FCC ID 2AOC9-ZENBDM10AV20
Dual Bluetooth Module
by Shanghai Zenchant Electronic CO.,LTD.
Grantee Code: 2AOC9 Product Code: ZENBDM10AV20
Latest application date: 2022-03-17
FCC ID Device Details
| FCC ID | 2AOC9-ZENBDM10AV20 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AOC9 |
| Product Code | ZENBDM10AV20 |
| Applicant Business | Shanghai Zenchant Electronic CO.,LTD. 🇨🇳 |
| Related Domains |  zenchant.com |
| Equipment Class | Dual Bluetooth Module |
| Test Firm | Shenzhen Morlab Communications Technology Co. Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2022-03-17 |
| 2402-2480 MHz | Original Equipment | 2022-03-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User_Manual | Users Manual | 2022-09-14 | PDF 1.7 MB |
| Internal_Photos | Internal Photos | 2022-09-14 | PDF 283.2 KB |
| External_Photos | External Photos | 2022-09-14 | PDF 239.6 KB |
| Label | ID Label/Location Info | 2022-03-17 | PDF 68.9 KB |
| Test_Setup_Photos_DSS | Test Setup Photos | 2022-09-14 | PDF 625 KB |
| Test_Setup_Photos_DTS | Test Setup Photos | 2022-09-14 | PDF 624.8 KB |
| SZ22020091W01_Zenchant_ZEN-BDM10A-V2.0_BLE_DTS | Test Report | 2022-03-17 | PDF 2.7 MB |
| SZ22020091W02_Zenchant_ZEN-BDM10A-V2.0_BTclassic_DSS | Test Report | 2022-03-17 | PDF 2.9 MB |
| Authorization_Letter | Cover Letter(s) | 2022-03-17 | PDF 21.5 KB |
| Confidentiality_Request_Letter | Cover Letter(s) | 2022-03-17 | PDF 14.8 KB |
| Modular_request_letter | Cover Letter(s) | 2022-03-17 | PDF 20.7 KB |
| RF_Exposure | RF Exposure Info | 2022-03-17 | PDF 316.2 KB |
| Block_Diagram Metadata only | Block Diagram | PDF 52.7 KB | |
| Schematics Metadata only | Schematics | PDF 264.2 KB | |
| Operation_Description Metadata only | Operational Description | PDF 55.2 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 68.2 KB |
Application Information
| Application ID | Zl5b8UOx/IxeZeUQBc3k7w== |
|---|---|
| Final Action Date | 2022-03-17 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0027011543 |
| Model | ZENBDM10AV20 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Dual Bluetooth Module |
| Responsible Party | luhui zhang, cs@zenchant.com , 021-64837686 |
| Test Firm | Mr. Su Feng, Shenzhen Morlab Communications Technology Co. Ltd., Zx.sun@morlab.cn  , +86 755 36698566 |
| TCB Email | bentje.holger@phoenix-testlab.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 09/14/2022 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power is maximum peak conducted.This device has integrated DSS and DTS transmitters certified under the same FCC ID.Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Zl5b8UOx/IxeZeUQBc3k7w== | 2022-03-17 | Original Equipment |
| IU3/ROeONzHnVws0u4T2wg== | 2022-03-17 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Zl5b8UOx/IxeZeUQBc3k7w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 03/17/2022 Application Dated: 03/17/2022 |
| Shanghai Zenchant Electronic CO.,LTD. |
| Room 1203,Building A,Noble International Center, |
| No.908 xiuwen Road,Minghang District, |
| Shanghai, China |
| Attention: luhui zhang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOC9-ZENBDM10AV20 |
| Name of Grantee: | Shanghai Zenchant Electronic CO.,LTD. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Dual Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Output power is maximum peak conducted. This device has integrated DSS and DTS transmitters certified under the same FCC ID. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Zl5b8UOx/IxeZeUQBc3k7w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Zenchant Electronic CO.,LTD. Room 1203,Building A,Noble International Center, No.908 xiuwen Road,Minghang District, Shanghai, China |
Date of Grant: 03/17/2022 Application Dated: 03/17/2022 |
| Attention: luhui zhang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOC9-ZENBDM10AV20 |
| Name of Grantee: | Shanghai Zenchant Electronic CO.,LTD. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Dual Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Output power is maximum peak conducted. This device has integrated DSS and DTS transmitters certified under the same FCC ID. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 03/17/2022 Application Dated: 03/17/2022 |
| Shanghai Zenchant Electronic CO.,LTD. |
| Room 1203,Building A,Noble International Center, |
| No.908 xiuwen Road,Minghang District, |
| Shanghai, China |
| Attention: luhui zhang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOC9-ZENBDM10AV20 |
| Name of Grantee: | Shanghai Zenchant Electronic CO.,LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0023 |
| Output power is maximum peak conducted. This device has integrated DSS and DTS transmitters certified under the same FCC ID. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application IU3/ROeONzHnVws0u4T2wg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Zenchant Electronic CO.,LTD. Room 1203,Building A,Noble International Center, No.908 xiuwen Road,Minghang District, Shanghai, China |
Date of Grant: 03/17/2022 Application Dated: 03/17/2022 |
| Attention: luhui zhang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOC9-ZENBDM10AV20 |
| Name of Grantee: | Shanghai Zenchant Electronic CO.,LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0023 |
| Output power is maximum peak conducted. This device has integrated DSS and DTS transmitters certified under the same FCC ID. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |