FCC ID 2AN9S-ABX00042
Portenta H7
by Arduino S.r.l.
Grantee Code: 2AN9S Product Code: ABX00042
Latest application date: 2022-12-20
FCC ID Device Details
| FCC ID | 2AN9S-ABX00042 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AN9S |
| Product Code | ABX00042 |
| Applicant Business | Arduino S.r.l. 🇮🇹 |
| Related Domains |  arduino.cc |
| Equipment Class | Portenta H7 |
| Test Firm | Shenzhen Huatongwei International Inspection Co., |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2022-12-20 |
| 2402-2480 MHz | Original Equipment | 2022-12-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2022-12-20 | PDF 1.6 MB |
| Internal photos | Internal Photos | 2022-12-20 | PDF 78.4 KB |
| External Photos | External Photos | 2022-12-20 | PDF 414.3 KB |
| Label | ID Label/Location Info | 2022-12-20 | PDF 676.3 KB |
| Label location | ID Label/Location Info | 2022-12-20 | PDF 148 KB |
| Test setup | Test Setup Photos | 2022-12-20 | PDF 323.6 KB |
| Antenna specification | Test Report | 2022-12-20 | PDF 2.1 MB |
| Test Report BLE part 1 | Test Report | 2022-12-20 | PDF 1.5 MB |
| Test Report BLE part 2 | Test Report | 2022-12-20 | PDF 717.4 KB |
| Test report WiFi part 1 | Test Report | 2022-12-20 | PDF 2.6 MB |
| Test report WiFi part 2 | Test Report | 2022-12-20 | PDF 3 MB |
| Test report part 1 | Test Report | 2022-12-20 | PDF 1.4 MB |
| Test report part 2 | Test Report | 2022-12-20 | PDF 2.4 MB |
| Cover Letter | Cover Letter(s) | 2022-12-20 | PDF 140.4 KB |
| RF Exposure | RF Exposure Info | 2022-12-20 | PDF 74.5 KB |
| Block Diagram Metadata only | Block Diagram | PDF 105.6 KB | |
| Schematics Metadata only | Schematics | PDF 2.4 MB | |
| Operational Description Metadata only | Operational Description | PDF 402 KB |
Application Information
| Application ID | M580iWTXJZJJRffiPXlLDw== |
|---|---|
| Final Action Date | 2022-12-20 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0026964965 |
| Model | ABX00042 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Portenta H7 |
| Responsible Party | Dario Pennisi, HW Development Manager, d.pennisi@arduino.cc , +393356878904 |
| Test Firm | Tony Jiang, Shenzhen Huatongwei International Inspection Co.,, tony.jiang@szhtw.com.cn  , +86-755-26748078 |
| TCB Email | vina.kerai@nemko.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| M580iWTXJZJJRffiPXlLDw== | 2022-12-20 | Original Equipment |
| 2VyIc7Km7jYCf9svjL00ow== | 2022-12-20 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application M580iWTXJZJJRffiPXlLDw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 12/20/2022 Application Dated: 12/19/2022 |
| Arduino S.r.l. |
| Via Andrea Appiani, 25 |
| MONZA, 20900 Italy |
| Attention: Dario Pennisi , HW Development Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AN9S-ABX00042 |
| Name of Grantee: | Arduino S.r.l. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Portenta H7 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application M580iWTXJZJJRffiPXlLDw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Arduino S.r.l. Via Andrea Appiani, 25 MONZA, 20900 Italy |
Date of Grant: 12/20/2022 Application Dated: 12/19/2022 |
| Attention: Dario Pennisi , HW Development Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AN9S-ABX00042 |
| Name of Grantee: | Arduino S.r.l. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Portenta H7 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 12/20/2022 Application Dated: 12/19/2022 |
| Arduino S.r.l. |
| Via Andrea Appiani, 25 |
| MONZA, 20900 Italy |
| Attention: Dario Pennisi , HW Development Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AN9S-ABX00042 |
| Name of Grantee: | Arduino S.r.l. |
| Equipment Class: | Digital Transmission System |
| Notes: | Portenta H7 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0437 | |||
| 15C | 2402.0 - 2480.0 | 0.0038 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 2VyIc7Km7jYCf9svjL00ow==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Arduino S.r.l. Via Andrea Appiani, 25 MONZA, 20900 Italy |
Date of Grant: 12/20/2022 Application Dated: 12/19/2022 |
| Attention: Dario Pennisi , HW Development Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AN9S-ABX00042 |
| Name of Grantee: | Arduino S.r.l. |
| Equipment Class: | Digital Transmission System |
| Notes: | Portenta H7 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0437 | |||
| 15C | 2402.0 - 2480.0 | 0.0038 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |