FCC ID 2ANDL-CB2S
Wi-Fi and Bluetooth Module
by Hangzhou Tuya Information Technology Co.,Ltd
Grantee Code: 2ANDL Product Code: CB2S
Latest application date: 2024-05-15
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-05-15 |
| 2402-2480 MHz | Original Equipment | 2021-05-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Installation Guide | Users Manual | 2021-05-08 | PDF 547.1 KB |
| Internal Photos | Internal Photos | 2024-05-15 | PDF 414.1 KB |
| Internal Photos | Internal Photos | 2021-05-08 | PDF 721.7 KB |
| External Photos | External Photos | 2024-05-15 | PDF 395.1 KB |
| External Photos | External Photos | 2021-05-08 | PDF 360.2 KB |
| Label and Label Location | ID Label/Location Info | 2021-05-08 | PDF 299.5 KB |
| Test Setup Photos | Test Setup Photos | 2021-05-08 | PDF 1,005.5 KB |
| Antenna Specification | Test Report | 2024-05-15 | PDF 651.1 KB |
| Test Report for BLE | Test Report | 2024-05-15 | PDF 3.1 MB |
| Test Report for WiFi | Test Report | 2024-05-15 | PDF 3.1 MB |
| Test Report of BLE | Test Report | 2021-05-08 | PDF 2.6 MB |
| Test Report of Wi-Fi | Test Report | 2021-05-08 | PDF 4.8 MB |
| Attestation Statements US Agent | Attestation Statements | 2024-05-15 | PDF 126.5 KB |
| Covered Equipment Attestation | Attestation Statements | 2024-05-15 | PDF 119.5 KB |
| Modular Approval Attestation Letter | Cover Letter(s) | 2021-05-08 | PDF 85.9 KB |
| Class II permissive change request letter Rev1 | Cover Letter(s) | 2024-05-15 | PDF 113.6 KB |
| FCC Agent Authorisation Letter | Cover Letter(s) | 2024-05-15 | PDF 23.6 KB |
| FCC Confidentiality Letter Rev1 | Cover Letter(s) | 2024-05-15 | PDF 64.5 KB |
| Authorization Letter | Cover Letter(s) | 2021-05-08 | PDF 50.9 KB |
| Confidentiality Letter | Cover Letter(s) | 2021-05-08 | PDF 18.5 KB |
| Declaration Letter of Wi-Fi Channel | Cover Letter(s) | 2021-05-08 | PDF 92.4 KB |
| MPE Report | RF Exposure Info | 2024-05-15 | PDF 1.2 MB |
| MPE Report | RF Exposure Info | 2021-05-08 | PDF 217.6 KB |
| Block Diagram Metadata only | Block Diagram | PDF 29.7 KB | |
| PCB Layout Metadata only | Schematics | PDF 188.3 KB | |
| Schematic Metadata only | Schematics | PDF 49.8 KB | |
| Schematics Rev2 Metadata only | Schematics | PDF 128.7 KB | |
| Operational Description Metadata only | Operational Description | PDF 144.2 KB |
Application Information
| Application ID | e+5Z2wH5YM16nSV+WLJmBw== |
|---|---|
| Final Action Date | 2024-05-15 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0026759332 |
| Model | CB2S |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wi-Fi and Bluetooth Module |
| Responsible Party | Linyun Li, Manager, lily@tuya.com  , +86-571-86581786 |
| Agent | Wenqiang Wenqiang Wenqiang, TUV SUD Certification China, Wenqiang.Lu@tuvsud.com  , +862160379151 |
| Test Firm | Yi Ba, TUV SUD Certification and Testing (China) Co., Ltd, yi.ba@tuvsud.com , 86 21 6140 0132 |
| TCB Email | zhining.zhang@tuvsud.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change. Single Modular Approval. Power listed is conducted output power. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co- location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device operates in 20MHz and 40MHz bandwidth modes for Wi-Fi. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| e+5Z2wH5YM16nSV+WLJmBw== | 2024-05-15 | Class II permissive change or modification of presently authorized equipment |
| IkQGzO+6oH5HbW1lkdnLig== | 2021-05-08 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application IkQGzO+6oH5HbW1lkdnLig==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT UNLIMITED Octagon House, Concorde Way Segensworth North Fareham, PO15 5RL United Kingdom |
Date of Grant: 05/08/2021 Application Dated: 05/06/2021 |
| Hangzhou Tuya Information Technology Co.,Ltd |
| Room701,Building3,More Center,No.87 GuDun Road, |
| Hangzhou,Zhejiang, China |
| Attention: xiaodong Shou , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANDL-CB2S |
| Name of Grantee: | Hangzhou Tuya Information Technology Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00354 | |||
| 15C | 2412.0 - 2462.0 | 0.18113 | |||
| 15C | 2422.0 - 2452.0 | 0.13772 |
| Single Modular Approval. Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons to satisfy the requirements of 2.1091. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device operates in 20 MHz and 40MHz bandwidth modes. |
EAS Grant - Application IkQGzO+6oH5HbW1lkdnLig==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hangzhou Tuya Information Technology Co.,Ltd Room701,Building3,More Center,No.87 GuDun Road, Hangzhou,Zhejiang, China |
Date of Grant: 05/08/2021 Application Dated: 05/06/2021 |
| Attention: xiaodong Shou , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANDL-CB2S |
| Name of Grantee: | Hangzhou Tuya Information Technology Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00354 | |||
| 15C | 2412.0 - 2462.0 | 0.18113 | |||
| 15C | 2422.0 - 2452.0 | 0.13772 |
| Single Modular Approval. Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons to satisfy the requirements of 2.1091. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device operates in 20 MHz and 40MHz bandwidth modes. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT UNLIMITED Octagon House, Concorde Way Segensworth North Fareham, PO15 5RL United Kingdom |
Date of Grant: 05/15/2024 Application Dated: 05/14/2024 |
| Hangzhou Tuya Information Technology Co.,Ltd |
| Room 301,Building 1,Huace Center,Xihu District, |
| Hangzhou,Zhejiang, China |
| Attention: Linyun Li , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANDL-CB2S |
| Name of Grantee: | Hangzhou Tuya Information Technology Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00354 | |||
| 15C | 2412.0 - 2462.0 | 0.18113 | |||
| 15C | 2422.0 - 2452.0 | 0.13772 |
| Class II permissive change. Single Modular Approval. Power listed is conducted output power. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co- location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
This device operates in 20MHz and 40MHz bandwidth modes for Wi-Fi. |
EAS Grant - Application e+5Z2wH5YM16nSV+WLJmBw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hangzhou Tuya Information Technology Co.,Ltd Room 301,Building 1,Huace Center,Xihu District, Hangzhou,Zhejiang, China |
Date of Grant: 05/15/2024 Application Dated: 05/14/2024 |
| Attention: Linyun Li , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANDL-CB2S |
| Name of Grantee: | Hangzhou Tuya Information Technology Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00354 | |||
| 15C | 2412.0 - 2462.0 | 0.18113 | |||
| 15C | 2422.0 - 2452.0 | 0.13772 |
| Class II permissive change. Single Modular Approval. Power listed is conducted output power. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co- location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
This device operates in 20MHz and 40MHz bandwidth modes for Wi-Fi. |
| Mail To: |