FCC ID 2AN9S-ABX00046

Portenta H7 Lite Connected

by Arduino S.r.l.

Grantee Code: 2AN9S   Product Code: ABX00046
Latest application date: 2022-05-13

FCC ID Device Details

FCC ID2AN9S-ABX00046
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AN9S
Product CodeABX00046
Applicant BusinessArduino S.r.l. 🇮🇹
Related Domains arduino.cc
Equipment ClassPortenta H7 Lite Connected
Test FirmShenzhen Huatongwei International Inspection Co.,

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2022-05-13
2402-2480 MHzOriginal Equipment2022-05-13

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2022-05-13PDF 1.6 MB
Internal photosInternal Photos2022-05-13PDF 55.9 KB
External PhotosExternal Photos2022-05-13PDF 252.1 KB
LabelID Label/Location Info2022-05-13PDF 493.5 KB
Label locationID Label/Location Info2022-05-13PDF 193.1 KB
Test setupTest Setup Photos2022-05-13PDF 257.6 KB
Test report BLE part 1Test Report2022-05-13PDF 1.4 MB
Test report BLE part 2Test Report2022-05-13PDF 1.2 MB
Test report WiFi part 1Test Report2022-05-13PDF 2.2 MB
Test report WiFi part 2Test Report2022-05-13PDF 2.9 MB
Test report part 1Test Report2022-05-13PDF 1.3 MB
Test report part 2Test Report2022-05-13PDF 4.2 MB
Cover LetterCover Letter(s)2022-05-13PDF 157.1 KB
RF ExposureRF Exposure Info2022-05-13PDF 71 KB
Block Diagram Metadata onlyBlock DiagramPDF 149.6 KB
Schematics Metadata onlySchematicsPDF 271.7 KB
Operational Description Metadata onlyOperational DescriptionPDF 277.1 KB

Application Information

Application IDVFGkLAeyGUJ8sTQrT1TNvw==
Final Action Date2022-05-13
Application PurposeOriginal Equipment
Applicant FRN0026964965
ModelABX00046
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionPortenta H7 Lite Connected
Responsible PartySara Therner, Trademark & Licensing Manager, certifications@arduino.cc , +390113157477
Test FirmJason Liu, Shenzhen Huatongwei International Inspection Co.,, quality@szhtw.com.cn , +86-755-26748078
TCB Emailvina.kerai@nemko.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
VFGkLAeyGUJ8sTQrT1TNvw==2022-05-13Original Equipment
/oaDPyfBgbu9vqxZdQ0d7w==2022-05-13Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.000800015C
2402-2480 MHz0.003215C
2412-2462 MHz0.03315C

Grants

TCB Grant - Application VFGkLAeyGUJ8sTQrT1TNvw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 05/13/2022

Application Dated: 05/13/2022
Arduino S.r.l.
Via Andrea Appiani, 25
MONZA, 20900
Italy
 
Attention: Sara Therner , Trademark & Licensing Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AN9S-ABX00046
Name of Grantee:  Arduino S.r.l.
Equipment Class: Digital Transmission System
Notes: Portenta H7 Lite Connected
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.033  
15C 2402.0  -  2480.0 0.0032  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application VFGkLAeyGUJ8sTQrT1TNvw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Arduino S.r.l.
Via Andrea Appiani, 25
MONZA, 20900
Italy
  Date of Grant: 05/13/2022

Application Dated: 05/13/2022
 
Attention: Sara Therner , Trademark & Licensing Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AN9S-ABX00046
Name of Grantee:  Arduino S.r.l.
Equipment Class: Digital Transmission System
Notes: Portenta H7 Lite Connected
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.033  
15C 2402.0  -  2480.0 0.0032  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application /oaDPyfBgbu9vqxZdQ0d7w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 05/13/2022

Application Dated: 05/13/2022
Arduino S.r.l.
Via Andrea Appiani, 25
MONZA, 20900
Italy
 
Attention: Sara Therner , Trademark & Licensing Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AN9S-ABX00046
Name of Grantee:  Arduino S.r.l.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Portenta H7 Lite Connected
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0008  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application /oaDPyfBgbu9vqxZdQ0d7w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Arduino S.r.l.
Via Andrea Appiani, 25
MONZA, 20900
Italy
  Date of Grant: 05/13/2022

Application Dated: 05/13/2022
 
Attention: Sara Therner , Trademark & Licensing Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AN9S-ABX00046
Name of Grantee:  Arduino S.r.l.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Portenta H7 Lite Connected
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0008  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: