FCC ID 2ANTC-C519M

Wireless IP Camera

by Ansjer Electronics Co., Ltd

Grantee Code: 2ANTC   Product Code: C519M
Latest application date: 2024-01-25

FCC ID Device Details

FCC ID2ANTC-C519M
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ANTC
Product CodeC519M
Applicant BusinessAnsjer Electronics Co., Ltd 🇨🇳
Related Domains ansjer.com
Equipment ClassWireless IP Camera
Test FirmAttestation of Global Compliance (Shenzhen) Co., L

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2024-01-25
5745-5825 MHzOriginal Equipment2024-01-24

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2024-01-25PDF 1.3 MB
Internal PhotosInternal Photos2024-01-25PDF 2.8 MB
External PhotosExternal Photos2024-01-25PDF 1.4 MB
label and locationID Label/Location Info2024-01-25PDF 408.4 KB
Test Setup PhotosTest Setup Photos2024-01-25PDF 1.5 MB
test ReportTest Report2024-01-25PDF 2.8 MB
test ReportTest Report2024-01-25PDF 5.8 MB
test ReportTest Report2024-01-24PDF 5.6 MB
test ReportTest Report2024-01-24PDF 3 MB
US Agent for Service of ProcessAttestation Statements2024-01-25PDF 652.5 KB
ANT reportCover Letter(s)2024-01-25PDF 1.5 MB
Agent Authorization Letter TemplateCover Letter(s)2024-01-25PDF 76.7 KB
Certification Equipment TypeCover Letter(s)2024-01-25PDF 401.7 KB
Certificiation ApplicantCover Letter(s)2024-01-25PDF 400.9 KB
Declaration Channel LimitationCover Letter(s)2024-01-25PDF 16.7 KB
Difference DescriptionCover Letter(s)2024-01-25PDF 9.2 KB
Short & Long Term Confidentiality RequestCover Letter(s)2024-01-25PDF 381.1 KB
Software Configuration Control DeclarationCover Letter(s)2024-01-24PDF 111.1 KB
RF exposure reportRF Exposure Info2024-01-25PDF 1.5 MB
BLOCK Metadata onlyBlock DiagramPDF 132.7 KB
SCH Metadata onlySchematicsPDF 1.1 MB
OPS Metadata onlyOperational DescriptionPDF 518 KB
Software Security Info Metadata onlySDR Software/Security Info.PDF 155.9 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 468.6 KB

Application Information

Application IDVSDMhna0BHxcJiVVwR1aBw==
Final Action Date2024-01-25
Application PurposeOriginal Equipment
Applicant FRN0032926750
ModelC519M
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless IP Camera
Responsible PartyLanner Lan, tech@ansjer.com , 0756-6259750
Technical ContactAnsjer Electronics Co., Ltd, tech@ansjer.com
Test FirmDoris Li, Attestation of Global Compliance (Shenzhen) Co., L, dorisli@agc-cert.com , +86-755-25234088
TCB Emailanezam@qai.org
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
VSDMhna0BHxcJiVVwR1aBw==2024-01-25Original Equipment
pjpzIHTeEmRNW9Nc0UtinQ==2024-01-24Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.111900015CCC
5180-5240 MHz0.014615ECC
5260-5320 MHz0.014915ECC, ND
5500-5700 MHz0.013915ECC, ND
5745-5825 MHz0.011815ECC

Grants

TCB Grant - Application VSDMhna0BHxcJiVVwR1aBw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  QAI LABORATORIES LTD
3980 North Fraser Way
Burnaby, BC, V5J5K5
Canada
Date of Grant: 01/25/2024

Application Dated: 01/24/2024
Ansjer Electronics Co., Ltd
301,1st Building,No.21 Yongtian Road,
Xiangzhou,Zhuhai, Guangdong, China
Zhuhai,
China
 
Attention: Lanner Lan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANTC-C519M
Name of Grantee:  Ansjer Electronics Co., Ltd
Equipment Class: Digital Transmission System
Notes: Wireless IP Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.1119  

Power listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application VSDMhna0BHxcJiVVwR1aBw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ansjer Electronics Co., Ltd
301,1st Building,No.21 Yongtian Road, Xiangzhou,Zhuhai, Guangdong, China
Zhuhai,
China
  Date of Grant: 01/25/2024

Application Dated: 01/24/2024
 
Attention: Lanner Lan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANTC-C519M
Name of Grantee:  Ansjer Electronics Co., Ltd
Equipment Class: Digital Transmission System
Notes: Wireless IP Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.1119  

Power listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application pjpzIHTeEmRNW9Nc0UtinQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  QAI LABORATORIES LTD
3980 North Fraser Way
Burnaby, BC, V5J5K5
Canada
Date of Grant: 01/24/2024

Application Dated: 01/24/2024
Ansjer Electronics Co., Ltd
301,1st Building,No.21 Yongtian Road,
Xiangzhou,Zhuhai, Guangdong, China
Zhuhai,
China
 
Attention: Lanner Lan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANTC-C519M
Name of Grantee:  Ansjer Electronics Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless IP Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0146  
CC ND 15E 5260.0  -  5320.0 0.0149  
CC ND 15E 5500.0  -  5700.0 0.0139  
CC 15E 5745.0  -  5825.0 0.0118  

Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application pjpzIHTeEmRNW9Nc0UtinQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ansjer Electronics Co., Ltd
301,1st Building,No.21 Yongtian Road, Xiangzhou,Zhuhai, Guangdong, China
Zhuhai,
China
  Date of Grant: 01/24/2024

Application Dated: 01/24/2024
 
Attention: Lanner Lan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ANTC-C519M
Name of Grantee:  Ansjer Electronics Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless IP Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0146  
CC ND 15E 5260.0  -  5320.0 0.0149  
CC ND 15E 5500.0  -  5700.0 0.0139  
CC 15E 5745.0  -  5825.0 0.0118  

Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: