FCC ID 2AOC9-ZEN-BDM11A

Dual Bluetooth Module

by Shanghai Zenchant Electronic CO.,LTD.

Grantee Code: 2AOC9   Product Code: ZENBDM11A
Latest application date: 2024-06-03

FCC ID Device Details

FCC ID2AOC9-ZEN-BDM11A
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AOC9
Product CodeZENBDM11A
Applicant BusinessShanghai Zenchant Electronic CO.,LTD. 🇨🇳
Related Domains zenchant.com
Equipment ClassDual Bluetooth Module
Test FirmShenzhen Morlab Communications Technology Co. Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2024-06-03
2402-2480 MHzOriginal Equipment2024-06-03

Exhibits

DocumentTypeAvailableFile
UMUsers Manual2024-12-01PDF 629.6 KB
Internal PhotosInternal Photos2024-12-01PDF 291 KB
External PhotosExternal Photos2024-12-01PDF 154.5 KB
label & label locationID Label/Location Info2024-06-03PDF 50.9 KB
Test Setup Photos_DSSTest Setup Photos2024-12-01PDF 670.9 KB
Test Setup Photos_DTSTest Setup Photos2024-12-01PDF 702.4 KB
SZ24040317W01_Zenchant_ZEN-BDM11A_BLE_DTSTest Report2024-06-03PDF 2.6 MB
SZ24040317W02_Zenchant_ZEN-BDM11A_BTclassic_DSSTest Report2024-06-03PDF 4.6 MB
antennaTest Report2024-06-03PDF 1 MB
Attestation_COVERED_EQUIPMENT Metadata onlyCover Letter(s)2024-06-03PDF 236.9 KB
Attestation_COVERED_EQUIPMENTAttestation Statements2024-06-03PDF 236.9 KB
Attestation_Letter_COVERED_EQUIPMENTAttestation Statements2024-06-03PDF 236.9 KB
Attestation_Letter_US_AGENTAttestation Statements2024-06-03PDF 324.4 KB
Attestation_US_AGENTAttestation Statements2024-06-03PDF 324.4 KB
Attestation_US_AGENT Metadata onlyCover Letter(s)2024-06-03PDF 324.4 KB
ConfidentialityCover Letter(s)2024-06-03PDF 346.3 KB
Modular_request_letterCover Letter(s)2024-06-03PDF 107.9 KB
POACover Letter(s)2024-06-03PDF 261.4 KB
SZ24040317S01_Zenchant_ZEN-BDM11A_FCC_RF ExposureRF Exposure Info2024-06-03PDF 444.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 44.8 KB
Schematic Metadata onlySchematicsPDF 203.9 KB
OP Metadata onlyOperational DescriptionPDF 65 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 131.1 KB

Application Information

Application IDz3AJ1uFqFPhgb+GVmZlu5w==
Final Action Date2024-06-03
Application PurposeOriginal Equipment
Applicant FRN0027011543
ModelZEN-BDM11A
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionDual Bluetooth Module
Responsible Partyluhui zhang, cs@zenchant.com , 021-64837686
Test FirmMr. Su Feng, Shenzhen Morlab Communications Technology Co. Ltd., Zx.sun@morlab.cn , +86 755 36698566
TCB Emailbentje.holger@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/01/2024
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is maximum peak conducted. This device has integrated DSS and DTS transmitters certified under the same FCC ID. Output power is maximum peak conducted. Single Module approval is filing. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Applications

Application IDDatePurpose
z3AJ1uFqFPhgb+GVmZlu5w==2024-06-03Original Equipment
CVMdIojwH4ikSw54WHXNKw==2024-06-03Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.001230015CCC
2402-2480 MHz0.001770015CCC

Grants

TCB Grant - Application z3AJ1uFqFPhgb+GVmZlu5w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 06/03/2024

Application Dated: 06/03/2024
Shanghai Zenchant Electronic CO.,LTD.
Room 1202-1204,Building A,Noble International
Center,No.908 xiuwen Road,Minhang District
Shanghai,
China
 
Attention: luhui zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AOC9-ZEN-BDM11A
Name of Grantee:  Shanghai Zenchant Electronic CO.,LTD.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Dual Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00177  

Output power is maximum peak conducted. This device has integrated DSS and DTS transmitters certified under the same FCC ID. Output power is maximum peak conducted. Single Module approval is filing. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application z3AJ1uFqFPhgb+GVmZlu5w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shanghai Zenchant Electronic CO.,LTD.
Room 1202-1204,Building A,Noble International Center,No.908 xiuwen Road,Minhang District
Shanghai,
China
  Date of Grant: 06/03/2024

Application Dated: 06/03/2024
 
Attention: luhui zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AOC9-ZEN-BDM11A
Name of Grantee:  Shanghai Zenchant Electronic CO.,LTD.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Dual Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00177  

Output power is maximum peak conducted. This device has integrated DSS and DTS transmitters certified under the same FCC ID. Output power is maximum peak conducted. Single Module approval is filing. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application CVMdIojwH4ikSw54WHXNKw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 06/03/2024

Application Dated: 06/03/2024
Shanghai Zenchant Electronic CO.,LTD.
Room 1202-1204,Building A,Noble International
Center,No.908 xiuwen Road,Minhang District
Shanghai,
China
 
Attention: luhui zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AOC9-ZEN-BDM11A
Name of Grantee:  Shanghai Zenchant Electronic CO.,LTD.
Equipment Class: Digital Transmission System
Notes: Dual Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00123  

Output power is maximum peak conducted. This device has integrated DSS and DTS transmitters certified under the same FCC ID. Output power is maximum peak conducted. Single Module approval is filing. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application CVMdIojwH4ikSw54WHXNKw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shanghai Zenchant Electronic CO.,LTD.
Room 1202-1204,Building A,Noble International Center,No.908 xiuwen Road,Minhang District
Shanghai,
China
  Date of Grant: 06/03/2024

Application Dated: 06/03/2024
 
Attention: luhui zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AOC9-ZEN-BDM11A
Name of Grantee:  Shanghai Zenchant Electronic CO.,LTD.
Equipment Class: Digital Transmission System
Notes: Dual Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00123  

Output power is maximum peak conducted. This device has integrated DSS and DTS transmitters certified under the same FCC ID. Output power is maximum peak conducted. Single Module approval is filing. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: