FCC ID 2AN3Q-EWE
EWD-evo Electronic Module
by Big Kaiser Precision Tooling Ltd
Grantee Code: 2AN3Q Product Code: EWE
Latest application date: 2019-02-15
FCC ID Device Details
| FCC ID | 2AN3Q-EWE |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AN3Q |
| Product Code | EWE |
| Applicant Business | Big Kaiser Precision Tooling Ltd 🇨🇭 |
| Related Domains |  ch.bigkaiser.com |
| Equipment Class | EWD-evo Electronic Module |
| Test Firm | 7layers GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-02-15 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-12-21 |
| 2402-2480 MHz | Original Equipment | 2018-03-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2019-02-15 | PDF 1.7 MB |
| Users Manual | Users Manual | 2018-03-22 | PDF 557.6 KB |
| Internal Photos | Internal Photos | 2019-02-15 | PDF 174.6 KB |
| Internal photo | Internal Photos | 2018-12-21 | PDF 174.6 KB |
| Internal Photos | Internal Photos | 2018-03-22 | PDF 166.3 KB |
| External Photos | External Photos | 2019-02-15 | PDF 58.9 KB |
| External photo | External Photos | 2018-12-21 | PDF 58.9 KB |
| External Photos | External Photos | 2018-03-22 | PDF 170.3 KB |
| ID Label/Location Info | ID Label/Location Info | 2019-02-15 | PDF 105.8 KB |
| ID Label/Location Info | ID Label/Location Info | 2018-03-22 | PDF 314.5 KB |
| EWE Module Specification | Operational Description | 2018-12-21 | PDF 1.7 MB |
| Operational Description | Operational Description | 2018-03-22 | PDF 1.6 MB |
| Test Setup Photos | Test Setup Photos | 2018-03-22 | PDF 577.3 KB |
| Test Report | Test Report | 2019-02-15 | PDF 892.1 KB |
| Test report | Test Report | 2018-12-21 | PDF 899.6 KB |
| Test Report | Test Report | 2018-03-22 | PDF 1 MB |
| Class II Permissive Change | Cover Letter(s) | 2019-02-15 | PDF 162 KB |
| Declaration of authorization | Cover Letter(s) | 2019-02-15 | PDF 427.9 KB |
| Declaration of authorization | Cover Letter(s) | 2018-12-21 | PDF 124 KB |
| FCC_C2PC_ApplicantLetter_re-assessment | Cover Letter(s) | 2018-12-21 | PDF 123 KB |
| Antenna SPEC | Cover Letter(s) | 2018-03-22 | PDF 240.1 KB |
| FCC Modular Approval Request | Cover Letter(s) | 2018-03-22 | PDF 270.7 KB |
| confidentiality | Cover Letter(s) | 2018-03-22 | PDF 124 KB |
| BOM | Parts List/Tune Up Info | 2018-03-22 | PDF 459.4 KB |
| Layout | Parts List/Tune Up Info | 2018-03-22 | PDF 3.6 MB |
| MPE Report | RF Exposure Info | 2018-03-22 | PDF 744.7 KB |
| Block Diagram Metadata only | Block Diagram | PDF 197.5 KB | |
| Schematics Metadata only | Schematics | PDF 528.1 KB |
Application Information
| Application ID | hJ66JE5oTfb98NJJrO1gsQ== |
|---|---|
| Final Action Date | 2019-02-15 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0026816116 |
| Model | EWE |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | EWD-evo Electronic Module |
| Responsible Party | Jose Fenollosa, Head of R&D; Electronics, jose.fenollosa@ch.bigkaiser.com , +41448179256 |
| Agent | Dirk Dirk Dirk, 7layers GmbH, dirk.bratsch@7layers.com  , 4902102749337 |
| Technical Contact | Jose Fenollosa, Big Kaiser Precision Tooling Ltd, jose.fenollosa@ch.bigkaiser.com , 41448179256 |
| Non-Technical Contact | Jose Fenollosa, Big Kaiser Precision Tooling Ltd, jose.fenollosa@ch.bigkaiser.com , 41448179256 |
| Test Firm | Bernhard Retka, 7layers GmbH, Bernhard.Retka@7layers.com , 0049 2102 749 452 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change : This change covers the use of the module in a new host (Precision Boring Tool EWE 100-203CKB7). Limited Modular Approval. Modular approval limited for host(s) BIG Kai-ser Products specified in this application. Power output listed is conducted. This LMA does not have RF shielding and is tested and approved as standalone configuration, additional evaluation may be required for any system integrating this radio module. Modular approval limited for host(s) specified in module specification doc. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of 0.43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| hJ66JE5oTfb98NJJrO1gsQ== | 2019-02-15 | Class II permissive change or modification of presently authorized equipment |
| GUgGT97Oeb1qkyY7c2gfIg== | 2018-12-21 | Class II permissive change or modification of presently authorized equipment |
| JehPhbSCARPlX9vrsFyS8g== | 2018-03-22 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0019000 | 15C |
Grants
TCB Grant - Application JehPhbSCARPlX9vrsFyS8g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/22/2018 Application Dated: 03/15/2018 |
| Big Kaiser Precision Tooling Ltd |
| Glattalstrasse 516 |
| P.O. Box 8153, |
| Ruemlang, 8153 Switzerland |
| Attention: Jose Fenollosa , Head of R&D Electronics |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AN3Q-EWE |
| Name of Grantee: | Big Kaiser Precision Tooling Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | EWD-evo Electronic Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0019 |
| Limited Modular Approval. Modular approval limited for host(s) BIG Kai-ser Products specified in this application. Power output listed is conducted. This LMA does not have RF shielding and is tested and approved as standalone configuration, additional evaluation may be required for any system integrating this radio module. Modular approval limited for host(s) specified in module specification doc. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application JehPhbSCARPlX9vrsFyS8g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Big Kaiser Precision Tooling Ltd Glattalstrasse 516 P.O. Box 8153, Ruemlang, 8153 Switzerland |
Date of Grant: 03/22/2018 Application Dated: 03/15/2018 |
| Attention: Jose Fenollosa , Head of R&D Electronics |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AN3Q-EWE |
| Name of Grantee: | Big Kaiser Precision Tooling Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | EWD-evo Electronic Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0019 |
| Limited Modular Approval. Modular approval limited for host(s) BIG Kai-ser Products specified in this application. Power output listed is conducted. This LMA does not have RF shielding and is tested and approved as standalone configuration, additional evaluation may be required for any system integrating this radio module. Modular approval limited for host(s) specified in module specification doc. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/15/2019 Application Dated: 01/30/2019 |
| Big Kaiser Precision Tooling Ltd |
| Glattalstrasse 516 |
| P.O. Box 8153, |
| Ruemlang, 8153 Switzerland |
| Attention: Jose Fenollosa , Head of R&D Electronics |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AN3Q-EWE |
| Name of Grantee: | Big Kaiser Precision Tooling Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | EWD-evo Electronic Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0019 |
| Class II Permissive Change : This change covers the use of the module in a new host (Precision Boring Tool EWE 100-203CKB7). Limited Modular Approval. Modular approval limited for host(s) BIG Kai-ser Products specified in this application. Power output listed is conducted. This LMA does not have RF shielding and is tested and approved as standalone configuration, additional evaluation may be required for any system integrating this radio module. Modular approval limited for host(s) specified in module specification doc. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of 0.43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application hJ66JE5oTfb98NJJrO1gsQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Big Kaiser Precision Tooling Ltd Glattalstrasse 516 P.O. Box 8153, Ruemlang, 8153 Switzerland |
Date of Grant: 02/15/2019 Application Dated: 01/30/2019 |
| Attention: Jose Fenollosa , Head of R&D Electronics |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AN3Q-EWE |
| Name of Grantee: | Big Kaiser Precision Tooling Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | EWD-evo Electronic Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0019 |
| Class II Permissive Change : This change covers the use of the module in a new host (Precision Boring Tool EWE 100-203CKB7). Limited Modular Approval. Modular approval limited for host(s) BIG Kai-ser Products specified in this application. Power output listed is conducted. This LMA does not have RF shielding and is tested and approved as standalone configuration, additional evaluation may be required for any system integrating this radio module. Modular approval limited for host(s) specified in module specification doc. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of 0.43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 12/21/2018 Application Dated: 12/20/2018 |
| Big Kaiser Precision Tooling Ltd |
| Glattalstrasse 516 |
| P.O. Box 8153, |
| Ruemlang, 8153 Switzerland |
| Attention: Jose Fenollosa , Head of R&D Electronics |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AN3Q-EWE |
| Name of Grantee: | Big Kaiser Precision Tooling Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Precision Boring Tool |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0019 |
| Class II Permissive Change : This change covers the use of the module in a new host (Precision Boring Tool “EWE 100-203CKB6”- (FCC ID: 2AN3Q-EWE)). Limited Modular Approval. Modular approval limited for host(s) BIG Kai-ser Products specified in this application. Power output listed is conducted. This LMA does not have RF shielding and is tested and approved as standalone configuration, additional evaluation may be required for any system integrating this radio module. Modular approval limited for host(s) specified in module specification doc. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application GUgGT97Oeb1qkyY7c2gfIg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Big Kaiser Precision Tooling Ltd Glattalstrasse 516 P.O. Box 8153, Ruemlang, 8153 Switzerland |
Date of Grant: 12/21/2018 Application Dated: 12/20/2018 |
| Attention: Jose Fenollosa , Head of R&D Electronics |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AN3Q-EWE |
| Name of Grantee: | Big Kaiser Precision Tooling Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Precision Boring Tool |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0019 |
| Class II Permissive Change : This change covers the use of the module in a new host (Precision Boring Tool “EWE 100-203CKB6”- (FCC ID: 2AN3Q-EWE)). Limited Modular Approval. Modular approval limited for host(s) BIG Kai-ser Products specified in this application. Power output listed is conducted. This LMA does not have RF shielding and is tested and approved as standalone configuration, additional evaluation may be required for any system integrating this radio module. Modular approval limited for host(s) specified in module specification doc. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |