FCC ID 2ALZB-AW276
Wireless LAN + Bluetooth Module
by SECO S.p.A.
Grantee Code: 2ALZB Product Code: AW276
Latest application date: 2023-01-17
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-01-17 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2023-01-17 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-01-17 |
| 5745-5825 MHz | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CM276NF Grant Date: 07/30/2020 | 2022-07-06 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CM276NF Grant Date: 07/30/2020 | 2022-07-06 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CM276NF Grant Date: 07/30/2020 | 2022-07-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2023-01-17 | PDF 760.8 KB |
| External Photos | External Photos | 2023-01-17 | PDF 896.7 KB |
| External Photos | External Photos | 2022-07-06 | PDF 168 KB |
| Label detail and location | ID Label/Location Info | 2023-01-17 | PDF 304.5 KB |
| Label detail and location | ID Label/Location Info | 2022-07-06 | PDF 196.3 KB |
| Test Set Up Photos | Test Setup Photos | 2023-01-17 | PDF 1.8 MB |
| Test Setup Photos | Test Setup Photos | 2023-01-17 | PDF 1.8 MB |
| Antenna Datasheet | Test Report | 2023-01-17 | PDF 891.8 KB |
| Bluetooth Test Report | Test Report | 2023-01-17 | PDF 2 MB |
| DFS Test Report | Test Report | 2023-01-17 | PDF 2.2 MB |
| DFS Test Report - Antenna Gain Data | Test Report | 2023-01-17 | PDF 734.5 KB |
| DTS Test Report | Test Report | 2023-01-17 | PDF 2.4 MB |
| Intermod report 1 | Test Report | 2023-01-17 | PDF 763.3 KB |
| Intermod report 2 | Test Report | 2023-01-17 | PDF 586.6 KB |
| Intermod report 3 | Test Report | 2023-01-17 | PDF 823.7 KB |
| NII Test Report | Test Report | 2023-01-17 | PDF 1.7 MB |
| Attestation Letter | Attestation Statements | 2023-01-17 | PDF 377.8 KB |
| Authorization Letter | Cover Letter(s) | 2023-01-17 | PDF 288.3 KB |
| C2PC Request Letter | Cover Letter(s) | 2023-01-17 | PDF 675.4 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2023-01-17 | PDF 310.5 KB |
| Authorization Letter | Cover Letter(s) | 2022-07-06 | PDF 285.3 KB |
| Change in ID request | Cover Letter(s) | 2022-07-06 | PDF 339.4 KB |
| Change of ID Authorization letter OEM | Cover Letter(s) | 2022-07-06 | PDF 295.6 KB |
| MPE calculation | RF Exposure Info | 2023-01-17 | PDF 1.4 MB |
| Radio Mounting instructions Metadata only | Operational Description | PDF 675.1 KB |
Application Information
| Application ID | Up3Qvsogybxk+BBh2tlJhw== |
|---|---|
| Final Action Date | 2023-01-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0026485466 |
| Model | AW276 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Wireless LAN + Bluetooth Module |
| Responsible Party | Alessandro Pali, alessandro.pali@seco.com  , +39 0575 26979 |
| Technical Contact | Alessandro Pali, SECO S.p.A., certification@ul.com  , +39057526979 |
| Non-Technical Contact | Jacopo Erca, SECO S.p.A., Jacopo.Erca@seco.com , +39057526979 |
| Test Firm | Bernd Woerl, UL International Germany GmbH, bernd.woerl@ul.com , 4971149002031 |
| TCB Email | certification@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Permissive change to allow for use in a specific host product and use of a new antenna type with lower gain as defined in this filing. The module is for Grantee use only and is not intended for sale to third parties. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Up3Qvsogybxk+BBh2tlJhw== | 2023-01-17 | Class II permissive change or modification of presently authorized equipment |
| JBLETsVgklYrXgOaTIL0fg== | 2023-01-17 | Class II permissive change or modification of presently authorized equipment |
| BE7CYTSNgcpFb/ASOV8Zjg== | 2023-01-17 | Class II permissive change or modification of presently authorized equipment |
| m4IYDo4GaGSHGsxREgYx+g== | 2022-07-06 | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CM276NF Grant Date: 07/30/2020 |
| XmqrsZETMMamW/DfMVuM6A== | 2022-07-06 | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CM276NF Grant Date: 07/30/2020 |
| 3WK3zYjJhZOHhvaYjDpaUA== | 2022-07-06 | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CM276NF Grant Date: 07/30/2020 |
Equipment Authorization
Grants
TCB Grant - Application XmqrsZETMMamW/DfMVuM6A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1-3 Horizon Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 07/06/2022 Application Dated: 07/06/2022 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AW276 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.932 |
| C2PC to add 9 sets of dipole/PCB/PIFA antenna. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application XmqrsZETMMamW/DfMVuM6A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 07/06/2022 Application Dated: 07/06/2022 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AW276 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.932 |
| C2PC to add 9 sets of dipole/PCB/PIFA antenna. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1-3 Horizon Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 01/17/2023 Application Dated: 01/17/2023 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AW276 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless LAN + Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Permissive change to allow for use in a specific host product and use of a new antenna type with lower gain as defined in this filing. The module is for Grantee use only and is not intended for sale to third parties. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Up3Qvsogybxk+BBh2tlJhw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 01/17/2023 Application Dated: 01/17/2023 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AW276 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless LAN + Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Permissive change to allow for use in a specific host product and use of a new antenna type with lower gain as defined in this filing. The module is for Grantee use only and is not intended for sale to third parties. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1-3 Horizon Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 07/06/2022 Application Dated: 07/06/2022 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AW276 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.194 |
| C2PC to add 9 sets of dipole/PCB/PIFA antenna. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application m4IYDo4GaGSHGsxREgYx+g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 07/06/2022 Application Dated: 07/06/2022 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AW276 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.194 |
| C2PC to add 9 sets of dipole/PCB/PIFA antenna. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1-3 Horizon Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 01/17/2023 Application Dated: 01/17/2023 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AW276 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN + Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.194 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. Permissive change to allow for use in a specific host product and use of a new antenna type with lower gain as defined in this filing. The module is for Grantee use only and is not intended for sale to third parties. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application JBLETsVgklYrXgOaTIL0fg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 01/17/2023 Application Dated: 01/17/2023 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AW276 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN + Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.194 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. Permissive change to allow for use in a specific host product and use of a new antenna type with lower gain as defined in this filing. The module is for Grantee use only and is not intended for sale to third parties. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1-3 Horizon Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 01/17/2023 Application Dated: 01/17/2023 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AW276 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN + Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.932 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes. Permissive change to allow for use in a specific host product and use of a new antenna type with lower gain as defined in this filing. The module is for Grantee use only and is not intended for sale to third parties. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application BE7CYTSNgcpFb/ASOV8Zjg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 01/17/2023 Application Dated: 01/17/2023 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AW276 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN + Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.932 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes. Permissive change to allow for use in a specific host product and use of a new antenna type with lower gain as defined in this filing. The module is for Grantee use only and is not intended for sale to third parties. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1-3 Horizon Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 07/06/2022 Application Dated: 07/06/2022 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AW276 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless LAN + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| C2PC to add 9 sets of dipole/PCB/PIFA antenna. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 3WK3zYjJhZOHhvaYjDpaUA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 07/06/2022 Application Dated: 07/06/2022 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-AW276 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless LAN + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| C2PC to add 9 sets of dipole/PCB/PIFA antenna. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |