FCC ID 2ANQY-HXGW900
HXGW900
by Digi International Inc.
Grantee Code: 2ANQY Product Code: HXGW900
Latest application date: 2024-09-05
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.5-927.5 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-05 |
| 902.5-927.5 MHz | Original Equipment | 2020-01-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user manual | Users Manual | 2020-01-08 | PDF 1.3 MB |
| Internal Photos | Internal Photos | 2024-09-05 | PDF 2.1 MB |
| internal photos | Internal Photos | 2020-01-08 | PDF 1.5 MB |
| External Photos | External Photos | 2024-09-05 | PDF 1,016.5 KB |
| external photos | External Photos | 2020-01-08 | PDF 436.1 KB |
| label | ID Label/Location Info | 2020-01-08 | PDF 444 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2024-09-05 | PDF 1 MB |
| test setup photos | Test Setup Photos | 2020-01-08 | PDF 769.2 KB |
| Antenna specification | Test Report | 2024-09-05 | PDF 1.3 MB |
| Rev A Digi HX15 LoRaWAN Gateway | Test Report | 2024-09-05 | PDF 791.8 KB |
| test report | Test Report | 2020-01-08 | PDF 2.8 MB |
| 2.911 (d)(5)(i)CertificiationApplicantv1.2 | Attestation Statements | 2024-09-05 | PDF 188.6 KB |
| 2.911 (d)(5)(ii)CertificiationApplicantv1.3 | Attestation Statements | 2024-09-05 | PDF 169.8 KB |
| 2FCC_U_S_AgenT_Designation_Attestation | Attestation Statements | 2024-09-05 | PDF 168.8 KB |
| Agent Authorization Rev1.0 | Cover Letter(s) | 2024-09-05 | PDF 321.6 KB |
| FCC Class II PC request letter Rev1.1 | Cover Letter(s) | 2024-09-05 | PDF 150 KB |
| Letter of Authorization Rev 1.0 | Cover Letter(s) | 2024-09-05 | PDF 153.4 KB |
| POA | Cover Letter(s) | 2020-01-08 | PDF 240.5 KB |
| confidentiality request letter | Cover Letter(s) | 2020-01-08 | PDF 244 KB |
| modular approval letter | Cover Letter(s) | 2020-01-08 | PDF 177.6 KB |
| MPE | RF Exposure Info | 2024-09-05 | PDF 281 KB |
| RF exposure | RF Exposure Info | 2020-01-08 | PDF 196.6 KB |
| block diagram Metadata only | Block Diagram | PDF 848.7 KB | |
| schematic diagram Metadata only | Schematics | PDF 412.7 KB | |
| operation description Metadata only | Operational Description | PDF 28.6 KB |
Application Information
| Application ID | PXTFLblVXTYUoEmfWlTD4A== |
|---|---|
| Final Action Date | 2024-09-05 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010283307 |
| Model | HXGW900 |
| Frequency Range | 902.5-927.5 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | HXGW900 |
| Responsible Party | Steve Ericson, Mr, Steve.Ericson@digi.com  , (952) 912-3444 |
| Technical Contact | Digi International Inc., Steve.Ericson@digi.com |
| Test Firm | Gordon Hurst, MiCOM Labs, gordon_hurst@micomlabs.com  , 925-462-0304 |
| TCB Email | certification@micomlabs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change for adding an certified LTE Cat 1 radio module with FCC ID: XMR201606EC21A. Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| PXTFLblVXTYUoEmfWlTD4A== | 2024-09-05 | Class II permissive change or modification of presently authorized equipment |
| B24UWGCi5i7y+Hpr9SjWMw== | 2020-01-08 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.5-927.5 MHz | 0.4102000 | 15C |
Grants
TCB Grant - Application PXTFLblVXTYUoEmfWlTD4A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 09/05/2024 Application Dated: 09/05/2024 |
| Digi International Inc. |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Steve Ericson , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANQY-HXGW900 |
| Name of Grantee: | Digi International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | HXGW900 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.5 | 0.4102 |
| Class II permissive change for adding an certified LTE Cat 1 radio module with FCC ID: XMR201606EC21A. Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application PXTFLblVXTYUoEmfWlTD4A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc. 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 09/05/2024 Application Dated: 09/05/2024 |
| Attention: Steve Ericson , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANQY-HXGW900 |
| Name of Grantee: | Digi International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | HXGW900 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.5 | 0.4102 |
| Class II permissive change for adding an certified LTE Cat 1 radio module with FCC ID: XMR201606EC21A. Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 01/08/2020 Application Dated: 01/08/2020 |
| Digi International Inc. |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Steve Ericson , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANQY-HXGW900 |
| Name of Grantee: | Digi International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | HXGW900 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.5 | 0.4102 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application B24UWGCi5i7y+Hpr9SjWMw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc. 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 01/08/2020 Application Dated: 01/08/2020 |
| Attention: Steve Ericson , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANQY-HXGW900 |
| Name of Grantee: | Digi International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | HXGW900 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.5 | 0.4102 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: |