FCC ID 2ANSE-CPVIK
Control panel
by Danfoss Drives
Grantee Code: 2ANSE Product Code: CPVIK
Latest application date: 2022-05-25
FCC ID Device Details
| FCC ID | 2ANSE-CPVIK |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ANSE |
| Product Code | CPVIK |
| Applicant Business | Danfoss Drives 🇩🇰 |
| Related Domains |  danfoss.com  bureauveritas.com |
| Equipment Class | Control panel |
| Test Firm | 7layers GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-05-25 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-05-25 |
| 2402-2480 MHz | Original Equipment | 2022-01-14 |
| 2402-2480 MHz | Original Equipment | 2022-01-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2022-10-25 | PDF 629.3 KB |
| Users Manual | Users Manual | 2022-06-27 | PDF 323.2 KB |
| Internal Photos | Internal Photos | 2022-10-25 | PDF 157.7 KB |
| Internal Photos | Internal Photos | 2022-06-27 | PDF 326.2 KB |
| External Photos | External Photos | 2022-10-25 | PDF 123.5 KB |
| External Photos | External Photos | 2022-06-27 | PDF 374.2 KB |
| ID Label | ID Label/Location Info | 2022-05-25 | PDF 123.6 KB |
| Label Location Info | ID Label/Location Info | 2022-05-25 | PDF 94.6 KB |
| ID Label/Location Info | ID Label/Location Info | 2022-01-14 | PDF 123.6 KB |
| ID Label/Location Info | ID Label/Location Info | 2022-01-06 | PDF 213.4 KB |
| Test Setup Photos | Test Setup Photos | 2022-10-25 | PDF 1.6 MB |
| Test Report | Test Report | 2022-05-25 | PDF 2.4 MB |
| Test Report | Test Report | 2022-05-25 | PDF 2.8 MB |
| Test Report_DSS-1 | Test Report | 2022-01-14 | PDF 2.4 MB |
| Test Report_DSS-2 | Test Report | 2022-01-14 | PDF 2.8 MB |
| Test Report-1 | Test Report | 2022-01-06 | PDF 2.5 MB |
| Test Report-2 | Test Report | 2022-01-06 | PDF 2.8 MB |
| Declaration of Identity | Cover Letter(s) | 2022-05-25 | PDF 30.5 KB |
| FCC Class II permissive change letter | Cover Letter(s) | 2022-05-25 | PDF 15.2 KB |
| FCC Modular Approval Request | Cover Letter(s) | 2022-05-25 | PDF 65.2 KB |
| POA | Cover Letter(s) | 2022-05-25 | PDF 246 KB |
| confidentiality | Cover Letter(s) | 2022-05-25 | PDF 18.6 KB |
| Confidentiality | Cover Letter(s) | 2022-01-14 | PDF 18.6 KB |
| Power of Attorney | Cover Letter(s) | 2022-01-14 | PDF 246 KB |
| MPE | RF Exposure Info | 2022-05-25 | PDF 86 KB |
| MPE Report | RF Exposure Info | 2022-01-14 | PDF 86 KB |
| Block Diagram Metadata only | Block Diagram | PDF 170.9 KB | |
| Schematics Metadata only | Schematics | PDF 3 MB | |
| Operational Description Metadata only | Operational Description | PDF 94.7 KB | |
| Operational Description Metadata only | Operational Description | PDF 99.5 KB |
Application Information
| Application ID | YIOGsKmbOSiZQY8pR62FUw== |
|---|---|
| Final Action Date | 2022-05-25 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0026840850 |
| Model | CPVIK |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Control panel |
| Responsible Party | Claus Kejser, Global Approval Manager, kejser@danfoss.com , +45 2960 9496 |
| Agent | Imad Imad Imad, 7layers GmbH, info@bureauveritas.com |
| Technical Contact | Imad Hjije, 7layers GmbH, imad.hjije@bureauveritas.com , 49 2102 749 314 |
| Non-Technical Contact | Imad Hjije, 7layers GmbH, imad.hjije@bureauveritas.com , 49 2102 749 314 |
| Test Firm | Bernhard Retka, 7layers GmbH, Bernhard.Retka@7layers.com  , 0049 2102 749 452 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 10/25/2022 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC: The certified limited module to be integrated into a new host. Limited Modular Approval. Output power listed is conducted. This LMA is tested and approved as standalone configuration of the provided host(s) as described in the filing, additional evaluation may be required for any system integrated this radio module. Compliance of this device in all final host configurations is the responsibility of the Grantee. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.4 dBi. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| YIOGsKmbOSiZQY8pR62FUw== | 2022-05-25 | Class II permissive change or modification of presently authorized equipment |
| JyEsvSjic2H+aFJud9ib3A== | 2022-05-25 | Class II permissive change or modification of presently authorized equipment |
| MrPjf+Ap8668v2TAp0kX0A== | 2022-01-14 | Original Equipment |
| 6iNcQnY0Tq0OKP4pm8wFjQ== | 2022-01-06 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application YIOGsKmbOSiZQY8pR62FUw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/25/2022 Application Dated: 04/27/2022 |
| Danfoss Drives |
| Ulsnaes 1 |
| Graasten, 6300 Denmark |
| Attention: Claus Kejser , Global Approval Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANSE-CPVIK |
| Name of Grantee: | Danfoss Drives |
| Equipment Class: | Digital Transmission System |
| Notes: | Control panel |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0051 | |||
| 15C | 2412.0 - 2462.0 | 0.043 |
| C2PC: The certified limited module to be integrated into a new host. Limited Modular Approval. Output power listed is conducted. This LMA is tested and approved as standalone configuration of the provided host(s) as described in the filing, additional evaluation may be required for any system integrated this radio module. Compliance of this device in all final host configurations is the responsibility of the Grantee. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.4 dBi. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application YIOGsKmbOSiZQY8pR62FUw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Danfoss Drives Ulsnaes 1 Graasten, 6300 Denmark |
Date of Grant: 05/25/2022 Application Dated: 04/27/2022 |
| Attention: Claus Kejser , Global Approval Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANSE-CPVIK |
| Name of Grantee: | Danfoss Drives |
| Equipment Class: | Digital Transmission System |
| Notes: | Control panel |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0051 | |||
| 15C | 2412.0 - 2462.0 | 0.043 |
| C2PC: The certified limited module to be integrated into a new host. Limited Modular Approval. Output power listed is conducted. This LMA is tested and approved as standalone configuration of the provided host(s) as described in the filing, additional evaluation may be required for any system integrated this radio module. Compliance of this device in all final host configurations is the responsibility of the Grantee. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.4 dBi. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 01/14/2022 Application Dated: 01/07/2022 |
| Danfoss Drives |
| Ulsnaes 1 |
| Graasten, 6300 Denmark |
| Attention: Claus Kejser , Global Approval Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANSE-CPVIK |
| Name of Grantee: | Danfoss Drives |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Control panel |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0071 |
| Limited Modular Approval. Output power listed is conducted. This LMA is tested and approved as standalone configuration of the provided host(s) as described in the filing, additional evaluation may be required for any system integrated this radio module. Compliance of this device in all final host configurations is the responsibility of the Grantee. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.4 dBi. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.CC: This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application MrPjf+Ap8668v2TAp0kX0A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Danfoss Drives Ulsnaes 1 Graasten, 6300 Denmark |
Date of Grant: 01/14/2022 Application Dated: 01/07/2022 |
| Attention: Claus Kejser , Global Approval Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANSE-CPVIK |
| Name of Grantee: | Danfoss Drives |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Control panel |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0071 |
| Limited Modular Approval. Output power listed is conducted. This LMA is tested and approved as standalone configuration of the provided host(s) as described in the filing, additional evaluation may be required for any system integrated this radio module. Compliance of this device in all final host configurations is the responsibility of the Grantee. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.4 dBi. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.CC: This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/25/2022 Application Dated: 04/27/2022 |
| Danfoss Drives |
| Ulsnaes 1 |
| Graasten, 6300 Denmark |
| Attention: Claus Kejser , Global Approval Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANSE-CPVIK |
| Name of Grantee: | Danfoss Drives |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Control panel |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0071 |
| C2PC: The certified limited module to be integrated into a new host. Limited Modular Approval. Output power listed is conducted. This LMA is tested and approved as standalone configuration of the provided host(s) as described in the filing, additional evaluation may be required for any system integrated this radio module. Compliance of this device in all final host configurations is the responsibility of the Grantee. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.4 dBi. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application JyEsvSjic2H+aFJud9ib3A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Danfoss Drives Ulsnaes 1 Graasten, 6300 Denmark |
Date of Grant: 05/25/2022 Application Dated: 04/27/2022 |
| Attention: Claus Kejser , Global Approval Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANSE-CPVIK |
| Name of Grantee: | Danfoss Drives |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Control panel |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0071 |
| C2PC: The certified limited module to be integrated into a new host. Limited Modular Approval. Output power listed is conducted. This LMA is tested and approved as standalone configuration of the provided host(s) as described in the filing, additional evaluation may be required for any system integrated this radio module. Compliance of this device in all final host configurations is the responsibility of the Grantee. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.4 dBi. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 01/06/2022 Application Dated: 12/28/2021 |
| Danfoss Drives |
| Ulsnaes 1 |
| Graasten, 6300 Denmark |
| Attention: Claus Kejser , Global Approval Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANSE-CPVIK |
| Name of Grantee: | Danfoss Drives |
| Equipment Class: | Digital Transmission System |
| Notes: | Control panel |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0051 | |||
| 15C | 2412.0 - 2462.0 | 0.043 |
| Limited Modular Approval. Output power listed is conducted. This LMA is tested and approved as standalone configuration of the provided host(s) as described in the filing, additional evaluation may be required for any system integrated this radio module. Compliance of this device in all final host configurations is the responsibility of the Grantee. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.4 dBi. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.CC: This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 6iNcQnY0Tq0OKP4pm8wFjQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Danfoss Drives Ulsnaes 1 Graasten, 6300 Denmark |
Date of Grant: 01/06/2022 Application Dated: 12/28/2021 |
| Attention: Claus Kejser , Global Approval Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ANSE-CPVIK |
| Name of Grantee: | Danfoss Drives |
| Equipment Class: | Digital Transmission System |
| Notes: | Control panel |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0051 | |||
| 15C | 2412.0 - 2462.0 | 0.043 |
| Limited Modular Approval. Output power listed is conducted. This LMA is tested and approved as standalone configuration of the provided host(s) as described in the filing, additional evaluation may be required for any system integrated this radio module. Compliance of this device in all final host configurations is the responsibility of the Grantee. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.4 dBi. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.CC: This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |