72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .

CJ Global . Wireless Charger

Page 1 of 72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .
Page 2 of 72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .
Page 3 of 72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .
Page 4 of 72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .
Page 5 of 72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .
Page 6 of 72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .
Page 7 of 72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .
Page 8 of 72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .
Page 9 of 72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .
Page 10 of 72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .
Page 11 of 72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .
Page 12 of 72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .
Page 13 of 72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .
Page 14 of 72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .
Page 15 of 72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .
Page 16 of 72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .
Page 17 of 72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .
Page 18 of 72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .

TEST REPORT
Reference No. ....................
: WTS18S08120829-1W
FCC ID ................................
: 2AND8-72XXC
Applicant ............................
: CJ Global Inc.
Address ..............................
: 20-21 Wagaraw Road Bldg 30 Fair Lawn, New Jersey 07410, United States
Manufacturer ....................
: CJ Global Inc.
Address ..............................
: 20-21 Wagaraw Road Bldg 30 Fair Lawn, New Jersey 07410, United States
Product...............................
: Wireless Charger
Model(s) .............................
: 72887-DR
Standards...........................
Date of Receipt sample ....
: 2018-08-10
Date of Test .......................
: 2018-08-11 to 2018-08-21
Date of Issue ......................
: 2018-09-13
Test Result .........................
: Pass
FCC CFR47 Part 15.207: 2018
FCC CFR47 Part 15.209: 2018
Remarks:
The results shown in this test report refer only to the sample(s) tested, this test report cannot be
reproduced, except in full, without prior written permission of the company. The report would be invalid
without specific stamp of test institute and the signatures of compiler and approver.
Prepared By:
Waltek Services (Shenzhen) Co., Ltd.
Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen,
Guangdong, China
Test Site/Test Location:
Waltek Services (Shenzhen) Co., Ltd.
Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen,
Guangdong, China
Tel :+86-755-83551033
Fax:+86-755-83552400
Compiled by:
Approved by:
Robin Zhou / Project Engineer
Philo Zhong / Manager
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Page 1 of 18
Reference No.: WTS18S08120829-1W
Page 2 of 18
Laboratories Introduction
Waltek Services (Shenzhen) Co., Ltd is a professional third-party testing and certification
laboratory with multi-year product testing and certification experience, established strictly in accordance
with ISO/IEC 17025 requirements, and accredited by ILAC (International Laboratory Accreditation
Cooperation) member. A2LA (American Association for Laboratory Accreditation) of USA, Meanwhile,
Waltek has got recognition as registration and accreditation laboratory from EMSD (Electrical and
Mechanical Services Department), and American Energy star, FCC(The Federal Communications
Commission), CEC(California energy efficiency), IC(Industry Canada). It’s the strategic partner and data
recognition laboratory of international authoritative organizations, such as Intertek(ETL-SEMKO), TÜV
Rheinland, TÜV SÜD, etc.
Waltek Services (Shenzhen) Co., Ltd is one of the largest and the most comprehensive third party
testing laboratory in China. Our test capability covered four large fields: safety test. Electro Magnetic
Compatibility (EMC), and energy performance, wireless radio. As a professional, comprehensive, justice
international test organization, we still keep the scientific and rigorous work attitude to help each client
satisfy the international standards and assist their product enter into globe market smoothly.
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S08120829-1W
Page 3 of 18
1.1 Test Facility
Waltek Services (Shenzhen) Co., Ltd.
A. Accreditations for Conformity Assessment (International)
Country/Region
Accreditation Body
Scope
USA
FCC ID \ DOC \ VOC
Canada
IC ID \ VOC
Japan
MIC-T \ MIC-R
A2LA
Europe
EMCD \ RED
(Certificate No.: 4243.01)
Taiwan
NCC
Hong Kong
OFCA
Australia
RCM
India
WPC
Thailand
NTC
International Services
Singapore
IDA
Note:
1. FCC Designation No.: CN1201. Test Firm Registration No.: 523476.
2. IC Canada Registration No.: 7760A
B. TCBs and Notify Bodies Recognized Testing Laboratory.
Recognized Testing Laboratory of …
TUV Rheinland
Intertek
TUV SUD
SGS
Phoenix Testlab GmbH
Element Materials Technology Warwick Ltd
Timco Engineering, Inc.
Eurofins Product Service GmbH
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Notify body number
Optional.
0700
0891
1177
0681
Note
Reference No.: WTS18S08120829-1W
Page 4 of 18
Contents
Page
COVER PAGE ............................................................................................................................................ 1
LABORATORIES INTRODUCTION ............................................................................................................ 2
1.1
TEST FACILITY ....................................................................................................................................... 3
CONTENTS ....................................................................................................................................................... 4
REVISION HISTORY ....................................................................................................................................... 5
GENERAL INFORMATION ............................................................................................................................. 6
4.1
4.2
4.3
GENERAL DESCRIPTION OF E.U.T........................................................................................................ 6
DETAILS OF E.U.T. ................................................................................................................................ 6
TEST MODE ........................................................................................................................................... 6
EQUIPMENT USED DURING TEST ............................................................................................................. 7
5.1
5.2
5.3
EQUIPMENT LIST.................................................................................................................................... 7
DESCRIPTION OF SUPPORT UNITS ........................................................................................................ 7
MEASUREMENT UNCERTAINTY.............................................................................................................. 7
TEST SUMMARY ............................................................................................................................................. 8
CONDUCTED EMISSION ............................................................................................................................... 9
7.1
7.2
7.3
7.4
RADIATED SPURIOUS EMISSIONS .......................................................................................................... 12
8.1
8.2
8.3
8.4
8.5
8.6
E.U.T. OPERATION ............................................................................................................................... 9
EUT SETUP ........................................................................................................................................... 9
MEASUREMENT DESCRIPTION .............................................................................................................. 9
CONDUCTED EMISSION TEST RESULT ................................................................................................ 10
EUT OPERATION ................................................................................................................................. 12
TEST SETUP ........................................................................................................................................ 13
SPECTRUM ANALYZER SETUP ............................................................................................................ 14
TEST PROCEDURE ............................................................................................................................... 14
CORRECTED AMPLITUDE & MARGIN CALCULATION ........................................................................... 14
SUMMARY OF TEST RESULTS ............................................................................................................. 15
BANDWIDTH MEASUREMENT................................................................................................................... 16
9.1
9.2
TEST PROCEDURE ............................................................................................................................... 16
TEST RESULT ...................................................................................................................................... 16
10
ANTENNA REQUIREMENT ......................................................................................................................... 17
11
FCC ID: 2AND8-72XXC RF EXPOSURE REPORT ................................................................................. 18
12
PHOTOGRAPHS – MODEL 72887-DR TEST SETUP PHOTOS ........................................................... 18
13
PHOTOGRAPHS - CONSTRUCTIONAL DETAILS ................................................................................. 18
13.1
13.2
MODEL 72887-DR – EXTERNAL PHOTOS .......................................................................................... 18
MODEL 72887-DR – INTERNAL PHOTOS ........................................................................................... 18
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S08120829-1W
Page 5 of 18
Revision History
Test report No.
Date of Receipt
sample
WTS18S08120829-1W
2018-08-10
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Date of
Test
2018-08-11 to
2018-08-21
Date of
Issue
Purpose
Comment
Approved
2018-09-13
original
N/A
Valid
Reference No.: WTS18S08120829-1W
Page 6 of 18
General Information
4.1 General Description of E.U.T.
Product:
Wireless Charger
Model(s):
72887-DR
Hardware Version:
18072800002 Rev1.0
Software Version:
Asc0305 Rev1.3
4.2 Details of E.U.T.
Operation Frequency:
112kHz to 205kHz
Type of Modulation:
ASK
Antenna installation:
Coil Antenna
Antenna Gain:
N/A
Ratings:
Input: DC 5V 2A
Output: DC 5V 1A
4.3 Test Mode
All test mode(s) and condition(s) mentioned were considered and evaluated respectively by
performing full tests, the worst data were recorded and reported.
Test mode
Test channel
Transmitting
175.19kHz
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S08120829-1W
Page 7 of 18
Equipment Used during Test
5.1 Equipment List
Conducted Emissions
Item
Equipment
Manufacturer
Model No.
Serial No.
Last
Calibration
Date
Calibration
Due Date
1.
EMI Test Receiver
R&S
ESCI
101155
2017-09-12
2018-09-11
2.
LISN
SCHWARZBECK
NSLK 8128
2017-09-12
2018-09-11
3.
Limiter
York
MTS-IMP-136
8128-289
261115-0010024
2017-09-12
2018-09-11
4.
Cable
LARGE
RF300
2017-09-12
2018-09-11
3m Semi-anechoic Chamber for Radiation Emissions
Item
Equipment
Manufacturer
Model No.
Serial No
Last
Calibration
Date
Calibration
Due Date
Test Receiver
R&S
ESCI
101296
2018-04-20
2019-04-19
Trilog Broadband
Antenna
SCHWARZBECK
VULB9160
9160-3325
2018-04-20
2019-04-19
Active Loop Antenna
Beijing Dazhi
ZN30900A
2018-04-20
2019-04-19
Amplifier
ANRITSU
MH648A
M43381
2018-04-20
2019-04-19
Cable
HUBER+SUHNER
CBL2
525178
2018-04-20
2019-04-19
Coaxial Cable
(below 1GHz)
Top
TYPE16
(13M)
2017-09-12
2018-09-11
RF Conducted Testing
Item
Equipment
Manufacturer
Model No.
Serial No.
Last
Calibration
Date
Calibration
Due Date
Spectrum Analyzer
R&S
FSP30
100091
2018-04-20
2019-04-19
5.2 Description of Support Units
Equipment
Manufacturer
Model No.
AC-DC ADAPTER
SIMSUKIAN
SK22G-0500200U
Smart Phone
SAMSUNG
S7
5.3 Measurement Uncertainty
Parameter
Uncertainty
± 1 x 10-6
± 1.0 dB
± 2.2 dB
± 5.03 dB (Bilog antenna 30M~1000MHz)
Radiated Spurious Emissions test
± 5.47 dB (Horn antenna 1000M~25000MHz)
Conducted Emissions test
± 3.64 dB (AC mains 150KHz~30MHz)
Confidence interval:95%. Confidence factor:k=2
Radio Frequency
RF Power
RF Power Density
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S08120829-1W
Page 8 of 18
Test Summary
Test Items
Test Requirement
Result
Conducted Emissions
15.207
Pass
Radiated Spurious Emissions
Bandwidth Measurement
Antenna Requirement
15.205(a)
15.209
15.205(a)
15.215(c)
15.203
Pass
Pass
Pass
Note: Pass =Compliance; NC=Not Compliance; NT=Not Tested; N/A=Not Applicable.
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S08120829-1W
Page 9 of 18
Conducted Emission
Test Requirement:
FCC CFR 47 Part 15 Section 15.207
Test Method:
ANSI C63.10:2013
Test Result:
PASS
Frequency Range:
150kHz to 30MHz
Class/Severity:
Class B
Limit:
Frequency (MHz)
0.15 to 0.5
0.5 to 5
5 to 30
Limit (dBμV)
Quasi-peak
Average
66 to 56
56 to 46
56
46
60
50
7.1 E.U.T. Operation
Operating Environment :
Temperature:
24.9 C
Humidity:
51.3 % RH
Atmospheric Pressure:
102.3kPa
EUT Operation :
The test was performed in transmitting mode, the test data were shown in the report.
7.2 EUT Setup
The conducted emission tests were performed using the setup accordance with the ANSI C63.10:2013.
0.4m
EUT
Receiver
PC System
0.8m
0.8m
LISN
:50 Terminator
7.3 Measurement Description
The maximised peak emissions from the EUT was scanned and measured for both the Live and
Neutral Lines. Quasi-peak & average measurements were performed if peak emissions were within
6dB of the average limit line.
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S08120829-1W
7.4 Conducted Emission Test Result
Live line:
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Page 10 of 18
Reference No.: WTS18S08120829-1W
Live N:
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Page 11 of 18
Reference No.: WTS18S08120829-1W
Page 12 of 18
Radiated Spurious Emissions
Test Requirement:
FCC Part15 Paragraph 15.209, 15.205(a)
Test Method:
ANSI C63.10:2013
Test Result:
PASS
Measurement Distance:
3m
Limit:
FCC Part15 Paragraph 15.209
Field Strength
Frequency
Field Strength Limit at 3m Measurement Dist
Distance
(MHz)
uV/m
0.009 ~ 0.490
2400/F(kHz)
0.490 ~ 1.705
uV/m
dBuV/m
300
10000 * 2400/F(kHz)
20log(2400/F(kHz)) + 80
24000/F(kHz)
30
100 * 24000/F(kHz)
20log(24000/F(kHz)) + 40
1.705 ~ 30
30
30
100 * 30
20log(30) + 40
30 ~ 88
100
100
20log(100)
88 ~ 216
150
150
20log(150)
216 ~ 960
200
200
20log(200)
Above 960
500
500
20log(500)
(m)
8.1 EUT Operation
Operating Environment :
Temperature:
25.2 C
Humidity:
52.1 % RH
Atmospheric Pressure:
102.3kPa
EUT Operation :
The test was performed in Transmitting mode, the test data were shown in the report.
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S08120829-1W
Page 13 of 18
8.2 Test Setup
The radiated emission tests were performed in the 3m Semi- Anechoic Chamber test site, using the
setup accordance with the ANSI C63.10:2013
The test setup for emission measurement below 30MHz.
Semi-anechoic 3m Chamber
Turn Table From 0°to 360°
3m
EUT
0.8m
Turn Table
PC
System
Spectrum
Analyzer
AMP
Combining
Network
The test setup for emission measurement from 30 MHz to 1 GHz.
Semi-anechoic 3m Chamber
Antenna Elevation Varies From 1 to 4 m
Turn Table From 0°to 360°
3m
EUT
0.8m
Turn Table
PC
System
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Spectrum
Analyzer
AMP
Combining
Network
Reference No.: WTS18S08120829-1W
Page 14 of 18
8.3 Spectrum Analyzer Setup
Below 30MHz
Sweep Speed .............................................. Auto
IF Bandwidth ................................................ 10kHz
Video Bandwidth.......................................... 10kHz
Resolution Bandwidth.................................. 10kHz
30MHz ~ 1GHz
Sweep Speed .............................................. Auto
Detector ..................................................... PK
Resolution Bandwidth .................................. 100kHz
Video Bandwidth.......................................... 300kHz
8.4 Test Procedure
1. The EUT is placed on a turntable, which is 0.8m above ground plane for below 1GHz and 1.5m
for above 1GHz.
2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission
level.
3. EUT is set 3m away from the receiving antenna, which is moved from 1m to 4m to find out the
maximum emissions. The spectrum was investigated from the lowest radio frequency signal
generated in the device, without going below 9 kHz, up to the tenth harmonic of the highest
fundamental frequency or to 40 GHz, whichever is lower.
4. Maximum procedure was performed on the six highest emissions to ensure EUT compliance.
5. And also, each emission was to be maximized by changing the polarization of receiving antenna
both horizontal and vertical.
6. Repeat above procedures until the measurements for all frequencies are complete.
7. The radiation measurements are tested under 3-axes(X,Y,Z) position(X denotes lying on the table,
Y denotes side stand and Z denotes vertical stand), After pre-test, It was found that the worse
radiation emission was get at the Z position. So the data shown was the Z position only.
8.5 Corrected Amplitude & Margin Calculation
The Corrected Amplitude is calculated by adding the Antenna Factor and Cable Factor, and
subtracting the Amplifier Gain from the Amplitude reading. The basic equation is as follows:
Corr. Ampl. = Indicated Reading + Antenna Factor + Cable Factor - Amplifier Gain
The “Margin” column of the following data tables indicates the degree of compliance with the
applicable limit. For example, a margin of -7dB means the emission is 7dB below the maximum limit
for Class B. The equation for margin calculation is as follows:
Margin = Corr. Ampl. – Limit
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S08120829-1W
Page 15 of 18
8.6 Summary of Test Results
Test Frequency: 9 kHz ~ 30 MHz
Receiver
Reading
(AV)
Turn table
Angle
(kHz)
(dBμV
@3m)
175.19
175.19
Frequency
RX Antenna
Corrected
Factor
Height
Polar
Degree
(m)
(H/V)
(dB/m)
52.63
59
1.0
43.37
146
1.2
FCC Part 15.209
Corrected
Amplitude
(AV)
Limit
Margin
(dBμV
@3m)
(dBμV/m
@3m
(dB)
15.94
68.57
102.73
-34.16
15.94
59.31
102.73
-43.42
Test Frequency: 30 MHz ~ 1 GHz
Frequency
Receiver
Reading
Turn
Detector
RX Antenna
table
Corrected
Angle
Height
Polar
Factor
FCC Part 15.209
Corrected
Amplitude
Limit
Margin
(MHz)
(dBμV)
QP
Degree
(m)
(H/V)
(dB)
(dBμV/m)
(dBμV/m)
(dB)
36.13
36.91
QP
115
1.1
-17.53
19.38
40.00
-20.62
36.13
53.63
QP
76
1.2
-17.53
36.10
40.00
-3.90
59.65
51.88
QP
208
1.1
-16.61
35.27
40.00
-4.73
59.65
50.97
QP
231
1.4
-16.61
34.36
40.00
-5.64
103.08
54.45
QP
243
2.0
-18.97
35.48
43.50
-8.02
103.08
57.06
QP
350
1.8
-18.97
38.09
43.50
-5.41
Note: Correct factor = Cable loss + Antenna factor
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S08120829-1W
Page 16 of 18
Bandwidth Measurement
Test Requirement:
FCC Part15.215(C), Part15.205 (a)
Test Method:
