FCC ID 2ANFF-AMN42012
WHDI Video Receiver
by TQ-Systems GmbH
Grantee Code: 2ANFF Product Code: AMN42012
Latest application date: 2024-02-06
FCC ID Device Details
| FCC ID | 2ANFF-AMN42012 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ANFF |
| Product Code | AMN42012 |
| Applicant Business | TQ-Systems GmbH 🇩🇪 |
| Related Domains |  tq-group.com |
| Equipment Class | WHDI Video Receiver |
| Test Firm | CSA Group Bayern GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5190-5230 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-06 |
| 5190-5230 MHz | Change in identification of presently authorized equipment. Original FCC ID: VQSAMN42012 Grant Date: 12/27/2021 | 2023-07-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2024-02-06 | PDF 1.4 MB |
| Int Photos | Internal Photos | 2024-02-06 | PDF 2.5 MB |
| ext photos | External Photos | 2024-02-06 | PDF 493.8 KB |
| ext photos | External Photos | 2023-07-13 | PDF 374.9 KB |
| Label host | ID Label/Location Info | 2024-02-06 | PDF 272.6 KB |
| label and location | ID Label/Location Info | 2023-07-13 | PDF 203.4 KB |
| test setup photos | Test Setup Photos | 2024-02-06 | PDF 1.2 MB |
| test setup photos DFS | Test Setup Photos | 2024-02-06 | PDF 347 KB |
| DFS Report | Test Report | 2024-02-06 | PDF 2 MB |
| Test Report RX 15.407 | Test Report | 2024-02-06 | PDF 1.5 MB |
| Test Report RX MPE | Test Report | 2024-02-06 | PDF 557.4 KB |
| Antenna PCB | Attestation Statements | 2024-02-06 | PDF 303.5 KB |
| Antenna Slot | Attestation Statements | 2024-02-06 | PDF 226.2 KB |
| Attestation Letter US Agent | Attestation Statements | 2024-02-06 | PDF 485.6 KB |
| Attestation letter Covered equipment | Attestation Statements | 2024-02-06 | PDF 407.9 KB |
| Antenna Data Sheet | Attestation Statements | 2023-07-13 | PDF 869.3 KB |
| Antenna Data Sheet Array | Attestation Statements | 2023-07-13 | PDF 603.1 KB |
| Attestation Letter Covered Equip | Attestation Statements | 2023-07-13 | PDF 407.9 KB |
| Class II letter | Cover Letter(s) | 2024-02-06 | PDF 300.1 KB |
| PoA | Cover Letter(s) | 2024-02-06 | PDF 380.3 KB |
| Change in ID Request | Cover Letter(s) | 2023-07-13 | PDF 400.7 KB |
| PoA Agent | Cover Letter(s) | 2023-07-13 | PDF 88.9 KB |
| PoA for Change in ID | Cover Letter(s) | 2023-07-13 | PDF 193.1 KB |
| RF Exposure | RF Exposure Info | 2024-02-06 | PDF 557.4 KB |
| MPE UNII 1 | RF Exposure Info | 2023-07-13 | PDF 270.8 KB |
| MPE UNII 2 | RF Exposure Info | 2023-07-13 | PDF 265 KB |
| RF Exposure | RF Exposure Info | 2023-07-13 | PDF 430.8 KB |
| SW Security Descriptions Metadata only | SDR Software/Security Info. | PDF 265.9 KB | |
| SW Security Descriptions letter Metadata only | SDR Software/Security Info. | PDF 51.2 KB |
Application Information
| Application ID | ceJ6v4glTDeiyvbF5NjFTA== |
|---|---|
| Final Action Date | 2024-02-06 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0026768952 |
| Model | AMN42012 |
| Frequency Range | 5190-5230 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | WHDI Video Receiver |
| Responsible Party | Wolfgang Kuhnert, wolfgang.kuhnert@tq-group.com , +498316904530 |
| Agent | Marie-Luise Marie-Luise Marie-Luise, CSA Group Bayern GmbH, marie-luise.schuster@csagroup.org  , +4994249481 |
| Test Firm | Frank Scharnowski, CSA Group Bayern GmbH, frank.scharnowski@csagroup.org , 49-9424-9481-140 |
| TCB Email | Brandhorst.dirk@phoenix-testlab.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change. The Grantee integrates this modular transmitter into his own mobile categorized host device 4K WHDI Video Receiver using a new PCB Antenna (1.8 dBi) together with reduced power settings. Therefore, the modular type changes to Limited Single Modular approval. Power Output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This module is approved in mobile configuration. Only those antenna(s) tested with the device may be used with this transmitter. With regards to DFS operation, final products may require the submission of a permissive change application. OEM/Host integrator is responsible for complying with module installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ceJ6v4glTDeiyvbF5NjFTA== | 2024-02-06 | Class II permissive change or modification of presently authorized equipment |
| PkvfSzU2WzGNBR70SdHwVw== | 2023-07-13 | Change in identification of presently authorized equipment. Original FCC ID: VQSAMN42012 Grant Date: 12/27/2021 |
Equipment Authorization
Grants
TCB Grant - Application PkvfSzU2WzGNBR70SdHwVw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 07/13/2023 Application Dated: 07/13/2023 |
| TQ-Systems GmbH |
| Muehlstrasse 2 |
| Gut Delling |
| Seefeld, 82229 Germany |
| Attention: Wolfgang Kuhnert |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANFF-AMN42012 |
| Name of Grantee: | TQ-Systems GmbH |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless video trasmitter module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5190.0 - 5230.0 | 0.11376 | |||
| 15E | 5270.0 - 5310.0 | 0.11429 | |||
| 15E | 5510.0 - 5710.0 | 0.15276 | |||
| 15E | 5750.0 - 5830.0 | 0.13335 |
| Power Output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This module is approved in mobile configuration. Only those antenna(s) tested with the device may be used with this transmitter. With regards to DFS operation, final products may require the submission of a permissive change application. OEM/Host integrator is responsible for complying with module installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application PkvfSzU2WzGNBR70SdHwVw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TQ-Systems GmbH Muehlstrasse 2 Gut Delling Seefeld, 82229 Germany |
Date of Grant: 07/13/2023 Application Dated: 07/13/2023 |
| Attention: Wolfgang Kuhnert |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANFF-AMN42012 |
| Name of Grantee: | TQ-Systems GmbH |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless video trasmitter module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5190.0 - 5230.0 | 0.11376 | |||
| 15E | 5270.0 - 5310.0 | 0.11429 | |||
| 15E | 5510.0 - 5710.0 | 0.15276 | |||
| 15E | 5750.0 - 5830.0 | 0.13335 |
| Power Output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This module is approved in mobile configuration. Only those antenna(s) tested with the device may be used with this transmitter. With regards to DFS operation, final products may require the submission of a permissive change application. OEM/Host integrator is responsible for complying with module installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 02/06/2024 Application Dated: 02/06/2024 |
| TQ-Systems GmbH |
| Muehlstrasse 2 |
| Gut Delling |
| Seefeld, 82229 Germany |
| Attention: Wolfgang Kuhnert |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANFF-AMN42012 |
| Name of Grantee: | TQ-Systems GmbH |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WHDI Video Receiver |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5190.0 - 5230.0 | 0.05 | |||
| 15E | 5270.0 - 5310.0 | 0.047 | |||
| 15E | 5510.0 - 5710.0 | 0.051 | |||
| 15E | 5750.0 - 5830.0 | 0.036 |
| Class II Permissive Change. The Grantee integrates this modular transmitter into his own mobile categorized host device 4K WHDI Video Receiver using a new PCB Antenna (1.8 dBi) together with reduced power settings. Therefore, the modular type changes to Limited Single Modular approval. Power Output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This module is approved in mobile configuration. Only those antenna(s) tested with the device may be used with this transmitter. With regards to DFS operation, final products may require the submission of a permissive change application. OEM/Host integrator is responsible for complying with module installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application ceJ6v4glTDeiyvbF5NjFTA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TQ-Systems GmbH Muehlstrasse 2 Gut Delling Seefeld, 82229 Germany |
Date of Grant: 02/06/2024 Application Dated: 02/06/2024 |
| Attention: Wolfgang Kuhnert |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANFF-AMN42012 |
| Name of Grantee: | TQ-Systems GmbH |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WHDI Video Receiver |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5190.0 - 5230.0 | 0.05 | |||
| 15E | 5270.0 - 5310.0 | 0.047 | |||
| 15E | 5510.0 - 5710.0 | 0.051 | |||
| 15E | 5750.0 - 5830.0 | 0.036 |
| Class II Permissive Change. The Grantee integrates this modular transmitter into his own mobile categorized host device 4K WHDI Video Receiver using a new PCB Antenna (1.8 dBi) together with reduced power settings. Therefore, the modular type changes to Limited Single Modular approval. Power Output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This module is approved in mobile configuration. Only those antenna(s) tested with the device may be used with this transmitter. With regards to DFS operation, final products may require the submission of a permissive change application. OEM/Host integrator is responsible for complying with module installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: |