FCC ID 2ANM3T8812C1

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024

Date of Grant: 07/22/2024 Application Dated: 07/18/2024

Shenzhen Chuangwei-RGB Electronics Co., Ltd.

13F-16F,Unit A,Skyworth Building,Shennan Road,

Nanshan District,Shenzhen

Shenzhen, 518108 China

Attention: Dan Fang

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ANM3T8812C1
Name of Grantee:	Shenzhen Chuangwei-RGB Electronics Co., Ltd.
Equipment Class:	Digital Transmission System
Notes:	WIFI Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.0769
CC MO	15C	2422.0  -  2452.0	0.0274

Power Output listed is conducted. Single Modular Approval. Device is an 802.11b/g/n device containing a 2 x 2 MIMO configuration and enabled for 2.4 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 3.14 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device supports 20MHz and 40MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Shenzhen Chuangwei-RGB Electronics Co., Ltd. 13F-16F,Unit A,Skyworth Building,Shennan Road, Nanshan District,Shenzhen Shenzhen, 518108 China

Date of Grant: 07/22/2024 Application Dated: 07/18/2024

Attention: Dan Fang

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ANM3T8812C1
Name of Grantee:	Shenzhen Chuangwei-RGB Electronics Co., Ltd.
Equipment Class:	Digital Transmission System
Notes:	WIFI Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.0769
CC MO	15C	2422.0  -  2452.0	0.0274

Power Output listed is conducted. Single Modular Approval. Device is an 802.11b/g/n device containing a 2 x 2 MIMO configuration and enabled for 2.4 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 3.14 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device supports 20MHz and 40MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application /614QJdpe567aw+g6PoALQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024

Date of Grant: 07/22/2024 Application Dated: 07/22/2024

Shenzhen Chuangwei-RGB Electronics Co., Ltd.

13F-16F,Unit A,Skyworth Building,Shennan Road,

Nanshan District,Shenzhen

Shenzhen, 518108 China

Attention: Dan Fang

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ANM3T8812C1
Name of Grantee:	Shenzhen Chuangwei-RGB Electronics Co., Ltd.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	WIFI Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.053
CC MO	15E	5190.0  -  5230.0	0.0173
CC MO	15E	5210.0  -  5210.0	0.0145
CC MO	15E	5260.0  -  5320.0	0.0622
CC MO	15E	5270.0  -  5310.0	0.0445
CC MO	15E	5290.0  -  5290.0	0.0277
CC MO	15E	5500.0  -  5700.0	0.061
CC MO	15E	5510.0  -  5670.0	0.042
CC MO	15E	5530.0  -  5610.0	0.0275
CC MO	15E	5745.0  -  5825.0	0.0615
CC MO	15E	5755.0  -  5795.0	0.0441
CC MO	15E	5775.0  -  5775.0	0.0284

Power Output listed is conducted. Single Modular Approval. Device is an 802.11a/n/ac device containing a 2 x 2 MIMO configuration and enabled for 5 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 3.28 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device supports 20MHz, 40MHz and 80MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Shenzhen Chuangwei-RGB Electronics Co., Ltd. 13F-16F,Unit A,Skyworth Building,Shennan Road, Nanshan District,Shenzhen Shenzhen, 518108 China

Date of Grant: 07/22/2024 Application Dated: 07/22/2024

Attention: Dan Fang

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ANM3T8812C1
Name of Grantee:	Shenzhen Chuangwei-RGB Electronics Co., Ltd.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	WIFI Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.053
CC MO	15E	5190.0  -  5230.0	0.0173
CC MO	15E	5210.0  -  5210.0	0.0145
CC MO	15E	5260.0  -  5320.0	0.0622
CC MO	15E	5270.0  -  5310.0	0.0445
CC MO	15E	5290.0  -  5290.0	0.0277
CC MO	15E	5500.0  -  5700.0	0.061
CC MO	15E	5510.0  -  5670.0	0.042
CC MO	15E	5530.0  -  5610.0	0.0275
CC MO	15E	5745.0  -  5825.0	0.0615
CC MO	15E	5755.0  -  5795.0	0.0441
CC MO	15E	5775.0  -  5775.0	0.0284

Power Output listed is conducted. Single Modular Approval. Device is an 802.11a/n/ac device containing a 2 x 2 MIMO configuration and enabled for 5 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 3.28 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device supports 20MHz, 40MHz and 80MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: