FCC ID 2ANDL-AXYU
Wi-Fi and Bluetooth Module
by Hangzhou Tuya Information Technology Co.,Ltd
Grantee Code: 2ANDL Product Code: AXYU
Latest application date: 2023-09-27
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-09-27 |
| 2402-2480 MHz | Original Equipment | 2022-01-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Installation guide | Users Manual | 2022-01-18 | PDF 693.2 KB |
| Internal Photos | Internal Photos | 2024-03-24 | PDF 229.9 KB |
| Internal Photos | Internal Photos | 2022-01-18 | PDF 297.5 KB |
| External Photos | External Photos | 2023-09-27 | PDF 216.1 KB |
| External Photos | External Photos | 2022-01-18 | PDF 591 KB |
| Label and Location | ID Label/Location Info | 2022-01-18 | PDF 138 KB |
| Test Setup Photos | Test Setup Photos | 2023-09-27 | PDF 569.8 KB |
| Setup Photos | Test Setup Photos | 2022-01-18 | PDF 560.3 KB |
| Antenna Specification | Test Report | 2023-09-27 | PDF 497.6 KB |
| BLE Test Report | Test Report | 2023-09-27 | PDF 3.5 MB |
| Wi-Fi Test Report Part 1 | Test Report | 2023-09-27 | PDF 4.9 MB |
| Wi-Fi Test Report Part 2 | Test Report | 2023-09-27 | PDF 2.3 MB |
| 7095021029112-00 Wi-Fi Report Part1 | Test Report | 2022-01-18 | PDF 2.6 MB |
| 7095021029112-00 Wi-Fi Report Part2 | Test Report | 2022-01-18 | PDF 4.8 MB |
| 7095021029113-00 BLE Report | Test Report | 2022-01-18 | PDF 4.1 MB |
| Attestation Statements US Agent | Attestation Statements | 2023-09-27 | PDF 87.3 KB |
| Covered Equipment Attestation | Attestation Statements | 2023-09-27 | PDF 122.5 KB |
| Agent Authorisation Letter | Cover Letter(s) | 2023-09-27 | PDF 24.1 KB |
| Class II permissive change request letter Rev1 | Cover Letter(s) | 2023-09-27 | PDF 58.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2023-09-27 | PDF 72.9 KB |
| FCC Modular Approval letter | Cover Letter(s) | 2022-01-18 | PDF 101 KB |
| FCC agent athorisation | Cover Letter(s) | 2022-01-18 | PDF 29.3 KB |
| FCC confidentiality | Cover Letter(s) | 2022-01-18 | PDF 78.4 KB |
| WiFi Channel 12 and 13 Declaration Letter | Cover Letter(s) | 2022-01-18 | PDF 91.2 KB |
| RF Exposure Information | RF Exposure Info | 2023-09-27 | PDF 141.1 KB |
| RF exposure report | RF Exposure Info | 2022-01-18 | PDF 315 KB |
| Block Diagram Metadata only | Block Diagram | PDF 518.8 KB | |
| PCB layout Metadata only | Schematics | PDF 37.6 KB | |
| Schematic Metadata only | Schematics | PDF 1.1 MB | |
| Schematic Metadata only | Schematics | PDF 1.9 MB | |
| Operational Description Metadata only | Operational Description | PDF 154.3 KB |
Application Information
| Application ID | oCtyc56gqRAWBAnOA9pgMg== |
|---|---|
| Final Action Date | 2023-09-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0026759332 |
| Model | AXYU |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wi-Fi and Bluetooth Module |
| Responsible Party | Linyun Li, Manager, lily@tuya.com  , +86-571-86581786 |
| Test Firm | Jian Qin, TUV SUD Certification and Testing (China) Co., Ltd, Jian.Qin@tuv-sud.cn  , 86 21 6148 7156 |
| TCB Email | Cookies.bu@tuvsud.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/24/2024 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change. Single Modular Approval. Power listed is conducted output power. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device operates in 20MHz and 40MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| oCtyc56gqRAWBAnOA9pgMg== | 2023-09-27 | Class II permissive change or modification of presently authorized equipment |
| XhTWcSq0CuS3r1HXrmIoIQ== | 2022-01-18 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application XhTWcSq0CuS3r1HXrmIoIQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT UNLIMITED Octagon House, Concorde Way Segensworth North Fareham, PO15 5RL United Kingdom |
Date of Grant: 01/18/2022 Application Dated: 01/14/2022 |
| Hangzhou Tuya Information Technology Co.,Ltd |
| Room701,Building3,More Center,No.87 GuDun Road, |
| Hangzhou,Zhejiang, China |
| Attention: xiaodong Shou , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANDL-AXYU |
| Name of Grantee: | Hangzhou Tuya Information Technology Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.31477 | |||
| 15C | 2422.0 - 2452.0 | 0.23878 | |||
| 15C | 2402.0 - 2480.0 | 0.00391 |
| Single Modular Approval. Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons to satisfy the requirements of 2.1091. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
EAS Grant - Application XhTWcSq0CuS3r1HXrmIoIQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hangzhou Tuya Information Technology Co.,Ltd Room701,Building3,More Center,No.87 GuDun Road, Hangzhou,Zhejiang, China |
Date of Grant: 01/18/2022 Application Dated: 01/14/2022 |
| Attention: xiaodong Shou , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANDL-AXYU |
| Name of Grantee: | Hangzhou Tuya Information Technology Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.31477 | |||
| 15C | 2422.0 - 2452.0 | 0.23878 | |||
| 15C | 2402.0 - 2480.0 | 0.00391 |
| Single Modular Approval. Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons to satisfy the requirements of 2.1091. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT UNLIMITED Octagon House, Concorde Way Segensworth North Fareham, PO15 5RL United Kingdom |
Date of Grant: 09/27/2023 Application Dated: 09/27/2023 |
| Hangzhou Tuya Information Technology Co.,Ltd |
| Room701,Building3,More Center,No.87 GuDun Road, |
| Hangzhou,Zhejiang, China |
| Attention: Linyun Li , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANDL-AXYU |
| Name of Grantee: | Hangzhou Tuya Information Technology Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.31477 | |||
| 15C | 2422.0 - 2452.0 | 0.23878 | |||
| 15C | 2402.0 - 2480.0 | 0.00391 |
| Class II permissive change. Single Modular Approval. Power listed is conducted output power. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device operates in 20MHz and 40MHz bandwidth modes. |
EAS Grant - Application oCtyc56gqRAWBAnOA9pgMg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hangzhou Tuya Information Technology Co.,Ltd Room701,Building3,More Center,No.87 GuDun Road, Hangzhou,Zhejiang, China |
Date of Grant: 09/27/2023 Application Dated: 09/27/2023 |
| Attention: Linyun Li , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANDL-AXYU |
| Name of Grantee: | Hangzhou Tuya Information Technology Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.31477 | |||
| 15C | 2422.0 - 2452.0 | 0.23878 | |||
| 15C | 2402.0 - 2480.0 | 0.00391 |
| Class II permissive change. Single Modular Approval. Power listed is conducted output power. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device operates in 20MHz and 40MHz bandwidth modes. |
| Mail To: |