翻搬战缴酗翻翻,幽嫩豁嫡甜蛾峪m@'@@狂魁脚揣'w'¡£'滞留肌俯刊廿""""@¡-"""'-
DAE4-SN: 1303
Object
Calibration Procedure(s)
FF-Z11-002-01
Calibration Procedure for the Data Acquisition Electronics
(DAEx)
December 19, 2017
Calibration date
This calibration Certificate documents the traceability to national standards, which realize the physical units of
measurements(SI). The measurements and the uncertainties with confidence probability are given on the following
pages and are part ofthe certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature(22 3)c and
humidity<70%.
Calibration Equipment used (M&TE criticalfor calibration)
Primary Standards
ID#
Cal Date(Calibrated by, Certificate No.)
Process Calibrator 753 | 1971018
Scheduled Calibration
27-Jun-17 (CTTL, No.J17X05859)
Name
June-18
Function
Calibrated by
Zhao Jing
SAR Test Engineer
Reviewed by
Ll怕·H·ao
$AR ^
^st Engi^eer
Approved by
Qi Dianyuan
SAR Project Leader
Issued: December 22, 2017
be reproduced exceptin full without written approval ofthe laboratory.
This calibration certificate shall not
Certificate No: Z17-97269
Page 1 of 3
色
In Collaborat
ion with
s ji ^e a
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China
Tel: +86-lo-62304633-2218
Fax: +86-lo-62304633-2209
E-mail: cttl@chinat
tl.com
Http://www.chinattl.cn
Glossary:
data acquisition electronics
Connector angle information used in DASY system to align probe sensor X
DAE
to the robot coordinate system.
Methods Applied and Interpretation of Parameters:
@ DC Voltage Measurement: Calibration Factor assessed for use in DASY
system by comparison with a calibrated instrumenttraceable to national
standards. The figure given corresponds to the full scale range ofthe
voltmeter in the respective range.
Connector angle: The angle ofthe connector is assessed measuring the
angle mechanically by a tool inserted. Uncertainty is notrequired.
The report provide only calibration results for DAE, it does not contain other
performance testresults.
Certificate No: Z17-97269
Page 2 of3
Add: No.51 Xueyuan Road, Haidian District, Beijing,100191, China
Tel: +86-lo-62304633-2218
Fax: +86-lo-62304633-2209
E-mail: cttl@chinattl.com
Http://www.chinattl.cn
DC Voltage Measurement
A/D - Converter Resolution nominal
High Range:
1LSB=
6.1nV,
fullrange =
-100...+300mV
Low Range:
1LSB=
61nV,
fullrange =
-1 +3mV
DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec
Calibration Factors
High Range
404.893 0.15% (k=2)
405.569 +0.15% (k=2) 403.452 0.15% (k=2)
Low Range
3.96471
4.01287 +0.7% (k=2)
0.7% (k=2) 3.99229 0.7% (k=2)
Connector Angle
Connector Angle to be used in DASY system
Certificate No: Z17-97269
Page 3 of3
36.5 o 土 @ o

Download: RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Mirror Download [FCC.gov]RT301X Mobile phone RF Exposure Info FCC TEST REPORT Planet Avvio
Document ID4015353
Application ID/Y8h45B1kChFJ4j+RgRWDA==
Document DescriptionSAR report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize350.46kB (4380782 bits)
Date Submitted2018-09-21 00:00:00
Date Available2018-09-23 00:00:00
Creation Date2018-09-21 11:43:59
Producing SoftwareMicrosoft® Word 2010
Document Lastmod2018-09-21 14:08:33
Document TitleFCC TEST REPORT
Document CreatorMicrosoft® Word 2010
Document Author: WBU Documentation Depr.

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : WBU Documentation Depr.
Create Date                     : 2018:09:21 11:43:59+08:00
Modify Date                     : 2018:09:21 14:08:33+08:00
Subject                         : FCC SAR Test Report
Has XFA                         : No
Language                        : zh-CN
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Microsoft® Word 2010
Title                           : FCC TEST REPORT
Creator                         : WBU Documentation Depr.
Description                     : FCC SAR Test Report
Creator Tool                    : Microsoft® Word 2010
Document ID                     : uuid:61D86985-8015-4D5E-8AF7-6329FE746F33
Instance ID                     : uuid:61D86985-8015-4D5E-8AF7-6329FE746F33
Part                            : 1
Conformance                     : A
Page Count                      : 81