ANSI C63.10: 2013
9.1 Test Procedure
1. The transmitter output (antenna port) was connected to the spectrum analyzer in peak mode.
2. Bandwidth Measure the resolution bandwidth of 300 Hz and the video bandwidth of 1 kHz were
used.
3. Measured the spectrum width with power higher than 20dB below carrier and 99% Bandwidth.
9.2 Test Result
Frequency(kHz)
20dB Bandwidth
Emission(kHz)
99% Bandwidth
Emission(kHz)
175.19
0.786
0.666
Test Plot
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S08120829-1W
Page 17 of 18
10 Antenna Requirement
An intentional radiator shall be designed to ensure that no antenna other than that furnished by the
responsible party shall be used with the device. The use of a permanently attached antenna or of an
antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to
comply with the provisions of this section. The manufacturer may design the unit so that a broken
antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector
is prohibited. This requirement does not apply to carrier current devices or to devices operated
under the provisions of §15.211, §15.213, §15.217, §15.219, or §15.221. Further, this requirement
does not apply to intentional radiators that must be professionally installed, such as perimeter
protection systems and some field disturbance sensors, or to other intentional radiators which, in
accordance with §15.31(d), must be measured at the installation site. However, the installer shall be
responsible for ensuring that the proper antenna is employed so that the limits in this part are not
exceeded.
For intentional device, according to FCC 15 CFR Section 15.203, an intentional radiator shall be
designed to ensure that no antenna other than that furnished by the responsible party shall be used
with the device.
Result:
The EUT has one Coil antenna, Meets the requirements of FCC 15.203.
Coil antenna
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S08120829-1W
11
Page 18 of 18
FCC ID: 2AND8-72XXC RF Exposure Report
Note: Please refer to RF Exposure test report: WTS18S08120829-2W.
12 Photographs – Model 72887-DR Test Setup Photos
Note: Please refer to Photos: WTS18S08120829-3W.
13 Photographs - Constructional Details
13.1
Model 72887-DR – External Photos
Note: Please refer to Photos: WTS18S08120829-3W.
13.2
Model 72887-DR – Internal Photos
Note: Please refer to Photos: WTS18S08120829-3W.
======End of Report======
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Download: 72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .
Mirror Download [FCC.gov]72XXC Wireless Charger Test Report WTS18S08120829-1W_ CJ Global .
Document ID4018905
Application IDI/YckGTBmdLvB20cshimtQ==
Document Description14_72887-DR TestRpt
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize38.6kB (482546 bits)
Date Submitted2018-09-26 00:00:00
Date Available2018-09-26 00:00:00
Creation Date2018-09-13 14:49:45
Producing SoftwareAcrobat Distiller 11.0 (Windows)
Document Lastmod2018-09-13 14:50:30
Document TitleWTS18S08120829-1W_Test Report
Document CreatorPScript5.dll Version 5.2.2
Document Author: Administrator

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Administrator
Create Date                     : 2018:09:13 14:49:45+08:00
Modify Date                     : 2018:09:13 14:50:30+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Acrobat Distiller 11.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:09:13 14:50:30+08:00
Format                          : application/pdf
Title                           : Microsoft Word - WTS18S08120829-1W_Test Report
Creator                         : Administrator
Document ID                     : uuid:650e05fa-2d36-456b-b36b-674efc4970a7
Instance ID                     : uuid:cd6e5e30-7bf7-4d70-8bca-cbdf01bf9158
Page Count                      : 18