FCC ID 2AO8L-WL18DBMOD
Wifi and Bluetooth Module
by GE Healthcare Finland Oy
Grantee Code: 2AO8L Product Code: WL18DBMOD
Latest application date: 2022-12-15
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-12-15 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2021-12-22 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2021-12-22 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 | 2021-12-10 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 | 2021-12-10 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 | 2021-12-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2021-12-22 | PDF 436 KB |
| Label Artwork | ID Label/Location Info | 2021-12-22 | PDF 119.8 KB |
| Label Location Info | ID Label/Location Info | 2021-12-22 | PDF 119.8 KB |
| Test Setup Photos BLE | Test Setup Photos | 2022-12-15 | PDF 534.8 KB |
| Test Setup Photos Co Located Transmitters | Test Setup Photos | 2022-12-15 | PDF 578.9 KB |
| Test Report B Part 2 | Test Setup Photos | 2021-12-22 | PDF 3.9 MB |
| Test Report C | Test Setup Photos | 2021-12-22 | PDF 4.5 MB |
| Test Setup Photos | Test Setup Photos | 2021-12-22 | PDF 739.9 KB |
| Test Setup Photos 1 | Test Setup Photos | 2021-12-22 | PDF 739.9 KB |
| Test Setup Photos 2 | Test Setup Photos | 2021-12-22 | PDF 758.1 KB |
| Antenna Specs | Test Report | 2022-12-15 | PDF 4.2 MB |
| Antenna Specs HUB SB | Test Report | 2022-12-15 | PDF 391.6 KB |
| SAR Test Report | Test Report | 2022-12-15 | PDF 5 MB |
| Test Report Antenna 1 | Test Report | 2022-12-15 | PDF 2.1 MB |
| Test Report Antenna 2 | Test Report | 2022-12-15 | PDF 3.8 MB |
| Test Report BLE | Test Report | 2022-12-15 | PDF 1.2 MB |
| Test Report Co Located Transmitters | Test Report | 2022-12-15 | PDF 647 KB |
| Antenna Test Report | Test Report | 2021-12-22 | PDF 391.6 KB |
| RF Test Report | Test Report | 2021-12-22 | PDF 1.1 MB |
| SAR Test Report | Test Report | 2021-12-22 | PDF 3.9 MB |
| Test Report A | Test Report | 2021-12-22 | PDF 3.5 MB |
| Test Report B Part 1 | Test Report | 2021-12-22 | PDF 3.7 MB |
| Test Report B Part 2 | Test Report | 2021-12-22 | PDF 3.9 MB |
| Test Report C | Test Report | 2021-12-22 | PDF 4.5 MB |
| Test Report Co-Located Transmitters | Test Report | 2021-12-22 | PDF 1.1 MB |
| Test Report WLAN | Test Report | 2021-12-22 | PDF 1.6 MB |
| Applicant Declaration Letter | Cover Letter(s) | 2022-12-15 | PDF 353 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2022-12-15 | PDF 185.4 KB |
| FCC Cover Letter | Cover Letter(s) | 2022-12-15 | PDF 281.8 KB |
| Applicant Declaration Letter | Cover Letter(s) | 2021-12-22 | PDF 981.1 KB |
| Change in ID Letter | Cover Letter(s) | 2021-12-22 | PDF 1,014.7 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2021-12-10 | PDF 636.9 KB |
| POA Change in ID | Cover Letter(s) | 2021-12-10 | PDF 141 KB |
| Operational Description AMS_PSM Metadata only | Operational Description | PDF 1.5 MB | |
| Operational Description Ambulatory Hub Metadata only | Operational Description | PDF 2.8 MB | |
| Operational Description BOM Metadata only | Operational Description | PDF 306.3 KB | |
| Operational Description Bluetooth Metadata only | Operational Description | PDF 307.7 KB | |
| Operational Description Hub PCB Layout Part 1 Metadata only | Operational Description | PDF 5.5 MB | |
| Operational Description Hub PCB Layout Part 2 Metadata only | Operational Description | PDF 3.5 MB | |
| Operational Description Hub WLAN Metadata only | Operational Description | PDF 318.6 KB | |
| Operational Description Integration Instructions Metadata only | Operational Description | PDF 123.7 KB | |
| Operational Description Portrait Mobile Monitoring Metadata only | Operational Description | PDF 5.6 MB | |
| Operational Description Stamped Wearable Hub Metadata only | Operational Description | PDF 3.4 MB | |
| Operational Description Stamped Wearable Hub Engine Board Metadata only | Operational Description | PDF 3.4 MB |
Application Information
| Application ID | SU2IWZU649yWJtxSIlFHug== |
|---|---|
| Final Action Date | 2022-12-15 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0027334770 |
| Model | WL18DBMOD |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wifi and Bluetooth Module |
| Responsible Party | Timo Hakala, Senior RF System Engineer, timo.hakala@ge.com  , +358504835002 |
| Technical Contact | Timo Hakala, GE Healthcare Finland Oy, timo.hakala@ge.com , 358 50 483 5002 |
| Non-Technical Contact | Timo Hakala, GE Healthcare Finland Oy, timo.hakala@ge.com , 358 50 483 5002 |
| Test Firm | Janne Nyman, SGS Fimko Oy, janne.nyman@sgs.com  , +358 9 696 361 |
| TCB Email | uscts.tcb@sgs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Certified Module will not be sold to the general public, only for internal use by grantee, and permanently closed under RF shielding in host Enclosure and glued shut. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: To add the monopole bottom antenna: 6.0 dBi. To enable portable use when integrated into GE Patient Monitor, Model Number: Portrait HUB01 / HUBXB. To enable simultaneous use with MBAN and NFC radios. The highest reported SAR for body and simultaneous use exposure conditions are 0.64 W/kg and 1.42 W/kg, respectively. Class II Permissive Change: to enable BLE radio with monopole bottom antenna: 6.0 dBi. To enable portable use when integrated into GE Patient Monitor, Model Number: Portrait HUB01 / HUBXB. To enable simultaneous use with MBAN and NFC radios. The highest reported SAR for body and simultaneous use exposure conditions are 0.03 W/kg (BLE alone) and 1.42 W/kg, respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| SU2IWZU649yWJtxSIlFHug== | 2022-12-15 | Class II permissive change or modification of presently authorized equipment |
| cTSXzs3H1MQjljUzc+OWDw== | 2021-12-22 | Class II permissive change or modification of presently authorized equipment |
| SsaZGvDd1gyeUjUvWpYqUA== | 2021-12-22 | Class II permissive change or modification of presently authorized equipment |
| Z1Ak4RxV0RYPc1np4s1+lg== | 2021-12-10 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 |
| 12rPZoaorsqcxb2zkXRqVg== | 2021-12-10 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 |
| xTd4cZ2hL+LJl1OlrF15kw== | 2021-12-09 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0146000 | 15C | CC |
| 2402-2480 MHz | 0.0049 | 15C | CC |
| 2412-2462 MHz | 0.2432000 | 15C | CC, MO |
| 2412-2462 MHz | 0.2432 | 15C | CC, MO |
| 5180-5240 MHz | 0.0382 | 15E | CC |
| 5180-5240 MHz | 0.0382 | 15E | 38, CC |
| 5190-5230 MHz | 0.0499 | 15E | CC |
| 5190-5230 MHz | 0.0499 | 15E | 38, CC |
| 5260-5320 MHz | 0.0244 | 15E | CC, ND |
| 5260-5320 MHz | 0.0244 | 15E | 38, CC, ND |
| 5270-5310 MHz | 0.0525 | 15E | CC, ND |
| 5270-5310 MHz | 0.0525 | 15E | 38, CC, ND |
| 5500-5700 MHz | 0.0698 | 15E | CC, ND |
| 5500-5700 MHz | 0.0698 | 15E | 38, CC, ND |
| 5745-5825 MHz | 0.0614 | 15E | CC |
| 5745-5825 MHz | 0.0614 | 15E | 38, CC |
Grants
TCB Grant - Application Z1Ak4RxV0RYPc1np4s1+lg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 12/10/2021 Application Dated: 12/10/2021 |
| GE Healthcare Finland Oy |
| Kuortaneenkatu 2 |
| Helsinki, 00510 Finland |
| Attention: Timo Hakala , Senior RF System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AO8L-WL18DBMOD |
| Name of Grantee: | GE Healthcare Finland Oy |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0382 | ||
| 38 CC | 15E | 5190.0 - 5230.0 | 0.0499 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0244 | ||
| 38 CC ND | 15E | 5270.0 - 5310.0 | 0.0525 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Certified Module will not be sold to the general public, only for internal use by grantee, and permanently closed under RF shielding in host Enclosure and glued shut. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Z1Ak4RxV0RYPc1np4s1+lg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
GE Healthcare Finland Oy Kuortaneenkatu 2 Helsinki, 00510 Finland |
Date of Grant: 12/10/2021 Application Dated: 12/10/2021 |
| Attention: Timo Hakala , Senior RF System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AO8L-WL18DBMOD |
| Name of Grantee: | GE Healthcare Finland Oy |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0382 | ||
| 38 CC | 15E | 5190.0 - 5230.0 | 0.0499 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0244 | ||
| 38 CC ND | 15E | 5270.0 - 5310.0 | 0.0525 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Certified Module will not be sold to the general public, only for internal use by grantee, and permanently closed under RF shielding in host Enclosure and glued shut. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 12/09/2021 Application Dated: 12/09/2021 |
| GE Healthcare Finland Oy |
| Kuortaneenkatu 2 |
| Helsinki, 00510 Finland |
| Attention: Timo Hakala , Senior RF System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AO8L-WL18DBMOD |
| Name of Grantee: | GE Healthcare Finland Oy |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Certified Module will not be sold to the general public, only for internal use by grantee, and permanently closed under RF shielding in host Enclosure and glued shut. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application xTd4cZ2hL+LJl1OlrF15kw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
GE Healthcare Finland Oy Kuortaneenkatu 2 Helsinki, 00510 Finland |
Date of Grant: 12/09/2021 Application Dated: 12/09/2021 |
| Attention: Timo Hakala , Senior RF System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AO8L-WL18DBMOD |
| Name of Grantee: | GE Healthcare Finland Oy |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Certified Module will not be sold to the general public, only for internal use by grantee, and permanently closed under RF shielding in host Enclosure and glued shut. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 12/15/2022 Application Dated: 12/14/2022 |
| GE Healthcare Finland Oy |
| Kuortaneenkatu 2 |
| Helsinki, 00510 Finland |
| Attention: Timo Hakala , Senior RF System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AO8L-WL18DBMOD |
| Name of Grantee: | GE Healthcare Finland Oy |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Certified Module will not be sold to the general public, only for internal use by grantee, and permanently closed under RF shielding in host Enclosure and glued shut. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: To add the monopole bottom antenna: 6.0 dBi. To enable portable use when integrated into GE Patient Monitor, Model Number: Portrait HUB01 / HUBXB. To enable simultaneous use with MBAN and NFC radios. The highest reported SAR for body and simultaneous use exposure conditions are 0.64 W/kg and 1.42 W/kg, respectively. Class II Permissive Change: to enable BLE radio with monopole bottom antenna: 6.0 dBi. To enable portable use when integrated into GE Patient Monitor, Model Number: Portrait HUB01 / HUBXB. To enable simultaneous use with MBAN and NFC radios. The highest reported SAR for body and simultaneous use exposure conditions are 0.03 W/kg (BLE alone) and 1.42 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application SU2IWZU649yWJtxSIlFHug==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
GE Healthcare Finland Oy Kuortaneenkatu 2 Helsinki, 00510 Finland |
Date of Grant: 12/15/2022 Application Dated: 12/14/2022 |
| Attention: Timo Hakala , Senior RF System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AO8L-WL18DBMOD |
| Name of Grantee: | GE Healthcare Finland Oy |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Certified Module will not be sold to the general public, only for internal use by grantee, and permanently closed under RF shielding in host Enclosure and glued shut. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: To add the monopole bottom antenna: 6.0 dBi. To enable portable use when integrated into GE Patient Monitor, Model Number: Portrait HUB01 / HUBXB. To enable simultaneous use with MBAN and NFC radios. The highest reported SAR for body and simultaneous use exposure conditions are 0.64 W/kg and 1.42 W/kg, respectively. Class II Permissive Change: to enable BLE radio with monopole bottom antenna: 6.0 dBi. To enable portable use when integrated into GE Patient Monitor, Model Number: Portrait HUB01 / HUBXB. To enable simultaneous use with MBAN and NFC radios. The highest reported SAR for body and simultaneous use exposure conditions are 0.03 W/kg (BLE alone) and 1.42 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 12/22/2021 Application Dated: 12/10/2021 |
| GE Healthcare Finland Oy |
| Kuortaneenkatu 2 |
| Helsinki, 00510 Finland |
| Attention: Timo Hakala , Senior RF System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AO8L-WL18DBMOD |
| Name of Grantee: | GE Healthcare Finland Oy |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi and Bluetooth Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Certified Module will not be sold to the general public, only for internal use by grantee, and permanently closed under RF shielding in host Enclosure and glued shut. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: To add the monopole bottom antenna: 6.0 dBi. To enable portable use when integrated into GE Patient Monitor, Model Number: Portrait HUB01. To enable simultaneous use with MBAN and NFC radios. The highest reported SAR for body and simultaneous use exposure conditions are 0.64 W/kg and 1.42 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application SsaZGvDd1gyeUjUvWpYqUA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
GE Healthcare Finland Oy Kuortaneenkatu 2 Helsinki, 00510 Finland |
Date of Grant: 12/22/2021 Application Dated: 12/10/2021 |
| Attention: Timo Hakala , Senior RF System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AO8L-WL18DBMOD |
| Name of Grantee: | GE Healthcare Finland Oy |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Certified Module will not be sold to the general public, only for internal use by grantee, and permanently closed under RF shielding in host Enclosure and glued shut. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: To add the monopole bottom antenna: 6.0 dBi. To enable portable use when integrated into GE Patient Monitor, Model Number: Portrait HUB01. To enable simultaneous use with MBAN and NFC radios. The highest reported SAR for body and simultaneous use exposure conditions are 0.64 W/kg and 1.42 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 12/22/2021 Application Dated: 12/22/2021 |
| GE Healthcare Finland Oy |
| Kuortaneenkatu 2 |
| Helsinki, 00510 Finland |
| Attention: Timo Hakala , Senior RF System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AO8L-WL18DBMOD |
| Name of Grantee: | GE Healthcare Finland Oy |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wifi and Bluetooth Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0382 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0499 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0244 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.0525 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Certified Module will not be sold to the general public, only for internal use by grantee, and permanently closed under RF shielding in host Enclosure and glued shut. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: To add the monopole bottom and top antennas: 4.0 dBi (bottom) and 6.8 dBi (top). To enable portable use when integrated into GE Patient Monitor, Model Number: Portrait HUB01. To enable simultaneous use with MBAN and NFC radios. The highest reported SAR for body and simultaneous use exposure conditions are 1.17 W/kg and 1.42 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application cTSXzs3H1MQjljUzc+OWDw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
GE Healthcare Finland Oy Kuortaneenkatu 2 Helsinki, 00510 Finland |
Date of Grant: 12/22/2021 Application Dated: 12/22/2021 |
| Attention: Timo Hakala , Senior RF System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AO8L-WL18DBMOD |
| Name of Grantee: | GE Healthcare Finland Oy |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0382 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0499 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0244 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.0525 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Certified Module will not be sold to the general public, only for internal use by grantee, and permanently closed under RF shielding in host Enclosure and glued shut. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: To add the monopole bottom and top antennas: 4.0 dBi (bottom) and 6.8 dBi (top). To enable portable use when integrated into GE Patient Monitor, Model Number: Portrait HUB01. To enable simultaneous use with MBAN and NFC radios. The highest reported SAR for body and simultaneous use exposure conditions are 1.17 W/kg and 1.42 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 12/10/2021 Application Dated: 12/10/2021 |
| GE Healthcare Finland Oy |
| Kuortaneenkatu 2 |
| Helsinki, 00510 Finland |
| Attention: Timo Hakala , Senior RF System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AO8L-WL18DBMOD |
| Name of Grantee: | GE Healthcare Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Certified Module will not be sold to the general public, only for internal use by grantee, and permanently closed under RF shielding in host Enclosure and glued shut. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 12rPZoaorsqcxb2zkXRqVg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
GE Healthcare Finland Oy Kuortaneenkatu 2 Helsinki, 00510 Finland |
Date of Grant: 12/10/2021 Application Dated: 12/10/2021 |
| Attention: Timo Hakala , Senior RF System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AO8L-WL18DBMOD |
| Name of Grantee: | GE Healthcare Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Certified Module will not be sold to the general public, only for internal use by grantee, and permanently closed under RF shielding in host Enclosure and glued shut. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |