FCC ID 2ALTTSY-T300RX

I3 SYNC TOUCH RX

by i3-Technologies N.V.

Grantee Code: 2ALTT   Product Code: SYT300RX
Latest application date: 2018-07-11

FCC ID Device Details

FCC ID2ALTTSY-T300RX
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ALTT
Product CodeSYT300RX
Applicant Businessi3-Technologies N.V. 🇧🇪
Related Domains i3-technologies.com
Equipment ClassI3 SYNC TOUCH RX
Test FirmDT&C; Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5220 MHzChange in identification of presently authorized equipment. Original FCC ID: BP9-AT-E1000P Grant Date: 04/09/20182018-07-11
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: BP9-AT-E1000P Grant Date: 04/09/20182018-07-11

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2019-01-07PDF 2.4 MB
external photosExternal Photos2019-01-07PDF 585.5 KB
labelID Label/Location Info2018-07-11PDF 231.8 KB
Authorization LetterCover Letter(s)2018-07-11PDF 59.3 KB
change in ID cover letterCover Letter(s)2018-07-11PDF 37.3 KB
confidentiality request letterCover Letter(s)2018-07-11PDF 39.9 KB

Application Information

Application IDcsVyXpClmtAKlpIlgPjcvA==
Final Action Date2018-07-11
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: BP9-AT-E1000P Grant Date: 04/09/2018
Applicant FRN0026436386
ModelSY-T300RX
Frequency Range5180-5220 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionI3 SYNC TOUCH RX
Responsible PartySteven Willems, Product Manager, steven.willems@i3-technologies.com , +3213355252
Test FirmLee Su-jeong, DT&C; Co., Ltd., gungmin0524@dtnc.net , 82-31-321-2664
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date01/07/2019
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. This device is restricted to indoor use only. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
csVyXpClmtAKlpIlgPjcvA==2018-07-11Change in identification of presently authorized equipment. Original FCC ID: BP9-AT-E1000P Grant Date: 04/09/2018
VZ90XwvkcaIcvWMAenmHIw==2018-07-11Change in identification of presently authorized equipment. Original FCC ID: BP9-AT-E1000P Grant Date: 04/09/2018

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.006000015CCC
5180-5220 MHz0.02315ECC
5745-5825 MHz0.02615ECC

Grants

TCB Grant - Application VZ90XwvkcaIcvWMAenmHIw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 07/11/2018

Application Dated: 07/11/2018
i3-Technologies N.V.
Nijverheidslaan 60
Deerlijk, 8540
Belgium
 
Attention: Steven Willems , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALTTSY-T300RX
Name of Grantee:  i3-Technologies N.V.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: I3 SYNC TOUCH RX
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.006  

Power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application VZ90XwvkcaIcvWMAenmHIw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

i3-Technologies N.V.
Nijverheidslaan 60
Deerlijk, 8540
Belgium
  Date of Grant: 07/11/2018

Application Dated: 07/11/2018
 
Attention: Steven Willems , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALTTSY-T300RX
Name of Grantee:  i3-Technologies N.V.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: I3 SYNC TOUCH RX
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.006  

Power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application csVyXpClmtAKlpIlgPjcvA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 07/11/2018

Application Dated: 07/11/2018
i3-Technologies N.V.
Nijverheidslaan 60
Deerlijk, 8540
Belgium
 
Attention: Steven Willems , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALTTSY-T300RX
Name of Grantee:  i3-Technologies N.V.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: I3 SYNC TOUCH RX
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5220.0 0.023  
CC 15E 5745.0  -  5825.0 0.026  

Power listed is conducted. This device is restricted to indoor use only. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application csVyXpClmtAKlpIlgPjcvA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

i3-Technologies N.V.
Nijverheidslaan 60
Deerlijk, 8540
Belgium
  Date of Grant: 07/11/2018

Application Dated: 07/11/2018
 
Attention: Steven Willems , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ALTTSY-T300RX
Name of Grantee:  i3-Technologies N.V.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: I3 SYNC TOUCH RX
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5220.0 0.023  
CC 15E 5745.0  -  5825.0 0.026  

Power listed is conducted. This device is restricted to indoor use only. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: