FCC ID 2AMX3BM64C1

Bluetooth module

by SUNITEC ELECTRONICS TECHNOLOGY LIMITED

Grantee Code: 2AMX3   Product Code: BM64C1
Latest application date: 2017-07-28

FCC ID Device Details

FCC ID2AMX3BM64C1
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AMX3
Product CodeBM64C1
Applicant BusinessSUNITEC ELECTRONICS TECHNOLOGY LIMITED 🇨🇳
Related Domains sunitec-cn.com
Equipment ClassBluetooth module
Test FirmGRG METROLOGY & TEST (SHENZHEN) CO., LTD.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2017-07-28
2402-2480 MHzOriginal Equipment2017-07-28

Exhibits

DocumentTypeAvailableFile
User manual part 1Users Manual2017-07-28PDF 5 MB
User manual part 2Users Manual2017-07-28PDF 2.4 MB
Internal photosInternal Photos2017-07-28PDF 188.5 KB
External photosExternal Photos2017-07-28PDF 188.6 KB
Label and label locationID Label/Location Info2017-07-28PDF 117.1 KB
Test setup photos dssTest Setup Photos2017-07-28PDF 464 KB
Test setup photos dtsTest Setup Photos2017-07-28PDF 464 KB
Test Report BT ClassicsTest Report2017-07-28PDF 3.7 MB
Test Report BT LETest Report2017-07-28PDF 2.6 MB
Confidentiality request letter(permanent)Cover Letter(s)2017-07-28PDF 23.9 KB
Modular approval requestCover Letter(s)2017-07-28PDF 65.4 KB
MPE reportRF Exposure Info2017-07-28PDF 227.5 KB
Block diagram Metadata onlyBlock DiagramPDF 198 KB
Schematic Metadata onlySchematicsPDF 475.9 KB
Operation description Metadata onlyOperational DescriptionPDF 177.3 KB

Application Information

Application IDhpoKksQvOOGyJJz3K6n1WQ==
Final Action Date2017-07-28
Application PurposeOriginal Equipment
Applicant FRN0026685073
ModelBM64C1
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionBluetooth module
Responsible Partyyuanshun Li, General manager, yuanshun@sunitec-cn.com , +86-755-2801-6180
Test FirmBun Hu, GRG METROLOGY & TEST (SHENZHEN) CO., LTD., hugb@grgtest.com , +86-755-2956 4585
TCB Emailtcb-essen@cetecom.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Single Modular Output power listed is maximum peak conducted as indicated in the filing. This module may only be installed by the OEM or an OEM integrator in the products as specified in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is approved for use in specific host products as detailed in this filing and must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located or operating in conjunction with any other antenna or transmitter except as detailed in this filing. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
hpoKksQvOOGyJJz3K6n1WQ==2017-07-28Original Equipment
2g00+O7aSHRHOnq19xBKhw==2017-07-28Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.036000015C
2402-2480 MHz0.042100015C

Grants

TCB Grant - Application hpoKksQvOOGyJJz3K6n1WQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM GmbH
Im Teelbruch 116
45219 Essen,
Germany
Date of Grant: 07/28/2017

Application Dated: 07/28/2017
SUNITEC ELECTRONICS TECHNOLOGY LIMITED
Building C No.725, WeiXiangTai Industrial Zone,
FuCheng Street, LongHua District
Shenzhen, Guangdong, 518100
China
 
Attention: yuanshun Li , General manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AMX3BM64C1
Name of Grantee:  SUNITEC ELECTRONICS TECHNOLOGY LIMITED
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0421  

Limited Single Modular

Output power listed is maximum peak conducted as indicated in the filing.

This module may only be installed by the OEM or an OEM integrator in the products as specified in this filing.

Compliance of this device in all final host configurations is the responsibility of the Grantee.

This device is approved for use in specific host products as detailed in this filing and must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located or operating in conjunction with any other antenna or transmitter except as detailed in this filing.

End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


EAS Grant - Application hpoKksQvOOGyJJz3K6n1WQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SUNITEC ELECTRONICS TECHNOLOGY LIMITED
Building C No.725, WeiXiangTai Industrial Zone, FuCheng Street, LongHua District
Shenzhen, Guangdong, 518100
China
  Date of Grant: 07/28/2017

Application Dated: 07/28/2017
 
Attention: yuanshun Li , General manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AMX3BM64C1
Name of Grantee:  SUNITEC ELECTRONICS TECHNOLOGY LIMITED
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0421  

Limited Single Modular

Output power listed is maximum peak conducted as indicated in the filing.

This module may only be installed by the OEM or an OEM integrator in the products as specified in this filing.

Compliance of this device in all final host configurations is the responsibility of the Grantee.

This device is approved for use in specific host products as detailed in this filing and must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located or operating in conjunction with any other antenna or transmitter except as detailed in this filing.

End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application 2g00+O7aSHRHOnq19xBKhw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM GmbH
Im Teelbruch 116
45219 Essen,
Germany
Date of Grant: 07/28/2017

Application Dated: 07/28/2017
SUNITEC ELECTRONICS TECHNOLOGY LIMITED
Building C No.725, WeiXiangTai Industrial Zone,
FuCheng Street, LongHua District
Shenzhen, Guangdong, 518100
China
 
Attention: yuanshun Li , General manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AMX3BM64C1
Name of Grantee:  SUNITEC ELECTRONICS TECHNOLOGY LIMITED
Equipment Class: Digital Transmission System
Notes: Bluetooth module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.036  

Limited Single Modular

Output power listed is maximum peak conducted as indicated in the filing.

This module may only be installed by the OEM or an OEM integrator in the products as specified in this filing.

Compliance of this device in all final host configurations is the responsibility of the Grantee.

This device is approved for use in specific host products as detailed in this filing and must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located or operating in conjunction with any other antenna or transmitter except as detailed in this filing.

End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


EAS Grant - Application 2g00+O7aSHRHOnq19xBKhw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SUNITEC ELECTRONICS TECHNOLOGY LIMITED
Building C No.725, WeiXiangTai Industrial Zone, FuCheng Street, LongHua District
Shenzhen, Guangdong, 518100
China
  Date of Grant: 07/28/2017

Application Dated: 07/28/2017
 
Attention: yuanshun Li , General manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AMX3BM64C1
Name of Grantee:  SUNITEC ELECTRONICS TECHNOLOGY LIMITED
Equipment Class: Digital Transmission System
Notes: Bluetooth module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.036  

Limited Single Modular

Output power listed is maximum peak conducted as indicated in the filing.

This module may only be installed by the OEM or an OEM integrator in the products as specified in this filing.

Compliance of this device in all final host configurations is the responsibility of the Grantee.

This device is approved for use in specific host products as detailed in this filing and must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located or operating in conjunction with any other antenna or transmitter except as detailed in this filing.

End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: