FCC ID 2ANOG-A76D

Wireless Smart Audio Module

by Linkplay Technology Inc.

Grantee Code: 2ANOG   Product Code: A76D
Latest application date: 2017-10-10

FCC ID Device Details

FCC ID2ANOG-A76D
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ANOG
Product CodeA76D
Applicant BusinessLinkplay Technology Inc. 🇨🇳
Related Domains linkplay.com
Equipment ClassWireless Smart Audio Module
Test FirmShenzhen SEM.Test Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2017-10-10
5180-5240 MHzOriginal Equipment2017-10-10
2402-2480 MHzOriginal Equipment2017-10-10

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2017-10-10PDF 711.9 KB
Internal PhotosInternal Photos2017-10-10PDF 1.7 MB
External PhotosExternal Photos2017-10-10PDF 803.2 KB
Label InfoID Label/Location Info2017-10-10PDF 82.6 KB
Label Info & LocationID Label/Location Info2017-10-10PDF 82.6 KB
Test Setup Photos DSS+DTS+NIITest Setup Photos2017-10-10PDF 180.7 KB
Test Report BT DSSTest Report2017-10-10PDF 592.6 KB
Test Report BT DTSTest Report2017-10-10PDF 332.8 KB
Test Report WIFI NIITest Report2017-10-10PDF 1.7 MB
Test Report WiFi DTSTest Report2017-10-10PDF 679 KB
Confidentiality LetterCover Letter(s)2017-10-10PDF 550.8 KB
Confidentiality Request LetterCover Letter(s)2017-10-10PDF 550.8 KB
Confidentilaity LetterCover Letter(s)2017-10-10PDF 550.8 KB
Modular Approval LetterCover Letter(s)2017-10-10PDF 706.8 KB
POACover Letter(s)2017-10-10PDF 429.2 KB
Power of AttorneyCover Letter(s)2017-10-10PDF 429.2 KB
Request Modular ApprovalCover Letter(s)2017-10-10PDF 706.8 KB
MPE ReportRF Exposure Info2017-10-10PDF 32.5 KB
RF ExposureRF Exposure Info2017-10-10PDF 32.5 KB
RF Exposure Info MPERF Exposure Info2017-10-10PDF 32.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 102.4 KB
Schematics Metadata onlySchematicsPDF 456.1 KB
Operational Description Metadata onlyOperational DescriptionPDF 24.3 KB
Software Security Requirements Metadata onlySDR Software/Security InfPDF 3 MB

Application Information

Application IDw/NP2ax1+TDV6HKlJ7UANw==
Final Action Date2017-10-10
Application PurposeOriginal Equipment
Applicant FRN0026818245
ModelA76D
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionWireless Smart Audio Module
Responsible Partycunxue wang, HW Manager, cunxue.wang@linkplay.com , (86) 13382175700
Test FirmJandy So, Shenzhen SEM.Test Technology Co., Ltd., jandyso@semtest.com.cn , 086-755-33663308
TCB Emailtei@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Power listed is conducted. OEM installation required. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 centimeters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
w/NP2ax1+TDV6HKlJ7UANw==2017-10-10Original Equipment
MrrzjYZWqF4k0rVgONLmUQ==2017-10-10Original Equipment
Km36drBirLpPkp8R7oJMkQ==2017-10-10Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.003100015CCC
2402-2480 MHz0.002815CCC
2412-2462 MHz0.043715CCC
5180-5240 MHz0.014615E38, CC
5745-5825 MHz0.012115E38, CC

Grants

TCB Grant - Application w/NP2ax1+TDV6HKlJ7UANw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 10/10/2017

Application Dated: 10/10/2017
Linkplay Technology Inc.
8F-8036, Qianren Building, No.7,
Yingcui Road, Jiangning District
Nanjing, 211100
China
 
Attention: cunxue wang , HW Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANOG-A76D
Name of Grantee:  Linkplay Technology Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Smart Audio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0031  

Single Modular Approval. Power listed is conducted. OEM installation required. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 centimeters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application w/NP2ax1+TDV6HKlJ7UANw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Linkplay Technology Inc.
8F-8036, Qianren Building, No.7, Yingcui Road, Jiangning District
Nanjing, 211100
China
  Date of Grant: 10/10/2017

Application Dated: 10/10/2017
 
Attention: cunxue wang , HW Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANOG-A76D
Name of Grantee:  Linkplay Technology Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Smart Audio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0031  

Single Modular Approval. Power listed is conducted. OEM installation required. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 centimeters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application MrrzjYZWqF4k0rVgONLmUQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 10/10/2017

Application Dated: 10/10/2017
Linkplay Technology Inc.
8F-8036, Qianren Building, No.7,
Yingcui Road, Jiangning District
Nanjing, 211100
China
 
Attention: cunxue wang , HW Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANOG-A76D
Name of Grantee:  Linkplay Technology Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Smart Audio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0146  
38 CC 15E 5745.0  -  5825.0 0.0121  

Single Modular Approval. Power listed is conducted. OEM installation required. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 centimeters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application MrrzjYZWqF4k0rVgONLmUQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Linkplay Technology Inc.
8F-8036, Qianren Building, No.7, Yingcui Road, Jiangning District
Nanjing, 211100
China
  Date of Grant: 10/10/2017

Application Dated: 10/10/2017
 
Attention: cunxue wang , HW Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANOG-A76D
Name of Grantee:  Linkplay Technology Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Smart Audio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0146  
38 CC 15E 5745.0  -  5825.0 0.0121  

Single Modular Approval. Power listed is conducted. OEM installation required. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 centimeters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Km36drBirLpPkp8R7oJMkQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 10/10/2017

Application Dated: 10/10/2017
Linkplay Technology Inc.
8F-8036, Qianren Building, No.7,
Yingcui Road, Jiangning District
Nanjing, 211100
China
 
Attention: cunxue wang , HW Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANOG-A76D
Name of Grantee:  Linkplay Technology Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Smart Audio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0437  
CC 15C 2402.0  -  2480.0 0.0028  

Single Modular Approval. Power listed is conducted. OEM installation required. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 centimeters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Km36drBirLpPkp8R7oJMkQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Linkplay Technology Inc.
8F-8036, Qianren Building, No.7, Yingcui Road, Jiangning District
Nanjing, 211100
China
  Date of Grant: 10/10/2017

Application Dated: 10/10/2017
 
Attention: cunxue wang , HW Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANOG-A76D
Name of Grantee:  Linkplay Technology Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Smart Audio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0437  
CC 15C 2402.0  -  2480.0 0.0028  

Single Modular Approval. Power listed is conducted. OEM installation required. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 centimeters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: