FCC ID 2ALZBLBE616
Combo WiFi and Bluetooth radio module
by SECO S.p.A.
Grantee Code: 2ALZB Product Code: LBE616
Latest application date: 2023-01-04
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-01-04 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2023-01-04 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2023-01-04 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 05/24/2018 | 2021-07-06 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 05/24/2018 | 2021-07-06 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 05/24/2018 | 2021-07-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2023-01-04 | PDF 2.2 MB |
| User Manual | Users Manual | 2021-07-06 | PDF 299.5 KB |
| External Photos | External Photos | 2023-01-04 | PDF 1 MB |
| External photos | External Photos | 2021-07-06 | PDF 781.1 KB |
| Label Detail 1 | ID Label/Location Info | 2023-01-04 | PDF 203.7 KB |
| Label Detail 2 | ID Label/Location Info | 2023-01-04 | PDF 182.6 KB |
| Labelling Attestation Letter | ID Label/Location Info | 2021-07-06 | PDF 359.3 KB |
| Test Set Up | Test Setup Photos | 2023-01-04 | PDF 4.4 MB |
| Test Set Up | Test Setup Photos | 2023-01-04 | PDF 4.4 MB |
| Test Set Up 1 | Test Setup Photos | 2023-01-04 | PDF 1 MB |
| Test Set Up 2 | Test Setup Photos | 2023-01-04 | PDF 1.4 MB |
| Antenna Specification 1 | Test Report | 2023-01-04 | PDF 131.9 KB |
| Antenna Specification 2 | Test Report | 2023-01-04 | PDF 163.4 KB |
| DSS Test Report | Test Report | 2023-01-04 | PDF 1.2 MB |
| DTS Test Report 1 | Test Report | 2023-01-04 | PDF 1 MB |
| DTS Test Report 2 | Test Report | 2023-01-04 | PDF 1.4 MB |
| UNII Test Report | Test Report | 2023-01-04 | PDF 1.4 MB |
| Attestation Band 12 13 Restriction | Attestation Statements | 2023-01-04 | PDF 274.6 KB |
| Module use attestation | Attestation Statements | 2023-01-04 | PDF 382.4 KB |
| Authorisation Letter | Cover Letter(s) | 2023-01-04 | PDF 281.9 KB |
| Authorisation letter | Cover Letter(s) | 2023-01-04 | PDF 281.9 KB |
| Confidentiality Letter | Cover Letter(s) | 2023-01-04 | PDF 307.8 KB |
| Permissive Change Request | Cover Letter(s) | 2023-01-04 | PDF 390.6 KB |
| SAR Report Cover Letter | RF Exposure Info | 2023-01-04 | PDF 552.1 KB |
| Authorization Letter | Cover Letter(s) | 2021-07-06 | PDF 282.8 KB |
| New certification holder letter | Cover Letter(s) | 2021-07-06 | PDF 340.6 KB |
| Original certification holder letter | Cover Letter(s) | 2021-07-06 | PDF 26 KB |
| SAR Report | RF Exposure Info | 2023-01-04 | PDF 3.2 MB |
| Tune Up Info | Parts List/Tune Up Info | 2023-01-04 | PDF 555.2 KB |
| KDB Inquiry Metadata only | Operational Description | PDF 84.6 KB | |
| Operational Description Metadata only | Operational Description | PDF 785.8 KB |
Application Information
| Application ID | cZmVodVAyiOXyjFYGegIQQ== |
|---|---|
| Final Action Date | 2023-01-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0026485466 |
| Model | LBE616 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Combo WiFi and Bluetooth radio module |
| Responsible Party | Alessandro Pali, alessandro.pali@seco.com  , +39 0575 26979 |
| Technical Contact | Alessandro Pali, SECO S.p.A, alessandro.pali@seco.com , +39057526979 |
| Non-Technical Contact | Jacopo Erca, SECO S.p.A, Jacopo.erca@seco.com , +39057526979 |
| Test Firm | Bernd Woerl, UL International Germany GmbH, bernd.woerl@ul.com  , 4971149002031 |
| TCB Email | certification@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth Low Energy and WLAN 802.11a/b/g/n/ac transmitters. Permissive change to allow for use in a specific host product and use of a higher gain antenna as defined in this filing. The module is for Grantee use only and is not intended for sale to third parties |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| cZmVodVAyiOXyjFYGegIQQ== | 2023-01-04 | Class II permissive change or modification of presently authorized equipment |
| ZsFhfi9OXLRpgmDz0aHsNQ== | 2023-01-04 | Class II permissive change or modification of presently authorized equipment |
| H68sRlIlFRcb1jOM8zQGog== | 2023-01-04 | Class II permissive change or modification of presently authorized equipment |
| X3QKi64gm5TUqiALP6EXyg== | 2021-07-06 | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 05/24/2018 |
| L8DtzsnCMN/0vS432vWDtQ== | 2021-07-06 | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 05/24/2018 |
| Ix5RkhKX7ObdhTXbz+TTsQ== | 2021-07-06 | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 05/24/2018 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0070000 | 15C | CC |
| 2402-2480 MHz | 0.0032 | 15C | CC |
| 2412-2462 MHz | 0.2415 | 15C | CC |
| 5180-5240 MHz | 0.0303 | 15E | 38, CC |
| 5180-5240 MHz | 0.0303 | 15E | CC |
| 5260-5320 MHz | 0.0296 | 15E | 38, CC |
| 5260-5320 MHz | 0.0296 | 15E | CC |
| 5500-5720 MHz | 0.0278 | 15E | 38, CC |
| 5500-5720 MHz | 0.0278 | 15E | CC |
| 5745-5825 MHz | 0.0237 | 15E | 38, CC |
| 5745-5825 MHz | 0.0237 | 15E | CC |
Grants
TCB Grant - Application ZsFhfi9OXLRpgmDz0aHsNQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1-3 Horizon Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 01/04/2023 Application Dated: 01/04/2023 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZBLBE616 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Combo WiFi and Bluetooth radio module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0303 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0296 | ||
| CC | 15E | 5500.0 - 5720.0 | 0.0278 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0237 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth and WLAN 802.11b/g/n transmitters. This device has 20/40/80 MHz bandwidth modes. Permissive change to allow for use in a specific host product and use of a higher gain antenna as defined in this filing. The module is for Grantee use only and is not intended for sale to third parties. The highest reported SAR for the extremity (at 0mm) exposure condition is 0.37 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ZsFhfi9OXLRpgmDz0aHsNQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 01/04/2023 Application Dated: 01/04/2023 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZBLBE616 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Combo WiFi and Bluetooth radio module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0303 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0296 | ||
| CC | 15E | 5500.0 - 5720.0 | 0.0278 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0237 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth and WLAN 802.11b/g/n transmitters. This device has 20/40/80 MHz bandwidth modes. Permissive change to allow for use in a specific host product and use of a higher gain antenna as defined in this filing. The module is for Grantee use only and is not intended for sale to third parties. The highest reported SAR for the extremity (at 0mm) exposure condition is 0.37 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1-3 Horizon Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 07/06/2021 Application Dated: 07/06/2021 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZBLBE616 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Combo WiFi and Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth Low Energy and WLAN 802.11a/b/g/n/ac transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application X3QKi64gm5TUqiALP6EXyg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 07/06/2021 Application Dated: 07/06/2021 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZBLBE616 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Combo WiFi and Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth Low Energy and WLAN 802.11a/b/g/n/ac transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1-3 Horizon Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 07/06/2021 Application Dated: 07/06/2021 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZBLBE616 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Combo WiFi and Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0303 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.0296 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.0278 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0237 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth and WLAN 802.11b/g/n transmitters. This device has 20/40/80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application L8DtzsnCMN/0vS432vWDtQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 07/06/2021 Application Dated: 07/06/2021 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZBLBE616 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Combo WiFi and Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0303 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.0296 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.0278 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0237 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth and WLAN 802.11b/g/n transmitters. This device has 20/40/80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1-3 Horizon Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 07/06/2021 Application Dated: 07/06/2021 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZBLBE616 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | Combo WiFi and Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0032 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.2415 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and WLAN 802.11a/n/ac transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Ix5RkhKX7ObdhTXbz+TTsQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 07/06/2021 Application Dated: 07/06/2021 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZBLBE616 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | Combo WiFi and Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0032 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.2415 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and WLAN 802.11a/n/ac transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1-3 Horizon Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 01/04/2023 Application Dated: 01/04/2023 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZBLBE616 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | Combo WiFi and Bluetooth radio module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0032 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.2415 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and WLAN 802.11a/n/ac transmitters. Permissive change to allow for use in a specific host product and use of a higher gain antenna as defined in this filing. The module is for Grantee use only and is not intended for sale to third parties. The highest reported SAR for the extremity (at 0mm) exposure condition is 1.52 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application H68sRlIlFRcb1jOM8zQGog==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 01/04/2023 Application Dated: 01/04/2023 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZBLBE616 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | Combo WiFi and Bluetooth radio module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0032 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.2415 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and WLAN 802.11a/n/ac transmitters. Permissive change to allow for use in a specific host product and use of a higher gain antenna as defined in this filing. The module is for Grantee use only and is not intended for sale to third parties. The highest reported SAR for the extremity (at 0mm) exposure condition is 1.52 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1-3 Horizon Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 01/04/2023 Application Dated: 01/04/2023 |
| SECO S.p.A. |
| Via Achille Grandi 20 |
| AREZZO, 52100 Italy |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZBLBE616 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Combo WiFi and Bluetooth radio module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth Low Energy and WLAN 802.11a/b/g/n/ac transmitters. Permissive change to allow for use in a specific host product and use of a higher gain antenna as defined in this filing. The module is for Grantee use only and is not intended for sale to third parties |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application cZmVodVAyiOXyjFYGegIQQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SECO S.p.A. Via Achille Grandi 20 AREZZO, 52100 Italy |
Date of Grant: 01/04/2023 Application Dated: 01/04/2023 |
| Attention: Alessandro Pali |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ALZBLBE616 |
| Name of Grantee: | SECO S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Combo WiFi and Bluetooth radio module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth Low Energy and WLAN 802.11a/b/g/n/ac transmitters. Permissive change to allow for use in a specific host product and use of a higher gain antenna as defined in this filing. The module is for Grantee use only and is not intended for sale to third parties |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |