FCC ID 2ANMU-OT9

Tablet

by SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD

Grantee Code: 2ANMU   Product Code: OT9
Latest application date: 2024-09-11

FCC ID Device Details

FCC ID2ANMU-OT9
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ANMU
Product CodeOT9
Applicant BusinessSHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD 🇨🇳
Equipment ClassTablet
Test FirmShenzhen NTEK Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2024-09-11
5180-5240 MHzOriginal Equipment2024-09-11
2402-2480 MHzOriginal Equipment2024-09-11

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2025-03-10PDF 2.8 MB
Internal photosInternal Photos2025-03-10PDF 1.6 MB
External PhotosExternal Photos2025-03-10PDF 508.5 KB
LabelID Label/Location Info2024-09-11PDF 390.1 KB
Test Setup Photo DTSTest Setup Photos2025-03-10PDF 883.9 KB
Test Setup Photo SARTest Setup Photos2025-03-10PDF 179.8 KB
Test Setup Photos DSSTest Setup Photos2025-03-10PDF 883.9 KB
Test Setup Photos NllTest Setup Photos2025-03-10PDF 1.2 MB
Antenna SpecificationTest Report2024-09-11PDF 1,007.9 KB
Test Report 2.4g WiFi 1Test Report2024-09-11PDF 3.4 MB
Test Report 2.4g WiFi 2Test Report2024-09-11PDF 3.4 MB
Test Report 5G WiFi1Test Report2024-09-11PDF 5 MB
Test Report 5G WiFi2Test Report2024-09-11PDF 5 MB
Test Report 5G WiFi3Test Report2024-09-11PDF 2.1 MB
Test Report 5GWIFITest Report2024-09-11PDF 1.2 MB
Test Report BT1Test Report2024-09-11PDF 5 MB
Test Report BT2Test Report2024-09-11PDF 2.8 MB
Test Report LETest Report2024-09-11PDF 3.3 MB
Test Report SAR 1RF Exposure Info2024-09-11PDF 3.9 MB
Test Report SAR 2RF Exposure Info2024-09-11PDF 3.4 MB
2.911 (d)(5)(i)CertificationEquipmentTypev1.2Attestation Statements2024-09-11PDF 84.3 KB
2.911 (d)(5)(ii)CertificiationApplicantv1.2Attestation Statements2024-09-11PDF 80.7 KB
2.911 (d)(7) US Agent for Service of Process v1.4Attestation Statements2024-09-11PDF 116.2 KB
FCC Short & Long Term Confidentiality Request Rev4.1Cover Letter(s)2024-09-11PDF 24.2 KB
FCC Software Configuration Control DeclarationCover Letter(s)2024-09-11PDF 44.2 KB
Letter of Authorization Rev 1.0Cover Letter(s)2024-09-11PDF 26.1 KB
Model Difference DeclarationCover Letter(s)2024-09-11PDF 42.7 KB
SAR Report 1RF Exposure Info2024-09-11PDF 3.9 MB
SAR Report 2RF Exposure Info2024-09-11PDF 3.4 MB
Block Metadata onlyBlock DiagramPDF 137.6 KB
SCH Metadata onlySchematicsPDF 564.7 KB
OP Metadata onlyOperational DescriptionPDF 199 KB
FCCSoftwareSecurityRequirementsforUNIIdevices Metadata onlySDR Software/Security Info.PDF 141.2 KB

Application Information

Application IDGuZ6vWUGfljhPf3LGMD6Sg==
Final Action Date2024-09-11
Application PurposeOriginal Equipment
Applicant FRN0026810242
ModelOT9
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionTablet
Responsible PartyGaolei Yan, Manager, okygl2011@163.com , 0755-61156588
Technical ContactSHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD, okygl2011@163.com
Test FirmAlex Li, Shenzhen NTEK Testing Technology Co., Ltd., certification@ntek.org.cn , +86-755-6115-9384
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date03/10/2025
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 mm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn and simultaneous SAR accessory are 0.29 W/kg and 0.95 W/kg respectively.

Applications

Application IDDatePurpose
GuZ6vWUGfljhPf3LGMD6Sg==2024-09-11Original Equipment
DLFQV/joAg9PO9ORbfmHmw==2024-09-11Original Equipment
62ZnFCUZTPZVuKrl9B4umw==2024-09-11Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.003650015CCC
2402-2480 MHz0.0013415CCC
2412-2462 MHz0.0350815CCC
5180-5240 MHz0.0190115ECC
5745-5825 MHz0.0185415ECC

Grants

TCB Grant - Application GuZ6vWUGfljhPf3LGMD6Sg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 09/11/2024

Application Dated: 09/11/2024
SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD
A2 2F BUILDING ENET NEW INDUSTRIAL PARK,
DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA
SHENZHEN, 518XXX
China
 
Attention: Gaolei Yan , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANMU-OT9
Name of Grantee:  SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD
Equipment Class: Digital Transmission System
Notes: Tablet
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00134  
CC 15C 2412.0  -  2462.0 0.03508  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 mm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn and simultaneous SAR accessory are 0.29 W/kg and 0.95 W/kg respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application GuZ6vWUGfljhPf3LGMD6Sg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD
A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA
SHENZHEN, 518XXX
China
  Date of Grant: 09/11/2024

Application Dated: 09/11/2024
 
Attention: Gaolei Yan , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANMU-OT9
Name of Grantee:  SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD
Equipment Class: Digital Transmission System
Notes: Tablet
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00134  
CC 15C 2412.0  -  2462.0 0.03508  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 mm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn and simultaneous SAR accessory are 0.29 W/kg and 0.95 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application DLFQV/joAg9PO9ORbfmHmw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 09/11/2024

Application Dated: 09/11/2024
SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD
A2 2F BUILDING ENET NEW INDUSTRIAL PARK,
DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA
SHENZHEN, 518XXX
China
 
Attention: Gaolei Yan , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANMU-OT9
Name of Grantee:  SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Tablet
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.01901  
CC 15E 5745.0  -  5825.0 0.01854  

Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 mm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn and simultaneous SAR accessory are 0.79 W/kg and 0.95 W/kg respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application DLFQV/joAg9PO9ORbfmHmw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD
A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA
SHENZHEN, 518XXX
China
  Date of Grant: 09/11/2024

Application Dated: 09/11/2024
 
Attention: Gaolei Yan , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANMU-OT9
Name of Grantee:  SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Tablet
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.01901  
CC 15E 5745.0  -  5825.0 0.01854  

Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 mm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn and simultaneous SAR accessory are 0.79 W/kg and 0.95 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 62ZnFCUZTPZVuKrl9B4umw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 09/11/2024

Application Dated: 09/11/2024
SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD
A2 2F BUILDING ENET NEW INDUSTRIAL PARK,
DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA
SHENZHEN, 518XXX
China
 
Attention: Gaolei Yan , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANMU-OT9
Name of Grantee:  SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Tablet
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00365  

Output power listed is conducted power.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 62ZnFCUZTPZVuKrl9B4umw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD
A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA
SHENZHEN, 518XXX
China
  Date of Grant: 09/11/2024

Application Dated: 09/11/2024
 
Attention: Gaolei Yan , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANMU-OT9
Name of Grantee:  SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Tablet
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00365  

Output power listed is conducted power.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: