M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.

Meizu Technology Co., Ltd. LTE Mobile Phone

Page 1 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 2 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 3 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 4 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 5 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 6 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 7 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 8 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 9 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 10 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 11 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 12 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 13 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 14 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 15 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 16 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 17 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 18 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 19 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 20 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 21 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 22 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 23 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 24 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 25 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 26 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 27 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 28 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 29 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 30 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 31 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 32 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 33 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 34 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 35 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 36 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 37 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 38 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 39 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 40 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 41 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 42 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 43 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 44 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 45 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 46 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 47 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Page 48 of M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.

No. I18N00288-SAR
Page 61 of 196
17 MAIN TEST INSTRUMENTS
Table 17.1: List of Main Instruments
No.
Name
Type
Serial Number
Calibration Date
Valid Period
01
Network analyzer
Agilent E5071C
MY46103759
2017-11-17
One year
02
Dielectric probe
85070E
MY44300317
03
Amplifier
VTL5400
0404
04
Signal Generator
E8257D
MY47461211
2017-06-06
One year
05
Power meter
NRP
102603
06
Power sensor
NRP-Z51
102211
2018-01-04
One year
07
Power meter
NRP
101460
2018-02-05
One year
08
Power sensor
NRP-Z91
100553
09
Signal Generator
E8257D
MY47461211
2017-06-06
One year
10
E-field Probe
SPEAG ES3DV3
3151
2017-12-13
One year
11
DAE
SPEAG DAE4
786
2017-11-22
One year
12
Dipole Validation Kit
SPEAG D835V2
4d057
2015-10-22
Three year
13
Dipole Validation Kit
SPEAG D1800V2
2d147
2015-11-03
Three year
14
Dipole Validation Kit
SPEAG D1900V2
5d088
2015-11-04
Three year
15
Dipole Validation Kit
SPEAG D2450V2
873
2015-10-30
Three year
16
Dipole Validation Kit
SPEAG D2550V2
1010
2015-07-24
Three year
17
BTS
E5515C
GB46110722
2018-02-19
One year
18
Radio Communication
Analyzer
Anristu MT8820C
6201341853
2018-03-08
One year
***END OF REPORT BODY***
No. I18N00288-SAR
Page 62 of 196
ANNEX A Graph Results
GSM850 Head
Date: 2018-3-10
Electronics: DAE4 Sn786
Medium: Head 835 MHz
Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.914 S/m; εr = 40.732; ρ = 1000 kg/m3
Ambient Temperature: 22.6oC
Liquid Temperature: 22.1oC
Communication System: UID 0, GSM (0) Frequency: 836.6 MHz Duty Cycle: 1:8.3
Probe: ES3DV3 – SN3151 ConvF (6.47, 6.47, 6.47);
Left cheek Mid/Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.202 W/kg
Left cheek Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 6.273 V/m; Power Drift = 0.03 dB
Peak SAR (extrapolated) = 0.248 W/kg
SAR(1 g) = 0.194 W/kg; SAR(10 g) = 0.144 W/kg
Maximum value of SAR (measured) = 0.204 W/kg
Fig.1 GSM 850MHz
No. I18N00288-SAR
Page 63 of 196
GSM850 Body
Date: 2018-3-12
Electronics: DAE4 Sn786
Medium: Body 835 MHz
Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.990 S/m; εr = 53.615; ρ = 1000 kg/m3
Ambient Temperature: 22.6oC
Liquid Temperature: 22.1oC
Communication System: UID 0, GPRS 3Txslot (0) Frequency: 836.6 MHz Duty Cycle: 1:2.67
Probe: ES3DV3 – SN3151 ConvF (6.38, 6.38, 6.38);
Rear side Mid/Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.305 W/kg
Rear side Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 17.61 V/m; Power Drift = -0.14 dB
Peak SAR (extrapolated) = 0.371 W/kg
SAR(1 g) = 0.344 W/kg; SAR(10 g) = 0.264 W/kg
Maximum value of SAR (measured) = 0.365 W/kg
Fig.2 GSM 850 MHz
No. I18N00288-SAR
Page 64 of 196
GSM1900 Head
Date: 2018-3-5
Electronics: DAE4 Sn786
Medium: Head 1900 MHz
Medium parameters used: f = 1880 MHz; σ = 1.397 S/m; εr = 39.383; ρ = 1000 kg/m3
Ambient Temperature: 22.2oC
Liquid Temperature: 21.7oC
Communication System: UID 0, GSM (0) Frequency: 1880 MHz Duty Cycle: 1:8.3
Probe: ES3DV3 – SN3151 ConvF (5.09, 5.09, 5.09);
Right Cheek Middle/Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.285 W/kg
Right/Right Cheek Middle/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 2.189 V/m; Power Drift = 0.07 dB
Peak SAR (extrapolated) = 0.519 W/kg
SAR(1 g) = 0.148 W/kg; SAR(10 g) = 0.087 W/kg
Maximum value of SAR (measured) = 0.307 W/kg
Fig.3 GSM 1900 MHz
No. I18N00288-SAR
Page 65 of 196
GSM1900 Body
Date: 2018-3-5
Electronics: DAE4 Sn786
Medium: Body 1900 MHz
Medium parameters used: f = 1880 MHz; σ = 1.539 S/m; εr = 51.795; ρ = 1000 kg/m3
Ambient Temperature: 22.2oC
Liquid Temperature: 21.7oC
Communication System: UID 0, GPRS 3Txslot (0) Frequency: 1880 MHz Duty Cycle: 1:2.67
Probe: ES3DV3 – SN3151 ConvF (4.89, 4.89, 4.89);
Bottom side Mid/Area Scan (51x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.569 W/kg
Bottom side Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 9.569 V/m; Power Drift = 0.17 dB
Peak SAR (extrapolated) = 0.846 W/kg
SAR(1 g) = 0.497 W/kg; SAR(10 g) = 0.260 W/kg
Maximum value of SAR (measured) = 0.567 W/kg
Fig.4 GSM 1900 MHz
No. I18N00288-SAR
Page 66 of 196
CDMA BC0 Head
Date: 2018-3-10
Electronics: DAE4 Sn786
Medium: Head 835 MHz
Medium parameters used (interpolated): f = 836.5 MHz; σ = 0.914 S/m; εr = 40.764; ρ = 1000 kg/m3
Ambient Temperature: 22.4oC
Liquid Temperature: 21.9oC
Communication System: UID 0, CDMA (0) Frequency: 836.5 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (6.47, 6.47, 6.47);
Left cheek Mid/Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.466 W/kg
Left cheek Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 10.32 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 0.578 W/kg
SAR(1 g) = 0.453 W/kg; SAR(10 g) = 0.337 W/kg
Maximum value of SAR (measured) = 0.480 W/kg
Fig.5 CDMA BC0
No. I18N00288-SAR
Page 67 of 196
CDMA BC0 Body
Date: 2018-3-12
Electronics: DAE4 Sn786
Medium: Body 835 MHz
Medium parameters used (interpolated): f = 836.5 MHz; σ = 0.990 S/m; εr = 53.617; ρ = 1000 kg/m3
Ambient Temperature: 22.4oC
Liquid Temperature: 21.9oC
Communication System: UID 0, CDMA (0) Frequency: 836.5 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (6.38, 6.38, 6.38);
Rear side Mid/Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.589 W/kg
Rear side Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 24.64 V/m; Power Drift = -0.05 dB
Peak SAR (extrapolated) = 0.702 W/kg
SAR(1 g) = 0.559 W/kg; SAR(10 g) = 0.428 W/kg
Maximum value of SAR (measured) = 0.584 W/kg
Fig.6 CDMA BC0
No. I18N00288-SAR
Page 68 of 196
WCDMA 850 Head
Date: 2018-3-10
Electronics: DAE4 Sn786
Medium: Head 835 MHz
Medium parameters used (interpolated): f = 836.4 MHz; σ = 0.914 S/m; εr = 40.76; ρ = 1000 kg/m3
Ambient Temperature: 22.5oC
Liquid Temperature: 22.0oC
Communication System: UID 0, WCDMA (0) Frequency: 836.4 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (6.47, 6.47, 6.47);
Left cheek Mid/Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.394 W/kg
Left cheek Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 8.811 V/m; Power Drift = 0.05 dB
Peak SAR (extrapolated) = 0.481 W/kg
SAR(1 g) = 0.376 W/kg; SAR(10 g) = 0.281 W/kg
Maximum value of SAR (measured) = 0.396 W/kg
Fig.7 WCDMA 850
No. I18N00288-SAR
Page 69 of 196
WCDMA 850 Body
Date: 2018-3-12
Electronics: DAE4 Sn786
Medium: Body 835 MHz
Medium parameters used (interpolated): f = 836.4 MHz; σ = 0.990 S/m; εr = 53.614; ρ = 1000 kg/m3
Ambient Temperature: 22.5oC
Liquid Temperature: 22.0oC
Communication System: UID 0, WCDMA (0) Frequency: 836.4 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (6.38, 6.38, 6.38);
Rear side Mid/Area Scan (71x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.553 W/kg
Rear side Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 23.10 V/m; Power Drift = 0.00 dB
Peak SAR (extrapolated) = 0.657 W/kg
SAR(1 g) = 0.523 W/kg; SAR(10 g) = 0.400 W/kg
Maximum value of SAR (measured) = 0.547 W/kg
Fig.8 WCDMA 850
No. I18N00288-SAR
Page 70 of 196
WCDMA 1900 Head
Date: 2018-3-5
Electronics: DAE4 Sn786
Medium: Head 1900 MHz
Medium parameters used: f = 1880 MHz; σ = 1.397 S/m; εr = 39.383; ρ = 1000 kg/m3
Ambient Temperature: 21.8oC
Liquid Temperature: 21.3oC
Communication System: UID 0, WCDMA (0) Frequency: 1880 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (5.09, 5.09, 5.09);
Right Cheek Mid/Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.402 W/kg
Right Cheek Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 2.870 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 0.543 W/kg
SAR(1 g) = 0.305 W/kg; SAR(10 g) = 0.176 W/kg
Maximum value of SAR (measured) = 0.494 W/kg
Fig.9 WCDMA 1900
No. I18N00288-SAR
Page 71 of 196
WCDMA 1900 Body
Date: 2018-3-5
Electronics: DAE4 Sn786
Medium: Body 1900 MHz
Medium parameters used: f = 1880 MHz; σ = 1.539 S/m; εr = 51.795; ρ = 1000 kg/m3
Ambient Temperature: 22.3oC
Liquid Temperature: 21.8oC
Communication System: UID 0, WCDMA (0) Frequency: 1880 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (4.89, 4.89, 4.89);
Bottom side Mid/Area Scan (41x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.562 W/kg
Bottom side Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 11.97 V/m; Power Drift = -0.11 dB
Peak SAR (extrapolated) = 0.893 W/kg
SAR(1 g) = 0.516 W/kg; SAR(10 g) = 0.268 W/kg
Maximum value of SAR (measured) = 0.583 W/kg
Fig.10 WCDMA 1900
No. I18N00288-SAR
Page 72 of 196
WCDMA 1700 Head
Date: 2018-3-2
Electronics: DAE4 Sn786
Medium: Head 1800 MHz
Medium parameters used (interpolated): f = 1732.6 MHz; σ = 1.336 S/m; εr = 39.838; ρ = 1000
kg/m3
Ambient Temperature: 22.7oC
Liquid Temperature: 22.2oC
Communication System: UID 0, WCDMA (0) Frequency: 1732.6 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (5.27, 5.27, 5.27);
Right Cheek Mid/Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.080 W/kg
Right Cheek Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 0.4970 V/m; Power Drift = -0.11 dB
Peak SAR (extrapolated) = 0.162 W/kg
SAR(1 g) = 0.065 W/kg; SAR(10 g) = 0.039 W/kg
Maximum value of SAR (measured) = 0.236 W/kg
Fig.11 WCDMA 1700
No. I18N00288-SAR
Page 73 of 196
WCDMA 1700 Body
Date: 2018-3-2
Electronics: DAE4 Sn786
Medium: Body 1800 MHz
Medium parameters used (interpolated): f = 1712.4 MHz; σ = 1.421 S/m; εr = 51.995; ρ = 1000
kg/m3
Ambient Temperature: 22.6oC
Liquid Temperature: 22.1oC
Communication System: UID 0, WCDMA (0) Frequency: 1712.4 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (5.11, 5.11, 5.11);
Bottom side Low /Area Scan (41x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 1.36 W/kg
Bottom side Low /Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 30.28 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 1.92 W/kg
SAR(1 g) = 1.15 W/kg; SAR(10 g) = 0.624 W/kg
Maximum value of SAR (measured) = 1.28 W/kg
Fig.12 WCDMA 1700
No. I18N00288-SAR
Page 74 of 196
LTE Band 2 Head
Date: 2018-3-5
Electronics: DAE4 Sn786
Medium: Head 1900 MHz
Medium parameters used: f = 1880 MHz; σ = 1.397 S/m; εr = 39.383; ρ = 1000 kg/m3
Ambient Temperature: 21.5oC
Liquid Temperature: 21.0oC
Communication System: UID 0, LTE_FDD (0) Frequency: 1880 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (5.09, 5.09, 5.09);
Right Cheek Mid 1RB_Low/Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500
mm
Maximum value of SAR (interpolated) = 0.193 W/kg
Right Cheek Mid 1RB_Low/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 3.441 V/m; Power Drift = 0.03 dB
Peak SAR (extrapolated) = 0.295 W/kg
SAR(1 g) = 0.208 W/kg; SAR(10 g) = 0.118 W/kg
Maximum value of SAR (measured) = 0.370 W/kg
Fig.13 LTE Band 2
No. I18N00288-SAR
Page 75 of 196
LTE Band 2 Body
Date: 2018-3-5
Electronics: DAE4 Sn786
Medium: Body 1900 MHz
Medium parameters used: f = 1880 MHz; σ = 1.539 S/m; εr = 51.795; ρ = 1000 kg/m3
Ambient Temperature: 21.8oC
Liquid Temperature: 21.3oC
Communication System: UID 0, LTE_FDD (0) Frequency: 1880 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (4.89, 4.89, 4.89);
Rear side Mid 1RB_Low/Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.593 W/kg
Rear side Mid 1RB_Low/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 9.221 V/m; Power Drift = -0.10 dB
Peak SAR (extrapolated) = 0.848 W/kg
SAR(1 g) = 0.506 W/kg; SAR(10 g) = 0.275 W/kg
Maximum value of SAR (measured) = 0.565 W/kg
Fig.14 LTE Band 2
No. I18N00288-SAR
Page 76 of 196
LTE Band 4 Head
Date: 2018-3-2
Electronics: DAE4 Sn786
Medium: Head 1800 MHz
Medium parameters used (interpolated): f = 1732.5 MHz; σ = 1.336 S/m; εr = 39.839; ρ = 1000
kg/m3
Ambient Temperature: 22.2oC
Liquid Temperature: 21.7oC
Communication System: UID 0, LTE_FDD (0) Frequency: 1732.5 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (5.27, 5.27, 5.27);
Right Cheek Mid 1RB_Mid/Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.089 W/kg
Right Cheek Mid 1RB_Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 2.159 V/m; Power Drift = 0.09 dB
Peak SAR (extrapolated) = 0.155 W/kg
SAR(1 g) = 0.068 W/kg; SAR(10 g) = 0.040 W/kg
Maximum value of SAR (measured) = 0.081 W/kg
Fig.15 LTE Band 4
No. I18N00288-SAR
Page 77 of 196
LTE Band 4 Body
Date: 2018-3-2
Electronics: DAE4 Sn786
Medium: Body 1800 MHz
Medium parameters used: f = 1720 MHz; σ = 1.429 S/m; εr = 52.072; ρ = 1000 kg/m3
Ambient Temperature: 21.8oC
Liquid Temperature: 21.3oC
Communication System: UID 0, LTE_FDD (0) Frequency: 1720 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (5.11, 5.11, 5.11);
Rear side Low 1RB_Mid/Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 1.12 W/kg
Rear side Low 1RB_Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 6.401 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 1.68 W/kg
SAR(1 g) = 1.09 W/kg; SAR(10 g) = 0.595 W/kg
Maximum value of SAR (measured) = 1.22 W/kg
Fig.16 LTE Band 4
No. I18N00288-SAR
Page 78 of 196
LTE Band 5 Head
Date: 2018-3-10
Electronics: DAE4 Sn786
Medium: Head 835 MHz
Medium parameters used (interpolated): f = 836.5 MHz; σ = 0.914 S/m; εr = 40.764; ρ = 1000 kg/m3
Ambient Temperature: 22.0oC
Liquid Temperature: 21.5oC
Communication System: UID 0, LTE_FDD (0) Frequency: 836.5 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (6.47, 6.47, 6.47);
Left cheek Mid 25RB_High/Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500
mm
Maximum value of SAR (interpolated) = 0.402 W/kg
Left cheek Mid 25RB_High/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 7.284 V/m; Power Drift = 0.08 dB
Peak SAR (extrapolated) = 0.498 W/kg
SAR(1 g) = 0.373 W/kg; SAR(10 g) = 0.275 W/kg
Maximum value of SAR (measured) = 0.394 W/kg
Fig.17 LTE Band 5
No. I18N00288-SAR
Page 79 of 196
LTE Band 5 Body
Date: 2018-3-12
Electronics: DAE4 Sn786
Medium: Body 835 MHz
Medium parameters used (interpolated): f = 836.5 MHz; σ = 0.990 S/m; εr = 53.617; ρ = 1000 kg/m3
Ambient Temperature: 22.4oC
Liquid Temperature: 21.9oC
Communication System: UID 0, LTE_FDD (0) Frequency: 836.5 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (6.38, 6.38, 6.38);
Rear side Mid 25RB_High /Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 0.477 W/kg
Rear side Mid 25RB_High /Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 21.72 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 0.564 W/kg
SAR(1 g) = 0.451 W/kg; SAR(10 g) = 0.346 W/kg
Maximum value of SAR (measured) = 0.471 W/kg
Fig.18 LTE Band 5
No. I18N00288-SAR
Page 80 of 196
LTE Band 7 Head
Date: 2018-2-26
Electronics: DAE4 Sn786
Medium: Head 2550 MHz
Medium parameters used (interpolated): f = 2535 MHz; σ = 1.958 S/m; εr = 38.436; ρ = 1000 kg/m3
Ambient Temperature: 22.3oC
Liquid Temperature: 21.8oC
Communication System: UID 0, LTE_FDD (0) Frequency: 2535 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (4.53, 4.53, 4.53);
Right Cheek Mid 1RB_Mid /Area Scan (61x101x1): Interpolated grid: dx=1.000 mm, dy=1.000
mm
Maximum value of SAR (interpolated) = 0.165 W/kg
Right Cheek Mid 1RB_Mid /Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 2.018 V/m; Power Drift = 0.03 dB
Peak SAR (extrapolated) = 0.282 W/kg
SAR(1 g) = 0.144 W/kg; SAR(10 g) = 0.071 W/kg
Maximum value of SAR (measured) = 0.159 W/kg
Fig.19 LTE Band 7
No. I18N00288-SAR
Page 81 of 196
LTE Band 7 Body
Date: 2018-2-26
Electronics: DAE4 Sn786
Medium: Body 2550 MHz
Medium parameters used (interpolated): f = 2535 MHz; σ = 2.084 S/m; εr = 51.978; ρ = 1000 kg/m3
Ambient Temperature: 22.7oC
Liquid Temperature: 22.2oC
Communication System: UID 0, 4G_LTE_FDD (0) Frequency: 2535 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (4.24, 4.24, 4.24);
Rear Side Mid 1RB_ Mid/Area Scan (71x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 0.651 W/kg
Rear Side Mid 1RB_ Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 4.418 V/m; Power Drift = -0.03 dB
Peak SAR (extrapolated) = 1.24 W/kg
SAR(1 g) = 0.615 W/kg; SAR(10 g) = 0.276 W/kg
Maximum value of SAR (measured) = 0.697 W/kg
Fig.20 LTE Band 7
No. I18N00288-SAR
Page 82 of 196
Wi-Fi 2.4G Head
Date: 2018-3-14
Electronics: DAE4 Sn786
Medium: Head 2450 MHz
Medium parameters used (interpolated): f = 2437 MHz; σ = 1.832 S/m; εr = 38.109; ρ = 1000 kg/m3
Ambient Temperature: 22.2oC
Liquid Temperature: 21.7oC
Communication System: UID 0, WiFi (0) Frequency: 2437 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (4.57, 4.57, 4.57);
Left Cheek Mid/Area Scan (61x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 0.434 W/kg
Left Cheek Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 6.775 V/m; Power Drift = -0.07 dB
Peak SAR (extrapolated) = 0.818 W/kg
SAR(1 g) = 0.400 W/kg; SAR(10 g) = 0.195 W/kg
Maximum value of SAR (measured) = 0.406 W/kg
Fig.21 Wi-Fi 2.4G
No. I18N00288-SAR
Page 83 of 196
Wi-Fi 2.4G Body
Date: 2018-3-14
Electronics: DAE4 Sn786
Medium: Body 2450 MHz
Medium parameters used (interpolated): f = 2437 MHz; σ = 1.961 S/m; εr = 52.234; ρ = 1000 kg/m3
Ambient Temperature: 22.3oC
Liquid Temperature: 21.8oC
Communication System: UID 0, WiFi (0) Frequency: 2437 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (4.46, 4.46, 4.46);
Rear Side Mid/Area Scan (71x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 0.124 W/kg
Rear Side Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 2.903 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 0.255 W/kg
SAR(1 g) = 0.124 W/kg; SAR(10 g) = 0.060 W/kg
Maximum value of SAR (measured) = 0.128 W/kg
Fig.22 Wi-Fi 2.4G
No. I18N00288-SAR
Page 84 of 196
ANNEX B SystemVerification Results
835MHz
Date: 2018-3-10
Electronics: DAE4 Sn786
Medium: Head 835 MHz
Medium parameters used: f = 835 MHz; σ = 0.912 S/m; εr = 40.752; ρ = 1000 kg/m3
Ambient Temperature: 22.9oC
Liquid Temperature: 22.5oC
Communication System: CW Frequency: 835 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (6.47, 6.47, 6.47);
System Validation /Area Scan (81x161x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Reference Value = 54.784 V/m; Power Drift = 0.05 dB
Fast SAR: SAR(1 g) = 2.35 W/kg; SAR(10 g) = 1.50 W/kg
Maximum value of SAR (interpolated) = 2.52 W/kg
System Validation /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 54.784 V/m; Power Drift = 0.05 dB
Peak SAR (extrapolated) = 3.38 W/kg
SAR(1 g) = 2.37 W/kg; SAR(10 g) = 1.53 W/kg
Maximum value of SAR (measured) = 2.58 W/kg
0 dB = 2.58 W/kg = 4.12 dBW/kg
Fig.B.1. Validation 835MHz 250mW
No. I18N00288-SAR
Page 85 of 196
835MHz
Date: 2018-3-12
Electronics: DAE4 Sn786
Medium: Body 835 MHz
Medium parameters used: f = 835 MHz; σ = 0.988 S/m; εr = 53.639; ρ = 1000 kg/m3
Ambient Temperature: 22.9oC
Liquid Temperature: 22.5oC
Communication System: CW Frequency: 835 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (6.38, 6.38, 6.38);
System Validation /Area Scan (81x171x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Reference Value = 56.427 V/m; Power Drift = 0.08 dB
Fast SAR: SAR(1 g) = 2.41 W/kg; SAR(10 g) = 1.55 W/kg
Maximum value of SAR (interpolated) = 2.59 W/kg
System Validation /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 56.427 V/m; Power Drift = 0.08 dB
Peak SAR (extrapolated) = 3.68 W/kg
SAR(1 g) = 2.45 W/kg; SAR(10 g) = 1.58 W/kg
Maximum value of SAR (measured) = 2.66 W/kg
0 dB = 2.66 W/kg = 4.25 dBW/kg
Fig.B.2. Validation 835MHz 250mW
No. I18N00288-SAR
Page 86 of 196
1800MHz
Date: 2018-3-2
Electronics: DAE4 Sn786
Medium: Head 1800 MHz
Medium parameters used: f = 1800 MHz; σ = 1.409 S/m; εr = 39.653; ρ = 1000 kg/m3
Ambient Temperature: 22.0oC
Liquid Temperature: 21.5oC
Communication System: CW Frequency: 1800 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (5.27, 5.27, 5.27);
System Validation/Area Scan (61x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Reference Value = 80.268 V/m; Power Drift = 0.03 dB
Fast SAR: SAR(1 g) = 9.84 W/kg; SAR(10 g) = 5.18 W/kg
Maximum value of SAR (interpolated) = 11.6 W/kg
System Validation/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 80.268 V/m; Power Drift = 0.03 dB
Peak SAR (extrapolated) = 19.5 W/kg
SAR(1 g) = 9.89 W/kg; SAR(10 g) = 5.22 W/kg
Maximum value of SAR (measured) = 12.7 W/kg
0 dB = 12.7 W/kg = 11.04 dBW/kg
Fig.B.3. Validation 1800MHz 250mW
No. I18N00288-SAR
Page 87 of 196
1800MHz
Date: 2018-3-2
Electronics: DAE4 Sn786
Medium: Body 1800 MHz
Medium parameters used: f = 1800 MHz; σ = 1.503 S/m; εr = 51.82; ρ = 1000 kg/m3
Ambient Temperature: 22.0oC
Liquid Temperature: 21.5oC
Communication System: CW Frequency: 1800 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (5.11, 5.11, 5.11);
System Validation/Area Scan (61x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Reference Value = 78.182 V/m; Power Drift = -0.09 dB
Fast SAR: SAR(1 g) = 9.80 W/kg; SAR(10 g) = 5.24 W/kg
Maximum value of SAR (interpolated) = 12.0 W/kg
System Validation/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 78.182 V/m; Power Drift = -0.09 dB
Peak SAR (extrapolated) = 18.4 W/kg
SAR(1 g) = 9.67 W/kg; SAR(10 g) = 5.19 W/kg
Maximum value of SAR (measured) = 11.7 W/kg
0 dB = 11.7 W/kg = 10.68 dBW/kg
Fig.B.4. Validation 1800MHz 250mW
No. I18N00288-SAR
Page 88 of 196
1900MHz
Date: 2018-3-5
Electronics: DAE4 Sn786
Medium: Head 1900 MHz
Medium parameters used: f = 1900 MHz; σ = 1.416 S/m; εr = 39.288; ρ = 1000 kg/m3
Ambient Temperature: 22.9oC
Liquid Temperature: 22.5oC
Communication System: CW Frequency: 1900 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (5.09, 5.09, 5.09);
System Validation /Area Scan (81x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Reference Value = 92.854 V/m; Power Drift = -0.06 dB
Fast SAR: SAR(1 g) = 10.6 W/kg; SAR(10 g) = 5.36 W/kg
Maximum value of SAR (interpolated) = 13.1 W/kg
System Validation /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 92.854 V/m; Power Drift = -0.06 dB
Peak SAR (extrapolated) = 19.4 W/kg
SAR(1 g) = 10.4 W/kg; SAR(10 g) = 5.31 W/kg
Maximum value of SAR (measured) = 12.9 W/kg
0 dB = 12.9 W/kg = 11.11 dBW/kg
Fig.B.5. Validation 1900MHz 250mW
No. I18N00288-SAR
Page 89 of 196
1900MHz
Date: 2018-3-5
Electronics: DAE4 Sn786
Medium: Body 1900 MHz
Medium parameters used: f = 1900 MHz; σ = 1.554 S/m; εr = 51.747; ρ = 1000 kg/m3
Ambient Temperature: 22.9oC
Liquid Temperature: 22.5oC
Communication System: CW Frequency: 1900 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (4.89, 4.89, 4.89);
System validation /Area Scan (81x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Reference Value = 75.847 V/m; Power Drift = 0.10 dB
Fast SAR: SAR(1 g) = 10.5 W/kg; SAR(10 g) = 5.41 W/kg
Maximum value of SAR (interpolated) = 12.6 W/kg
System validation /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 75.847 V/m; Power Drift = 0.10 dB
Peak SAR (extrapolated) = 20.2 W/kg
SAR(1 g) = 10.6 W/kg; SAR(10 g) = 5.46 W/kg
Maximum value of SAR (measured) = 13.2 W/kg
0 dB = 13.2 W/kg = 11.21 dBW/kg
Fig.B.6. Validation 1900MHz 250mW
No. I18N00288-SAR
Page 90 of 196
2450MHz
Date: 2018-3-14
Electronics: DAE4 Sn786
Medium: Head 2450 MHz
Medium parameters used: f = 2450 MHz; σ = 1.847 S/m; εr = 38.063; ρ = 1000 kg/m3
Ambient Temperature: 22.0oC
Liquid Temperature: 21.6oC
Communication System: CW Frequency: 2450 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (4.57, 4.57, 4.57);
System Validation /Area Scan (61x81x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Reference Value = 86.622 V/m; Power Drift = -0.08 dB
Fast SAR: SAR(1 g) = 13.2 W/kg; SAR(10 g) = 6.06 W/kg
Maximum value of SAR (interpolated) = 15.5 W/kg
System Validation /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 86.622 V/m; Power Drift = -0.08 dB
Peak SAR (extrapolated) = 22.6 W/kg
SAR(1 g) = 12.9 W/kg; SAR(10 g) = 5.98 W/kg
Maximum value of SAR (measured) = 15.0 W/kg
0 dB = 15.0 W/kg = 11.76 dBW/kg
Fig.B.7. Validation 2450MHz 250mW
No. I18N00288-SAR
Page 91 of 196
2450MHz
Date: 2018-3-14
Electronics: DAE4 Sn786
Medium: Body 2450 MHz
Medium parameters used: f = 2450 MHz; σ = 1.976 S/m; εr = 52.19; ρ = 1000 kg/m3
Ambient Temperature: 22.0oC
Liquid Temperature: 21.6oC
Communication System: CW Frequency: 2450 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (4.46, 4.46, 4.46);
System Validation/Area Scan (81x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Reference Value = 88.591 V/m; Power Drift = 0.11 dB
Fast SAR: SAR(1 g) = 13.3 W/kg; SAR(10 g) = 6.12 W/kg
Maximum value of SAR (interpolated) = 15.7 W/kg
System Validation/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 88.591 V/m; Power Drift = 0.11 dB
Peak SAR (extrapolated) = 24.9 W/kg
SAR(1 g) = 13.5 W/kg; SAR(10 g) = 6.18 W/kg
Maximum value of SAR (measured) = 16.4 W/kg
0 dB = 16.4 W/kg = 12.15 dBW/kg
Fig.B.8. Validation 2450MHz 250mW
No. I18N00288-SAR
Page 92 of 196
2550MHz
Date: 2018-2-26
Electronics: DAE4 Sn786
Medium: Head 2550 MHz
Medium parameters used: f = 2550 MHz; σ = 1.977 S/m; εr = 38.374; ρ = 1000 kg/m3
Ambient Temperature: 22.0oC
Liquid Temperature: 21.6oC
Communication System: CW Frequency: 2550 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (4.53, 4.53, 4.53);
System Validation/Area Scan (81x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Reference Value = 92.738 V/m; Power Drift = 0.02 dB
Fast SAR: SAR(1 g) = 14.5 W/kg; SAR(10 g) = 6.61 W/kg
Maximum value of SAR (interpolated) = 15.8 W/kg
System Validation/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 92.738 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 28.8 W/kg
SAR(1 g) = 14.8 W/kg; SAR(10 g) = 6.68 W/kg
Maximum value of SAR (measured) = 16.9 W/kg
0 dB = 16.9 W/kg = 12.28 dBW/kg
Fig.B.9. Validation 2550MHz 250mW
No. I18N00288-SAR
Page 93 of 196
2550MHz
Date: 2018-2-26
Electronics: DAE4 Sn786
Medium: Body 2550 MHz
Medium parameters used: f = 2550 MHz; σ = 2.105 S/m; εr = 51.934; ρ = 1000 kg/m3
Ambient Temperature: 22.0oC
Liquid Temperature: 21.6oC
Communication System: CW Frequency: 2550 MHz Duty Cycle: 1:1
Probe: ES3DV3 – SN3151 ConvF (4.24, 4.24, 4.24);
System Validation/Area Scan (81x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Reference Value = 87.965 V/m; Power Drift = -0.01 dB
Fast SAR: SAR(1 g) = 13.5 W/kg; SAR(10 g) = 6.23 W/kg
Maximum value of SAR (interpolated) = 15.2 W/kg
System Validation/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 87.965 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 26.2 W/kg
SAR(1 g) = 13.3 W/kg; SAR(10 g) = 6.16 W/kg
Maximum value of SAR (measured) = 14.7 W/kg
0 dB = 14.7 W/kg = 11.67 dBW/kg
Fig.B.10.
Validation 2550MHz 250mW
No. I18N00288-SAR
Page 94 of 196
ANNEX C SAR Measurement Setup
C.1 Measurement Set-up
DASY5 system for performing compliance tests is illustrated above graphically. This system
consists of the following items:
Picture C.1 SAR Lab Test Measurement Set-up










A standard high precision 6-axis robot (Stäubli TX=RX family) with controller, teach pendant
and software. An arm extension for accommodating the data acquisition electronics (DAE).
An isotropic field probe optimized and calibrated for the targeted measurement.
A data acquisition electronics (DAE) which performs the signal amplification, signal multiplexing,
AD-conversion, offset measurements, mechanical surface detection, collision detection, etc.
The unit is battery powered with standard or rechargeable batteries. The signal is optically
transmitted to the EOC.
The Electro-optical converter (EOC) performs the conversion from optical to electrical signals
for the digital communication to the DAE. To use optical surface detection, a special version of
the EOC is required. The EOC signal is transmitted to the measurement server.
The function of the measurement server is to perform the time critical tasks such as signal
filtering, control of the robot operation and fast movement interrupts.
The Light Beam used is for probe alignment. This improves the (absolute) accuracy of the
probe positioning.
A computer running WinXP and the DASY5 software.
Remote control and teach pendant as well as additional circuitry for robot safety such as
warning lamps, etc.
The phantom, the device holder and other accessories according to the targeted measurement.
No. I18N00288-SAR
Page 95 of 196
C.2 DASY5 E-field Probe System
The SAR measurements were conducted with the dosimetric probe designed in the classical
triangular configuration and optimized for dosimetric evaluation. The probe is constructed using the
thick film technique; with printed resistive lines on ceramic substrates. The probe is equipped with
an optical multifiber line ending at the front of the probe tip. It is connected to the EOC box on the
robot arm and provides an automatic detection of the phantom surface. Half of the fibers are
connected to a pulsed infrared transmitter, the other half to a synchronized receiver. As the probe
approaches the surface, the reflection from the surface produces a coupling from the transmitting to
the receiving fibers. This reflection increases first during the approach, reaches maximum and then
decreases. If the probe is flatly touching the surface, the coupling is zero. The distance of the
coupling maximum to the surface is independent of the surface reflectivity and largely independent
of the surface to probe angle. The DASY5 software reads the reflection durning a software
approach and looks for the maximum using 2ndord curve fitting. The approach is stopped at
reaching the maximum.
Probe Specifications:
Model:
Frequency
Range:
Calibration:
ES3DV3, EX3DV4
10MHz — 6.0GHz(EX3DV4)
10MHz — 4GHz(ES3DV3)
In head and body simulating tissue at
Frequencies from 835 up to 5800MHz
Linearity:
± 0.2 dB(30 MHz to 6 GHz) for EX3DV4
± 0.2 dB(30 MHz to 4 GHz) for ES3DV3
Dynamic Range: 10 mW/kg — 100W/kg
Probe Length:
330 mm
Probe Tip
Length:
20 mm
Body Diameter: 12 mm
Tip Diameter:
2.5 mm (3.9 mm for ES3DV3)
Tip-Center:
1 mm (2.0mm for ES3DV3)
Application:
SAR Dosimetry Testing
Compliance tests of mobile phones
Dosimetry in strong gradient fields
Picture C.2 Near-field Probe
Picture C.3 E-field Probe
C.3 E-field Probe Calibration
Each E-Probe/Probe Amplifier combination has unique calibration parameters. A TEM cell
calibration procedure is conducted to determine the proper amplifier settings to enter in the probe
parameters. The amplifier settings are determined for a given frequency by subjecting the probe to
a known E-field density (1 mW/cm2) using an RF Signal generator, TEM cell, and RF Power Meter.
The free space E-field from amplified probe outputs is determined in a test chamber. This
calibration can be performed in a TEM cell if the frequency is below 1 GHz and inn a waveguide or
other methodologies above 1 GHz for free space. For the free space calibration, the probe is placed
No. I18N00288-SAR
Page 96 of 196
in the volumetric center of the cavity and at the proper orientation with the field. The probe is then
rotated 360 degrees until the three channels show the maximum reading. The power density
readings equates to 1 mW/ cm2..
E-field temperature correlation calibration is performed in a flat phantom filled with the appropriate
simulated brain tissue. The E-field in the medium correlates with the temperature rise in the
dielectric medium. For temperature correlation calibration a RF transparent thermistor-based
temperature probe is used in conjunction with the E-field probe.
SAR  C
T
t
Where:
∆t = Exposure time (30 seconds),
C = Heat capacity of tissue (brain or muscle),
∆T = Temperature increase due to RF exposure.
E 
SAR 

Where:
σ = Simulated tissue conductivity,
ρ = Tissue density (kg/m3).
C.4 Other Test Equipment
C.4.1 Data Acquisition Electronics (DAE)
The data acquisition electronics consist of a highly sensitive electrometer-grade preamplifier with
auto-zeroing, a channel and gain-switching multiplexer, a fast 16 bit AD-converter and a command
decoder with a control logic unit. Transmission to the measurement server is accomplished through
an optical downlink for data and status information, as well as an optical uplink for commands and
the clock.
The mechanical probe mounting device includes two different sensor systems for frontal and
sideways probe contacts. They are used for mechanical surface detection and probe collision
detection.
The input impedance of the DAE is 200 MOhm; the inputs are symmetrical and floating. Common
mode rejection is above 80 dB.
PictureC.4: DAE
No. I18N00288-SAR
Page 97 of 196
C.4.2 Robot
The SPEAG DASY system uses the high precision robots (DASY5: RX160L) type from Stäubli SA
(France). For the 6-axis controller system, the robot controller version from Stäubli is used. The
Stäubli robot series have many features that are important for our application:
 High precision (repeatability 0.02mm)
 High reliability (industrial design)
 Low maintenance costs (virtually maintenance free due to direct drive gears; no belt drives)
 Jerk-free straight movements (brushless synchron motors; no stepper motors)
 Low ELF interference (motor control fields shielded via the closed metallic construction shields)
Picture C.5 DASY 5
C.4.3 Measurement Server
The Measurement server is based on a PC/104 CPU broad with CPU (DASY5: 400 MHz, Intel
Celeron), chipdisk (DASY5:128MB), RAM (DASY5:128MB). The necessary circuits for
communication with the DAE electronic box, as well as the 16 bit AD converter system for optical
detection and digital I/O interface are contained on the DASY I/O broad, which is directly connected
to the PC/104 bus of the CPU broad.
The measurement server performs all real-time data evaluation of field measurements and surface
detection, controls robot movements and handles safety operation. The PC operating system
cannot interfere with these time critical processes. All connections are supervised by a watchdog,
and disconnection of any of the cables to the measurement server will automatically disarm the
robot and disable all program-controlled robot movements. Furthermore, the measurement server is
equipped with an expansion port which is reserved for future applications. Please note that this
expansion port does not have a standardized pinout, and therefore only devices provided by
SPEAG can be connected. Devices from any other supplier could seriously damage the
measurement server.
Picture C.6 Server for DASY 5
No. I18N00288-SAR
Page 98 of 196
C.4.4 Device Holder for Phantom
The SAR in the phantom is approximately inversely proportional to the square of the distance
between the source and the liquid surface. For a source at 5mm distance, a positioning uncertainty
of ±0.5mm would produce a SAR uncertainty of ±20%. Accurate device positioning is therefore
crucial for accurate and repeatable measurements. The positions in which the devices must be
measured are defined by the standards.
The DASY device holder is designed to cope with the different positions given in the standard. It has
two scales for device rotation (with respect to the body axis) and device inclination (with respect to
the line between the ear reference points). The rotation centers for both scales is the ear reference
point (ERP). Thus the device needs no repositioning when changing the angles.
The DASY device holder is constructed of low-loss
POM material having the following dielectric
parameters: relative permittivity  =3 and loss tangent
 =0.02. The amount of dielectric material
has been reduced in the closest vicinity of the device, since measurements have suggested that the
influence of the clamp on the test results could thus be lowered.

The extension is lightweight and made of POM, acrylic glass and foam. It fits easily on the upper
part of the Mounting Device in place of the phone positioner. The extension is fully compatible with
the Twin-SAM and ELI phantoms.
Picture C.7-1: Device Holder
Picture C.7-2: Laptop Extension Kit
C.4.5 Phantom
The SAM Twin Phantom V4.0 is constructed of a fiberglass shell integrated in a table. The shape of
the shell is based on data from an anatomical study designed to
Represent the 90th percentile of the population. The phantom enables the dissymmetric evaluation
of SAR for both left and right handed handset usage, as well as body-worn usage using the flat
phantom region. Reference markings on the Phantom allow the complete setup of all predefined
phantom positions and measurement grids by manually teaching three points in the robot. The shell
phantom has a 2mm shell thickness (except the ear region where shell thickness increases to 6
mm).
No. I18N00288-SAR
Page 99 of 196
Shell Thickness:
Filling Volume:
Dimensions:
Available:
2 ± 0. 2 mm
Approx. 25 liters
810 x l000 x 500 mm (H x L x W)
Special
Picture C.8: SAM Twin Phantom
No. I18N00288-SAR
Page 100 of 196
ANNEX D Position of the wireless device in relation to the phantom
D.1 General considerations
This standard specifies two handset test positions against the head phantom – the “cheek” position
and the “tilt” position.
wt
Width of the handset at the level of the acoustic
wb
Width of the bottom of the handset
Midpoint of the width wt of the handset at the level of the acoustic output
Midpoint of the width wb of the bottom of the handset
Picture D.1-a Typical ―fixed‖ case handset
Picture D.1-b Typical ―clam-shell‖ case handset
Picture D.2 Cheek position of the wireless device on the left side of SAM
No. I18N00288-SAR
Page 101 of 196
Picture D.3 Tilt position of the wireless device on the left side of SAM
D.2 Body-worn device
A typical example of a body-worn device is a mobile phone, wireless enabled PDA or other battery
operated wireless device with the ability to transmit while mounted on a person’s body using a carry
accessory approved by the wireless device manufacturer.
Picture D.4 Test positions for body-worn devices
D.3 Desktop device
A typical example of a desktop device is a wireless enabled desktop computer placed on a table or
desk when used.
The DUT shall be positioned at the distance and in the orientation to the phantom that corresponds
to the intended use as specified by the manufacturer in the user instructions. For devices that
employ an external antenna with variable positions, tests shall be performed for all antenna
positions specified. Picture 8.5 show positions for desktop device SAR tests. If the intended use is
not specified, the device shall be tested directly against the flat phantom.
No. I18N00288-SAR
Page 102 of 196
Picture D.5 Test positions for desktop devices
D.4 DUT Setup Photos
Picture D.6
No. I18N00288-SAR
Page 103 of 196
ANNEX E Equivalent Media Recipes
The liquid used for the frequency range of 700-6000 MHz consisted of water, sugar, salt, preventol,
glycol monobutyl and Cellulose. The liquid has been previously proven to be suited for worst-case.
The Table E.1 shows the detail solution. It’s satisfying the latest tissue dielectric parameters
requirements proposed by the IEEE 1528 and IEC 62209.
Table E.1: Composition of the Tissue Equivalent Matter
Frequency
(MHz)
835
Head
835
Body
1900
Head
1900
Body
2450
Head
2450
Body
5800
Head
5800
Body
Ingredients (% by weight)
Water
41.45
52.5
55.242
69.91
58.79
72.60
65.53
65.53
Sugar
56.0
45.0
Salt
1.45
1.4
0.306
0.13
0.06
0.18
Preventol
0.1
0.1
Cellulose
1.0
1.0
Glycol
Monobutyl
44.452
29.96
41.15
27.22
Diethylenglycol
monohexylether
17.24
17.24
Triton X-100
17.24
17.24
ε=41.5
σ=0.90
ε=55.2
σ=0.97
ε=40.0
σ=1.40
ε=53.3
σ=1.52
ε=39.2
σ=1.80
ε=52.7
σ=1.95
ε=35.3
σ=5.27
ε=48.2
σ=6.00
Dielectric
Parameters
Target Value
Note: There is a little adjustment respectively for 750, 1800, 2600, 5200, 5300, and 5600,
based on the recipe of closest frequency in table E.1
No. I18N00288-SAR
Page 104 of 196
ANNEX F System Validation
The SAR system must be validated against its performance specifications before it is deployed.
When SAR probes, system components or software are changed, upgraded or recalibrated, these
must be validated with the SAR system(s) that operates with such components.
Table F.1: System Validation
Probe SN.
Liquid name
Validation date
Frequency point
Status (OK or Not)
3151
Head 750MHz
2017-12-17
750 MHz
OK
3151
Head 835MHz
2017-12-17
835 MHz
OK
3151
Head 1800MHz
2017-12-19
1800 MHz
OK
3151
Head 1900MHz
2017-12-19
1900 MHz
OK
3151
Head 2450MHz
2017-12-20
2450 MHz
OK
3151
Head 2550MHz
2017-12-20
2550 MHz
OK
3151
Body 750MHz
2017-12-17
750 MHz
OK
3151
Body 835MHz
2017-12-17
835 MHz
OK
3151
Body 1800MHz
2017-12-19
1800 MHz
OK
3151
Body 1900MHz
2017-12-19
1900 MHz
OK
3151
Body 2450MHz
2017-12-20
2450 MHz
OK
3151
Body 2550MHz
2017-12-20
5200 MHz
OK
No. I18N00288-SAR
Page 105 of 196
ANNEX G DAE Calibration Certificate
DAE4 SN: 786 Calibration Certificate
No. I18N00288-SAR
Page 106 of 196
No. I18N00288-SAR
Page 107 of 196
No. I18N00288-SAR
Page 108 of 196
ANNEX H Probe Calibration Certificate
Probe ES3DV3-SN: 3151 Calibration Certificate
Download: M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Mirror Download [FCC.gov]M809L LTE Mobile Phone RF Exposure Info EMF2001001 Meizu Technology Co., Ltd.
Document ID3844484
Application IDWumzqzNsx6amkpQU2UprwQ==
Document DescriptionRF Exposure Report part 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize341.75kB (4271888 bits)
Date Submitted2018-05-09 00:00:00
Date Available2018-05-09 00:00:00
Creation Date2018-05-03 11:29:34
Producing SoftwareMicrosoft® Word 2010
Document Lastmod2018-05-03 11:30:46
Document TitleEMF2001001
Document CreatorMicrosoft® Word 2010
Document Author: Qdy

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Qdy
Create Date                     : 2018:05:03 11:29:34+08:00
Modify Date                     : 2018:05:03 11:30:46+08:00
Subject                         : SAR测试报告模版
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2018:05:03 11:30:46+08:00
Creator Tool                    : Microsoft® Word 2010
Format                          : application/pdf
Title                           : EMF2001001
Description                     : SAR测试报告模版
Creator                         : Qdy
Document ID                     : uuid:9ee82070-b4d4-47ea-8639-3eaf66416528
Instance ID                     : uuid:13b8ea23-a211-4879-8818-7a04cad72050
Producer                        : Microsoft® Word 2010
Page Count                      : 48