FCC ID 2ALZB-WL18LM2
IoT Gateway
by SECO S.p.A.
Grantee Code: 2ALZB Product Code: WL18LM2
Latest application date: 2021-08-23
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 | 2021-08-23 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 | 2021-08-23 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 | 2021-08-23 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2021-08-23 | PDF 124.1 KB |
| ID Label/Location Info | ID Label/Location Info | 2021-08-23 | PDF 100.1 KB |
| Change in ID Authorization | Cover Letter(s) | 2021-08-23 | PDF 203.2 KB |
| Declaration of authorization | Cover Letter(s) | 2021-08-23 | PDF 246.7 KB |
Application Information
| Application ID | sYJWbBxVw+XC9v3mMk4zgQ== |
|---|---|
| Final Action Date | 2021-08-23 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 |
| Applicant FRN | 0026485466 |
| Model | WL18LM2 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | IoT Gateway |
| Responsible Party | Alessandro Pali, alessandro.pali@seco.com  , +39 0575 26979 |
| Agent | Grace Grace Grace, BTL Inc., grace.chen@newbtl.com  , +886226418198 |
| Technical Contact | Scott Hsu, BTL Inc., Scott.Hsu@newbtl.com , +886226418198 |
| Non-Technical Contact | Grace Chen, BTL Inc., grace.chen@newbtl.com , +886226418198 |
| Test Firm | Andy Yeh, BTL Inc., andy.yeh@btl.com.tw  , +886-2-2641-8198 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| sYJWbBxVw+XC9v3mMk4zgQ== | 2021-08-23 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 |
| rJJOQ5L6k5QBamK4oUfGpg== | 2021-08-23 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 |
| 9H68Uj0QThY19tFExhPtkw== | 2021-08-23 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 |
Equipment Authorization
Grants
TCB Grant - Application sYJWbBxVw+XC9v3mMk4zgQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 08/23/2021 Application Dated: 08/02/2021 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-WL18LM2 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IoT Gateway |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0382 | ||
| 38 CC | 15E | 5190.0 - 5230.0 | 0.0499 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0244 | ||
| 38 CC ND | 15E | 5270.0 - 5310.0 | 0.0525 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application sYJWbBxVw+XC9v3mMk4zgQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 08/23/2021 Application Dated: 08/02/2021 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-WL18LM2 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IoT Gateway |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0382 | ||
| 38 CC | 15E | 5190.0 - 5230.0 | 0.0499 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0244 | ||
| 38 CC ND | 15E | 5270.0 - 5310.0 | 0.0525 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 08/23/2021 Application Dated: 08/02/2021 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-WL18LM2 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IoT Gateway |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application rJJOQ5L6k5QBamK4oUfGpg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 08/23/2021 Application Dated: 08/02/2021 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-WL18LM2 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IoT Gateway |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 08/23/2021 Application Dated: 08/02/2021 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-WL18LM2 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | IoT Gateway |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 9H68Uj0QThY19tFExhPtkw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 08/23/2021 Application Dated: 08/02/2021 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZB-WL18LM2 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | IoT Gateway |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |