FCC ID 2ANPT-43753

Catit PIXI Smart Feeder Vision

by Rolf C. Hagen Inc

Grantee Code: 2ANPT   Product Code: 43753
Latest application date: 2022-10-16

FCC ID Device Details

FCC ID2ANPT-43753
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ANPT
Product Code43753
Applicant BusinessRolf C. Hagen Inc 🇨🇦
Related Domains rchagen.com sgs.com
Equipment ClassCatit PIXI Smart Feeder Vision
Test FirmCompliance Certification Services (Kunshan) Inc

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2422-2452 MHzOriginal Equipment2022-10-16
5755-5795 MHzOriginal Equipment2022-10-16

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2023-04-15PDF 1.5 MB
Internal PhotoInternal Photos2023-04-15PDF 3.1 MB
External PhotoExternal Photos2023-04-15PDF 885.7 KB
LabelID Label/Location Info2022-10-16PDF 907.7 KB
Test Setup PhotoTest Setup Photos2023-04-15PDF 362.9 KB
Antenna InformationTest Report2022-10-16PDF 680.3 KB
Test ReportTest Report2022-10-16PDF 2.3 MB
Test ReportTest Report2022-10-16PDF 5.9 MB
Authorization LetterCover Letter(s)2022-10-16PDF 43 KB
Channel StatementCover Letter(s)2022-10-16PDF 27.2 KB
Confidentiality LetterCover Letter(s)2022-10-16PDF 118.7 KB
RF Exposure ReportRF Exposure Info2022-10-16PDF 421.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 21.4 KB
Schematics Metadata onlySchematicsPDF 303.8 KB
Operational Description Metadata onlyOperational DescriptionPDF 214.2 KB
SOFTWARE SECURITY DECLARATION Metadata onlySDR Software/Security InfPDF 172.5 KB

Application Information

Application IDEH4iueGrds9wTp6Gi4NWLg==
Final Action Date2022-10-16
Application PurposeOriginal Equipment
Applicant FRN0026829036
Model43753
Frequency Range2422-2452 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionCatit PIXI Smart Feeder Vision
Responsible PartyRobert Reid, Aquatic Brands Manager, robert.reid@rchagen.com , +1 514 4570914
Technical ContactWinkey Wang, Compliance Certification Services (Kunshan) Inc, winkey.wang@sgs.com , +8613510914121
Non-Technical ContactWinkey Wang, Compliance Certification Services (Kunshan) Inc, winkey.wang@sgs.com , +8613510914121
Test FirmAutumn Zou, Compliance Certification Services (Kunshan) Inc, Autumn.Zou@sgs.com , +86 755 2759 5097
TCB EmailUSCTS.TCB@SGS.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date04/12/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsOutput Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device only has 20 MHz and 40 MHz bandwidth modes.

Applications

Application IDDatePurpose
EH4iueGrds9wTp6Gi4NWLg==2022-10-16Original Equipment
8BaLGSQrhy4I0p0Jt8RYGg==2022-10-16Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.057515CCC
2422-2452 MHz0.020315CCC
5745-5825 MHz0.016215ECC
5755-5795 MHz0.01815ECC

Grants

TCB Grant - Application EH4iueGrds9wTp6Gi4NWLg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 10/16/2022

Application Dated: 10/14/2022
Rolf C. Hagen Inc
20500 Trans Canada Hwy Baie-d'Urfe
Quebec, H9X0A2
Canada
 
Attention: Robert Reid , Aquatic Brands Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANPT-43753
Name of Grantee:  Rolf C. Hagen Inc
Equipment Class: Digital Transmission System
Notes: Catit PIXI Smart Feeder Vision
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0575  
CC 15C 2422.0  -  2452.0 0.0203  

Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device only has 20 MHz and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application EH4iueGrds9wTp6Gi4NWLg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Rolf C. Hagen Inc
20500 Trans Canada Hwy Baie-d'Urfe
Quebec, H9X0A2
Canada
  Date of Grant: 10/16/2022

Application Dated: 10/14/2022
 
Attention: Robert Reid , Aquatic Brands Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANPT-43753
Name of Grantee:  Rolf C. Hagen Inc
Equipment Class: Digital Transmission System
Notes: Catit PIXI Smart Feeder Vision
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0575  
CC 15C 2422.0  -  2452.0 0.0203  

Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device only has 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 8BaLGSQrhy4I0p0Jt8RYGg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 10/16/2022

Application Dated: 10/16/2022
Rolf C. Hagen Inc
20500 Trans Canada Hwy Baie-d'Urfe
Quebec, H9X0A2
Canada
 
Attention: Robert Reid , Aquatic Brands Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANPT-43753
Name of Grantee:  Rolf C. Hagen Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Catit PIXI Smart Feeder Vision
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5745.0  -  5825.0 0.0162  
CC 15E 5755.0  -  5795.0 0.018  

Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device only has 20 MHz and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 8BaLGSQrhy4I0p0Jt8RYGg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Rolf C. Hagen Inc
20500 Trans Canada Hwy Baie-d'Urfe
Quebec, H9X0A2
Canada
  Date of Grant: 10/16/2022

Application Dated: 10/16/2022
 
Attention: Robert Reid , Aquatic Brands Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANPT-43753
Name of Grantee:  Rolf C. Hagen Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Catit PIXI Smart Feeder Vision
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5745.0  -  5825.0 0.0162  
CC 15E 5755.0  -  5795.0 0.018  

Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device only has 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: