FCC ID 2ANI5SA220

SABRE Module

by Safetrust Inc

Grantee Code: 2ANI5   Product Code: SA220
Latest application date: 2022-08-03

FCC ID Device Details

FCC ID2ANI5SA220
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ANI5
Product CodeSA220
Applicant BusinessSafetrust Inc 🇺🇸
Related Domains safetrust.com
Equipment ClassSABRE Module
Test FirmHyundai C-Tech, Inc. dba HCT America, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5775 MHzOriginal Equipment2022-08-03
2402-2480 MHzOriginal Equipment2022-08-03

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2023-01-30PDF 610.4 KB
Internal PhotosInternal Photos2023-01-30PDF 500 KB
External PhotosExternal Photos2023-01-30PDF 670.7 KB
Label Location & InfoID Label/Location Info2022-08-03PDF 109 KB
Test Setup PhotoTest Setup Photos2023-01-30PDF 1 MB
Antenna SpecTest Report2022-08-03PDF 854.1 KB
Antenna Spec (BLE)Test Report2022-08-03PDF 322.7 KB
DTS Test Report (BLE)Test Report2022-08-03PDF 3.7 MB
FCC Co-location ReportTest Report2022-08-03PDF 846.6 KB
UNII Test ReportTest Report2022-08-03PDF 2.1 MB
Agent Authorization LetterCover Letter(s)2022-08-03PDF 170 KB
Confidentiality Request LetterCover Letter(s)2022-08-03PDF 130.4 KB
Modular Approval Declaration LetterCover Letter(s)2022-08-03PDF 179.5 KB
RF Exposure TestRF Exposure Info2022-08-03PDF 327.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 327.4 KB
Schematics Metadata onlySchematicsPDF 184.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 97.2 KB

Application Information

Application IDkbX9zdeDnGPeiTBqdMmRYA==
Final Action Date2022-08-03
Application PurposeOriginal Equipment
Applicant FRN0026788992
ModelSA220
Frequency Range5775 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionSABRE Module
Responsible PartyJack Bubany, Vice President, jbubany@safetrust.com , 3038004133
Test FirmTimothy Choi, Hyundai C-Tech, Inc. dba HCT America, Inc., timothy.c@hctamerica.com , 510-933-8848
TCB EmailTCB@hctamerica.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date01/30/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval. Power output is conducted. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no access to the antennas/connectors.

Applications

Application IDDatePurpose
kbX9zdeDnGPeiTBqdMmRYA==2022-08-03Original Equipment
8I0UCOqTSwCej69yjimCVg==2022-08-03Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.00059115CCC
2402-2480 MHz0.00072315CCC
5745-5825 MHz0.0061715ECC
5755-5795 MHz0.0059615ECC
5775 MHz0.0039915ECC

Grants

TCB Grant - Application kbX9zdeDnGPeiTBqdMmRYA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  HCT America LLC
1726 Ringwood Avenue
San Jose, CA 95131
Date of Grant: 08/03/2022

Application Dated: 08/03/2022
Safetrust Inc
8116 Mill Creek Rd
Fremont, CA 94539
 
Attention: Jack Bubany , Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANI5SA220
Name of Grantee:  Safetrust Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: SABRE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5745.0  -  5825.0 0.00617  
CC 15E 5755.0  -  5795.0 0.00596  
CC 15E 5775.0  -  5775.0 0.00399  

Modular Approval. Power output is conducted. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no access to the antennas/connectors.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application kbX9zdeDnGPeiTBqdMmRYA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Safetrust Inc
8116 Mill Creek Rd
Fremont, CA 94539
United States
  Date of Grant: 08/03/2022

Application Dated: 08/03/2022
 
Attention: Jack Bubany , Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANI5SA220
Name of Grantee:  Safetrust Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: SABRE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5745.0  -  5825.0 0.00617  
CC 15E 5755.0  -  5795.0 0.00596  
CC 15E 5775.0  -  5775.0 0.00399  

Modular Approval. Power output is conducted. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no access to the antennas/connectors.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 8I0UCOqTSwCej69yjimCVg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  HCT America LLC
1726 Ringwood Avenue
San Jose, CA 95131
Date of Grant: 08/03/2022

Application Dated: 08/03/2022
Safetrust Inc
8116 Mill Creek Rd
Fremont, CA 94539
 
Attention: Jack Bubany , Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANI5SA220
Name of Grantee:  Safetrust Inc
Equipment Class: Digital Transmission System
Notes: SABRE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.000591  
CC 15C 2402.0  -  2480.0 0.000723  

Modular Approval. Power output is conducted. This device contains 2 Bluetooth Low Energy transmitters and an additional receiver. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no access to the antennas/connectors.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 8I0UCOqTSwCej69yjimCVg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Safetrust Inc
8116 Mill Creek Rd
Fremont, CA 94539
United States
  Date of Grant: 08/03/2022

Application Dated: 08/03/2022
 
Attention: Jack Bubany , Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANI5SA220
Name of Grantee:  Safetrust Inc
Equipment Class: Digital Transmission System
Notes: SABRE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.000591  
CC 15C 2402.0  -  2480.0 0.000723  

Modular Approval. Power output is conducted. This device contains 2 Bluetooth Low Energy transmitters and an additional receiver. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no access to the antennas/connectors.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: