FCC ID 2AOFDL-LRNWB28

Lierda Feng Series WB28 LoRa Mesh Module

by Zhejiang Lierda Internet of Things Technology Co., Ltd.

Grantee Code: 2AOFD   Product Code: LLRNWB28
Latest application date: 2025-11-26

FCC ID Device Details

FCC ID2AOFDL-LRNWB28
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AOFD
Product CodeLLRNWB28
Applicant BusinessZhejiang Lierda Internet of Things Technology Co., Ltd. 🇨🇳
Related Domains lierda.com
Equipment ClassLierda Feng Series WB28 LoRa Mesh Module
Test FirmShenzhen Morlab Communications Technology Co. Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.4-926.025 MHzOriginal Equipment2025-11-26

Exhibits

DocumentTypeAvailableFile
User_ManualUsers Manual2026-05-26PDF 1.9 MB
Internal_PhotographsInternal Photos2026-05-26PDF 246 KB
External_PhotographsExternal Photos2026-05-26PDF 564 KB
LabelID Label/Location Info2025-11-26PDF 60.6 KB
Test_setup_photosTest Setup Photos2026-05-26PDF 431.8 KB
Antenna SpecTest Report2025-11-26PDF 1.5 MB
SZ25070176W01_LoRa_DSS_FCCTest Report2025-11-26PDF 4.3 MB
Attestation_Statements_Part2.911(d)(5)Attestation Statements2025-11-26PDF 110.7 KB
Attestation_Statements_Part2.911(d)(7)Attestation Statements2025-11-26PDF 123.9 KB
Confidentiality_Request_LetterCover Letter(s)2025-11-26PDF 122.4 KB
Modular_Approval_ChecklistCover Letter(s)2025-11-26PDF 234.9 KB
POACover Letter(s)2025-11-26PDF 15.6 KB
SZ25070176S01_FCC_RF ExposureRF Exposure Info2025-11-26PDF 314.2 KB
Block_Diagram Metadata onlyBlock DiagramPDF 189.2 KB
Schematics Metadata onlySchematicsPDF 311.6 KB
Operational_Description Metadata onlyOperational DescriptionPDF 102.7 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 474.2 KB

Application Information

Application IDq8fgUQLT9+b8IF9KcgBDKA==
Final Action Date2025-11-26
Application PurposeOriginal Equipment
Applicant FRN0027026012
ModelL-LRNWB28
Frequency Range902.4-926.025 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionLierda Feng Series WB28 LoRa Mesh Module
Responsible PartyWeiBing Liu, liuweib@lierda.com , 86-18067988373
Test FirmMr. Su Feng, Shenzhen Morlab Communications Technology Co. Ltd., Zx.sun@morlab.cn , 86-755-36698566
TCB Emailbentje.holger@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Long-Term ConfidentialityYes
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
q8fgUQLT9+b8IF9KcgBDKA==2025-11-26Original Equipment

Equipment Authorization

FrequencyOutputRules
902.4-926.025 MHz0.1358315C

Grants

TCB Grant - Application q8fgUQLT9+b8IF9KcgBDKA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 11/26/2025

Application Dated: 11/26/2025
Zhejiang Lierda Internet of Things Technology Co., Ltd.
Room 1402, Building 1, No. 1326, Wenyi West Road
Cangqian street, Yuhang District
HangZhou, Zhejiang Prov.,
China
 
Attention: LvJing Qiu , Certified Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AOFDL-LRNWB28
Name of Grantee:  Zhejiang Lierda Internet of Things Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Lierda Feng Series WB28 LoRa Mesh Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.4  -  926.025 0.13583  

Output power is maximum peak conducted.
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.