FCC ID 2ANDL-WBR3T

WiFi&Bluetooth; Module

by Hangzhou Tuya Information Technology Co.,Ltd

Grantee Code: 2ANDL   Product Code: WBR3T
Latest application date: 2020-09-22

FCC ID Device Details

FCC ID2ANDL-WBR3T
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ANDL
Product CodeWBR3T
Applicant BusinessHangzhou Tuya Information Technology Co.,Ltd 🇨🇳
Related Domains tuya.com
Equipment ClassWiFi&Bluetooth; Module
Test FirmSporton International (Kunshan) Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2020-09-22
2402-2480 MHzOriginal Equipment2020-09-22

Exhibits

DocumentTypeAvailableFile
WBR3T_User manualUsers Manual2021-03-21PDF 629.4 KB
WBR3T_InPhoInternal Photos2021-03-21PDF 427 KB
WBR3T_ExPhoExternal Photos2021-03-21PDF 696.8 KB
WBR3T_LabelID Label/Location Info2020-09-22PDF 41.2 KB
WBR3T_Label LocationID Label/Location Info2020-09-22PDF 30 KB
WBR3T_Tsup_DTS_BLETest Setup Photos2021-03-21PDF 256.6 KB
WBR3T_Tsup_DTS_WLAN 2.4GTest Setup Photos2021-03-21PDF 257.5 KB
WBR3T_Tsup_NII_5G Band1,2,3Test Setup Photos2021-03-21PDF 222.3 KB
WBR3T_Tsup_NII_5G Band4Test Setup Photos2021-03-21PDF 222.3 KB
WBR3T_Tsup_NII_DFSTest Setup Photos2021-03-21PDF 200.5 KB
WBR3T_TestRpt_DTS_BLETest Report2020-09-22PDF 4.7 MB
WBR3T_TestRpt_DTS_WLAN 2.4GTest Report2020-09-22PDF 4.5 MB
WBR3T_TestRpt_NII_5G Band1,2,3Test Report2020-09-22PDF 2 MB
WBR3T_TestRpt_NII_5G Band4Test Report2020-09-22PDF 2.1 MB
WBR3T_TestRpt_NII_DFSTest Report2020-09-22PDF 974.6 KB
FCC DTS UNII DeclarationCover Letter(s)2020-09-22PDF 72.1 KB
Request for Modular Approval per section 15.212 requirementsCover Letter(s)2020-09-22PDF 104.4 KB
WBR3T_cvrltr_Adhoc Mode DeclarationCover Letter(s)2020-09-22PDF 85.9 KB
WBR3T_cvrltr_Long-term ConfidentialityCover Letter(s)2020-09-22PDF 76.3 KB
WBR3T_cvrltr_POACover Letter(s)2020-09-22PDF 93.8 KB
WBR3T_cvrltr_Short-term ConfidentialityCover Letter(s)2020-09-22PDF 93.1 KB
WBR3T_TestRpt_RFExpRF Exposure Info2020-09-22PDF 657.1 KB
WBR3T_BlckDic Metadata onlyBlock DiagramPDF 26.6 KB
WBR3T_SchemDic Metadata onlySchematicsPDF 56 KB
WBR3T_Device_SW_Security_Statement Metadata onlyOperational DescriptionPDF 67.8 KB
WBR3T_OpDes Metadata onlyOperational DescriptionPDF 271.2 KB
WBR3T_PartsLst Metadata onlyParts List/Tune Up InfoPDF 52.5 KB
WBR3T_TunPro Metadata onlyParts List/Tune Up InfoPDF 58.4 KB

Application Information

Application IDUOu1AIZjnCDjE8f0/768Nw==
Final Action Date2020-09-22
Application PurposeOriginal Equipment
Applicant FRN0026759332
ModelWBR3T
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWiFi&Bluetooth; Module
Responsible Partyxiaodong Shou, General Manager, mikeshou@tuya.com , +86-571-86581786
Test FirmJim Tsai, Sporton International (Kunshan) Inc., JimTsai@sporton.com.tw , +86 0512 57900158
TCB Emailbentje.holger@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date03/21/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is maximum Peak conducted. This device has integrated DTS transmitter certified under the same FCC ID. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11a/b/g/n, 20MHz and 40 MHz.

Applications

Application IDDatePurpose
UOu1AIZjnCDjE8f0/768Nw==2020-09-22Original Equipment
6e6I/G4G/8QnHnE27yNHxg==2020-09-22Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.008115CCC
2412-2462 MHz0.356515CCC
5180-5240 MHz0.034815ECC
5260-5320 MHz0.032115ECC
5500-5700 MHz0.035515ECC
5745-5825 MHz0.036215ECC

Grants

TCB Grant - Application UOu1AIZjnCDjE8f0/768Nw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 09/22/2020

Application Dated: 09/22/2020
Hangzhou Tuya Information Technology Co.,Ltd
Room701,Building3,More Center,No.87 GuDun Road,
Hangzhou,Zhejiang,
China
 
Attention: xiaodong Shou , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANDL-WBR3T
Name of Grantee:  Hangzhou Tuya Information Technology Co.,Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi&Bluetooth Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0348  
CC 15E 5260.0  -  5320.0 0.0321  
CC 15E 5500.0  -  5700.0 0.0355  
CC 15E 5745.0  -  5825.0 0.0362  

Output power is maximum Peak conducted. This device has integrated DTS transmitter certified under the same FCC ID. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11a/b/g/n, 20MHz and 40 MHz.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application UOu1AIZjnCDjE8f0/768Nw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hangzhou Tuya Information Technology Co.,Ltd
Room701,Building3,More Center,No.87 GuDun Road,
Hangzhou,Zhejiang,
China
  Date of Grant: 09/22/2020

Application Dated: 09/22/2020
 
Attention: xiaodong Shou , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANDL-WBR3T
Name of Grantee:  Hangzhou Tuya Information Technology Co.,Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi&Bluetooth Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0348  
CC 15E 5260.0  -  5320.0 0.0321  
CC 15E 5500.0  -  5700.0 0.0355  
CC 15E 5745.0  -  5825.0 0.0362  

Output power is maximum Peak conducted. This device has integrated DTS transmitter certified under the same FCC ID. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11a/b/g/n, 20MHz and 40 MHz.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 6e6I/G4G/8QnHnE27yNHxg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 09/22/2020

Application Dated: 09/21/2020
Hangzhou Tuya Information Technology Co.,Ltd
Room701,Building3,More Center,No.87 GuDun Road,
Hangzhou,Zhejiang,
China
 
Attention: xiaodong Shou , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANDL-WBR3T
Name of Grantee:  Hangzhou Tuya Information Technology Co.,Ltd
Equipment Class: Digital Transmission System
Notes: WiFi&Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0081  
CC 15C 2412.0  -  2462.0 0.3565  

Output power is maximum Peak conducted. This device has integrated UNII transmitter certified under the same FCC ID. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11a/b/g/n, 20MHz and 40 MHz.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 6e6I/G4G/8QnHnE27yNHxg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hangzhou Tuya Information Technology Co.,Ltd
Room701,Building3,More Center,No.87 GuDun Road,
Hangzhou,Zhejiang,
China
  Date of Grant: 09/22/2020

Application Dated: 09/21/2020
 
Attention: xiaodong Shou , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANDL-WBR3T
Name of Grantee:  Hangzhou Tuya Information Technology Co.,Ltd
Equipment Class: Digital Transmission System
Notes: WiFi&Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0081  
CC 15C 2412.0  -  2462.0 0.3565  

Output power is maximum Peak conducted. This device has integrated UNII transmitter certified under the same FCC ID. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11a/b/g/n, 20MHz and 40 MHz.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: