FCC ID 2AOC9-ZENBDM12A
Dual Bluetooth Module
by Shanghai Zenchant Electronic CO.,LTD.
Grantee Code: 2AOC9 Product Code: ZENBDM12A
Latest application date: 2023-04-07
FCC ID Device Details
| FCC ID | 2AOC9-ZENBDM12A |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AOC9 |
| Product Code | ZENBDM12A |
| Applicant Business | Shanghai Zenchant Electronic CO.,LTD. 🇨🇳 |
| Related Domains |  zenchant.com |
| Equipment Class | Dual Bluetooth Module |
| Test Firm | Shenzhen Morlab Communications Technology Co. Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2023-04-07 |
| 2402-2480 MHz | Original Equipment | 2023-04-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User_Manual | Users Manual | 2023-10-04 | PDF 657.3 KB |
| Internal_Photo | Internal Photos | 2023-10-04 | PDF 454.9 KB |
| External_Photo | External Photos | 2023-10-04 | PDF 156.9 KB |
| Label | ID Label/Location Info | 2023-04-07 | PDF 95.4 KB |
| Test_Setup_Photos | Test Setup Photos | 2023-10-04 | PDF 636.5 KB |
| Test_Setup_Photos | Test Setup Photos | 2023-10-04 | PDF 611.4 KB |
| Tsup_SAR | Test Setup Photos | 2023-10-04 | PDF 875.2 KB |
| SZ22080212E01_Gain | Test Report | 2023-04-07 | PDF 666.2 KB |
| SZ23020243W01_BLE_DTS | Test Report | 2023-04-07 | PDF 2.9 MB |
| SZ23020243W02_BTclassic_DSS | Test Report | 2023-04-07 | PDF 4.9 MB |
| Attestation_Statements_Part2.911(d)(5) | Attestation Statements | 2023-04-07 | PDF 69.9 KB |
| Attestation_Statements_Part2.911(d)(7) | Attestation Statements | 2023-04-07 | PDF 131.6 KB |
| Confidentiality_Request_Letter | Cover Letter(s) | 2023-04-07 | PDF 100.2 KB |
| Modular_Approval_Checklist | Cover Letter(s) | 2023-04-07 | PDF 95.4 KB |
| POA | Cover Letter(s) | 2023-04-07 | PDF 72.4 KB |
| SZ23020243S01_RF_Exposure | RF Exposure Info | 2023-04-07 | PDF 317.6 KB |
| Block_Diagram Metadata only | Block Diagram | PDF 33.9 KB | |
| SCH Metadata only | Schematics | PDF 274.1 KB | |
| Operational_Description Metadata only | Operational Description | PDF 129.1 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 63.3 KB |
Application Information
| Application ID | cf8A7aMy8oEhxlKJqUEaTQ== |
|---|---|
| Final Action Date | 2023-04-07 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0027011543 |
| Model | ZENBDM12A |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Dual Bluetooth Module |
| Responsible Party | luhui zhang, cs@zenchant.com , 021-64837686 |
| Test Firm | Mr. Su Feng, Shenzhen Morlab Communications Technology Co. Ltd., Zx.sun@morlab.cn  , +86 755 36698566 |
| TCB Email | bentje.holger@phoenix-testlab.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 10/04/2023 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power is maximum peak conducted.This device has integrated DSS and DTS transmitters certified under the same FCC ID.Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| cf8A7aMy8oEhxlKJqUEaTQ== | 2023-04-07 | Original Equipment |
| QOnFanEewvtcWDcXBQkM6A== | 2023-04-07 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application QOnFanEewvtcWDcXBQkM6A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 04/07/2023 Application Dated: 04/06/2023 |
| Shanghai Zenchant Electronic CO.,LTD. |
| Room 1202-1204,Building A,Noble International |
| Center,No.908 xiuwen Road,Minhang District |
| Shanghai, China |
| Attention: luhui zhang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOC9-ZENBDM12A |
| Name of Grantee: | Shanghai Zenchant Electronic CO.,LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Output power is maximum peak conducted. This device has integrated DSS and DTS transmitters certified under the same FCC ID. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application QOnFanEewvtcWDcXBQkM6A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Zenchant Electronic CO.,LTD. Room 1202-1204,Building A,Noble International Center,No.908 xiuwen Road,Minhang District Shanghai, China |
Date of Grant: 04/07/2023 Application Dated: 04/06/2023 |
| Attention: luhui zhang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOC9-ZENBDM12A |
| Name of Grantee: | Shanghai Zenchant Electronic CO.,LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Output power is maximum peak conducted. This device has integrated DSS and DTS transmitters certified under the same FCC ID. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 04/07/2023 Application Dated: 04/06/2023 |
| Shanghai Zenchant Electronic CO.,LTD. |
| Room 1202-1204,Building A,Noble International |
| Center,No.908 xiuwen Road,Minhang District |
| Shanghai, China |
| Attention: luhui zhang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOC9-ZENBDM12A |
| Name of Grantee: | Shanghai Zenchant Electronic CO.,LTD. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Dual Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Output power is maximum peak conducted. This device has integrated DSS and DTS transmitters certified under the same FCC ID. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application cf8A7aMy8oEhxlKJqUEaTQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Zenchant Electronic CO.,LTD. Room 1202-1204,Building A,Noble International Center,No.908 xiuwen Road,Minhang District Shanghai, China |
Date of Grant: 04/07/2023 Application Dated: 04/06/2023 |
| Attention: luhui zhang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOC9-ZENBDM12A |
| Name of Grantee: | Shanghai Zenchant Electronic CO.,LTD. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Dual Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Output power is maximum peak conducted. This device has integrated DSS and DTS transmitters certified under the same FCC ID. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |