FCC ID 2AOHHTURBOXC450

TurboX C450 SOM

by Thundercomm Technology Co., Ltd

Grantee Code: 2AOHH   Product Code: TURBOXC450
Latest application date: 2021-05-17

FCC ID Device Details

FCC ID2AOHHTURBOXC450
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AOHH
Product CodeTURBOXC450
Applicant BusinessThundercomm Technology Co., Ltd 🇨🇳
Related Domains thundersoft.com morlab.cn
Equipment ClassTurboX C450 SOM
Test FirmShenzhen Morlab Communications Technology Co. Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2021-05-17
5180-5240 MHzOriginal Equipment2021-05-17
2402-2480 MHzOriginal Equipment2021-05-17

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2021-11-09PDF 1.3 MB
Users ManualUsers Manual2021-11-09PDF 1.4 MB
Internal PhotosInternal Photos2021-11-09PDF 1.6 MB
External PhotosExternal Photos2021-11-09PDF 472.3 KB
ID Label/Location InfoID Label/Location Info2021-05-17PDF 121.5 KB
Test Setup PhotosTest Setup Photos2021-11-09PDF 1.9 MB
Test Setup PhotosTest Setup Photos2021-11-09PDF 1.9 MB
Test Setup PhotosTest Setup Photos2021-11-09PDF 1.9 MB
Test ReportTest Report2021-05-17PDF 3.2 MB
Test Report_BLETest Report2021-05-17PDF 3.2 MB
Test Report_DFSTest Report2021-05-17PDF 1.7 MB
Test Report_NII-1Test Report2021-05-17PDF 4 MB
Test Report_NII-2Test Report2021-05-17PDF 3.6 MB
Test Report_WLANTest Report2021-05-17PDF 3.3 MB
ConfidentialityCover Letter(s)2021-05-17PDF 98.4 KB
FCC Authorization LetterCover Letter(s)2021-05-17PDF 70.1 KB
FCC DTS UNII DeclarationCover Letter(s)2021-05-17PDF 72.1 KB
FCC WIFI CH12-13 DeclarationCover Letter(s)2021-05-17PDF 62.7 KB
FCC modular approval requestCover Letter(s)2021-05-17PDF 79.1 KB
RF Exposure InfoRF Exposure Info2021-05-17PDF 374.8 KB
RF exposure InfoRF Exposure Info2021-05-17PDF 374.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 49 KB
Schematics Metadata onlySchematicsPDF 256.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 225.1 KB
Software Security Info Metadata onlyOperational DescriptionPDF 181.3 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 148 KB

Application Information

Application IDzwpUVRwIcKNLRWC1NkQi+Q==
Final Action Date2021-05-17
Application PurposeOriginal Equipment
Applicant FRN0027050566
ModelTURBOXC450
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionTurboX C450 SOM
Responsible PartyQiyong Zhou, Manager, Zhouqy0710@thundersoft.com , +86 010-82036511
AgentWendy Wendy Wendy, Shenzhen Morlab Communications Technology, wp.zhan@morlab.cn , 86075536698618
Technical ContactWendy Zhan, Shenzhen Morlab Communications Technology, wp.zhan@morlab.cn , 86075536698541
Non-Technical ContactWendy Zhan, Shenzhen Morlab Communications Technology, wp.zhan@morlab.cn , 86075536698541
Test FirmMr. Su Feng, Shenzhen Morlab Communications Technology Co. Ltd., Zx.sun@morlab.cn , +86 755 36698566
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date11/09/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.

Applications

Application IDDatePurpose
zwpUVRwIcKNLRWC1NkQi+Q==2021-05-17Original Equipment
xsCUaMJKvQCa19zXAt/33Q==2021-05-17Original Equipment
VnVVX2jYYCuZa7nhZi1R4Q==2021-05-17Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.015000015CCC
2402-2480 MHz0.002115CCC
2412-2462 MHz0.1215CCC
5180-5240 MHz0.01715ECC
5260-5320 MHz0.01615ECC, ND
5500-5720 MHz0.01715ECC, ND
5745-5825 MHz0.01515ECC

Grants

TCB Grant - Application zwpUVRwIcKNLRWC1NkQi+Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 05/17/2021

Application Dated: 05/12/2021
Thundercomm Technology Co., Ltd
Building 4, No. 99, Data Valley Middle Road
Xiantao District, Yubei District
Chongqing,
China
 
Attention: Qiyong Zhou , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AOHHTURBOXC450
Name of Grantee:  Thundercomm Technology Co., Ltd
Equipment Class: Digital Transmission System
Notes: TurboX C450 SOM
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0021  
CC 15C 2412.0  -  2462.0 0.12  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.
Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application zwpUVRwIcKNLRWC1NkQi+Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Thundercomm Technology Co., Ltd
Building 4, No. 99, Data Valley Middle Road Xiantao District, Yubei District
Chongqing,
China
  Date of Grant: 05/17/2021

Application Dated: 05/12/2021
 
Attention: Qiyong Zhou , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AOHHTURBOXC450
Name of Grantee:  Thundercomm Technology Co., Ltd
Equipment Class: Digital Transmission System
Notes: TurboX C450 SOM
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0021  
CC 15C 2412.0  -  2462.0 0.12  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application xsCUaMJKvQCa19zXAt/33Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 05/17/2021

Application Dated: 05/12/2021
Thundercomm Technology Co., Ltd
Building 4, No. 99, Data Valley Middle Road
Xiantao District, Yubei District
Chongqing,
China
 
Attention: Qiyong Zhou , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AOHHTURBOXC450
Name of Grantee:  Thundercomm Technology Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: TurboX C450 SOM
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.017  
CC ND 15E 5260.0  -  5320.0 0.016  
CC ND 15E 5500.0  -  5720.0 0.017  
CC 15E 5745.0  -  5825.0 0.015  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, 5290 MHz, 5530 MHz, 5610 MHz, 5690 MHz and 5775 MHz.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application xsCUaMJKvQCa19zXAt/33Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Thundercomm Technology Co., Ltd
Building 4, No. 99, Data Valley Middle Road Xiantao District, Yubei District
Chongqing,
China
  Date of Grant: 05/17/2021

Application Dated: 05/12/2021
 
Attention: Qiyong Zhou , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AOHHTURBOXC450
Name of Grantee:  Thundercomm Technology Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: TurboX C450 SOM
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.017  
CC ND 15E 5260.0  -  5320.0 0.016  
CC ND 15E 5500.0  -  5720.0 0.017  
CC 15E 5745.0  -  5825.0 0.015  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, 5290 MHz, 5530 MHz, 5610 MHz, 5690 MHz and 5775 MHz.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application VnVVX2jYYCuZa7nhZi1R4Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 05/17/2021

Application Dated: 05/12/2021
Thundercomm Technology Co., Ltd
Building 4, No. 99, Data Valley Middle Road
Xiantao District, Yubei District
Chongqing,
China
 
Attention: Qiyong Zhou , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AOHHTURBOXC450
Name of Grantee:  Thundercomm Technology Co., Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: TurboX C450 SOM
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.015  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application VnVVX2jYYCuZa7nhZi1R4Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Thundercomm Technology Co., Ltd
Building 4, No. 99, Data Valley Middle Road Xiantao District, Yubei District
Chongqing,
China
  Date of Grant: 05/17/2021

Application Dated: 05/12/2021
 
Attention: Qiyong Zhou , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AOHHTURBOXC450
Name of Grantee:  Thundercomm Technology Co., Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: TurboX C450 SOM
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.015  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: