FCC ID 2AMNN-WU1-01
Wireless LAN Module
by Yokota Industrial Co., Ltd.
Grantee Code: 2AMNN Product Code: WU101
Latest application date: 2019-03-13
FCC ID Device Details
| FCC ID | 2AMNN-WU1-01 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AMNN |
| Product Code | WU101 |
| Applicant Business | Yokota Industrial Co., Ltd. 🇯🇵 |
| Related Domains |  yokota-kogyo.co.jp |
| Equipment Class | Wireless LAN Module |
| Test Firm | Intertek Japan K.K.(Matsuda laboratory) |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2019-03-13 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: ANSBP3591 Grant Date: 02/23/2012 | 2018-08-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2019-09-09 | PDF 1.9 MB |
| Internal Photos | Internal Photos | 2019-09-09 | PDF 973 KB |
| External Photos | External Photos | 2019-09-09 | PDF 309.2 KB |
| External Photos | External Photos | 2018-08-02 | PDF 135.3 KB |
| FCC ID Label and Location | ID Label/Location Info | 2018-08-02 | PDF 28.1 KB |
| Test Setup Photos | Test Setup Photos | 2019-09-09 | PDF 388.7 KB |
| Test Report | Test Report | 2019-03-13 | PDF 625.2 KB |
| Authorization Letter | Attestation Statements | 2019-03-13 | PDF 22.4 KB |
| Change in ID Authorization Letter | Attestation Statements | 2018-08-02 | PDF 200.5 KB |
| TCB Authorization Letter | Attestation Statements | 2018-08-02 | PDF 36.1 KB |
| Class II Cover Letter | Cover Letter(s) | 2019-03-13 | PDF 282.7 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2019-03-13 | PDF 36.3 KB |
| Cover Letter | Cover Letter(s) | 2018-08-02 | PDF 284.1 KB |
| MPE Report | RF Exposure Info | 2019-03-13 | PDF 92.3 KB |
| Block Diagrams Metadata only | Block Diagram | PDF 1.1 MB | |
| Schematics Metadata only | Schematics | PDF 3.3 MB | |
| Class II Change Description Metadata only | Operational Description | PDF 351.7 KB |
Application Information
| Application ID | IvFn3NmGt9ydMriNjuCoRA== |
|---|---|
| Final Action Date | 2019-03-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0026621607 |
| Model | WU1-01 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless LAN Module |
| Responsible Party | Shigetoshi Iwata, Advisor, shige-iwata@yokota-kogyo.co.jp , 81667881267 |
| Technical Contact | Randy Ortanez, PCTEST Engineering Laboratory, Inc., tcb@pctest.com  , 410-290-6652 |
| Test Firm | Tadashi Katsube, Intertek Japan K.K.(Matsuda laboratory), tadashi.katsube@intertek.com  , 81-465-89-2316 |
| TCB Email | tcb@pctest.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 09/09/2019 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change Output power listed is Conducted. C2PC to address integration of Yokota module BP3599, FCC ID 2AMNN-WU1-01, into host Yokota model WU-1. This device is approved for mobile applications and the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance. Only antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| IvFn3NmGt9ydMriNjuCoRA== | 2019-03-13 | Class II permissive change or modification of presently authorized equipment |
| 5OInGPPesEvrJaamPGx7rA== | 2018-08-02 | Change in identification of presently authorized equipment. Original FCC ID: ANSBP3591 Grant Date: 02/23/2012 |
Equipment Authorization
Grants
TCB Grant - Application IvFn3NmGt9ydMriNjuCoRA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PCTEST Engineering Laboratory, LLC 7185 Oakland Mills Road Columbia, MD 21046 |
Date of Grant: 03/13/2019 Application Dated: 03/13/2019 |
| Yokota Industrial Co., Ltd. |
| 5-55 Nishiiwata 3-chome |
| Higashiosaka, 578-0947 Japan |
| Attention: Shigetoshi Iwata , Advisor |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMNN-WU1-01 |
| Name of Grantee: | Yokota Industrial Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0524 | |||
| 15C | 2412.0 - 2462.0 | 0.1617 | |||
| 15C | 2412.0 - 2462.0 | 0.1306 |
| Class II Permissive Change Output power listed is Conducted. C2PC to address integration of Yokota module BP3599, FCC ID 2AMNN-WU1-01, into host Yokota model WU-1. This device is approved for mobile applications and the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance. Only antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application IvFn3NmGt9ydMriNjuCoRA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yokota Industrial Co., Ltd. 5-55 Nishiiwata 3-chome Higashiosaka, 578-0947 Japan |
Date of Grant: 03/13/2019 Application Dated: 03/13/2019 |
| Attention: Shigetoshi Iwata , Advisor |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMNN-WU1-01 |
| Name of Grantee: | Yokota Industrial Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0524 | |||
| 15C | 2412.0 - 2462.0 | 0.1617 | |||
| 15C | 2412.0 - 2462.0 | 0.1306 |
| Class II Permissive Change Output power listed is Conducted. C2PC to address integration of Yokota module BP3599, FCC ID 2AMNN-WU1-01, into host Yokota model WU-1. This device is approved for mobile applications and the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance. Only antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PCTEST Engineering Laboratory, LLC 7185 Oakland Mills Road Columbia, MD 21046 |
Date of Grant: 08/02/2018 Application Dated: 08/02/2018 |
| Yokota Industrial Co., Ltd. |
| 5-55 Nishiiwata 3-chome |
| Higashiosaka, 578-0947 Japan |
| Attention: Shigetoshi Iwata , Advisor |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMNN-WU1-01 |
| Name of Grantee: | Yokota Industrial Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0524 | |||
| 15C | 2412.0 - 2462.0 | 0.1671 | |||
| 15C | 2412.0 - 2462.0 | 0.1306 |
| Output power listed is Conducted. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrator are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Host systems must provide regulated supply voltages to the module. |
EAS Grant - Application 5OInGPPesEvrJaamPGx7rA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yokota Industrial Co., Ltd. 5-55 Nishiiwata 3-chome Higashiosaka, 578-0947 Japan |
Date of Grant: 08/02/2018 Application Dated: 08/02/2018 |
| Attention: Shigetoshi Iwata , Advisor |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMNN-WU1-01 |
| Name of Grantee: | Yokota Industrial Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0524 | |||
| 15C | 2412.0 - 2462.0 | 0.1671 | |||
| 15C | 2412.0 - 2462.0 | 0.1306 |
| Output power listed is Conducted. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrator are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Host systems must provide regulated supply voltages to the module. |
| Mail To: |