FCC ID 2ALZB-AG1103
IEEE 802.11 2X2 MU-MIMO ac/a/b/g/n Wireless LAN +Bluetooth NGFF Module
by SECO S.p.A.
Grantee Code: 2ALZB Product Code: AG1103
Latest application date: 2023-03-02
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-03-02 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2023-03-02 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2023-03-02 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-10-06 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-10-06 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-10-06 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CM276NF Grant Date: 07/30/2020 | 2021-05-30 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CM276NF Grant Date: 07/30/2020 | 2021-05-30 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CM276NF Grant Date: 07/30/2020 | 2021-05-30 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual_Rev0204 | Users Manual | 2023-06-11 | PDF 2.7 MB |
| User manual | Users Manual | 2022-04-04 | PDF 2.6 MB |
| Internal Photos_Rev0202 | Internal Photos | 2023-06-11 | PDF 978.9 KB |
| Internal Photos_Rev0817 | Internal Photos | 2022-04-04 | PDF 1 MB |
| External Photos_Rev0202 | External Photos | 2023-06-11 | PDF 421.9 KB |
| External photos | External Photos | 2022-04-04 | PDF 1.2 MB |
| External Photos | External Photos | 2021-05-30 | PDF 303.8 KB |
| Label and label location | ID Label/Location Info | 2023-03-02 | PDF 209.6 KB |
| Label and label location_Rev0909 | ID Label/Location Info | 2021-10-06 | PDF 209.6 KB |
| Label_Label Location | ID Label/Location Info | 2021-05-30 | PDF 39.6 KB |
| Test Setup Photos_Rev0131 | Test Setup Photos | 2023-06-11 | PDF 788.6 KB |
| Test setup photos | Test Setup Photos | 2022-04-04 | PDF 781.7 KB |
| Antenna SPEC_Rev0131 | Test Report | 2023-03-02 | PDF 697.5 KB |
| Test Report_BLE_Rev0202 | Test Report | 2023-03-02 | PDF 1.4 MB |
| Test Report_BT_Rev0202 | Test Report | 2023-03-02 | PDF 1.7 MB |
| Test Report_DTS_Rev0202 | Test Report | 2023-03-02 | PDF 2 MB |
| Test Report_MPE_Rev0131 | RF Exposure Info | 2023-03-02 | PDF 207.6 KB |
| Test Report_Transmit Simultaneously_Rev0131 | Test Report | 2023-03-02 | PDF 316 KB |
| Test Report_UNII_Rev0202-1 | Test Report | 2023-03-02 | PDF 3.3 MB |
| Test Report_BLE _Rev1006 | Test Report | 2021-10-06 | PDF 935.1 KB |
| Test Report_BT_Rev1004 | Test Report | 2021-10-06 | PDF 853.1 KB |
| Test Report_DTS_Rev1006 | Test Report | 2021-10-06 | PDF 1.2 MB |
| Test Report_MPE_Rev1006 | RF Exposure Info | 2021-10-06 | PDF 250.6 KB |
| Test Report_UNII_Rev1006 | Test Report | 2021-10-06 | PDF 2.2 MB |
| FCC 2.911[d][5] Attestation | Attestation Statements | 2023-03-02 | PDF 276.7 KB |
| FCC Agent for service Attestation from Applicant | Attestation Statements | 2023-03-02 | PDF 346.6 KB |
| SECO USA FCC Agent for service - Attestation from Agent | Attestation Statements | 2023-03-02 | PDF 34.5 KB |
| Class II permissive change format letter_Rev0204 | Cover Letter(s) | 2023-03-02 | PDF 145 KB |
| FCC Agent Auth Letter [UL Verification Services Inc]_signed | Cover Letter(s) | 2023-03-02 | PDF 802.2 KB |
| FCC Request for Confidentiality Letter [Long and Short Term]_Rev0204 | Cover Letter(s) | 2023-03-02 | PDF 103.3 KB |
| Class II permissive change format letter_Rev1004 | Cover Letter(s) | 2021-10-06 | PDF 109.7 KB |
| FCC Agent Auth Letter [UL Verification Services Inc]_L_S_P | Cover Letter(s) | 2021-10-06 | PDF 806.3 KB |
| FCC Agent Auth Letter _L_S_P | Cover Letter(s) | 2021-10-06 | PDF 806.3 KB |
| FCC Request for Confidentiality Letter_L_S_P | Cover Letter(s) | 2021-10-06 | PDF 401.3 KB |
| Agent Authorization Letter | Cover Letter(s) | 2021-05-30 | PDF 698.4 KB |
| Antenna Information | Cover Letter(s) | 2021-05-30 | PDF 163.4 KB |
| Change in ID Request Letter | Cover Letter(s) | 2021-05-30 | PDF 261.5 KB |
| Original Grantee Cover Letter | Cover Letter(s) | 2021-05-30 | PDF 741.2 KB |
| Antenna SPEC Metadata only | Operational Description | PDF 366.2 KB | |
| Operational description_Rev0204 Metadata only | Operational Description | PDF 625.3 KB | |
| Operational description_Rev1006 Metadata only | Operational Description | PDF 511.1 KB |
Application Information
| Application ID | w/yTlu2AL6Av8G9+7+XMyQ== |
|---|---|
| Final Action Date | 2023-03-02 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0026485466 |
| Model | AG1103 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | IEEE 802.11 2X2 MU-MIMO ac/a/b/g/n Wireless LAN +Bluetooth NGFF Module |
| Responsible Party | Alessandro Pali, alessandro.pali@seco.com  , +39 0575 26979 |
| Technical Contact | Grace Chen, BTL Inc., Grace.Chen@newbtl.com  , 886-2-2641-8198 |
| Test Firm | Wesley Chiu, BTL Inc., Andy.Chiu@newbtl.com , +886-2-2641-8198 |
| TCB Email | LST.FRE.CertNotice@ul.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 06/11/2023 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change to add SECO display units with dipole antennas as documented. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| w/yTlu2AL6Av8G9+7+XMyQ== | 2023-03-02 | Class II permissive change or modification of presently authorized equipment |
| Z5nM5QdKR8lH2ePtRWKF4g== | 2023-03-02 | Class II permissive change or modification of presently authorized equipment |
| Jed0ooq9itYOy5XWNl6udg== | 2023-03-02 | Class II permissive change or modification of presently authorized equipment |
| inRgrNgUCLIdKibzq+KpvA== | 2021-10-06 | Class II permissive change or modification of presently authorized equipment |
| iHfxI0885kv46NhYkmrZYA== | 2021-10-06 | Class II permissive change or modification of presently authorized equipment |
| 9sW5frarPijeiVOxh+mKGg== | 2021-10-06 | Class II permissive change or modification of presently authorized equipment |
| UL9A3iUppw3RF9HmtONSHQ== | 2021-05-30 | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CM276NF Grant Date: 07/30/2020 |
| Sya3LXaM7pRA7p0Wd2uWnA== | 2021-05-30 | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CM276NF Grant Date: 07/30/2020 |
| 038t/dj9IR690ecEceyx8Q== | 2021-05-30 | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CM276NF Grant Date: 07/30/2020 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0050000 | 15C | CC |
| 2402-2480 MHz | 0.003 | 15C | CC |
| 2412-2462 MHz | 0.932 | 15C | CC, MO |
| 5180-5240 MHz | 0.152 | 15E | CC, MO |
| 5180-5240 MHz | 0.152 | 15E | 38, CC, MO |
| 5260-5320 MHz | 0.148 | 15E | CC, MO |
| 5260-5320 MHz | 0.148 | 15E | 38, CC, MO, ND |
| 5500-5700 MHz | 0.137 | 15E | CC, MO |
| 5500-5700 MHz | 0.137 | 15E | 38, CC, MO, ND |
| 5745-5825 MHz | 0.194 | 15E | CC, MO |
| 5745-5825 MHz | 0.194 | 15E | 38, CC, MO |
Grants
TCB Grant - Application Z5nM5QdKR8lH2ePtRWKF4g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/02/2023 Application Dated: 03/02/2023 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AG1103 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IEEE 802.11 2X2 MU-MIMO ac/a/b/g/n Wireless LAN +Bluetooth NGFF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.194 |
| Class II permissive change to add SECO display units with dipole antennas and reduce output powers as documented. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Z5nM5QdKR8lH2ePtRWKF4g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 03/02/2023 Application Dated: 03/02/2023 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AG1103 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IEEE 802.11 2X2 MU-MIMO ac/a/b/g/n Wireless LAN +Bluetooth NGFF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.194 |
| Class II permissive change to add SECO display units with dipole antennas and reduce output powers as documented. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/02/2023 Application Dated: 03/02/2023 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AG1103 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IEEE 802.11 2X2 MU-MIMO ac/a/b/g/n Wireless LAN +Bluetooth NGFF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Class II permissive change to add SECO display units with dipole antennas as documented. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application w/yTlu2AL6Av8G9+7+XMyQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 03/02/2023 Application Dated: 03/02/2023 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AG1103 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IEEE 802.11 2X2 MU-MIMO ac/a/b/g/n Wireless LAN +Bluetooth NGFF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Class II permissive change to add SECO display units with dipole antennas as documented. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/30/2021 Application Dated: 05/04/2021 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AG1103 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | Technogym Live Display / Display Unity 22 / Display Unity 32 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.932 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application UL9A3iUppw3RF9HmtONSHQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 05/30/2021 Application Dated: 05/04/2021 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AG1103 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | Technogym Live Display / Display Unity 22 / Display Unity 32 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.932 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/30/2021 Application Dated: 05/04/2021 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AG1103 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Technogym Live Display / Display Unity 22 / Display Unity 32 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.194 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Sya3LXaM7pRA7p0Wd2uWnA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 05/30/2021 Application Dated: 05/04/2021 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AG1103 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Technogym Live Display / Display Unity 22 / Display Unity 32 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.194 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/02/2023 Application Dated: 03/02/2023 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AG1103 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11 2X2 MU-MIMO ac/a/b/g/n Wireless LAN +Bluetooth NGFF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.932 |
| Class II permissive change to add SECO display units with dipole antennas and reduce output powers as documented. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Jed0ooq9itYOy5XWNl6udg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 03/02/2023 Application Dated: 03/02/2023 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AG1103 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11 2X2 MU-MIMO ac/a/b/g/n Wireless LAN +Bluetooth NGFF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.932 |
| Class II permissive change to add SECO display units with dipole antennas and reduce output powers as documented. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/06/2021 Application Dated: 10/06/2021 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AG1103 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Technogym Live Display / Display Unity 22 / Display Unity 32 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Class II permissive change to add dipole antennas when installed in the SECO display unit described in this filing. The output power is reduced for 802.11a/g/b/n/ac and BLE modes when installed in this host. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application inRgrNgUCLIdKibzq+KpvA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 10/06/2021 Application Dated: 10/06/2021 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AG1103 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Technogym Live Display / Display Unity 22 / Display Unity 32 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Class II permissive change to add dipole antennas when installed in the SECO display unit described in this filing. The output power is reduced for 802.11a/g/b/n/ac and BLE modes when installed in this host. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/06/2021 Application Dated: 10/06/2021 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AG1103 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | Technogym Live Display / Display Unity 22 / Display Unity 32 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.932 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Class II permissive change to add dipole antennas when installed in the SECO display unit described in this filing. The output power is reduced for 802.11a/b/g/n/ac and BLE modes when installed in this host. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application iHfxI0885kv46NhYkmrZYA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 10/06/2021 Application Dated: 10/06/2021 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AG1103 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | Technogym Live Display / Display Unity 22 / Display Unity 32 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.932 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Class II permissive change to add dipole antennas when installed in the SECO display unit described in this filing. The output power is reduced for 802.11a/b/g/n/ac and BLE modes when installed in this host. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/06/2021 Application Dated: 10/06/2021 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AG1103 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Technogym Live Display / Display Unity 22 / Display Unity 32 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.194 |
| Class II permissive change to add dipole antennas when installed in the SECO display unit described in this filing. The output power is reduced for 802.11a/g/b/n/ac and BLE modes when installed in this host. Class II permissive change to add SECO display units with dipole antennas and reduce output powers as documented. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 9sW5frarPijeiVOxh+mKGg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 10/06/2021 Application Dated: 10/06/2021 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AG1103 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Technogym Live Display / Display Unity 22 / Display Unity 32 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.194 |
| Class II permissive change to add dipole antennas when installed in the SECO display unit described in this filing. The output power is reduced for 802.11a/g/b/n/ac and BLE modes when installed in this host. Class II permissive change to add SECO display units with dipole antennas and reduce output powers as documented. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/30/2021 Application Dated: 05/04/2021 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AG1103 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Technogym Live Display / Display Unity 22 / Display Unity 32 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 038t/dj9IR690ecEceyx8Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 05/30/2021 Application Dated: 05/04/2021 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AG1103 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Technogym Live Display / Display Unity 22 / Display Unity 32 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |