FCC ID 2AMG4-EINSTAR3
3D Scanner
by SHINING 3D Tech. Co., Ltd.
Grantee Code: 2AMG4 Product Code: EINSTAR3
Latest application date: 2024-11-13
FCC ID Device Details
| FCC ID | 2AMG4-EINSTAR3 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AMG4 |
| Product Code | EINSTAR3 |
| Applicant Business | SHINING 3D Tech. Co., Ltd. 🇨🇳 |
| Related Domains |  shining3d.com |
| Equipment Class | 3D Scanner |
| Test Firm | Shenzhen PSI Testing Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2024-11-13 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-11-13 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-08-23 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2024-08-23 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: XMR2024FCE863R Grant Date: 05/21/2024 | 2024-08-23 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-08-23 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: XMR2024FCE863R Grant Date: 05/21/2024 | 2024-08-23 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: XMR2024FCE863R Grant Date: 05/21/2024 | 2024-08-23 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual_Host | Users Manual | 2025-05-08 | PDF 4.9 MB |
| User Manual_Host | Users Manual | 2025-02-20 | PDF 2.2 MB |
| Internal Photos_Host | Internal Photos | 2025-05-08 | PDF 683.4 KB |
| Internal Photos_Host | Internal Photos | 2025-02-20 | PDF 841.2 KB |
| External Photos_Host | External Photos | 2025-05-08 | PDF 307.5 KB |
| External Photos | External Photos | 2025-02-20 | PDF 101.8 KB |
| External Photos_Host | External Photos | 2025-02-20 | PDF 933.4 KB |
| Product Label and Location_Host | ID Label/Location Info | 2024-11-13 | PDF 190.5 KB |
| Product Label and Location_Host | ID Label/Location Info | 2024-08-23 | PDF 1.3 MB |
| Produt Label and Location | ID Label/Location Info | 2024-08-23 | PDF 256.3 KB |
| SAR Test Setup Photos | Test Setup Photos | 2025-05-08 | PDF 5.6 MB |
| Test Setup Photos_2.4G WLAN | Test Setup Photos | 2025-05-08 | PDF 608.5 KB |
| Test Setup Photos_5G WLAN | Test Setup Photos | 2025-05-08 | PDF 608.5 KB |
| SAR Test Report Metadata only | Test Setup Photos | 2025-02-20 | PDF 3.8 MB |
| SAR Test Setup Photos | Test Setup Photos | 2025-02-20 | PDF 3.8 MB |
| Test Setup Photos_2.4G WLAN | Test Setup Photos | 2025-02-20 | PDF 913.4 KB |
| Test Setup Photos_5G WLAN | Test Setup Photos | 2025-02-20 | PDF 913.4 KB |
| Test Setup Photos_Bluetooth | Test Setup Photos | 2025-02-20 | PDF 913.4 KB |
| Antenna Gain Info | Test Report | 2024-11-13 | PDF 655.3 KB |
| SAR Test Report | RF Exposure Info | 2024-11-13 | PDF 1.5 MB |
| SAR Test Report_Appendix A System check | RF Exposure Info | 2024-11-13 | PDF 328.8 KB |
| SAR Test Report_Appendix A System check | RF Exposure Info | 2024-11-13 | PDF 324.9 KB |
| SAR Test Report_Appendix B SAR test data | RF Exposure Info | 2024-11-13 | PDF 324.9 KB |
| SAR Test Report_Appendix C Calibration certificates Part 1 of 2 | RF Exposure Info | 2024-11-13 | PDF 5.1 MB |
| SAR Test Report_Appendix C Calibration certificates Part 2 of 2 | RF Exposure Info | 2024-11-13 | PDF 4 MB |
| Test Report_2.4G WLAN | Test Report | 2024-11-13 | PDF 377.2 KB |
| Test Report_2.4G WLAN_Appendix_Part 1 of 3 | Test Report | 2024-11-13 | PDF 4.5 MB |
| Test Report_2.4G WLAN_Appendix_Part 2 of 3 | Test Report | 2024-11-13 | PDF 4.8 MB |
| Test Report_2.4G WLAN_Appendix_Part 3 of 3 | Test Report | 2024-11-13 | PDF 5.3 MB |
| Test Report_5G WLAN | Test Report | 2024-11-13 | PDF 397.6 KB |
| Test Report_5G WLAN_Appendix_Part 1 of 6 | Test Report | 2024-11-13 | PDF 3.9 MB |
| Test Report_5G WLAN_Appendix_Part 2 of 6 | Test Report | 2024-11-13 | PDF 4.3 MB |
| Test Report_5G WLAN_Appendix_Part 3 of 6 | Test Report | 2024-11-13 | PDF 4.3 MB |
| Test Report_5G WLAN_Appendix_Part 4 of 6 | Test Report | 2024-11-13 | PDF 4.4 MB |
| Test Report_5G WLAN_Appendix_Part 5 of 6 | Test Report | 2024-11-13 | PDF 4.2 MB |
| Test Report_5G WLAN_Appendix_Part 6 of 6 | Test Report | 2024-11-13 | PDF 5.1 MB |
| Antenna Gain Info_1 | Test Report | 2024-08-23 | PDF 769.6 KB |
| Antenna Gain Info_2 | Test Report | 2024-08-23 | PDF 835.4 KB |
| SAR Test Report | RF Exposure Info | 2024-08-23 | PDF 3.8 MB |
| SAR Test Report | RF Exposure Info | 2024-08-23 | PDF 1.1 MB |
| SAR Test Report_Appendix A system check | RF Exposure Info | 2024-08-23 | PDF 361.5 KB |
| SAR Test Report_Appendix B SAR test plots | RF Exposure Info | 2024-08-23 | PDF 481.2 KB |
| SAR Test Report_Appendix C 1 of 2 Calibration probe and Dipole | RF Exposure Info | 2024-08-23 | PDF 4 MB |
| SAR Test Report_Appendix C 2 of 2 Calibration probe and Dipole | RF Exposure Info | 2024-08-23 | PDF 5.1 MB |
| Test Report_2.4G WLAN | Test Report | 2024-08-23 | PDF 403.6 KB |
| Test Report_2.4G WLAN_Appendix_Part 1 of 2 | Test Report | 2024-08-23 | PDF 3.8 MB |
| Test Report_2.4G WLAN_Appendix_Part 2 of 2 | Test Report | 2024-08-23 | PDF 4 MB |
| Test Report_5G WLAN | Test Report | 2024-08-23 | PDF 413.7 KB |
| Test Report_5G WLAN_Appendix_Part 1 of 4 | Test Report | 2024-08-23 | PDF 4 MB |
| Test Report_5G WLAN_Appendix_Part 2 of 4 | Test Report | 2024-08-23 | PDF 4.3 MB |
| Test Report_5G WLAN_Appendix_Part 3 of 4 | Test Report | 2024-08-23 | PDF 4.5 MB |
| Test Report_5G WLAN_Appendix_Part 4 of 4 | Test Report | 2024-08-23 | PDF 4.8 MB |
| Test Report_Bluetooth | Test Report | 2024-08-23 | PDF 403.8 KB |
| Test Report_Bluetooth_Appendix_BLE | Test Report | 2024-08-23 | PDF 5 MB |
| Test Report_Bluetooth_Appendix_Classic BT_Part 1 of 2 | Test Report | 2024-08-23 | PDF 3.1 MB |
| Test Report_Bluetooth_Appendix_Classic BT_Part 2 of 2 | Test Report | 2024-08-23 | PDF 3.5 MB |
| Attestation of US Agent | Attestation Statements | 2024-11-13 | PDF 552.6 KB |
| Not Covered Entity Applicant Attestation | Attestation Statements | 2024-11-13 | PDF 55.3 KB |
| Not Covered Equipment Attestation | Attestation Statements | 2024-11-13 | PDF 57.8 KB |
| Not Covered Entity Applicant Attestation | Attestation Statements | 2024-08-23 | PDF 60.1 KB |
| Not Covered Entity Applicant Attestation | Attestation Statements | 2024-08-23 | PDF 56 KB |
| Not Covered Equipment Attestation | Attestation Statements | 2024-08-23 | PDF 416.7 KB |
| Not Covered Equipment Attestation | Attestation Statements | 2024-08-23 | PDF 57.7 KB |
| Agency Letter | Cover Letter(s) | 2024-11-13 | PDF 571.8 KB |
| C2PC Letter | Cover Letter(s) | 2024-11-13 | PDF 93.3 KB |
| Confidentiality Letter | Cover Letter(s) | 2024-11-13 | PDF 106.5 KB |
| Cover Letter_Module Approval Request Letter | Cover Letter(s) | 2024-11-13 | PDF 95.7 KB |
| C2PC Letter | Cover Letter(s) | 2024-08-23 | PDF 95.4 KB |
| Confidentiality Letter | Cover Letter(s) | 2024-08-23 | PDF 108.2 KB |
| Confidentiality Letter | Cover Letter(s) | 2024-08-23 | PDF 79.2 KB |
| FCC ID Change Authorization Letter | Cover Letter(s) | 2024-08-23 | PDF 85.1 KB |
| ID Change Request Letter | Cover Letter(s) | 2024-08-23 | PDF 16.5 KB |
| Module Approval Letter | Cover Letter(s) | 2024-08-23 | PDF 95.7 KB |
| Block Diagram_Host Metadata only | Block Diagram | PDF 47.2 KB | |
| Block Diagram_Host | Block Diagram | PDF 221 KB | |
| Schematics Metadata only | Schematics | PDF 1.5 MB | |
| Schematics_Host | Schematics | PDF 1.5 MB | |
| Schematics_Host Metadata only | Schematics | PDF 2.8 MB | |
| Operational Description Metadata only | Operational Description | PDF 95.4 KB | |
| Operational Description_Host Metadata only | Operational Description | PDF 62.3 KB | |
| Operational Description_Host | Operational Description | PDF 95.4 KB | |
| Operational Description_Software Security Info Metadata only | SDR Software/Security Info. | PDF 86.1 KB | |
| Operational Description_Software Security Info Metadata only | Operational Description | PDF 86.1 KB | |
| Operational Description_Software Security Info Metadata only | SDR Software/Security Info. | PDF 86.2 KB |
Application Information
| Application ID | Dz8hlXq+gygG0UiHnawang== |
|---|---|
| Final Action Date | 2024-11-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0033437625 |
| Model | EINSTAR3 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 3D Scanner |
| Responsible Party | Da Chen, chenda@shining3d.com , +86-18018371623 |
| Technical Contact | Da Chen, SHINING 3D Tech. Co., Ltd., Dachen@shining3d.com |
| Test Firm | Simple Guan, Shenzhen PSI Testing Co., Ltd., simple.guan@psi-lab.cn  , +86 0755-23019820 |
| TCB Email | tcb-hotline@tuv.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 05/08/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to request approval for adding specific portable configuration host (3D Scanner, Model: EinScan Libre) with alternative antennas configuration and also disabling the Bluetooth, U-NII-2A and U-NII-2C DFS Band through software as in the filling. The highest reported SAR for body-worn is 1.19 W/kg. Single Modular Approval. Output power is conducted. This device supports 20MHz and40MHz bandwidth mode. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Dz8hlXq+gygG0UiHnawang== | 2024-11-13 | Class II permissive change or modification of presently authorized equipment |
| +QxoFN+J9sX6hoejev4bAQ== | 2024-11-13 | Class II permissive change or modification of presently authorized equipment |
| r1sjEc9tgpE/n2mG+iwnrA== | 2024-08-23 | Class II permissive change or modification of presently authorized equipment |
| o7tWMpB+viVmGf48nCy02w== | 2024-08-23 | Class II permissive change or modification of presently authorized equipment |
| mPtsMrirN7vGI1ug7TX6IQ== | 2024-08-23 | Change in identification of presently authorized equipment. Original FCC ID: XMR2024FCE863R Grant Date: 05/21/2024 |
| l80SsZ24PyHv838goFxoUg== | 2024-08-23 | Class II permissive change or modification of presently authorized equipment |
| W785JbuZ5e6jnpGfjrf3eA== | 2024-08-23 | Change in identification of presently authorized equipment. Original FCC ID: XMR2024FCE863R Grant Date: 05/21/2024 |
| DvHSj8FKTz+KuKJEX+q4BA== | 2024-08-23 | Change in identification of presently authorized equipment. Original FCC ID: XMR2024FCE863R Grant Date: 05/21/2024 |
Equipment Authorization
Grants
TCB Grant - Application W785JbuZ5e6jnpGfjrf3eA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 08/23/2024 Application Dated: 08/23/2024 |
| SHINING 3D Tech. Co., Ltd. |
| No.1398 Xiangbin Rd., Wenyan St., |
| Xiaoshan District, |
| Hangzhou, 311258 China |
| Attention: Da Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMG4-EINSTAR3 |
| Name of Grantee: | SHINING 3D Tech. Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi & Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0076 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.8492 |
| Single Modular Approval. Output power is conducted. This device supports 20MHz and 40MHz bandwidth mode. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application W785JbuZ5e6jnpGfjrf3eA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHINING 3D Tech. Co., Ltd. No.1398 Xiangbin Rd., Wenyan St., Xiaoshan District, Hangzhou, 311258 China |
Date of Grant: 08/23/2024 Application Dated: 08/23/2024 |
| Attention: Da Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMG4-EINSTAR3 |
| Name of Grantee: | SHINING 3D Tech. Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi & Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0076 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.8492 |
| Single Modular Approval. Output power is conducted. This device supports 20MHz and 40MHz bandwidth mode. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 08/23/2024 Application Dated: 08/23/2024 |
| SHINING 3D Tech. Co., Ltd. |
| No.1398 Xiangbin Rd., Wenyan St., |
| Xiaoshan District, |
| Hangzhou, 311258 China |
| Attention: Da Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMG4-EINSTAR3 |
| Name of Grantee: | SHINING 3D Tech. Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi & Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.169 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.2104 |
| Class II Permissive Change to request approval for adding specific portable configuration host (3D Scanner, Model: Einstar Vega) with alternative antennas configuration and also disabling the U-NII-2A and U-NII-2C DFS Band through software as in the filling. The highest reported SAR for body-worn is 0.83 W/kg. Single Modular Approval. Output power is conducted. This device supports 20MHz, 40MHz and 80MHz bandwidth mode. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application r1sjEc9tgpE/n2mG+iwnrA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHINING 3D Tech. Co., Ltd. No.1398 Xiangbin Rd., Wenyan St., Xiaoshan District, Hangzhou, 311258 China |
Date of Grant: 08/23/2024 Application Dated: 08/23/2024 |
| Attention: Da Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMG4-EINSTAR3 |
| Name of Grantee: | SHINING 3D Tech. Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi & Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.169 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.2104 |
| Class II Permissive Change to request approval for adding specific portable configuration host (3D Scanner, Model: Einstar Vega) with alternative antennas configuration and also disabling the U-NII-2A and U-NII-2C DFS Band through software as in the filling. The highest reported SAR for body-worn is 0.83 W/kg. Single Modular Approval. Output power is conducted. This device supports 20MHz, 40MHz and 80MHz bandwidth mode. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 08/23/2024 Application Dated: 08/23/2024 |
| SHINING 3D Tech. Co., Ltd. |
| No.1398 Xiangbin Rd., Wenyan St., |
| Xiaoshan District, |
| Hangzhou, 311258 China |
| Attention: Da Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMG4-EINSTAR3 |
| Name of Grantee: | SHINING 3D Tech. Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi & Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0076 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.8492 |
| Class II Permissive Change to request approval for adding specific portable configuration host (3D Scanner, Model: Einstar Vega) with alternative antennas configuration and also disabling the U-NII-2A and U-NII-2C DFS Band through software as in the filling. The highest reported SAR for body-worn is 0.71 W/kg. Single Modular Approval. Output power is conducted. This device supports 20MHz and 40MHz bandwidth mode. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application o7tWMpB+viVmGf48nCy02w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHINING 3D Tech. Co., Ltd. No.1398 Xiangbin Rd., Wenyan St., Xiaoshan District, Hangzhou, 311258 China |
Date of Grant: 08/23/2024 Application Dated: 08/23/2024 |
| Attention: Da Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMG4-EINSTAR3 |
| Name of Grantee: | SHINING 3D Tech. Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi & Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0076 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.8492 |
| Class II Permissive Change to request approval for adding specific portable configuration host (3D Scanner, Model: Einstar Vega) with alternative antennas configuration and also disabling the U-NII-2A and U-NII-2C DFS Band through software as in the filling. The highest reported SAR for body-worn is 0.71 W/kg. Single Modular Approval. Output power is conducted. This device supports 20MHz and 40MHz bandwidth mode. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 08/23/2024 Application Dated: 08/23/2024 |
| SHINING 3D Tech. Co., Ltd. |
| No.1398 Xiangbin Rd., Wenyan St., |
| Xiaoshan District, |
| Hangzhou, 311258 China |
| Attention: Da Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMG4-EINSTAR3 |
| Name of Grantee: | SHINING 3D Tech. Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi & Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0144 |
| Single Modular Approval. Output power is conducted. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application mPtsMrirN7vGI1ug7TX6IQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHINING 3D Tech. Co., Ltd. No.1398 Xiangbin Rd., Wenyan St., Xiaoshan District, Hangzhou, 311258 China |
Date of Grant: 08/23/2024 Application Dated: 08/23/2024 |
| Attention: Da Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMG4-EINSTAR3 |
| Name of Grantee: | SHINING 3D Tech. Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi & Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0144 |
| Single Modular Approval. Output power is conducted. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 08/23/2024 Application Dated: 08/23/2024 |
| SHINING 3D Tech. Co., Ltd. |
| No.1398 Xiangbin Rd., Wenyan St., |
| Xiaoshan District, |
| Hangzhou, 311258 China |
| Attention: Da Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMG4-EINSTAR3 |
| Name of Grantee: | SHINING 3D Tech. Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi & Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0144 |
| Class II Permissive Change to request approval for adding specific portable configuration host (3D Scanner, Model: Einstar Vega) with alternative antennas configuration and also disabling the U-NII-2A and U-NII-2C DFS Band through software as in the filling. The highest reported SAR for body-worn is 0.07 W/kg. Single Modular Approval. Output power is conducted. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application l80SsZ24PyHv838goFxoUg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHINING 3D Tech. Co., Ltd. No.1398 Xiangbin Rd., Wenyan St., Xiaoshan District, Hangzhou, 311258 China |
Date of Grant: 08/23/2024 Application Dated: 08/23/2024 |
| Attention: Da Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMG4-EINSTAR3 |
| Name of Grantee: | SHINING 3D Tech. Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi & Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0144 |
| Class II Permissive Change to request approval for adding specific portable configuration host (3D Scanner, Model: Einstar Vega) with alternative antennas configuration and also disabling the U-NII-2A and U-NII-2C DFS Band through software as in the filling. The highest reported SAR for body-worn is 0.07 W/kg. Single Modular Approval. Output power is conducted. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 11/13/2024 Application Dated: 11/13/2024 |
| SHINING 3D Tech. Co., Ltd. |
| No.1398 Xiangbin Rd., Wenyan St., |
| Xiaoshan District, |
| Hangzhou, 311258 China |
| Attention: Da Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMG4-EINSTAR3 |
| Name of Grantee: | SHINING 3D Tech. Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | 3D Scanner |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.8492 |
| Class II Permissive Change to request approval for adding specific portable configuration host (3D Scanner, Model: EinScan Libre) with alternative antennas configuration and also disabling the Bluetooth, U-NII-2A and U-NII-2C DFS Band through software as in the filling. The highest reported SAR for body-worn is 1.19 W/kg. Single Modular Approval. Output power is conducted. This device supports 20MHz and40MHz bandwidth mode. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Dz8hlXq+gygG0UiHnawang==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHINING 3D Tech. Co., Ltd. No.1398 Xiangbin Rd., Wenyan St., Xiaoshan District, Hangzhou, 311258 China |
Date of Grant: 11/13/2024 Application Dated: 11/13/2024 |
| Attention: Da Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMG4-EINSTAR3 |
| Name of Grantee: | SHINING 3D Tech. Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | 3D Scanner |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.8492 |
| Class II Permissive Change to request approval for adding specific portable configuration host (3D Scanner, Model: EinScan Libre) with alternative antennas configuration and also disabling the Bluetooth, U-NII-2A and U-NII-2C DFS Band through software as in the filling. The highest reported SAR for body-worn is 1.19 W/kg. Single Modular Approval. Output power is conducted. This device supports 20MHz and40MHz bandwidth mode. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 08/23/2024 Application Dated: 08/23/2024 |
| SHINING 3D Tech. Co., Ltd. |
| No.1398 Xiangbin Rd., Wenyan St., |
| Xiaoshan District, |
| Hangzhou, 311258 China |
| Attention: Da Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMG4-EINSTAR3 |
| Name of Grantee: | SHINING 3D Tech. Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi & Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.169 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.177 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.2163 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.2104 |
| Single Modular Approval. Output power is conducted. This device supports 20MHz, 40MHz and 80MHz bandwidth mode. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application DvHSj8FKTz+KuKJEX+q4BA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHINING 3D Tech. Co., Ltd. No.1398 Xiangbin Rd., Wenyan St., Xiaoshan District, Hangzhou, 311258 China |
Date of Grant: 08/23/2024 Application Dated: 08/23/2024 |
| Attention: Da Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMG4-EINSTAR3 |
| Name of Grantee: | SHINING 3D Tech. Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi & Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.169 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.177 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.2163 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.2104 |
| Single Modular Approval. Output power is conducted. This device supports 20MHz, 40MHz and 80MHz bandwidth mode. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 11/13/2024 Application Dated: 11/13/2024 |
| SHINING 3D Tech. Co., Ltd. |
| No.1398 Xiangbin Rd., Wenyan St., |
| Xiaoshan District, |
| Hangzhou, 311258 China |
| Attention: Da Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMG4-EINSTAR3 |
| Name of Grantee: | SHINING 3D Tech. Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 3D Scanner |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.169 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.2104 |
| Class II Permissive Change to request approval for adding specific portable configuration host (3D Scanner, Model: EinScan Libre) with alternative antennas configuration and also disabling the Bluetooth, U-NII-2A and U-NII-2C DFS Band through software as in the filling. The highest reported SAR for body-worn is 0.42 W/kg. Single Modular Approval. Output power is conducted. This device supports 20MHz, 40MHzand 80MHz bandwidth mode. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application +QxoFN+J9sX6hoejev4bAQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHINING 3D Tech. Co., Ltd. No.1398 Xiangbin Rd., Wenyan St., Xiaoshan District, Hangzhou, 311258 China |
Date of Grant: 11/13/2024 Application Dated: 11/13/2024 |
| Attention: Da Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMG4-EINSTAR3 |
| Name of Grantee: | SHINING 3D Tech. Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 3D Scanner |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.169 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.2104 |
| Class II Permissive Change to request approval for adding specific portable configuration host (3D Scanner, Model: EinScan Libre) with alternative antennas configuration and also disabling the Bluetooth, U-NII-2A and U-NII-2C DFS Band through software as in the filling. The highest reported SAR for body-worn is 0.42 W/kg. Single Modular Approval. Output power is conducted. This device supports 20MHz, 40MHzand 80MHz bandwidth mode. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |