FCC ID 2ANM9-EAGLE1

Aviation Head up display

by EPIC OPTIX, INC.

Grantee Code: 2ANM9   Product Code: EAGLE1
Latest application date: 2017-09-20

FCC ID Device Details

FCC ID2ANM9-EAGLE1
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ANM9
Product CodeEAGLE1
Applicant BusinessEPIC OPTIX, INC. 🇺🇸
Related Domains epicoptix.com
Equipment ClassAviation Head up display
Test FirmQTC Certification & Testing Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2017-09-20
2412-2462 MHzOriginal Equipment2017-09-20

Exhibits

DocumentTypeAvailableFile
User Manual 1Users Manual2017-09-20PDF 3.2 MB
User Manual 2Users Manual2017-09-20PDF 21.4 KB
Internal PhotosInternal Photos2017-09-20PDF 1 MB
External PhotosExternal Photos2017-09-20PDF 420 KB
Label and LocationID Label/Location Info2017-09-20PDF 116.8 KB
Test Setup PhotosTest Setup Photos2017-09-20PDF 153.4 KB
Test ReportTest Report2017-09-20PDF 2.1 MB
Test ReportTest Report2017-09-20PDF 1.2 MB
NII Software Configuration Control DeclarationAttestation Statements2017-09-20PDF 156.5 KB
Authorization LetterCover Letter(s)2017-09-20PDF 77.7 KB
Confidentiality LetterCover Letter(s)2017-09-20PDF 98.6 KB
RF Exposure ReportRF Exposure Info2017-09-20PDF 128 KB
Block Diagram Metadata onlyBlock DiagramPDF 2.1 MB
Schematics Metadata onlySchematicsPDF 518.1 KB
NII Software security operational description Metadata onlySDR Software/Security InfPDF 579.2 KB
Operational Description Metadata onlyOperational DescriptionPDF 36.2 KB

Application Information

Application IDl51RZMz/Gqq7IKO2oNfwkg==
Final Action Date2017-09-20
Application PurposeOriginal Equipment
Applicant FRN0026813113
ModelEAGLE1
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionAviation Head up display
Responsible PartyRay Kwong, CEO, ray.kwong@epicoptix.com , 1-443-716-0600
Technical ContactMark Koop, Teleconformity, mark.koop@teleconformity.com , +31 84 8395867
Test FirmAlan Zhou, QTC Certification & Testing Co., Ltd., alan.zhou@qtclab.com , 86-0755-33916437
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
l51RZMz/Gqq7IKO2oNfwkg==2017-09-20Original Equipment
YS5Uzq2IUOTLAp/Pkoc7Jg==2017-09-20Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.015300015CCC
5180-5240 MHz0.049215E38, CC
5745-5825 MHz0.049115E38, CC

Grants

TCB Grant - Application YS5Uzq2IUOTLAp/Pkoc7Jg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 09/20/2017

Application Dated: 09/20/2017
EPIC OPTIX, INC.
1419 Forest Drive Suite 201,
Annapolis, MD 21403
 
Attention: Ray Kwong , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANM9-EAGLE1
Name of Grantee:  EPIC OPTIX, INC.
Equipment Class: Digital Transmission System
Notes: Aviation Head up display
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0153  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application YS5Uzq2IUOTLAp/Pkoc7Jg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

EPIC OPTIX, INC.
1419 Forest Drive Suite 201,
Annapolis, MD 21403
United States
  Date of Grant: 09/20/2017

Application Dated: 09/20/2017
 
Attention: Ray Kwong , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANM9-EAGLE1
Name of Grantee:  EPIC OPTIX, INC.
Equipment Class: Digital Transmission System
Notes: Aviation Head up display
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0153  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application l51RZMz/Gqq7IKO2oNfwkg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 09/20/2017

Application Dated: 09/20/2017
EPIC OPTIX, INC.
1419 Forest Drive Suite 201,
Annapolis, MD 21403
 
Attention: Ray Kwong , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANM9-EAGLE1
Name of Grantee:  EPIC OPTIX, INC.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Aviation Head up display
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0492  
38 CC 15E 5745.0  -  5825.0 0.0491  

Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application l51RZMz/Gqq7IKO2oNfwkg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

EPIC OPTIX, INC.
1419 Forest Drive Suite 201,
Annapolis, MD 21403
United States
  Date of Grant: 09/20/2017

Application Dated: 09/20/2017
 
Attention: Ray Kwong , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANM9-EAGLE1
Name of Grantee:  EPIC OPTIX, INC.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Aviation Head up display
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0492  
38 CC 15E 5745.0  -  5825.0 0.0491  

Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: